Antifungal properties of poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) and quaternized derivatives

Surface modification of cellulose nanocrystals for biomedical and personal hygiene applications

The increasing demand for sustainable and effective materials in biomedical and personal hygiene applications has driven the exploration of cellulose nanocrystals (CNCs) derived from biomass. These nanomaterials are highly valued for their exceptional mechanical properties, biocompatibility, and renewable nature. Researchers are exploring CNCs for advancing medical and hygiene products, but surface modification is often needed to maximize their benefits. Techniques such as chemical functionalization, physical coating, and hybridization can significantly enhance CNCs dispersibility, stability, and interaction with biological systems. This versatility makes CNCs suitable for a variety of applications, including drug delivery systems, wound dressings, and personal hygiene products. Despite their advantages, maintaining the inherent properties of CNCs while integrating new functionalities through modification poses a challenge. Understanding the impact of various modification techniques on CNC performance is crucial for optimizing their effectiveness. This review aimed to consolidate current knowledge on the surface modification of biomass-derived CNCs, offering insights into different methods and their implications for biomedical and personal hygiene applications. By highlighting advancements, challenges, and prospects, it served as a crucial resource for advancing the development and application of CNCs in these critical fields.

Dual-Responsive PIL Films with Gold Nanoparticles: Tailoring Electrical Responses to pH and Thermal Stimuli

In recent years, stimuli-responsive poly(ionic liquids) (PILs) have attracted great attention. The stimuli-dependent properties, particularly the electrical properties, of multiresponsive PILs incorporating functionalized nanoparticles, however, have been less investigated. In this work, we present the synthesis, characterization, and application of PIL films incorporating pH- and thermoresponsive hybrid materials composed of gold nanoparticles functionalized with poly(2-(dimethylamino)ethyl methacrylate) (Au@PDMAEMA). The Au@PDMAEMA nanoparticles exhibit distinct responsiveness to changes in environmental pH and temperature, thereby altering the electrical properties of the PIL films blended with responsive gold nanoparticles (PIL w/Au). This research not only fills a gap in the study of electrical properties of multiresponsive nanoparticle-incorporated PILs but also extends the potential applications of PILs in various fields, including smart sensors and electronic devices.

Bactericidal and Antifouling Coatings with the "Killing-Repelling-Killing" Triple Function Based on Cationic Copolymers with Structure Conversion and Capsaicin Analogue Release

The capsaicin analogue N-(4-hydroxy-3-methoxybenzyl) acrylamide (HMBA) was linked with polylauryl methacrylate-b-poly(2-(N,N-dimethylamino)ethyl methacrylate) (PLMA-b-PDMAEMA) via a quaternization reaction with 4-(acrylamidomethyl)-2-methoxyphenyl 2-chloroacetate (AAMPCA). The amphiphilic copolymers were capable of transforming its structure in response to the solvent change from aprotic to protic, which was verified by the 1H NMR spectrum. The resulting cationic copolymers underwent a hydrolysis process in water, yielding zwitterionic groups on surfaces. Meanwhile, the bactericidal reagent HMBA was released. It was proved that the hydrolysis rate of the copolymers accelerated with higher temperature, higher pH value, and higher hydrophilic block units. And the controllable, sustainable release of HMBA was achieved with copolymer-mediated hydrolysis. Protein-repellent and bactericidal tests on the surface of the coating proved that antifouling and bactericidal performances of the coating correlated to the structure conversion abilities of the corresponding copolymer. The dynamic monitoring of Escherichia coli adhesion in 3 h evidenced the antifouling and bactericidal process of copolymers with different block ratios and concentrations. The coating incorporated with 3% PLMA120-b-(PDMAEMA-AAMPCA)120 in polylactic acid base materials showed an adhesion ratio of E. coli less than 1% within 1 h, and the survival ratio of the adhered bacteria is <1%, suggesting its rapid speed and high efficiency in "bacterial repelling and killing". Also, the PLMA120-b-(PDMAEMA-AAMPCA)120 copolymer demonstrated enhanced bactericidal ability compared with the mixture of cationic poly(laruyl methacrylate)120-b-poly(carboxybetaine methacrylate ester)120 (PLMA120-b-PCBMAE120) and free HMBA. The lowest minimal inhibitory concentration was 0.078 mg/mL against Staphylococcus aureus and 0.312 mg/mL against E. coli, respectively.

Unlocking the Potential: PEGylation and Molecular Weight Reduction of Ionenes for Enhanced Antifungal Activity and Biocompatibility

Numerous synthetic polymers, imitating natural antimicrobial peptides, have demonstrated potent antimicrobial activity, positioning them as potential candidates for new antimicrobial drugs. However, the high activity of these molecules often comes at the cost of elevated toxicity against eukaryotic organisms. In this study, a series of cationic ionenes with varying molecular weights to assess the influence of polymer chain length on ionene activity is investigated. To enhance polymer antimicrobial activity and limit toxicity a PEG side chain is introduced into the repeating unit. The resulting molecules consistently exhibited high activity against three model organisms: E. coli, S. aureus and C. albicans. The incorporation of side PEG chain improves antifungal properties and biocompatibility, regardless of molecular weight. The most important finding of this work is that the reduction of polymer molecular mass led to increased antifungal activity and reduced cytotoxicity against HMF and MRC-5 cell lines simultaneously. As a result, the best-performing molecules reported herein displayed minimal inhibitory concentrations (MIC) as low as 2 and 0.0625 µg mL1 for C. albicans and C. tropicalis respectively, demonstrating exceptional selectivity. It is plausible that some of described herein molecules can serve as potential lead candidates for new antifungal drugs.

Biophysical investigation of liposome systems decorated with bioconjugated copolymers in the presence of amantadine

Liposome-based technologies derived from lipids and polymers (e.g., PEGylated liposomes) have been recognized because of their applications in nanomedicine. However, since such systems represent myriad challenges and may promote immune responses, investigation of new biomaterials is mandatory. Here, we report on a biophysical investigation of liposomes decorated with bioconjugated copolymers in the presence (or absence) of amantadine (an antiviral medication). First, copolymers of poly(N,N-dimethylacrylamide-co-fluoresceinacrylate-co-acrylic acid-N-succinimide ester)-block-poly(N-isopropylacrylamide) (PDMA-b-PNIPAM) containing a fluorescence label were biofunctionalized with short peptides that resemble the sequence of the loops 220 and 130 of the binding receptor of the hemagglutinin (HA) protein of the influenza A virus. Then, the bioconjugated copolymers were self-assembled along with liposomes composed of 1,2 dimyristoyl-sn-glycero-3-phosphocholine, sphingomyelin, and cholesterol (MSC). These biohybrid systems, with and without amantadine, were systematically characterized using differential scanning calorimetry (DSC), dynamic light scattering (DLS), and cryogenic transmission electron microscopy (cryoTEM). Finally, the systems were tested in an in vitro study to evaluate cytotoxicity and direct immunofluorescence in Madin Darbin Canine Kidney (MDCK) cells. The biohybrid systems displayed long-term stability, thermo-responsiveness, hydrophilic-hydrophobic features, and fluorescence properties and were presumable endowed with cell targeting properties intrinsically integrated into the amino acid sequences of the utilized peptides, which indeed turn them into promising nanodevices for biomedical applications.

Size-Controlled Ammonium-Based Homopolymers as Broad-Spectrum Antibacterials

Ammonium group containing polymers possess inherent antimicrobial properties, effectively eliminating or preventing infections caused by harmful microorganisms. Here, homopolymers based on monomers containing ammonium groups were synthesized via Reversible Addition Fragmentation Chain Transfer Polymerization (RAFT) and evaluated as potential antibacterial agents. The antimicrobial activity was evaluated against Gram-positive (M. luteus and B. subtilis) and Gram-negative bacteria (E. coli and S. typhimurium). Three polymers, poly(diallyl dimethyl ammonium chloride), poly([2-(methacryloyloxy)ethyl]trimethylammonium chloride), and poly(vinyl benzyl trimethylammonium chloride), were examined to explore the effect of molecular weight (10 kDa, 20 kDa, and 40 kDa) on their antimicrobial activity and toxicity to mammalian cells. The mechanisms of action of the polymers were investigated with dye-based assays, while Scanning Electron Microscopy (SEM) showed collapsed and fused bacterial morphologies due to the interactions between the polymers and components of the bacterial cell envelope, with some polymers proving to be bactericidal and others bacteriostatic, while being non-hemolytic. Among all the homopolymers, the most active, non-Gram-specific polymer was poly([2-(methacryloyloxy)ethyl]trimethylammonium chloride), with a molecular weight of 40 kDa, with minimum inhibitory concentrations between 16 and 64 µg/mL, showing a bactericidal mode of action mediated by disruption of the cytoplasmic membrane. This homopolymer could be useful in biomedical applications such as surface dressings and in areas such as eye infections.

Polymers showing intrinsic antimicrobial activity

Pathogenic microorganisms are considered to a major threat to human health, impinging on multiple sectors including hospitals, dentistry, food storage and packaging, and water contamination. Due to the increasing levels of antimicrobial resistance shown by pathogens, often caused by long-term abuse or overuse of traditional antimicrobial drugs, new approaches and solutions are necessary. In this area, antimicrobial polymers are a viable solution to combat a variety of pathogens in a number of contexts. Indeed, polymers with intrinsic antimicrobial activities have long been an intriguing research area, in part, due to their widespread natural abundance in materials such as chitin, chitosan, carrageen, pectin, and the fact that they can be tethered to surfaces without losing their antimicrobial activities. In addition, since the discovery of the strong antimicrobial activity of some synthetic polymers, much work has focused on revealing the most effective structural elements that give rise to optimal antimicrobial properties. This has often been synthesis targeted, with the generation of either new polymers or the modification of natural antimicrobial polymers with the addition of antimicrobial enhancing modalities such as quaternary ammonium or guanidinium groups. In this review, the growing number of polymers showing intrinsic antimicrobial properties from the past decade are highlighted in terms of synthesis; often based on post-synthesis modification and their utilization. This includes as surface coatings, for example on medical devices, such as intravascular catheters, orthopaedic implants and contact lenses, or directly as antibacterial agents (specifically as eye drops). Surface functionalisation with inherently antimicrobial polymers is highlighted and has been achieved via various techniques, including surface-bound initiators allowing RAFT or ATRP surface-based polymerization, or via physical immobilization such as by layer-by-layer techniques. This article also covers the mechanistic modes of action of intrinsic antimicrobial polymers against bacteria, viruses, or fungi.