Effects of Siemens TT-D carbon fiber table top on beam attenuation, and build up region of 6 MV photon beam

A Study to Analyze Impact of Treatment Couch and Immobilization Devices on Surface Dose for Megavoltage Photon Beams

PURPOSE/OBJECTIVE

The purpose of this study is to investigate the effect of treatment couch and immobilization devices on surface dose for megavoltage photon beams.

MATERIAL/METHODS

Percentage surface dose (PSD) measurement was carried out in Elekta Synergy™ Linear accelerator using PTW Markus® Parallel plate ionization chamber of volume 0.05cm3 with water equivalent RW3 Slab phantom (PTW, Germany). The measurement depth was considered at 0.07mm. The reference PSD was measured at 0° gantry angle with 10×10cm2, 20×20cm2 and 30×30cm2 field sizes and 100cm SSD for 4MV, 6MV and 15MV photon beams. For comparison, PSD measurement was carried out at 180° gantry angle inclusion of treatment couch (TC), All in One positioning system (AIO - PS) and Vac lok Cushions (VLC).

RESULTS

Beam angle at 0°, for field sizes 10×10cm2, 20×20cm2 and 30×30cm2, the PSD was observed as 30.9%, 40.5%, 48.7% for 4MV; 23.7%, 33.8%, 42.2% for 6MV; and 17.0%, 29.6%, 38.6% for 15MV respectively. Beam angle at 180° with TC, an increase in PSD by maximum of 65.0% for 4MV, 64.9% for 6MV and 55.9% for 15MV as compared to 0° angle. The PSD increased when beam angle was 180° with TC and AIO - PS were 65.0% for 4MV, 67.4% for 6MV, and 60.9% for 15MV than 0° angle. Similarly, increased PSD for beam angle at 180° with TC and VLC were 66.8% for 4MV, 66.8% for 6MV and 61.3% for 15MV as compared to 0° angle.

CONCLUSION

For all three-photon energies, at 180° gantry angle, the PSD increased significantly in case of TC, VLC, and AIO - PS for all the field sizes as compared to gantry angle at 0°. It is necessary to consider TC, AIO - PS and VLC during dose calculation to ensure accuracy of patient treatment delivery.

Effect of linear accelerator carbon fiber couch on radiotherapy dose

This study aimed to explore the effect of carbon fiber couch on radiotherapy dose attenuation and gamma pass rate in intensity-modulated radiotherapy (IMRT) plans. A phantom inserted with an ionization chamber was placed at different positions of the couch, and the dose was measured by the chamber. Under the same positioning, the phantom dose was calculated using the real and virtual couch images, and the difference in the planned dose of radiotherapy was compared. Ten clinical IMRT plans were selected as dose verification data, and the gamma pass rates were compared between couch addition and non-addition conditions. When the radiation field was near 110° and 250°, the measured value attenuation coefficient of the ionization chamber at the joint of the couch was up to 34%; the attenuation coefficient of the treatment couch from the actual couch image calculated using the treatment planning system (TPS) was up to 33%; the attenuation coefficient of the virtual couch calculated using the TPS was up to 4.0%. The gamma pass rate of the dose verification near gantry angles 110° and 250° was low, and that of the joint could be lower than 85% under the condition of 3%/3 mm. The gamma pass rates of the radiation field passing through the couch were all affected. The dose was affected by the radiation field passing through the couch, with the largest effect when passing through the joint part of the treatment couch, followed by that of the main couch plate and extension plate. When the irradiation field passed through the joint and near 110° and 250° of the main couch, the dose difference was large, making it unsuitable for treatment.

Dosimetric effect of modelling non-homogeneous LINAC couch using cone-beam computed tomography on quality assurance (QA) results

Aim:

To evaluate the dosimetric effect of modelling a non-homogeneous couch on patients’ quality assurance (QA) gamma pass rates for intensity-modulated radiotherapy (IMRT) and volumetric modulated arc therapy (VMAT) techniques.

Materials and Methods:

A non-homogeneous treatment couch (TxT 550 TTM, CIVCO, USA) was imaged using the LINAC mounted cone-beam computer tomography (CBCT) system. Modelling this couch in different situations, including incomplete (homogeneous model), correct model and not defined situations in the treatment planning system (TPS), was performed based on the geometrical and material densities data extracted from the CBCT images. Calculated gamma pass rates between TPS dose calculations and the measurements in a phantom for different couch models were obtained and compared at two gamma criteria (2%-2 mm and 3%-3 mm).

Results:

Comparing TPS calculations for the correct modelled couch and the measurements showed high gamma pass rates for both the IMRT and VMAT techniques (96·5 ±  0·9%, 99·2 ±  0·5% for IMRT in 2%-2 mm and 3%-3 mm criteria; 97·5 ±  0·8%, 99·4 ±  0·5% for VMAT). The overall gamma pass rate of the IMRT plan QAs was reduced by about 2% and 3% on average for incomplete and no couch modelling, respectively. These reductions for VMAT techniques were 2·5% and 4·3%, respectively.

Conclusions:

Non-homogeneous couches have different parts with different attenuations, which can be correctly defined using LINAC CBCT. Modelling of treatment couch has a significant effect on patient QA results for VMAT and IMRT plans, especially in radiation fields/subfield transmitting from the couch. We suggest using LINAC CBCTs as an appropriate device for couch modelling in modulated radiotherapy techniques.

Radiation dosimetry effect evaluation of a carbon fiber couch on novel uRT-linac 506c accelerator

Recently, a diagnostic helical CT is integrated into a linear accelerator, called uRT-linac 506c, whose CT scanning dataset can be directly used to do simulation. This novel structure provides a possibility for online adaptive radiotherapy. For adaptive radiotherapy, the carbon fiber couch is an essential external device for supporting and positioning patients. And the effect on dose attenuation and distribution caused by a couch is inevitable and vital for precise treatment. In this research, the couch equipped with uRT-linac 506c was evaluated on the radiation dosimetry effect. The treatment couch equipped on the uRT-linac 506c accelerator was evaluated, and its effect on the attenuation, surface dose and dose buildup were measured for different phantom positions (offset = 0 cm, offset =  + 10 cm and offset =  − 10 cm, respectively) and different gantry angles. Since uRT-linac 506c is exclusively capable to provide diagnostic CT scanning data with real relative electron density (RED), this CT scanning data of the couch can be used directly in uRT-TPS to design plans. This scanned couch dataset was designated as the model A. The model B was a dummy structure of a treatment couch inserted with artificially preset RED. The dose calculation accuracy of these two models was compared using PB, CC, and MC on uRT-TPS. With the effect of carbon fiber couch, the surface dose was increased at least 97.94% for 25 × 25 cm² field and 188.83% for 10 × 10 cm² field, compared with those without. At different phantom positions (offset = 0, + 10, − 10 cm), the attenuation for 6 MV photon beam at gantry angle 180° were 4.4%, 4.4%, and 4.3%, respectively, and varied with changes of gantry angle. There do exists dose deviation between measurement and TPS calculation with the involvement of treatment couch, among the three algorithms, MC presented the least deviation, and the model A made less and steadier deviation than the model B, showing promising superiority. The attenuation, surface dose, and buildup effects of the carbon fiber couch in this study were measured similarly to most counterparts. The dose deviation calculated based on the couch dataset scanned by the diagnostic helical CT was smaller than those based on a dummy couch. This result suggests that an accelerator equipped with a diagnostic CT, which can help reduce the dose deviation of the carbon fiber couch, is a promising platform for online adaptive radiotherapy.

Dosimetric effects of supine immobilization devices on the skin in intensity-modulated radiation therapy for breast cancer: a retrospective study

Background

The dose perturbation effect of immobilization devices is often overlooked in intensity-modulated radiation therapy (IMRT) for breast cancer (BC). This retrospective study assessed the dosimetric effects of supine immobilization devices on the skin using a commercial treatment planning system.

Methods

Forty women with BC were divided into four groups according to the type of primary surgery: groups A and B included patients with left and right BC, respectively, who received 50 Gy radiotherapy in 25 fractions after radical mastectomy, while groups C and D included patients with left and right BC, respectively, who received breast-conservation surgery (BCS) and 40.05 Gy in 15 fractions as well as a tumor bed simultaneous integrated boost to 45 Gy. A 0.2-cm thick skin contour and two sets of body contours were outlined for each patient. Dose calculations were conducted for the two sets of contours using the same plan. The dose differences were assessed by comparing the dose-volume histogram parameter results and by plan subtraction.

Results

The supine immobilization devices for BC resulted in significantly increased skin doses, which may ultimately lead to skin toxicity. The mean dose increased by approximately 0.5 and 0.45 Gy in groups A and B after radical mastectomy and by 2.7 and 3.25 Gy in groups C and D after BCS; in groups A–D, the percentages of total normal skin volume receiving equal to or greater than 5 Gy (V₅) increased by 0.54, 1.15, 2.67, and 1.94%, respectively, while the V₁₀ increased by 1.27, 1.83, 1.36, and 2.88%; the V₂₀ by 0.85, 1.87, 2.76, and 4.86%; the V₃₀ by 1.3, 1.24, 10.58, and 11.91%; and the V₄₀ by 1.29, 0.65, 10, and 10.51%. The dose encompassing the planning target volume and other organs at risk, showed little distinction between IMRT plans without and with consideration of immobilization devices.

Conclusions

The supine immobilization devices significantly increased the dose to the skin, especially for patients with BCS. Thus, immobilization devices should be included in the external contour to account for dose attenuation and skin dose increment.

Trial registration

This study does not report on interventions in human health care.