Adsorption and recognition of protein molecular imprinted calcium alginate/polyacrylamide hydrogel film with good regeneration performance and high toughness

Multichannel Multijunction Droplet Microfluidic Device to Synthesize Hydrogel Microcapsules with Different Core-Shell Structures and Adjustable Core Positions

Core-shell hydrogel microcapsules have sparked great interest due to their unique characteristics and prospective applications in the medical, pharmaceutical, and cosmetic fields. However, complex synthetic procedures and expensive costs have limited their practical application. Herein, we designed and prepared several multichannel and multijunctional droplet microfluidic devices based on soft lithography for the effective synthesis of core-shell hydrogel microcapsules for different purposes. Additionally, two different cross-linking processes (ultraviolet (UV) exposure and interfacial polymerization) were used to synthesize different types of core-shell structured hydrogel microcapsules. Hydrogel microcapsules with gelatin methacryloyl (GelMA) as the core and polyacrylamide (PAM) as the thin shell were synthesized using UV cross-linking. Using an interfacial polymerization process, another core-shell structured microcapsule with GelMA as the core and Ca2+ cross-linked alginate with polyethylenimine (PEI) as the shell was constructed, and the core diameter and total droplet diameter were flexibly controlled by carving. Noteworthy, these hydrogel microcapsules exhibit stimuli-responsiveness and controlled release ability. Overall, a novel technique was developed to successfully synthesize various hydrogel microcapsules with core-shell microstructures. The hydrogel microcapsules possess a multilayered structure that facilitates the coassembly of cells and drugs, as well as the layered assembly of multiple drugs, to develop synergistic therapeutic regimens. These adaptable and controllable hydrogel microdroplets shall held great promise for multicell or multidrug administration as well as for high-throughput drug screening.

Bovine Serum Albumin Molecularly Imprinted Electrochemical Sensors Modified by Carboxylated Multi-Walled Carbon Nanotubes/CaAlg Hydrogels

In this paper, sodium alginate (NaAlg) was used as functional monomers, bovine serum albumin (BSA) was used as template molecules, and calcium chloride (CaCl2) aqueous solution was used as a cross-linking agent to prepare BSA molecularly imprinted carboxylated multi-wall carbon nanotubes (CMWCNT)/CaAlg hydrogel films (MIPs) and non-imprinted hydrogel films (NIPs). The adsorption capacity of the MIP film for BSA was 27.23 mg/g and the imprinting efficiency was 2.73. The MIP and NIP hydrogel film were loaded on the surface of the printed electrode, and electrochemical performance tests were carried out by electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) using the electrochemical workstation. The loaded MIP film and NIP film effectively improved the electrochemical signal of the bare carbon electrode. When the pH value of the Tris HCl elution solution was 7.4, the elution time was 15 min and the adsorption time was 15 min, and the peak currents of MIP-modified electrodes and NIP-modified electrodes reached their maximum values. There was a specific interaction between MIP-modified electrodes and BSA, exhibiting specific recognition for BSA. In addition, the MIP-modified electrodes had good anti-interference, reusability, stability, and reproducibility. The detection limit (LOD) was 5.6 × 10-6 mg mL-1.

Preparation and Characterization of Protein Molecularly Imprinted Poly (Ionic Liquid)/Calcium Alginate Composite Cryogel Membrane with High Mechanical Strength for the Separation of Bovine Serum Albumin

In order to improve the mechanical strength and imprinting efficiency, a novel bovine serum albumin (BSA) molecularly imprinted poly(ionic liquid)/calcium alginate composite cryogel membrane (MICM) was prepared. The results of the tensile test indicated that the MICM had excellent mechanical strength which could reach up to 90.00 KPa, 30.30 times higher than the poly (ionic liquid) membrane without calcium alginate; the elongation of it could reach up to 93.70%, 8.28 times higher than the poly (ionic liquid) membrane without calcium alginate. The MICM had a very high welling ratio of 1026.56% and macropore porosity of 62.29%, which can provide effective mass transport of proteins. More remarkably, it had a very high adsorption capacity of 485.87 mg g-1 at 20 °C and 0.66 mg mL-1 of the initial concentration of BSA. Moreover, MICM also had good selective and competitive recognition toward BSA, exhibiting potential utility in protein separation. This work can provide a potential method to prepare the protein-imprinted cryogel membrane with both high mechanical strength and imprinting efficiency.

CO2-Responsive Spherical Polyelectrolyte Brush with Multi-Stimulation for Reversible Protein Immobilization and Release

Multi-responsive materials have received extensive interest in many areas due to their smart characteristics. This paper presents rationally designed multi-responsive spherical polyelectolyte brushes composed of a solid polystyrene (PS) core and a poly (2-(dimethylamino) ethyl methacrylate) (PDMAEMA) shell synthesized by photoemulsion polymerization. Based on dynamic light scattering, Zeta potential, turbidity measurements, isothermal titration calorimetry, and UV-vis spectroscopy, PS-PDMAEMA works as a good potential adsorbent for bovine serum albumin (BSA) for which the maximum adsorption capability could reach up to 5190mg g−1. Moreover, the immobilization and release of protein on the polymer brush could be adjusted with different triggers, including the pH, ionic strength, and temperature. Furthermore, the green gas triggers, CO2 and N2, could be employed in the BSA@ PS-PDMAEMA system by easily bubbling over many cycles without any salt accumulation. The main reason for the observed actions is the brushes could be switched alternately between extended and collapsed states with different stimulations. Upon comparing the circular dichroism spectra of original and released BSA after many cycles of adsorption and release, it’s clear that the protein can retain its initial biological activity after release from the PS-PDMAEMA. This work provides an effective and green way to immobilize and release proteins in biotechnology.

Matrix-specific mechanism of Fe ion release from laser-generated 3D-printable nanoparticle-polymer composites and their protein adsorption properties

Nanocomposites have been widely applied in medical device fabrication and tissue-engineering applications. In this context, the release of metal ions as well as protein adsorption capacity are hypothesized to be two key processes directing nanocomposite-cell interactions. The objective of this study is to understand the polymer-matrix effects on ion release kinetics and their relations with protein adsorption. Laser ablation in macromolecule solutions was employed for synthesizing Au and Fe nanoparticle-loaded nanocomposites based on thermoplastic polyurethane (TPU) and alginate. Confocal microscopy revealed a three-dimensional homogeneous dispersion of laser-generated nanoparticles in the polymer. The physicochemical properties revealed a pronounced dependence upon embedding of Fe and Au nanoparticles in both polymer matrices. Interestingly, the total Fe ion concentration released from alginate gels under static conditions decreased with increasing mass loadings, a phenomenon only found in the Fe-alginate system and not in the Cu/Zn-alginate and Fe-TPU control system (where the effects were proportioonal to the nanoparticle load). A detailed mechanistic examination of iron the ion release process revealed that it is probably not the redox potential of metals and diffusion of metal ions alone, but also the solubility of nano-metal oxides and affinity of metal ions for alginate that lead to the special release behaviors of iron ions from alginate gels. The amount of adsorbed bovine serum albumin (BSA) and collagen I on the surface of both the alginate and TPU composites was significantly increased in contrast to the unloaded control polymers and could be correlated with the concentration of released Fe ions and the porosity of composites, but was independent of the global surface charge. Interestingly, these effects were already highly pronounced at minute loadings with Fe nanoparticles down to 200 ppm. Moreover, the laser-generated Fe or Au nanoparticle-loaded alginate composites were shown to be a suitable bioink for 3D printing. These findings are potentially relevant for ion-sensitive bio-responses in cell differentiation, endothelisation, vascularisation, or wound healing.

A Portable Visual Sensor by Molecularly Imprinted Hydrogels for HRP Recognition

Background:

Molecular imprinting is a technology used to produce artificial receptors that simulate the molecular recognition in the nature and prepare the polymer network structure in the presence of template molecule. Molecularly imprinted visual sensor combines the advantages of specific recognition via molecular imprinting and fast response speed via visualization. The aims of this paper are to prepare a portable visual sensor for Horseradish Peroxidase (HRP) recognition based on molecularly imprinted hydrogel.

Methods:

At first, HRP-imprinted polyacrylamide hydrogels with 1 mm thickness were obtained by one-step synthesis via radical induced in-situ polymerization of acrylamide using acrylamide (AAm) as the functional monomer, N,N'-Methylenebisacrylamide (MBA) as the crosslink agent and HRP as the template molecule.

Results:

Compared with nonimprinted hydrogels, the HRP-imprinted hydrogel sensor showed significant color changes in response to the target HRP. This visual sensor was constructed based on 3, 3', 5, 5'- tetramethyl benzidine (TMB) - H2O2 color reaction system by HRP catalyzing to produce color change through digital photography and image analysis (RGB system). The HRP-imprinted hydrogel showed good response in the range of 0.001-0.5 mg/mL and had a significant specific recognition compared to other proteins via selective test.

Conclusion:

The proposed portable visual sensor could be used for qualitative and semi-quantitative analysis of HRP with high selectivity and reasonable regeneration. The sensor has the advantages of simple operation, low cost, no special equipment, and can be applied to serum sample with less sample consumption and no need of sample preparation. It has wide application prospects in microfluidic devices, biomimetic sensors, flexible biosensor and membrane separation technology.

Highly recyclable and super-tough hydrogel mediated by dual-functional TiO2 nanoparticles toward efficient photodegradation of organic water pollutants

A novel photocatalytic hydrogel was prepared by loading TiO₂ nanoparticles (TiO₂ NPs) onto the surface of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized chitin nanofibers (TOCNs), which were further incorporated into the polyacrylamide (PAM) matrix. The resultant hydrogel exhibited a macro-porous structure with a low density (~1.45 g/cm³) and high water content (~80%). The well-dispersed TiO₂ NPs not only acted as a crosslinking agent for bridging the three-dimensional porous network structure, but also endowed the hydrogel with good catalytic activity. After the introduction of TiO₂ accounting for 10 wt% of the hydrogel mass, the hydrogels showed compressive strength of 1.46 MPa at 70% strain, tensile stress of 316 kPa, tensile strain of 310%, toughness of 47.25 kJ/m³ and fatigue resistance. Compared with neat TOCN-PAM hydrogel, the uniaxial compressive and tensile strengths of the TiO₂-TOCN-PAM10 hydrogel increased 6.35-fold and 3.70-fold, respectively. Furthermore, the removal of methyl orange (MO) was attributed to the synergistic effect of the adsorption and photocatalytic degradation of the hydrogels. The hydrogels adsorbed up to 8.5% of MO after 150 min of adsorption and a photocatalytic degradation rate of 97.3% achieved after 90 min of UV irradiation at pH = 2. Especially, the TiO₂-TOCN-PAM10 hydrogel exhibited excellent recycling performance: its MO removal efficiency was around 96% even after 10 reuse cycles. The as-prepared hydrogels, with characteristics of excellent stretchability, photocatalytic activity and recyclability, are expected to be used in alleviating organic pollutants in practical wastewater treatments.

Removal of Dyes and Cd2+ in Water by Kaolin/Calcium Alginate Filtration Membrane

Kaolin/calcium alginate (kaolin/CaAlg) free-standing membranes were prepared by adding different amounts of Kaolin into the sodium alginate (NaAlg) casting solution and crosslinked by Ca2+ using urea as porogen agent. The morphology of the kaolin/CaAlg filtration membrane was characterized by scanning electron microscope (SEM). Then the kaolin/CaAlg membrane was used for the removal of dyes and Cd2+. The kaolin significantly improved the mechanical behavior and flux of the kaolin/CaAlg membrane. The flux reached 17.53 L/m2·h at 0.1 MPa and when the content of Kaolin in NaAlg was 70 wt.%. The filtration of BSA solution and oil-water emulsion indicated that the kaolin/CaAlg composite filtration membrane exhibited good anti-fouling properties. The rejection of Brilliant Blue G250, Congo red, and methylene blue by the kaolin/CaAlg filtration membrane was 100%, 95.22%, and 62.86%, respectively. The removal rate of Cd2+ reached 99.69%, with a flux of 17.06 L/m2·h at 0.1 MPa.

A Neuro-Comparative Study between Single/Successive Thorium Dose Intoxication and Alginate Treatment

The adult male albino rats were grouped into five groups (control group and four variably treated groups with thorium (Th) in single or successive with or without alginate treatment). The IP administration of thorium nitrate (13.6 mg/kg b.wt.) induced a regional distribution and accumulation ordered as cerebellum > cerebral cortex > brain stem > hippocampus > hypothalamus > striatum. Also, it induces a significant increase in Na⁺, Ca²⁺, and Fe³⁺ ion content and malondialdehyde (MDA) level while K⁺ ions and glutathione (GSH) level were significantly decreased. On the other hand, the daily oral administration of 5% alginate showed a significant decreasing in the accumulation of thorium in the different brain areas and mitigated its hazardous effects. By the alginate treatment, Na⁺, Ca²⁺, Fe³⁺, and level of MDA were declined while K⁺ ions and GSH level showed a significant increase. The improvement of the investigated parameters was attributed to the specific chelating, regeneration, and antioxidant properties of the alginate. So, alginate administration could ameliorate the hazardous effects of thorium nitrate.

Efficient discovery and capture of new neuronal nitric oxide synthase-postsynaptic density protein-95 uncouplers from herbal medicines using magnetic molecularly imprinted polymers as artificial antibodies

In the scope of stroke treatment, new neuronal nitric oxide synthase-postsynaptic density protein-95 uncouplers from herbal medicines were discovered and captured. To do so, highly selective magnetic molecularly imprinted polymers with a core-shell structure were prepared as artificial antibodies. According to the results of computational simulations, we designed and synthesized various polymers with varying amounts and types of template, functional monomer, cross-linker, and solvent. Characterization and performance tests revealed that the most appropriate artificial antibodies showed uniform spherical morphologies, large adsorption capacities, fast-binding kinetics, high selectivity, and quick separation. These artificial antibodies were then used as sorbents for dispersive magnetic solid-phase extraction coupled with high-performance liquid chromatography and mass spectrometry to capture and identify structural analogs to ZL006 from extracts of Scutellariae radix, Psoraleae fructus, and Trifolium pratense. Furthermore, according to the neuroprotective effect and coimmunoprecipitation test, Baicalein, Neobavaisoflavone, Corylifol A, and Biochanin A can be the potential uncouplers of neuronal nitric oxide synthase-postsynaptic density protein-95. Therefore, this present study contributes valuable information for the discovery of neuronal nitric oxide synthase-postsynaptic density protein-95 uncouplers from herbal medicines.

Novel surface imprinted magnetic mesoporous silica as artificial antibodies for efficient discovery and capture of candidate nNOS–PSD-95 uncouplers for stroke treatment

Magnetic mesoporous silica imprinted materials as artificial antibodies for the discovery and capture of candidate nNOS–PSD-95 uncouplers for stroke treatment.

Synthesis of switchable intelligent molecularly imprinted polymers with selective adsorption of ethyl carbamate and their application in electrochemical sensor analysis

A cyclodextrin aldehyde based molecularly imprinted polymer with thermally responsive Diels–Alder (DA) linkages of grafted furan-type dienes was polymerized. The synthesized DA-MIP has dienophile characteristics and the specific absorption of ethyl carbamate (EC) can be switched on or off simply by thermal adjustment to 130 °C and 60 °C, respectively. The imprinting factors (α) of the MIP and rDA-MIP to EC were 6.2 and 5.0, and the selection factors (β) were 5.2 and 4.0, respectively. The restoration of the molecular target ratio was 88%, as determined by absorption and desorption experiments. The thermal restoration ratio, determined by thermal cycling experiments, was 78%. A new electrochemical sensor was prepared using the DA-MIP and its responsiveness for detecting trace amounts of EC was investigated. The results indicate that the electrode response has good affinity and excellent specific recognition performance for template molecular chemicals.

A cyclodextrin aldehyde based molecularly imprinted polymer with thermally responsive Diels–Alder (DA) linkages of grafted furan-type dienes was polymerized. The synthesized DA-MIP has dienophile characteristics and the specific adsorption of ethyl carbamate (EC) can be switched on or off simply by thermal adjustment.

Physically crosslinked-sacran hydrogel films for wound dressing application

The thin hydrogel films consisting of water-swollen polymer networks can potentially be applied for biomedical fields. Recently, natural polysaccharides have great attentions to be developed as wound healing and protection. In the present study, we newly prepared and characterized a physically crosslinked-hydrogel film composed of a novel megamolecular polysaccharide sacran for wound dressing application. We successfully fabricated a physically crosslinked-sacran hydrogel film by a solvent-casting method. The thickness of a sacran hydrogel film was lower than that of a sodium alginate (Na-alginate) film. Importantly, the swollen ratio of a sacran hydrogel film in water at 24h was 19-fold, compared to initial weight. Meanwhile, a Na-alginate hydrogel film was completely broken apart after rehydration. Moreover, a sacran hydrogel film did not show any cytotoxicity on NIH3T3 cells, a murine fibroblast cell line. The in vivo skin hydration study revealed that a sacran hydrogel film significantly increased the moisture content on hairless mice skin and considerably improved wound healing ability, compared to control (non-treated), probably due to not only the moisturing effect but also the anti-inflammatory effect of sacran. These results suggest that sacran has the potential properties as a basic biomaterial in a hydrogel film for wound dressing application.

Molecularly imprinted polymers for separating and sensing of macromolecular compounds and microorganisms

The present review article focuses on gathering, summarizing, and critically evaluating the results of the last decade on separating and sensing macromolecular compounds and microorganisms with the use of molecularly imprinted polymer (MIP) synthetic receptors. Macromolecules play an important role in biology and are termed that way to contrast them from micromolecules. The former are large and complex molecules with relatively high molecular weights. The article mainly considers chemical sensing of deoxyribonucleic acids (DNAs), proteins and protein fragments as well as sugars and oligosaccharides. Moreover, it briefly discusses fabrication of chemosensors for determination of bacteria and viruses that can ultimately be considered as extremely large macromolecules.