Single molecule laser spectroscopy

Photocatalytic degradation of methylene blue dye by ZnO nanoparticle thin films, using Sol-gel technique and UV laser irradiation

The focus of the current work is the study of the effect of the photo-catalytic activity of ZnO nanoparticles. The photocatalytic destruction of methylene blue dye, a common water contaminant, was used to assess the photocatalytic efficiency of the ZnO nanoparticles from its aqueous solution by using ZnO nanoparticles thin film under UV light and laser irradiation. Sol-gel methods prepared ZnO nanoparticle thin films. X-ray diffraction and a field-emitted scanning electron microscope were utilized to examine the structure of the produced ZnO nanoparticles. An extended characterization by laser-based fluorescence and UV-visible spectroscopic techniques. The effects of operational parameters such as photo-catalyst load and contact time on photocatalytic degradation of methylene blue were investigated. The recent study's findings showed that irradiation with a UV laser increases with power density 25 µW/cm2, the photo-catalytic rate. The UV spectra show decay for the band at 664nm decreased and the concentration of M.B. in monomer form decayed to 26% of the original concentration in 24 h, while the band at 612 which is related to the dimer M.B. molecules was not affected. The laser irradiation did the same for monomer M.B. molecules in only 3 h, while the dimer decreased to 28% of its original concentration. The reaction mechanism has been discussed by molecular modelling. Quantum mechanical calculations at B3LYP/6-311g(d,p) level indicated that methylene blue changed from dimers to monomers in the existence of ZnO. The current results present a method for degrading M.B. not only in wastewater but also in the industrial waste scale.

Photoluminescence enhancement and excellent thermal stability of Ca2ZnSi2O7:Pr3+ red-emitting phosphors through charge compensator A+ (Li+, Na+ and K+) co-doping for w-LED applications

The red-emitting Ca2ZnSi2O7:Pr3+ phosphor was synthesized via a solid-state method and alkali metal ions A+ (Li+, Na+, K+) were introduced to improve the photoluminescence performance of Pr3+. XRD results confirmed that the sample structure did not change markedly with appropriate Pr3+/A+ co-doping. Under the blue light excitation of 447 nm, the as-prepared Ca2ZnSi2O7:Pr3+ efficiently emitted a characteristic red luminescence peak at 601 nm. The luminescence intensity of Pr3+ was obviously enhanced with A+ co-doping due to the charge compensation effect and the emission intensity of Ca2ZnSi2O7:0.005Pr3+, 0.005Na+ reached 142.1% compared to Ca2ZnSi2O7:0.005Pr3+. Furthermore, at 210 °C the luminescence intensity of the Ca2ZnSi2O7:0.005Pr3+, 0.005Na+ phosphor remained at ∼93% compared to at 30 °C, showing high thermal stability. The w-LED device packaged with Ca2ZnSi2O7:0.005Pr3+, 0.005Na+ produced a bright white emission. All these results indicated the potential application prospects of red-emitting Ca2ZnSi2O7:Pr3+, A+ phosphors in the field of white light-emitting diodes.

Reactive oxygen species creation by laser-irradiated indocyanine green as photodynamic therapy modality: an in vitro study

Applications of lasers in phototherapy have been the trend for the last few decades. The photodynamic therapy process normally depends on photosensitizers and laser beams. Through this study, indocyanine green has been used as a photosensitizer, which is normally activated using laser lines between 750 and 805 nm. The activity of the indocyanine green to do fluorescence by other pulsed laser sources has been tested by fluorescence technique, and it has been proven that the laser lines at 810, 940, and 980nm are able to excite the indocyanine green with different extents. The indocyanine green activation has been tested by several laser lines (810, 940, and 980 nm) commonly used as surgical lasers. The generated oxygen has been measured after irradiating the indocyanine green with the different laser lines. A comparison has been made between laser irradiation as a pinpoint and a broad beam. It is found that the wide beam is more effective in activating oxygen production. In the end, it is concluded that lines 810 and 940nm were effective in activating the used dye, while the 980nm activity did not show enough efficiency.

Original and liposome-modified indocyanine green-assisted fluorescence study with animal models

Medical diagnosis heavily relies on the use of bio-imaging techniques. One such technique is the use of ICG-based biological sensors for fluorescence imaging. In this study, we aimed to improve the fluorescence signals of ICG-based biological sensors by incorporating liposome-modified ICG. The results from dynamic light scattering and transmission electron microscopy showed that MLM-ICG was successfully fabricated with a liposome diameter of 100-300 nm. Fluorescence spectroscopy showed that MLM-ICG had the best properties among the three samples (Blank ICG, LM-ICG, and MLM-ICG), as samples immersed in MLM-ICG solution achieved the highest fluorescence intensity. The NIR camera imaging also showed a similar result. For the rat model, the best period for fluorescence tests was between 10 min and 4 h, where most organs reached their maximum fluorescence intensity except for the liver, which continued to rise. After 24 h, ICG was excreted from the rat's body. The study also analyzed the spectra properties of different rat organs, including peak intensity, peak wavelength, and FWHM. In conclusion, the use of liposome-modified ICG provides a safe and optimized optical agent, which is more stable and efficient than non-modified ICG. Incorporating liposome-modified ICG in fluorescence spectroscopy could be an effective way to develop novel biosensors for disease diagnosis.

Potential toxicity of bisphenol A to α-chymotrypsin and the corresponding mechanisms of their binding

Bisphenol A (BPA) is an endocrine disruptor widely existing in plastics and resins, which can accumulate in animals and human bodies, posing a potential threat to the physiological and biochemical reactions of human beings or other organisms. α-Chymotrypsin is a kind of proteolytic enzyme existing in humans and animals, which can cause diseases when its activity is excessive. However, there is a lack of research on the mechanism of endocrine disruptors affecting α-chymotrypsin activity. In this study, the interaction between BPA and α-chymotrypsin was proved via multiple spectroscopic approaches, enzyme activity change, isothermal titration calorimetry and molecular docking. Results showed that α-chymotrypsin's polypeptide chains were unfolded, and protein skeletons were loosened with the exposure to BPA. α-Helix content increased and β-sheet content was decreased. The particle size of the BPA-α-chymotrypsin complex became smaller. Fluorescence sensitization may also be explained by a perturbation of the chromophore Trp 141. The thermodynamic parameters of the binding reaction were measured by isothermal titration calorimetry (ITC), which showed that there was hydrophobic interaction between BPA and α-chymotrypsin, which was consistent with the results of molecular docking. Moreover, BPA may stop near the active center of α-chymotrypsin and interact with the key residues His 57 and Ser 195. The above phenomenon explained the result that the activity of α-chymotrypsin increased to 139% when exposed to high dose BPA (40 μM). Taken together, the effects of BPA on the structure and function of α-chymotrypsin were clarified at the molecular level, which made up the gap in the mechanism of BPA on the proteolytic enzyme, and provided a reliable basis for disease avoidance and prevention.

The Effect of a Fluorophore Photo-Physics on the Lipid Vesicle Diffusion Coefficient Studied by Fluorescence Correlation Spectroscopy

Fluorescence Correlation Spectroscopy (FCS) is a technique, which allows determination of the diffusion coefficient and concentration of fluorescent objects suspended in the solution. The measured parameter is the fluctuation of the fluorescence signal emitted by diffusing molecules. When 100 nm DOPC vesicles labeled with various fluorescent dyes (Fluorescein-PE, NBD-PE, Atto488 DOPE or βBodipy FL) were measured, different values of diffusion coefficients have been obtained. These diffusion coefficients were different from the expected values measured using the dynamic light scattering method (DLS). The FCS was initially developed for solutions containing small fluorescent molecules therefore the observed inconsistency may result from the nature of vesicle suspension itself. The duration of the fluorescence signal may depend on the following factors: the exposure time of the labeled object to the excitation beam, the photo-physical properties (e.g., stability) of a fluorophore, the theoretical model used for the calculations of the diffusion coefficient and optical properties of the vesicle suspension. The diffusion coefficients determined for differently labeled liposomes show that its dependence on vesicle size and quantity of fluorescent probed used for labeling was significant demonstrating that the fluorescence properties of the fluorophore itself (bleaching and/or blinking) were critical factors for a correct outcome of FCS experiment. The new, based on combined FCS and DLS measurements, method for the determination of the focal volume prove itself to be useful for the evaluation of a fluorescence dye with respect to its applicability for FCS experiment.