Structural, EPR, optical and magnetic properties of α-Fe₂O₃ nanoparticles

Effects on structure by spectroscopic investigations, valence state and morphology properties of FeCo-containing SnO2 catalysts for glycerol valorization to cyclic acetals

The effects on the structure, valence state and morphological properties of FeCo-containing SnO2 nanostructured solids were investigated. The physicochemical features were tuned by distinct synthesis routes e.g., sol-gel, coprecipitation and nanocasting, to apply them as catalysts in the glycerol valorization to cyclic acetals. Based on Mössbauer and XPS spectroscopy results, all nanosized FeCoSn solids have Fe-based phases, which contain Co and Sn included in the structure, and well-dispersed Fe3+ and Fe2+ surface active sites. Raman, FTIR and EPR spectroscopies measurements of the spent solids demonstrated structural stability for the sol-gel based solid, which is indeed responsible for the highest catalytic performance, among the nanocasted and coprecipitated counterparts. Morphological and elemental analyses illustrated distinct morphologies and composition on solid surface, depending on the synthesis route. The Fe/Co and Fe/Sn surface ratios are closely related to the catalytic performance. The improved glycerol conversion and selectivities of the solid obtained by sol-gel method was ascribed to the leaching resistance and the Sn action as a structural promoter.

Sol-gel synthesis and cytotoxicity evaluation of selenium-doped cerium oxide nanoparticles for biomedical applications

Over the past few years, ovarian cancer is the second most commonly diagnosed cancer among women. Despite the widespread knowledge of its prevalence, the curative measures and survival rates for ovarian cancer have not improved significantly, making it a challenging condition. Nanotechnology has become increasingly prominent in the field of cancer treatment. Previous studies showed both cerium oxide nanoparticles (CONPs) and selenium (Se) had anti-cancer. Therefore, doping selenium into CONPs may exhibit a more significant anti-cancer effect on ovarian cancer cells. Cerium nitrate hexahydrate, sodium selenite, and gelatin were employed for the production of CONPs and Se-doped CONPs. The EDX, XRD, and TEM/PSA imaging were employed to investigate the structural characteristics and morphology of the synthesized Se-doped CONPs. The reactive oxygen species (ROS) level and TNF, IL-6, and IL-1B gene expression were evaluated after inoculating A2780 human epithelial ovarian carcinoma (HEOC) with Se-doped CONP. Statistical analysis was conducted using ANOVA, followed by Bonferroni's t-test for multiple group comparisons. Se-doped CONPs had IC50 of 113 and 49 PPM after 24 and 48 h, respectively. In addition, Se-doped CONPs with concentrations of 50 and 100 PPM significantly reduced to ROS levels in the HEOC cell line. Also, 50 and 100 PPM Se-doped CONPs lead to significantly reduced TNF, IL-6, and IL-1B gene expression compared to the control group in the HEOC cell line. Our study showed the potential anti-cancer effects of Se-doped CONPs on ovarian cancer cell lines.

Selective Catalytic Reduction of NOx by CO over Cu(Fe)/SBA-15 Catalysts: Effects of the Metal Loading on the Catalytic Activity

Mesoporous Cu(Fe)/SBA-15 catalysts were prepared with distinct metal loadings of ca. 2–10 wt.%. A detailed set of characterizations using X-ray diffraction (XRD), electron paramagnetic resonance (EPR), transmission electron microscopy (TEM), scanning electron microscopy coupled to energy dispersive spectroscopy (SEM-EDS), Mössbauer spectroscopy, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy was performed to correlate the relationship among structure, electronic properties and catalytic performances. All solids were evaluated in the selective catalytic reduction of NOx in the presence of CO (CO-SCR). The influence of the metal loadings on the overall activity indicated that introducing high amounts of Fe or Cu on the catalysts was beneficial to form either CuO or α-Fe2O3 clusters. Cux/SBA-15 series exhibited more efficient activity and poison-tolerant ability during CO-SCR reaction, in contrast to Fex/SBA-15. In spite of the Fe species introduced on SBA-15 having structural features similar to those of Cu ones, low interactions among Fe nanoparticles, silica and clusters impeded the high performances of Fe10/SBA-15. XPS revealed the Fe species in a more oxidized state, indicating the stability of the solid after the catalytic tests, in agreement with EPR and Raman spectroscopy. Cu8/SBA-15 worked better, being recyclable due to the interaction of the Cu2+ ions with SBA-15, avoiding the deactivation of the catalyst.

Promising Electrocatalytic Water and Methanol Oxidation Reaction Activity by Nickel Doped Hematite/Surface Oxidized Carbon Nanotubes Composite Structures

Tailoring the precise construction of non-precious metals and carbon-based heterogeneous catalysts for electrochemical oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) is crucial for energy conversion applications. Herein, this work reports the composite of Ni doped Fe₂ O₃ (Ni-Fe₂ O₃ ) with mildly oxidized multi-walled CNT (O-CNT) as an outstanding Mott-Schottky catalyst for OER and MOR. O-CNT acts as a co-catalyst which effectively regulates the charge transfer in Ni-Fe₂ O₃ and thus enhances the electrocatalytic performance. Ni-Fe₂ O₃ /O-CNT exhibits a low onset potential of 260 mV and overpotential 310 mV @ 10 mA cm^-2 for oxygen evolution. Being a Mott-Schottky catalyst, it achieves the higher flat band potential of -1.15 V with the carrier density of 0.173×10²⁴  cm^-3 . Further, in presence of 1 M CH₃ OH, it delivers the MOR current density of 10 mA cm^-2 at 1.46 V vs. RHE. The excellent electrocatalytic OER and MOR activity of Ni-Fe₂ O₃ /O-CNT could be attributed to the synergistic interaction between Ni-doped Fe₂ O₃ and O-CNT.

From Himba indigenous knowledge to engineered Fe2O3 UV-blocking green nanocosmetics

This contribution reports on the physical properties of the natural Namibian red Ochre used by the Himba Community in a form of a formulation, so called Otjize as a skin protective and beauty cream. The morphological and crystallographic studies of this red ochre validated its nano-scaled dominating phase of rhombohedral α-Fe₂O₃ nanocrystals with an additional hydrolized oxide component in a form of γ-FeOOH. The optical investigations showed that such a red ochre exhibits an exceptional UV filtration and a significant IR reflectivity substantiating its effectiveness as an effective UV-blocking & solar heat IR reflector in support of the low skin cancer rate within the Namibian Himba community. In addition, such nanocrystals exhibited a non-negligible antibacterial response against E. Coli & S. Aurus. This study seems confirming the effectiveness of the indigenous Otjize as an effective skin UV protection cream with a sound antimicrobial efficacy against e-Coli & S-Aurus.

CeFe-Based Bead Nanocomposites as Catalysts for Oxidation of Ethylbenzene Reaction

Oxides with good catalytic performances and more selectivity to valuable chemicals attract numerous research interests for the oxidation of hydrocarbon fuels. Taking advantage of the nanocasting route, CeFe-based nanocomposites were prepared and characterized to achieve superior stability in the oxidation of cyclic compounds. Adding a third metal (Me = Ni2+, Mn2+/Mn3+ or Co2+/Co3+) to the CeFe-based oxide helped the formation of Ce3+/Ce4+, Fe2+/Fe3+ and active couples in the ternary nanocomposites. The solids having a spherical morphology and good textural properties enabled the formation of promising ternary oxide catalysts for the oxidation of ethylbenzene compared with those of binary and single monoxide nanocomposites. The close contact among the Ce3+/Ce4+ and Fe2+/Fe3+ pairs with Ni2+ species provided the formation of a highly stable CeFeNi catalyst with enhanced performance in the oxidation of cyclic compounds such as ethylbenzene, styrene and benzyl alcohol substrates.

Solution Combustion Synthesis of Nanoscale Materials

Solution combustion is an exciting phenomenon, which involves propagation of self-sustained exothermic reactions along an aqueous or sol-gel media. This process allows for the synthesis of a variety of nanoscale materials, including oxides, metals, alloys, and sulfides. This Review focuses on the analysis of new approaches and results in the field of solution combustion synthesis (SCS) obtained during recent years. Thermodynamics and kinetics of reactive solutions used in different chemical routes are considered, and the role of process parameters is discussed, emphasizing the chemical mechanisms that are responsible for rapid self-sustained combustion reactions. The basic principles for controlling the composition, structure, and nanostructure of SCS products, and routes to regulate the size and morphology of the nanoscale materials are also reviewed. Recently developed systems that lead to the formation of novel materials and unique structures (e.g., thin films and two-dimensional crystals) with unusual properties are outlined. To demonstrate the versatility of the approach, several application categories of SCS produced materials, such as for energy conversion and storage, optical devices, catalysts, and various important nanoceramics (e.g., bio-, electro-, magnetic), are discussed.

S, Philip D. Synthesis of biogenic hematite (α-Fe2O3) nanoparticles for antibacterial and nanofluid applications

A novel approach for the synthesis of environmentally benign bioactive α-Fe₂O₃ nanoparticles capable of enhancing thermal conductivity.

Shape tailored green synthesis of CeO₂:Ho³⁺ nanopowders, its structural, photoluminescence and gamma radiation sensing properties

CeO2:Ho(3+) (1-9 mol%) nanopowders have been prepared by efficient and environmental friendly green combustion method using Aloe vera gel as fuel for the first time. The final products are well characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), fourier transform infrared (FTIR). Bell, urchin, core shell and flower like morphologies are observed with different concentrations of the A. vera gel. It is apparent that by adjusting the concentration of the gel, considerable changes in the formation of CeO2:Ho(3+) nano structures can be achieved. Photoluminescence (PL) studies show green (543, 548 nm) and red (645, 732 nm) emissions upon excited at 400 nm wavelength. The emission peaks at ∼526, 548, 655 and 732 nm are associated with the transitions of (5)F3→(5)I8, (5)S2→(5)I8, (5)F5→(5)I8 and (5)S2→(5)I7, respectively. Three TL glow peaks are observed at 118, 267 and 204°C for all the γ irradiated samples which specify the surface and deeper traps. Linear TL response in the range 0.1-2kGy shows that phosphor is fairly useful as γ radiation dosimeter. Kinetic parameters associated with the glow peaks are estimated using Chen's half width method. The CIE coordinate values show that phosphor is quite useful for the possible applications in WLEDs as orange red phosphor.