Performance of the eclipse monitor unit objective tool utilizing volumetric modulated arc therapy for rectal cancer

A measurement validation of improved plan deliverability with monitor unit objective tool for spine stereotactic ablative radiotherapy

Spine stereotactic body radiation therapy (SBRT) uses high dose per fraction for palliative pain control. The treatment plans are often heavily modulated due to close proximity to spinal cord and this can lead to poor plan quality which are susceptible to dose delivery discrepancy. Therefore, we aim to assess the effectiveness of the monitor unit (MU) objective tool in Eclipse treatment planning systems in modulating the plan complexity to improve the plan quality in spine SBRT. Seven retrospective spine SBRT plans are re-optimized using the MU objective tool in Eclipse TPS v13.6 and were compared with the original plans. The dose metrics of the tumor PTV were compared using D_1cc. D_99%, D_95%, D_0.03cc, D_0.1cc, D_0.35cc and D_1cc, and that of cord PRV were compared using D_0.03cc, D_0.1cc, D_0.35cc. Four different plan complexities were also calculated for the original and re-optimized plans to quantify the impact of the tool on the modulation. Patient specific quality assurance measurements were performed with Stereophan and SRS MapCheck, and analyzed using the 1%/1-mm and 2%/2-mm criteria with gamma analysis. The dose metrics of the PTV and cord PRV of the re-optimized and original plans are similar and still meet the planning dose constraints. In particular, the PTV dose coverage has a small percentage difference of (0.15 ± 1.33)% and (0.01 ± 1.04)% for D_99% and D_95%, respectively. The 4 calculated plan complexity metrics consistently show that the re-optimized plans are quantitatively less complex than the original plan. The gamma passing rate of the re-optimized plans improved from (92.2 ± 2.0)% to (94.2 ± 1.6)% with the 1%/1-mm criterion, and (98.7 ± 1.0)% to (99.5 ± 0.3)% with the 2%/2-mm criterion. Overall, the re-optimized plans achieve at least a 10% MU reduction (11.7% to 24.6%). Our study shows that optimization with the MU objective tool can reduce plan complexity and improves dose delivery accuracy, while not compromising the dose distribution.

Limiting treatment plan complexity by applying a novel commercial tool

PURPOSE

A recently introduced commercial tool is tested to assess whether it is able to reduce the complexity of a treatment plan and improve deliverability without compromising overall quality.

METHODS

Ten prostate and ten oropharynx plans of previously treated patients were reoptimized using the aperture shape controller (ASC) tool recently introduced in Eclipse TPS (Varian Medical Systems, Palo Alto, CA). The performance of ASC was assessed in terms of the overall plan quality using a plan quality metric, the reduction in plan complexity through the analysis of 14 of the most common plan complexity metrics, and the change in plan deliverability through 3D dosimetric measurements. Similarly, plans optimized limiting the total number of delivered monitor units was assessed and compared. The two strategies were also combined to assess their potential combination.

RESULTS

The plans optimized by exploiting the ASC generally show a reduced number of total Monitor Units, a more constant gantry rotation and a MLC modulation characterized by larger and less complicated shapes with leaves traveling shorter overall lengths.

CONCLUSIONS

This first experience suggests that the ASC is an effective tool to reduce the unnecessary complexity of a plan. This turns into an increased plan deliverability with no loss of plan quality.

Evaluation of three VMAT-TMI planning methods to find an appropriate balance between plan complexity and the resulting dose distribution

PURPOSE

Evaluation of different planning methods of treatment plan preparation for volumetric modulated arc therapy during total marrow irradiation (VMAT-TMI).

METHOD

Three different planning methods were evaluated to establish the most appropriate VMAT-TMI technique, based on organ at risk (OAR) dose reduction, conformity and plan simplicity. The methods were: (M1) the sub-plan method, (M2) use of eight arcs optimised simultaneously and (M3) M2 with monitor unit reduction. Friedman ANOVA comparison, with Nemenyi's procedures, was used in the statistical analysis of the results.

RESULTS

The dosimetric results obtained for the planning target volume and for most OARs do not differ statistically between methods. The M3 method was characterized by the lowest numbers of monitor units (3259 MU vs. 4450 MU for M1 and 4216 MU for M2) and, in general, the lowest complexity. The variability of the monitor units from control points was almost half for M3 than M1 and M2 (i.e. 0.33 MU vs. 0.61 MU for M1 and 0.58 for M2). Analysing the relationship between the dose distributions obtained for the plans and their complexity, the best result was observed for the M3 method.

CONCLUSION

The use of eight simultaneously optimised arcs with MU reduction allows to obtain VMAT-TMI plans that are characterized by the lowest complexity, with dose distributions comparable to the plans generated by other methods.