Direct introduction of phosphonate by the surface modification of polymers enhances biocompatibility

Solvent-Free Synthesis of Phosphonic Graphene Derivative and Its Application in Mercury Ions Adsorption

Functionalized graphene was efficiently prepared through ball-milling of graphite in the presence of dry ice. In this way, oxygen functional groups were introduced into material. The material was further chemically functionalized to produce graphene derivative with phosphonic groups. The obtained materials were characterized by spectroscopic and microscopic methods, along with thermogravimetric analysis. The newly developed material was used as an efficient mercury adsorbent, showing high adsorption efficiency. The adsorption isotherms were fitted using Freundlich and Langmuir models. The adsorption kinetics were fitted with pseudo-first order and pseudo-second order models. Adsorption selectivity was determined in the presence of cadmium ions and nickel ions. The presence of mentioned bivalent ions in the solution did not affect mercury adsorption efficiency.

Photochromic Materials by Postpolymerisation Surface Modification

Photochromic materials are available by a postpolymerization surface modification of diverse polymers in a multistep sequential process mediated, first, by carbene insertion chemistry, second, by diazonium coupling with a tethered precursor, and finally by coupling to a spiropyran. This three-step sequence is efficient, and surface loading densities of 10¹³ molecules cm^-2 are typically achievable, leading to materials with observable photochromic and wettability behavior, which operate over multiple cycles without significant photobleaching or loss of efficacy. Materials suitable for application in this process include both reactive, but also lower surface energy polymers. Although the process is particularly efficient for high surface area materials, surface modification onto lower surface area substrates, while being intrinsically less efficient, is nonetheless sufficiently effective that changes in macroscopic photochromic properties are readily observable.

Preparation, Post-Modification, and Antibacterial Application of Gelatin Electrospun Membranes

Two bis(diaryldiazomethane)s substituted with amino groups are synthesized and used for the surface modification of membranes electrospun from gelatin. These membranes are then reacted with tolylene-2,4-diisocyanate to give urea-functionalized materials, so that hydrogen peroxide can be reversibly bound onto their surface. These membranes are characterized by scanning electron microscopy, XPS, differential scanning calorimeter, and tensile test to show their surface properties and bulk properties. The surface modification with amino-substituted diazomethanes and the subsequent cross-linking reaction with diisocyanates contribute to high loadings of hydrogen peroxide, and greatly increase the antibacterial activity of gelatin-derived membranes, which open a new horizon in the preparation of high loading antiseptic/antibacterial biomacromolecular surfaces and interfaces.

Surface modification using crosslinking of diamine and a bis(diarylcarbene): synthesis, characterization, and antibacterial activity via binding hydrogen peroxide

Modification of polymer beads with a functionalized bis(arylcarbene) provides access to materials with biocidal properties.

New Routes to Functionalize Carbon Black for Polypropylene Nanocomposites

Methods for chemical surface functionalization for carbon black (CB) nanoparticles were studied to produce (CB)/polypropylene (PP) nanocomposites with superior electrical and thermal properties. Nanoparticle dispersion is known to directly control the extent to which nanocomposites maximize the unique attributes of their nanoscale fillers. As a result, tailored nanoparticle surface chemistry is a widely utilized method to enhance the interfacial interactions between nanoparticles and polymer matrices, assisting improved filler dispersion. In this work, a rapid chemical functionalization approach using a number of diarylcarbene derivatives, followed by the azo-coupling of substituted diazonium salts, for the covalent introduction of selected functional groups to the CB surface, is reported. Characterization of the modified CB by XPS, TGA, CHN, and ATR-IR collectively confirmed surface functionalization, estimating surface grafting densities of the order of 10(13) and 10(14) molecules/cm(2). Nanocomposites, synthesized by solvent mixing PP with pristine and modified CB, demonstrated macroscopic property changes as a result of the nanoparticle surface functionalization. Pronounced improvements were observed for PP nanocomposites prepared with a dodecyl-terminated diaryl functionalized CB, in which TEM analysis established improved nanofiller dispersion owing to the enhanced CB-PP interfacial interactions in the nanocomposite. Observed dielectric relaxation responses at 20 wt % loading and a reduced percolation threshold realized conductivities of 1.19 × 10(-4) S cm(-1) at 10 wt %, compared to 2.62 × 10(-15) S cm(-1) for pristine CB/PP nanocomposites at the same filler loading. In addition, thermal properties signify an increase in the number of nucleation sites by the raised degree of crystallinity as well as increased melting and crystallization temperatures.

Surface modification of polymers with bis(arylcarbene)s from bis(aryldiazomethane)s: preparation, dyeing and characterization

Modification of polymer beads by a series of bis(arylcarbene) provides materials with different surface chemical characteristics, and a subsequent dyeing process generates colored polymers with a variety of surface functional groups.

Fabrication of porous chitosan-polyvinyl pyrrolidone scaffolds from a quaternary system via phase separation

Three-dimensional porous chitosan-polyvinyl pyrrolidone (PVP) scaffolds were fabricated for tissue engineering applications via liquid-liquid or liquid-solid phase separation. A mixture of an acidic aqueous solution with butanol as a non-solvent and a chitosan-PVP quaternary system were freeze-dried. We then studied the homogenous open pore structure and the minute pore distribution in order to improve the mass transfer and cell seeding efficiency while also obtaining the optimal ratio of PVP to provide high interconnectivity and to improve the open-pore structure. The properties of the porous chitosan-PVP scaffolds - including the microstructure, chemical release, water absorption properties, and cell proliferation tests were studied - and the results were compared against those obtained from conventional scaffolds. chitosan-PVP scaffolds with a porosity of over 70% were obtained, and the pore morphology on the surface and within the porous scaffolds showed the presence of homogenous open pores with excellent interconnectivity. As the PVP content increased, main pores (50-100 μm) and minute pores (4-10 μm) could be clearly observed. Also, the porous scaffold showed an improved efficiency for cell adhesion after the cells were cultured for 4 h. After 72 h, the cultured cells presented an increase in the cell proliferation and on the porous scaffolds. These results strongly suggest that the porous chitosan-PVP scaffolds can be widely used in tissue engineering, including for biopatches and artificial skin applications.

Surface functional polymers by post-polymerization modification using diarylcarbenes: introduction, release and regeneration of hydrogen peroxide and bactericidal activity

Functionalized diarylcarbenes are excellent reactive intermediates suitable for the direct surface modification of organic polymers, and these may be used to introduce urea and thiourea functions onto polystyrene at loading levels of up to 2.3 x 10(13) molecules/cm(2). These functions are capable of the reversible binding and release of peroxide at loading levels of up to 0.6 mmol/g and give polymers that display biocidal activity against a spectrum of gram-positive and gram-negative bacteria.