Adsorption of catecholamines from their aqueous solutions on hypercrosslinked polystyrene

Rapid multi-residue LC-MS/MS determination of nitrofuran metabolites, nitroimidazoles, amphenicols, and quinolones in honey with ultrasonic-assisted derivatization - magnetic solid-phase extraction

A rapid multi-residue LC-MS/MS method for the identification and determination of banned veterinary drugs in honey was developed. A total of 31 investigated veterinary drugs belonging to 4 classes including nitrofurans metabolites, nitroimidazoles, amphenicols, and quinolones were quantified by LC-MS/MS with ESI using one single injection. The sample preparation included treatment with 5-nitro-2-furaldehyde (5-NFA) in a thermostated ultrasonic bath (80 °C, 0.5М НСl, 20 min) to liberate matrix-bound residues of nitrofurans. Magnetic hypercrosslinked polystyrene (HCP/Fe3O4) was proposed for the solid-phase extraction and clean-up of target analytes prior to LC-MS/MS analysis. To evaluate and validate the performance of method, the criteria of the Decision (EC) no 2002/657 were applied. The LOQs of the examined analytes range from 0.3 to 1 μg kg-1, which indicates good sensitivity to quantify the target compounds in honey. The recoveries of veterinary drugs from 1 g of honey with 50 mg of the sorbent are 97-109% for nitrofuran metabolites, 84-115% for nitroimidazoles, 86-103% for amphenicols, and 97-118% for quinolones. The relative standard deviations of intra-day and inter-day precision analyses (RSD) are less than 16%. This methodology was applied to real honey samples and trace levels of some veterinary drugs were detected.

An Overview of Heterogeneous Catalysts Based on Hypercrosslinked Polystyrene for the Synthesis and Transformation of Platform Chemicals Derived from Biomass

Platform chemicals, also known as chemical building blocks, are substances that serve as starting materials for the synthesis of various value-added products, which find a wide range of applications. These chemicals are the key ingredients for many fine and specialty chemicals. Most of the transformations of platform chemicals are catalytic processes, which should meet the requirements of sustainable chemistry: to be not toxic for humans, to be safe for the environment, and to allow multiple reuses of catalytic materials. This paper presents an overview of a new class of heterogeneous catalysts based on nanoparticles of catalytically active metals stabilized by a polymer matrix of hypercrosslinked polystyrene (HPS). This polymeric support is characterized by hierarchical porosity (including meso- and macropores along with micropores), which is important both for the formation of metal nanoparticles and for efficient mass transfer of reactants. The influence of key parameters such as the morphology of nanoparticles (bimetallic versus monometallic) and the presence of functional groups in the polymer matrix on the catalytic properties is considered. Emphasis is placed on the use of this class of heterogeneous catalysts for the conversion of plant polysaccharides into polyols (sorbitol, mannitol, and glycols), hydrogenation of levulinic acid, furfural, oxidation of disaccharides, and some other reactions that might be useful for large-scale industrial processes that aim to be sustainable. Some challenges related to the use of HPS-based catalysts are addressed and multiple perspectives are discussed.

Multi-class, multi-residue determination of 132 veterinary drugs in milk by magnetic solid-phase extraction based on magnetic hypercrosslinked polystyrene prior to their determination by high-performance liquid chromatography-tandem mass spectrometry

A quantitative multi-class multi-residue analytical method was developed for the determination of veterinary drugs in milk by high-performance liquid chromatography - tandem mass spectrometry (HPLC-MS/MS). A total of 132 veterinary drugs investigated belonged to almost 15 classes including sulfonamides, β-lactams, tetracyclines, quinolones, macrolides, nitrofurans, nitroimidazoles, phenicols, lincosamides, pleuromutilins, macrocyclic lactones, quinoxaline antibiotics, benzimidazoles, anthelmintics, coccidiostats and some others. A magnetic solid-phase extraction procedure was developed using magnetic hypercrosslinked polystyrene (HCP/Fe₃O₄) for the sample preparation prior to HPLC-MS/MS without deproteinization step. The results indicated recoveries of 85-107% for 14 sulfonamides, 85-120% for 13 β-lactams, 89-115% for 4 tetracyclines, 82-119% for 14 quinolones, 82-115% for 8 macrolides, 97-109% for 4 nitrofurans, 84-115% for 10 nitroimidazoles, 89-114% for 3 phenicols, 86-111% for 3 lincosamides, 97-102% for 2 pleuromutilins, 72-88% for 4 macrocyclic lactones, 87-104% for 4 quinoxaline antibiotics, 76-119% for 21 benzimidazoles, 79-115% for 12 anthelmintics, 81-118% for 12 coccidiostats and 75-119 % for 5 unclassified drugs, with relative standard deviations (RSDs) of less than 20%, and the LOQs ranged from 0.05 to 1 μg kg^-1. This methodology was then applied to field-collected real milk samples and trace levels of some veterinary drugs were detected.

Synthesis of phosphorylated hyper-cross-linked polymers and their efficient uranium adsorption in water

Uranium (U) is hazardous and radioactive, wastewater containing U(VI) should be treated before being discharged. Here, two novel uranium adsorbents, phosphorylated hyper-cross-linked bisphenol A (PHCP-1) and fluorene-9-bisphenol (PHCP-2) were separately synthesized via Friedel-Crafts reaction followed by phosphorylation using phosphorus oxychloride. PHCPs had a BET surface area (up to 564 m²/g) with pore sizes of 2.2-2.8 nm. These adsorbents were used for the first time for uranium adsorption from water and demonstrated outstanding adsorption performance. PHCP-2 had a great uranium adsorption capacity (297.14 mg/g) and a very fast sorption rate (85% removal rate within 5 min). The adsorption data were well fitted with Freundlich isotherm and the pseudo-second-order kinetic model. PHCPs displayed selective adsorption capacity for U(VI) from solution that including a variety of competing metal ions. The reusability was confirmed through three regeneration cycles. Based on a series of spectroscopic analyses, the mechanism of action between PHCPs and U(VI) is primarily derived from the complex between phosphate functional groups and U (VI). The sorption performance of PHCPs is attributed to their huge specific surface area and the strong complex between phosphate groups and U(VI). These findings suggest that PHCPs could be useful in the effective adsorption of uranium from water.

Sodium Lignosulfonate Modified Polystyrene for the Removal of Phenol from Wastewater

An eco-friendly and novel water treatment material was synthesized using sodium lignosulfonate modified polystyrene (SLPS), which can be used to eliminate phenols in aqueous solution. SLPS was characterized by BET, FTIR, SEM, and EDS. The effect of the initial pH value, phenol content, adsorption time, and temperature on the absorbability of phenol in SLPS was investigated through adsorption experiments. It was found that SLPS could efficiently adsorb phenol in aqueous solution at a pH value of about 7. The test results revealed that the kinetic adsorption and isotherm adsorption could be successfully described using the pseudo second-order and Langmuir models, respectively. It was illustrated that the phenol adsorption on SLPS was dominated by chemisorption and belonged to monolayer adsorption. The max. phenol adsorption value of SLPS was 31.08 mg/g at 30 °C. Therefore, SLPS displayed a great potential for eliminating phenol from polluted water as a kind of novel and effective adsorbent.