Effective adsorption of hexavalent chromium using biopolymer assisted oxyhydroxide materials from aqueous solution

Efficient removal of chromate from wastewater using a one-pot synthesis of chitosan cross-linked ceria incorporated hydrous copper oxide bio-polymeric composite

Remediating hexavalent chromium [Cr(VI)] from contaminated water systems is a significant concern due to its harmful effects on human health, aquatic life, and plants. To tackle this issue, scientists have created a chitosan cross-linked hydrous ceria incorporated cupric oxide bio-polymeric composite (CHCCO) by combining chitosan biopolymer with corresponding metal ions using glutaraldehyde as a cross-linker. The composite was characterized using advanced analytical instruments such as FTIR, p-XRD, SEM, XPS, etc. The synthesized composite (CHCCO) was then tested for its efficiency in removing Cr(VI) from synthetic Cr(VI) aqueous samples. The parameters examined included pH, material dose, contact time, concentration, temperature, and co-existing ions. The experimental data showed that the kinetics and equilibrium data fit well with the pseudo-second-order and the Freundlich isotherm models, respectively. Thermodynamic analysis demonstrated that the investigated surface adsorption process is spontaneous and endothermic. Except for the SO42- ion, no other species imparts adverse influence significantly on the reaction. The CHCCO bio-composite surfaces were refreshed using a dilute NaOH (1.0 M) solution and effectively recycled five times for Cr(VI) adsorption, indicating no significant surface activity deterioration. This study highlights the high effectiveness of CHCCO bio-polymeric composites in Cr(VI) remediation and the potential for this technology as an easy-to-use technique for environmental restoration.

Adsorption of chromium from electroplating wastewater using activated carbon developed from water hyacinth

Industrial wastewater polluted with high concentrations of Cr is commonly discharged into water resources without proper treatment. This gives rise to the deterioration of water quality and imposes adverse effects on public health. Therefore, this study is aimed at removing Cr from electroplating wastewater using activated carbon produced from water hyacinth under a full factorial experimental design with three factors and three levels (pH,2,5 and 8, adsorbent dose 0.5,1and1.5 in 100 mL and contact time 30, 60 and120 min). A phosphoric acid solution of 37% was used to activate the carbon, which was then subjected to thermal decomposition for 15 min at 500 °C. The activated carbon was characterized by the presence of a high surface area (203.83 m²/g) of BET, cracking of adsorbent beads of SEM morphology, amorphous nature of XRD, and many functional groups of FTIR such as hydroxyl (3283 cm^-1), alkane (2920 cm^-1), nitrile (2114 cm^-1) and aromatics (1613 cm^-1). The minimum Cr adsorption performance of 15.6% was obtained whereas maximum removal of 90.4% was recorded at the experimental condition of pH 2, adsorbent dose of 1.5 g/100 mL, and contact time of 120 min at a fixed value of initial Cr concentration of 100 mg/L. Similarly, the maximum Cr removal from real electroplating wastewater was 81.2% at this optimum point. Langmuir's model best described the experimental value at R² 0.96 which implies the adsorption is chemically bonded, homogeneous, and monolayer. Pseudo-second-order model best fits with the experimental data with R² value of 0.99. The adsorbent was regenerated for seven cycles and the removal efficiency decreased from 93.25% to 21.35%. Finally, this technology is promising to be scaled up to an industrial level.

ZnCo2O4 composite catalyst accelerated removal of phenylic contaminants containing of Cr(VI) in dielectric barrier discharge reactor: Process and mechanism study

The degradation of phenylic contaminants (phenol, hydroquinone, nitrobenzene, p-nitrophenol) containing Cr(VI) has been investigated in a dielectric barrier discharge (DBD) system using a ZnCo₂O₄ composite catalyst. The ZnCo₂O₄ nanowires combined with multi-walled carbon nanotubes (MWNTs) on a sponge substrate in the discharge system can induce a decrease in the corona inception voltage and discharge becomes more stable resulting in an improvement in the energy utilization efficiency. With the synergistic degradation of phenylic species containing Cr(VI), the total elimination efficiency was further improved. The active substances (H₂O₂ and O₃) were detected in the discharged solution, and some of them were consumed in the phenylic system. The effects of ·OH, O₂·^- and e^- were also verified using free radical trapping experiments in which ·OH exhibited the main oxidation effect for the degradation of phenylic pollutants, and e^-, H₂O₂ and H· affect the reduction of Cr(VI). The intermediate products were determined in order to analyze the degradation process of phenylic pollutants by the ZnCo₂O₄ composite catalyst in combination with the DBD system. The electron transfer process in the ZnCo₂O₄ composite catalyst during discharge was analyzed. Finally, the biotoxicity of the phenylic pollutants before and after degradation was compared.

Chromium toxicity and its remediation by using endophytic bacteria and nanomaterials: A review

Chromium (Cr) is a crucial element for all life forms. Various anthropogenic activities have been responsible for environmental contamination with Cr (VI) in recent years. For this review, articles were collected using electronic databases such as Web of Science, Pubmed, ProQuest, and Google Scholar as per the guidelines of PRISMA-2015, applying the Boolean search methods. Chromium can cause severe health complications in humans and animals and threatens the surrounding environment, with negative impacts on crop yield, development, and quality. Hence, monitoring Cr contamination is essential, and various remediation technologies have emerged in the past 50 years to reduce the amount of Cr in the environment. This review focuses on chromium exposure and the associated environmental health risks. We also reviewed sustainable remediation processes, with emphasis on nanoparticle and endophytic remediation processes.

Review on biopolymers and composites - Evolving material as adsorbents in removal of environmental pollutants

The presence of pollutants and toxic contaminants in water sources makes it unfit to run through. Though various conventional techniques are on deck, development of new technologies are vital for wastewater treatment and recycling. Polymers have been intensively utilized recently in many industries owing to their unique characteristics. Biopolymers resembles natural alternative to synthetic polymers that can be prepared by linking the monomeric units covalently. Despite the obvious advantages of biopolymers, few reviews have been conducted. This review focuses on biopolymers and composites as suitable adsorbent material for removing pollutants present in environment. The classification of biopolymers and their composites based on the sources, methods of preparation and their potential applications are discussed in detail. Biopolymers have the potentiality of substituting conventional adsorbents due to its unique characteristics. Biopolymer based membranes and effective methods of utilization of biopolymers as suitable adsorbent materials are also briefly elaborated. The mechanism of biopolymers and their membrane-based adsorption has been briefly reviewed. In addition, the methods of regeneration and reuse of used biopolymer based adsorbents are highlighted. The comprehensive content on fate of biopolymer after adsorption is given in brief. Finally, this review concludes the future investigations in recent trends in application of biopolymer in various fields in view of eco-friendly and economic perspectives.

Optimized removal of hexavalent chromium from water using spent tea leaves treated with ascorbic acid

Spent tea leaves were functionalized with ascorbic acid to obtain treated tea waste (t-TW) to encourage the adsorption of hexavalent chromium from water. The adsorption removal of Cr(VI) was systematically investigated as a function of four experimental factors: pH (2–12), initial Cr(VI) concentration (1–100 mg L⁻¹), t-TW dosage (0–4 g L⁻¹), and temperature (10–50 °C) by following a statistical experimental design. A central composite rotatable experimental design based on a response surface methodology was used to establish an empirical model that assessed the individual and combined effects of factors on adsorptive removal of Cr(VI). The model was experimentally verified and statistically validated then used to predict optimal adsorption removal of Cr(VI) from water. At optimized conditions, ≥ 99% of 1 mg L⁻¹ Cr(VI) can be removed by 4 g L⁻¹ t-TW at a pH of 9. The adsorptive mechanism was assessed by conducting kinetics and equilibrium studies. The adsorption of Cr(VI) by t-TW followed a pseudo-second-order kinetics model (k₂ = 0.001 g mg⁻¹ h⁻¹) and could be described by Langmuir and Temkin isotherms, indicating monolayer adsorption and predominantly adsorbate-adsorbent interactions. The t-TW exhibited a competitive Cr(VI) adsorption capacity of 232.2 mg g⁻¹ compared with the other low-cost adsorbents. These results support the utilization of tea waste for the removal of hazardous metal contaminants from aqueous systems.

The application of GO-Fe3O4 nanocomposite for chromium adsorption from tannery industry wastewater

The discharge of untreated tannery industrial wastewater into the environment has resulted in an adverse effect on the ecosystem and public health. Therefore, this work aimed to remove chromium ions from tannery wastewater through magnetite graphene oxide-nanocomposite (GO-Fe₃O₄). The experimental design of the study was a full factorial 2⁴ approach using pH, adsorbent dose, contact time, and initial chromium concentrations. The results of FTIR analysis revealed the presence of functional groups such as hydroxyl (3438 cm^-1), alcohol (1230 cm^-1), aromatic (1467 cm^-1), ketone (1629 cm^-1), and ether (1120 cm^-1). Similarly, GO-Fe₃O₄ acquired a high surface area of 296.2 m²/g whereas the XRD analysis showed the presence of predominant peaks which are attributed to the magnetite component. Moreover, the SEM image showed many ups and downs on the surface of the adsorbent. These cracks of morphology can create a conducive environment for the interaction of adsorbent and adsorbate. The maximum chromium removal of 95.9% was achieved at the optimum conditions of the initial chromium concentration of 40 mg/L, pH 4, adsorbent dose 1 g/100 mL, and contact time of 120 min whereas the removal of chromium from real tannery wastewater was found to be 90.3%. Based on the adsorption isotherm, the Langmuir model was the best fit for experimental data at R² 0.99, indicating homogeneous and monolayer adsorption. Finally, it can be concluded that GO-Fe₃O₄ was effective for chromium removal, which is a promising technology to be scaled up at the industrial level for wastewater treatment.

Investigating the hexavalent chromium removal from aqueous solution applying bee carcasses and corpses modified with Polyaniline

There are currently heavy metals in most industrial effluents which are among the most significant environmental pollutants. Hexavalent chromium is one of the most significant heavy metals. In this research for the first time, eliminating the hexavalent chromium from the aqueous medium/aquedia applying bee carcasses and corpses modified with polyethylene was examined. Adsorption experiments were conducted discontinuously on laboratory solutions, including hexavalent chromium. The optimal adsorption conditions such as different pH factors, contact time, initial chromium concentration, and adsorbent value on the adsorption rate were examined at different levels, and adsorption isotherms were plotted. Some adsorbent properties were examined using Field Emission Scanning Electron Microscopy, XRD analysis, Fourier Transform Infrared Spectroscopy, and BET test to study the properties of the synthesized adsorbent. This study indicated that the highest percentage of removal related to polyethylene composite and bee carcasses in the presence of polyethylene glycol was 50.56% among the bee carcasses composites. The parameters effective on the adsorption process for polyethylene composite and bee carcasses and losses in the presence of polyethylene glycol suggested that the adsorption percentage increased for this composite by decreasing the pH, increasing the contact time, and increasing the adsorbent. The highest percentage of adsorption was obtained when the pH was 2, the contact time was 120 min and the adsorbent value was 8 g/L and the initial concentration of chromium was 100 ppm. The most optimal removal percentage was achieved at the pH = 2, the contact time was 30 min, and the adsorbent value was 2 g/L, and the initial chromium concentration was 100 ppm. The results of drawing adsorption isotherms also indicated that higher R2 had a better fit than Langmuir for polyethylene composite and bee carcasses in the polyethylene glycol Freundlich equation.

Polysaccharide-based (nano)materials for Cr(VI) removal

Chromium is a potentially poisonous and carcinogenic species, which originates from human activities and various industries such as leather, steel, iron, and electroplating industries. Chromium is present in various oxidation states, among which hexavalent chromium (Cr(VI)) is highly toxic as a natural contaminant. Therefore, chromium, particularly Cr(VI), must be eliminated from the environment, soil, and water to overcome significant problems due to its accumulation in the environment. There are different approaches such as adsorption, ion exchange, photocatalytic reduction, etc. for removing Cr(VI) from the environment. By converting Cr(VI) to Cr(III), its toxicity is reduced. Cr(III) is essential for the human diet, even in small amounts. Today, biopolymers such as alginate, cellulose, gum, pectin, starch, chitin, and chitosan have received much attention for the removal of environmental pollutants. Biopolymers, particularly polysaccharides, are very useful compounds due to their OH and NH₂ functional groups and some advantages such as biodegradability, biocompatibility, and accessibility. Therefore, they can be widely applied in catalytic applications and as efficient adsorbents for the removal of toxic compounds from the environment. This review briefly investigates the application of polysaccharide-based (nano)materials for efficient Cr(VI) removal from the environment using adsorption/reduction, photocatalytic, and chemical reduction mechanisms.

Chromium contamination and effect on environmental health and its remediation: A sustainable approaches

Chromium (Cr) is a trace element critical to human health and well-being. In the last few decades, its contamination, especially hexavalent chromium [Cr(VI)] form in both terrestrial and aquatic ecosystems, has amplified as a result of various anthropogenic activities. Chromium pollution is a significant environmental threat, severely impacting our environment and natural resources, especially water and soil. Excessive exposure could lead to higher levels of accumulation in human and animal tissues, leading to toxic and detrimental health effects. Several studies have shown that chromium is a toxic element that negatively affects plant metabolic activities, hampering crop growth and yield and reducing vegetable and grain quality. Thus, it must be monitored in water, soil, and crop production system. Various useful and practical remediation technologies have been emerging in regulating chromium in water, soil, and other resources. A sustainable remediation approach must be adopted to balance the environment and nature.

Fungal chitin-glucan nanopapers with heavy metal adsorption properties for ultrafiltration of organic solvents and water

Membranes and filters are essential devices, both in the laboratory for separation of media, solvent recovery, organic solvent and water filtration purposes, and in industrial scale applications, such as the removal of industrial pollutants, e.g. heavy metal ions, from water. Due to their solvent stability, biologically sourced and renewable membrane or filter materials, such as cellulose or chitin, provide a low-cost, sustainable alternative to synthetic materials for organic solvent filtration and water treatment. Here, we investigated the potential of fungal chitin nanopapers derived from A. bisporus (common white-button mushrooms) as ultrafiltration membranes for organic solvents and aqueous solutions and hybrid chitin-cellulose microfibril papers as high permeance adsorptive filters. Fungal chitin constitutes a renewable, easily isolated, and abundant alternative to crustacean chitin. It can be fashioned into solvent stable nanopapers with pore sizes of 10-12 nm, as determined by molecular weight cut-off and rejection of gold nanoparticles, that exhibit high organic solvent permeance, making them a valuable material for organic solvent filtration applications. Addition of cellulose fibres to produce chitin-cellulose hybrid papers extended membrane functionality to water treatment applications, with considerable static and dynamic copper ion adsorption capacities and high permeances that outperformed other biologically derived membranes, while being simpler to produce, naturally porous, and not requiring crosslinking. The simple nanopaper production process coupled with the remarkable filtration properties of the papers for both organic solvent filtration and water treatment applications designates them an environmentally benign alternative to traditional membrane and filter materials.

Magnetic magnesium ferrite-doped multi-walled carbon nanotubes: an advanced treatment of chromium-containing wastewater

Magnetic magnesium ferrite (MgFe₂O₄) nanoparticles (MMFNPs) were synthesized by employing the sol-gel method. These nanoparticles were ultrasonically decorated onto the multi-walled carbon nanotubes (MWCNTs) to produce magnetic magnesium ferrite nanocomposites (MMFNCs). The as-prepared materials were investigated for their capability to treat wastewater loaded with heavy metals. The synthesized nanocomposites were characterized by field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transmission infrared spectroscopy, Raman spectroscopy, thermogravimetric analysis, and zeta analyzer. Besides, the effect of the environmental chemistry of the solution was determined by varying the critical parameters. The adsorption isotherm of Cr(VI) adsorption onto the as-synthesized MMFNC best fitted the Langmuir adsorption isotherm model. The high adsorption capacity of 175.43 mg/g was achieved at a temperature of 40 °C under optimized conditions. Due to the magnetic nature of MMFNC, they are easily recoverable from the aqueous solution making them cost-friendly. Even after seven consecutive adsorption-desorption cycles, the MMFNC presented an efficiency loss of less than 20% for the removal of Cr(VI) ions. The presented development method offers prospects in developing a highly effective magnetic adsorbent for heavy metal removal from wastewater.

Recent advances in hexavalent chromium removal from aqueous solutions by adsorptive methods

Chromium exists mainly in two forms in environmental matrices, namely, the hexavalent (Cr(vi)) and trivalent (Cr(iii)) chromium. While Cr(iii) is a micronutrient, Cr(vi) is a known carcinogen, and that warrants removal from environmental samples. Amongst the removal techniques reported in the literature, adsorption methods are viewed as superior to other methods because they use less chemicals; consequently, they are less toxic and easy to handle. Mitigation of chromium using adsorption methods has been achieved by exploiting the physical, chemical, and biological properties of Cr(vi) due to its dissolution tendencies in aqueous solutions. Many adsorbents, including synthetic polymers, activated carbons, biomass, graphene oxide, and nanoparticles as well as bioremediation, have been successfully applied in Cr(vi) remediation. Initially, adsorbents were used singly in their natural form, but recent literature shows that more composite materials are generated and applied. This review focused on the recent advances, insights, and project future directions for these adsorbents as well as compare and contrast the performances achieved by the mentioned adsorbents and their variants.

Performance of chitosan engraved iron and lanthanum mixed oxyhydroxide for the detoxification of hexavalent chromium

The iron - lanthanum mixed oxyhydroxide (FLMOH) and chitosan engraved iron - lanthanum mixed oxyhydroxide materials (CSFLMOH) were prepared successfully and utilized for the hexavalent chromium adsorption studies. The physicochemical properties of pristine and Cr(VI) treated adsorbents were characterized using XRD, FTIR, SEM with EDX, TGA and DSC analysis. The efficacy of the CSFLMOH was compared with FLMOH towards the uptake of Cr(VI) ions and was explored using batch technique under various influencing parameters viz., time, dose, pH, initial concentration and co-existing anions. Langmuir, Freundlich and Dubinin - Radushkevich isotherms were used to analyze the adsorption behavior at 303, 313 and 323 K. The rate of the reaction was calculated using reaction based and diffusion-based models. Recycle and reuse studies were demonstrated using 0.05 M NaOH as the desorbing medium.

Adsorption of Hexavalent Chromium by Eucalyptus camaldulensis bark/maghemite Nano Composite

In the present study, Eucalyptus camaldulensis bark/maghemite composite (ECMC) was used for potential application as a low-cost adsorbent for the removal of Cr(VI) from aqueous solution. The structural characterization, morphology and elemental analysis of ECMC were performed by Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray (EDX) and X-ray Diffraction (XRD). The effects of various independent parameters, contact time, initial Cr(VI) concentration, temperature, pH, and adsorption were investigated. It was found that the adsorption capacity of ECMC increases with increasing Cr(VI) concentration and temperature. The optimum pH was found to be 2 for the removal of Cr(VI) by ECMC. The adsorption capacity was found to be 70.1 mg/g with 0.1 g ECMC at pH 2 and 30 °C. Additionally, 10 and 50 mg/L Cr(VI) were removed from 100 mL aqueous solution by 0.1 g ECMC with 99 % and 93.46 % removal efficiencies, respectively. Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Jovanovic, Smith, Koble Korringen, Vieth-Sladek and Sips Isotherm Models were applied to the experimental data to understand the adsorption mechanism better. The Freundlich Isotherm Model described the adsorption process better (R2 = 0.991) among the other isotherms studied.

Kinetics, isotherm, and optimization of the hexavalent chromium removal from aqueous solution by a magnetic nanobiosorbent

Sorption is the most effective approach to the treatment of acid mine drainage (AMD) and wastewaters, but the removal of the adsorbents from water has always been a challenging problem which may be resolved by using magnetic separation. In this work, a magnetic bioadsorbent was prepared using low cost and high-performance sources and applied in Cr(VI) removal from a synthetic solution. Initially, magnetite nanoparticles were synthesized from iron boring scraps by chemical co-precipitation method. Results of dynamic light scattering (DLS) and vibrating sample magnetometry (VSM) analyses showed that the synthesized nanoparticles were around 40 nm in size and had a significant magnetization. Then, the magnetite nanoparticles were attached to the dead and alkaline activated biomass of Aspergillus niger. Central composite design (CCD) was applied to determine the optimal condition of Cr(VI) adsorption on the produced magnetic nanobiocomposite. The maximum chromium removal (~ 92%) was achieved at pH 5.8, Cr concentration 23.4 mg/l, adsorbent dose 3.72 g/l, agitation rate 300 rpm, and duration 11 min. Kinetic studies showed that regardless of temperature, the process was controlled by mass transfer and intraparticle diffusion with an equilibrium constant of 0.74 mg/g min^1/2 at 40 °C. Also, the adsorption isotherms followed the Temkin model, which indicated the physical adsorption of Cr(VI) on the produced sorbent. Therefore, the magnetic nanobiocomposite has a perfect ability to be used as the chromium adsorbent and can be collected by a low external magnetic field. Graphical abstract Synthesis of the magnetic nanobiosorbent and its application in the removal of Cr(VI) from wastewaters.

From the iron boring scraps to superparamagnetic nanoparticles through an aerobic biological route

A straightforward, highly efficient, and low-cost biological route was introduced for the synthesis of magnetic nanoparticles. Three urease-positive bacteria namely, Bacillus subtilis, B. pasteurii, and B. licheniformis were used to biosynthesize ammonia and biosurfactants required for the nanoparticle production. Also, the features of the applied biological approach was compared with a chemical co-precipitation method. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), vibrating-sample magnetometer (VSM), and Fourier transform infrared spectroscopy (FTIR) were applied to characterize the synthesized nanoparticles. Results indicated that the biologically fabricated powders had a single domain structure, and their mean particle size was in the range of 37 to 97 nm. The production capacity of the biological processes was double the chemical method, and the biosynthesized superparamagnetic nanoparticles had higher saturation magnetization up to 132 emu/g. Finally, the removal of Cr(VI) from a synthetic solution was investigated using the four products. The maximum elimination of chromium (over 99%) was achieved by the particles synthesized by B. pasteurii, with the adsorption capacity of 190 mg/g.

Hydrothermal synthesis of hydrocalumite assisted biopolymeric hybrid composites for efficient Cr(vi) removal from water

Hydrocalumite (HC) incorporated biopolymer (alginate and chitosan) based hybrid composite materials were developed for the selective removal of chromium.