Synthesis of hollow gold nanoparticles on the surface of indium tin oxide glass and their application for plasmonic biosensor

Plasmonic Nanostructure Biosensors: A Review

Plasmonic nanostructure biosensors based on metal are a powerful tool in the biosensing field. Surface plasmon resonance (SPR) can be classified into localized surface plasmon resonance (LSPR) and propagating surface plasmon polariton (PSPP), based on the transmission mode. Initially, the physical principles of LSPR and PSPP are elaborated. In what follows, the recent development of the biosensors related to SPR principle is summarized. For clarity, they are categorized into three groups according to the sensing principle: (i) inherent resonance-based biosensors, which are sensitive to the refractive index changes of the surroundings; (ii) plasmon nanoruler biosensors in which the distances of the nanostructure can be changed by biomolecules at the nanoscale; and (iii) surface-enhanced Raman scattering biosensors in which the nanostructure serves as an amplifier for Raman scattering signals. Moreover, the advanced application of single-molecule detection is discussed in terms of metal nanoparticle and nanopore structures. The review concludes by providing perspectives on the future development of plasmonic nanostructure biosensors.

Metallic nanoparticles as drug delivery system for the treatment of cancer

INTRODUCTION

The targeted delivery of anticancer agents to tumor is a major challenge because most of the drugs show off-target effect resulting in nonspecific cell death. Multifunctionalized metallic nanoparticles (NPs) are explored as new carrier system in the era of cancer therapeutics. Researchers investigated the potential of metallic NPs to target tumor cells by active and passive mechanisms, thereby reducing off-target effects of anticancer agents. Moreover, photocatalytic activity of upconversion nanoparticles (UCNPs) and the enhanced permeation and retention (EPR) effect have also gained wide potential in cancer treatment. Recent advancement in the field of nanotechnology highlights their potency for cancer therapy.

AREAS COVERED

This review summarizes the types of gold and silver metallic NPs with targeting mechanisms and their potentiality in cancer therapy.

EXPERT OPINION

Recent advances in the field of nanotechnology for cancer therapy offer high specificity and targeting efficiency. Targeting tumor cells through mechanistic pathways using metallic NPs for the disruption/alteration of molecular profile and survival rate of the tumor cells has led to an effective approach for cancer therapeutics. This alteration in the survival rate of the tumor cells might decrease the proliferation thereby resulting in more efficient management in the treatment of cancer.

Synthetic Methodologies to Gold Nanoshells: An Overview

Gold nanostructures that can be synthetically articulated to adapt diverse morphologies, offer a versatile platform and tunable properties for applications in a variety of areas, including biomedicine and diagnostics. Among several conformational architectures, gold nanoshells provide a highly advantageous combination of properties that can be fine-tuned in designing single or multi-purpose nanomaterials, especially for applications in biology. One of the important parameters for evaluating the efficacy of gold nano-architectures is their reproducible synthesis and surface functionalization with desired moieties. A variety of methods now exist that allow fabrication and chemical manipulation of their structure and resulting properties. This review article provides an overview and a discussion of synthetic methodologies to a diverse range of gold nanoshells, and a brief summary of surface functionalization and characterization methods employed to evaluate their overall composition.

Composite CuFe1-xSnxO2/p-type silicon photodiodes

CuFe_1-xSn_xO₂ composite thin film/p-type silicon diodes were prepared on substrate by sol-gel method (x=0.00, 0.01, 0.03, 0.05, 0.07). The structure of CuFe_1-xSn_xO₂ composite thin films was studied using XRD analysis and films exhibited amorphous behavior. The elemental compositions and surface morphology of the films were characterized using SEM and EDX. EDX results confirmed the presence of the compositional elements. The optical band gap of CuFe_1-xSn_xO₂ composite thin films was determined using the optic spectra. The optical band gaps of the CuFe_1-xSn_xO₂ composite thin films were calculated using optical data and were found to be 3.75, 3.78, 3.80, 3.85 and 3.83eV for x=0.00, 0.01, 0.03, 0.05 and 0.07, respectively. The photoresponse and electrical properties of the Al/CuFe_1-xSn_xO₂/p-Si/Al diode were studied. The barrier height and ideality factor were determined to be averagely 0.67eV and 2.6, respectively. The electrical and photoresponse characteristics of the diodes have been investigated under dark and solar light illuminations, respectively. The interface states were used to explain the results obtained in present study. CuFe_1-xSn_xO₂ photodiodes exhibited a high photoresponsivity to be used in optoelectronic applications.

Formation of substrate-based gold nanocage chains through dealloying with nitric acid

Metal nanocages have raised great interest because of their new properties and wide applications. Here, we report on the use of galvanic replacement reactions to synthesize substrate-supported Ag-Au nanocages from silver templates electrodeposited on transparent indium tin oxide (ITO) film coated glass. The residual Ag in the composition was dealloyed with 10% nitric acid. It was found that chains of Au nanocages were formed on the substrate surface during dealloying. When the concentration of HNO3 increased to 20%, the structures of nanocages were damaged and formed crescent or semi-circular shapes. The transfer process on the substrate surface was discussed.

Shedding light on the growth of gold nanoshells

Nanostructured particles containing noble metals can have highly tunable localized surface plasmon resonances and are therefore of particular interest for numerous applications. Nanoshells comprising a dielectric core and gold or silver shell are a widely researched systems because of the strong dependence of their optical properties on the ratio of core diameter to shell thickness. Although seeded-growth procedures have been developed to produce these particles, the many reported studies show significant variation in the nanoshell morphologies and hence optical properties. In order to establish processes that reproducibly synthesize nanoshells with high optical quality, it is necessary to develop techniques that monitor changes at the core particle surface during shell growth. For that purpose, we have carried out in situ nonlinear second-harmonic scattering (SHS) and linear vis-NIR extinction spectroscopy simultaneously during the seeded growth of gold nanoshells on silica core particles. Our SHS measurements show a striking variation in the nonlinear optical properties of the growing gold nanoshells. In comparison with linear optical measurements and with scanning electron microscopy (SEM) images made of gold nanoshells produced with varying shell completenesses, the SHS signal was observed to reach a peak intensity at a stage prior to shell closure. We attribute this high sensitivity of the SHS signal to the incomplete nanoshell surface morphology to the generation and subsequent degeneration of regions of electric field enhancement at gaps between isolated gold islands, which grow and coalesce. This conclusion is corroborated by finite-difference time-domain simulations of incomplete nanoshells. We suggest that the in situ analytical approach demonstrated here offers significant promise for future activities regarding the in-process optimization of the morphology and optical properties of metal nanoshells and other nanostructured plasmonic particles.