Kinetic study of acid red “dye” removal by activated carbon and hyper-cross-linked polymeric sorbents Macronet Hypersol MN200 and MN300

New Methyl Methacrylate Derived Adsorbents - Synthesis, Characterization and Adsorptive Removal of Toxic Organic Compounds

This study aimed to synthesize polymeric adsorbents by suspension polymerization using methyl methacrylate (MMA) with different crosslinking monomers. Divinylbenzene (DVB) and aliphatic monomers: ethylene glycol dimethacrylate (EGDMA) or N,N'-methylenebisacrylamide (NN) containing additional amide groups were used. The possibility of using the prepared copolymers (MMA-NN, MMA-EGDMA, MMA-DVB) as adsorbents for the removal of toxic compounds such as dyes (C.I. Acid Red 18 (AR18), C.I. Acid Green 16 (AG16), C.I. Acid Violet 1 (AV1), C.I. Basic Yellow 2 (BY2), C.I. Basic Blue 3 (BB3) and C.I. Basic Red 46 (BR46)) and phenol (PhOH) from dye baths and effluents was evaluated. Preferential adsorption of basic-type dyes compared to acid-type dyes or phenol was observed by the polymers. Adsorbent based on MMA-EGDMA exhibited the highest capacity for investigated dyes and phenol. The pseudo-second order kinetic model as well as the intraparticle diffusion model can find application in predicting sorption kinetics. Based on the equilibrium sorption data fitted to the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich model, uptake of BB3, AV1 and PhOH is rather physisorption than chemisorption. The regeneration yield of MMA-EGDMA does not exceed 60 % using 1 M HCl, 1 M NaCl, and 1 M NaOH in 50 %v/v methanol.

Carboxymethyl Cellulose/Polyacrylamide/Fe3O4 Magnetic Ion Imprinting Biosorbent for Removal and Recovery of La3

To use resources rationally, the recovery and recycling of rare earth (RE) from industrial sewage have attracted a lot of attention. Herein, a polymer adsorbent CMC/PAM/Fe3O4 (CPF) was synthesized from renewable carboxymethyl cellulose (CMC), polyacrylamide (PAM), and Fe3O4 by the template of La3+ using ion imprinting technology. The CPF was characterized with X-ray diffraction (XRD), IR, X-ray photoelectron spectroscopy (XPS), and scanning electron microscope (SEM), and results show that PAM and CMC can crosslink with each other and form copolymers with Fe3O4 particles dispersing in it. The adsorption properties for the template ions La3+ were fully studied. It is found that CPF exhibited good adsorption performance with an adsorption capacity of 34.6 mg·g-1. Cycling experiments show that CPF still has high efficiency even after 5 cycles. Meanwhile, the desorption rate can reach more than 98%. The low wastage and high adsorption/desorption efficiency would enable CPF to be a good candidate adsorbent for removal/recovery of La3+ from industrial sewage.

Synthesis process and adsorption performance of temperature-sensitive ion-imprinted porous microspheres (ReO4−-TIIM) for the selective separation of ReO4−

The adsorption–desorption process of imprinted microspheres is controlled by changing the temperature conditions of the external environment.

Polyaniline/Glauconite Nanocomposite Adsorbent for Congo Red Dye from Textile Wastewater

Glauconite (Gl), a naturally occurring clay material, was utilized as an affordable and ecologically friendly adsorbent to explore its capturing capacity towards Congo red (CR) dye from textile industrial waste effluent. To improve adsorption and removal effectiveness, a modification technique utilizing polyaniline (PAN) was investigated. An X-ray diffractometer (XRD), a scanning electron microscope (SEM), and Fourier transformer infrared (FTI-R) were applied as strong familiar characterization techniques for all used adsorbents. The effects of starting concentration, contact duration, adsorbent dose, pH, and temperature on the adsorption process were also studied. The reusability of the adsorbent was studied over four adsorption cycles. The results show that PAN modification of Gl enhances the effectiveness of CR elimination. The clearance efficiency of raw and modified glauconite at 25 °C and pH 7 was 77% and 91%, respectively. The kinetics and isotherms of Congo red dye adsorption were investigated using batch studies to determine the impacts of various experimental conditions. The maximum adsorption capacity of the glauconite/polyaniline (Gl/PAN) nanocomposite rose from 11.9 mg/g for Gl to 14.1 mg/g in accordance with the isotherm analysis, which shows that the Langmuir isotherm properly characterizes the experimental data. The pseudo-second-order model (R2 = 0.998) properly expresses the experimental data. The reusability research proved that the adsorbents may be reused effectively. The overall results suggest that the modified Gl by PAN might be used as a low-cost, natural adsorbent for eliminating CR color from textile effluent.

Selective identification and separation of ReO4- by biomimetic flexible temperature-sensitive imprinted composite membranes

A new type of temperature-sensitive imprinted composite membranes(ICMs) was developed. Poly N,N-diethylacrylamide (DEA) blocks, as temperature-sensitive polymer, were grafted onto the substrate of the imprinted polymer separation layer to endow membranes with better adsorption effect. The comprehensive properties of the imprinted composite membranes were adequately tested and evaluated in detail. Results showed that ReO₄^- -ICMs (Re-ICMs) with temperature-sensitive recognition sites could adjust the structure of the imprinted holes at different temperatures, which presented excellent performance in the selective separation and purification of ReO₄^-. The prepared Re-ICMs exhibit the maximum adsorption capacity of 0.1639 mmol/g at 35 °C with the equilibrium adsorption time of 2 h. After ten adsorption/desorption cycles, Re-ICMs could still maintain 73.5% of the original adsorption capacity, the separation degree of ReO₄^-/MnO₄^- was only reduced from the initial 24.5 to 15.9, and the desorption ratio dropped from 80.4% to 68.4%, indicating that Re-ICMs have excellent adsorption and separation performance and reusability.

Study on Synthesis and Adsorption Properties of ReO4 - Ion-Imprinted Polymer

In this work, an ion imprinted polymer (ReO₄ ^--IIP) of the perrhenate ion based on acrylamide (AM) and acrylic acid (AA) was prepared by solution polymerization using ReO₄ ^- as a template ion, N,N-methylenebisacrylamide (NMBA) as cross-linkers, hydrogen peroxide-vitamin C (H₂O₂-Vc) as an initiator, and a mixed solution of water (H₂O) and methanol (CH₃OH) with volume ratio v(H₂O)/v(CH₃OH) = 3:7 as a solvent. During the process of synthesis condition investigation and optimization, the adsorption capacity (Q) and the separation degree (R) in the equimolar concentration mixture solutions of NH₄ReO₄ and KMnO₄ were adopted as indexes, and the obtained optimal conditions were as follows: the molar ratios of NMBA, NH₄ReO₄, AA, H₂O₂, and Vc to AM were 5.73, 0.052, 1.29, 0.02, and 0.003, and the temperature and time of polymerization were 40 °C and 28 h, respectively. Under optimal conditions, the sample with indexes, Q and R of 0.064 mmol/g and 3.20, were harvested. What is more, a further reusability study found that good adsorption selectivity was maintained after repeating the experiment 9 times. Taking the non-IP prepared under the same conditions as a control, Fourier transform infrared spectroscopy, transmission electron microscopy, and Brunauer Emmett Teller were used to characterize the structure of the ReO₄ ^--IIP prepared under the optimal conditions. Finally, the kinetic study results showed that the zero-order kinetic model could better describe the adsorption process. The thermodynamic study results showed that the Langmuir model was more suitable for describing the isotherm adsorption process of the IIP.

Kinetic and thermodynamic studies of sulforaphane adsorption on macroporous resin

The adsorption equilibrium, kinetic and thermodynamic of sulforaphane (SF) adsorption onto macroporous resin in aqueous phase were studied. The SP850 resin was screened as the appropriate resin for SF purification. From the equilibrium studies, the Redlich-Peterson model was found to be the best for description of the adsorption behavior of SF onto SP850 resin, followed by the Freundlich model and the Langmuir model. Batch equilibrium experiments demonstrated that, in the examined temperature range, the equilibrium adsorption capacity of SP850 resin decreased with increasing adsorption temperature. Thermodynamics studies indicated that the adsorption of SF was a physical, exothermic, and spontaneous process. The adsorption kinetics revealed that the pseudo-second-order kinetic model was suitable to characterize the kinetics of adsorption of SF onto SP850. Finally, the intra-particle diffusion model demonstrated that SF diffused quickly into macropores, and that diffusion slowed down in the meso- and micropores.

Dye adsorbed on copolymer, possible specific sorbent for metal ions removal

The efficiency of styrene-divinylbenzene functionalized with trimethylamonium groups as sorbent for the direct dye removal from aqueous solutions was investigated.

Magnetic pollen grains as sorbents for facile removal of organic pollutants in aqueous media

Plant materials have long been demonstrated to sorb organic compounds. However, there are no known reports about pollen grains acting as sorbents to remove hydrophobic organic compounds (HOCs) such as pesticides, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) from contaminated waters. We report a facile and effective method to remove HOCs from water using magnetized short ragweed (Ambrosia artemisiifolia) pollen grains. We dispersed the magnetized pollen grains in two different water samples - deionized (DI) and natural storm water to mimic real environmental conditions likely to be encountered during treatment. The magnetized pollen grains were readily separated from the aqueous media via a magnetic field after adsorption of the HOCs. We measured the adsorption of five representative HOCs (acenaphthene, phenanthrene, atrazine, diuron, and lindane) onto magnetized ragweed pollen in different aqueous matrices. We demonstrate that the adsorption capacity of the magnetized ragweed pollen can be regenerated to a large extent for reuse as a sorbent. Our results also indicate that the magnetized pollen grains are as effective as activated carbon (AC) in removing HOCs from both types of contaminated waters. The high HOC sorption of the ragweed pollen allows it to have potential remediation application in the field under realistic conditions.

Sorption properties of greenwaste biochar for two triazine pesticides

Biochar is a carbon-rich product generated from biomass through pyrolysis. This study evaluated the ability of an unmodified biochar to sorb two triazine pesticides - atrazine and simazine, and thereby explored potential environmental values of biochar on mitigating pesticide pollution in agricultural production and removing contaminants from wastewater. A greenwaste biochar was produced by heating waste biomass under the oxygen-limited condition at 450 degrees C. The effects of several experimental parameters, including biochar particle size, contact time, solid/solution ratio, and solution pH on the sorption of atrazine and simazine were comprehensively investigated. The biochar with small particle size needed less time to reach sorption equilibrium. The sorption affinity of the biochar for the two pesticides increased with decreasing solid/solution ratio. The sorbed amounts (C(s)) of atrazine and simazine increased from 451 to 1158 mg/kg and 243 to 1066 mg/kg, respectively, when the solid/solution ratio decreased from 1:50 to 1:1000 (g/mL). The sorption of the biochar for both pesticides was favored by low pH. The sorption isotherms of atrazine and simazine on the biochar are nonlinear and follow a Freundlich model. When atrazine and simazine co-existed, a competitive sorption occurred between these two pesticides on the biochar, reflecting a decrease in sorption capacity (K(f)) from 435 to 286 for atrazine and from 514 to 212 for simazine. Combined adsorption and partition mechanisms well depicted sorption of atrazine and simazine on carbonized and noncarbonized fractions of the biochar in the single-solute and co-solute systems.

Comparison of the efficiency of activated carbon and neutral polymeric adsorbent in removal of chromium complex dye from aqueous solutions

The removal efficiency of chromium complex dye Lanasyn Navy M-DNL from aqueous solution using the activated carbon (AC) and the neutral polymeric adsorbent Macronet MN 200 (MN 200) has been investigated under various experimental conditions: initial dye concentration, pH and temperature. The effectiveness of MN 200 for the dye removal was found relatively higher than that of AC in both acidic and neutral solutions. Two theoretical models (pseudo-second-order-reaction and intraparticle diffusion) were used to describe the sorption kinetics, and to determine the constants of sorption rate (k(2)), intraparticle (k(i)) and film diffusion (k(s)). The both sorption systems dye-AC and dye-MN 200 follow the pseudo-second-order model with a higher k(2) value for dye-MN 200 in acidic media at 20 degrees C when compared with that of the dye-AC. With increase in the solution temperature from 20 to 40 degrees C the k(2) value for dye-AC indicate an increase in acidic media and decrease in alkaline media; whereas k(2) values for dye-MN 200 decrease in both acidic and neutral media. The rate of dye adsorption on both adsorbents is dependent on intraparticle and film diffusion proceeding simultaneously. The boundary layer effect is more pronounced in acidic solutions and with increase in temperature.

Efficient removal of aromatic sulfonates from wastewater by a recyclable polymer: 2-naphthalene sulfonate as a representative pollutant

As a family of hydrophobic ionizable organic compounds, aromatic sulfonates can be present at high levels in industrial wastewaters. They tend to exist as anions over a wide range of pH and cannot be effectively trapped by conventional adsorbents. In the current study, a recyclable acrylic ester polymer (NDA-801) was synthesized for effective removal of aromatic sulfonates from wastewater of high acidity (e.g., pH < 1) and inorganic salts (e.g., approximately 5-10% Na2SO4 in mass), for which sodium 2-naphthalene sulfonate (2-NS) was chosen as a representative target contaminant 2-NS uptake onto NDA-801 increased with the increasing acidity of the solution. The zeta potential of NDA-801 measured at different pH levels as well as batch 2-NS adsorption from methanol/water binary systems demonstrated the favorable roles of electrostatic and hydrophobic interaction in 2-NS adsorption. As compared to a granular activated carbon GAC-1, NDA-801 exhibited much higher removal efficiency and capacity of 2-NS in fixed-bed adsorption. Moreover, the exhausted NDA-801 beads by 2-NS can be completely regenerated by water wash for repeated use, which is more economically desirable than by other regenerants, such as NaOH solution. Continuous column adsorption-regeneration cycles indicated negligible capacity loss of NDA-801 during operation and further validated its feasibility for potential application in associated wastewater treatment.