Phytosynthesis of stable Au, Ag and Au-Ag alloy nanoparticles using J. sambac leaves extract, and their enhanced antimicrobial activity in presence of organic antimicrobials

Green synthesis of silver/silver oxide nanostructures using the Malva sylvestris extract prior to simultaneous distillation extraction: synthesis, phytochemical and biological analysis

Nanotechnology and nanoscience are due to their numerous uses in medicine, engineering, and water pollution sensors and their expanding research fields. In this study, the essential oil, methanolic extract, and biosynthesized silver/silver oxide nanostructures (Ag/AgO NSs) using the aqueous extract of the plant were prepared. The phytochemical compounds of the extract and essential oil were analyzed using gas chromatography/mass spectrometry (GC/MS), respectively. The GC/MS technique identified 34 compounds in the essential oil of the plant with the major constituents including oleic acid (18.5%), palmitic acid (11.08%), phytone (6.64%), p-vinylguaiacol (6.4%), and phytol (4.23%). After the phytochemical identification, the total flavonoid and polyphenol contents of the extract was determined, too. Prodelphinidin B3 compound in the Malva sylvestris extract was analyzed and detected by high-performance liquid chromatography/ultraviolet detector (HPLC-UV), at a retention time of around 10 min. In addition, M. sylvestris extract was used for green synthesis of Ag/AgO NSs. The as-prepared NPs were characterized using X-ray diffraction (XRD), UV-visible absorption spectroscopy, scanning electron microscope equipped with energy-dispersive X-ray spectroscopy (SEM/EDS), Brunauer-Emmett-Teller (BET), Barrett-Joyner-Halenda (BJH), and Fourier transform infrared (FT-IR) analyses. Surface plasmon resonance (SPR) absorption at λmax 320 nm in the UV-vis spectra confirms the formation of Ag/AgO NSs. The crystalline structure of Ag/AgO NSs was confirmed by XRD analysis. The nanoparticles were found to have a small size, measuring 64.16 nm, 44.33 nm, and 50 nm using the Williamson-Hall, Scherrer, and SEM/EDS methods, respectively. Besides, that spherical shape of Ag NPs with good size distribution was observed in the SEM/EDS analysis. The small size, around 50 nm, and spherical shape of Ag/AgO NSs with good size distribution were observed in the SEM/EDS analysis. Besides, the antibacterial activity of the extract was evaluated against three pathogenic bacteria, by disk diffusion method. Significant antibacterial activity was observed for the prepared extracts of M. sylvestris against the bacteria (Bacillus subtilis, Escherichia coli, and Pseudomonas aeruginosa), and the results were compared with the known antibiotics such as amoxicillin, cephalexin, erythromycin, and fluconazole.

Progress and challenges in bacterial infection theranostics based on functional metal nanoparticles

The rapid proliferation and infection of bacteria, especially multidrug-resistant bacteria, have become a great threat to global public health. Focusing on the emergence of "super drug-resistant bacteria" caused by the abuse of antibiotics and the insufficient and delayed early diagnosis of bacterial diseases, it is of great research significance to develop new technologies and methods for early targeted detection and treatment of bacterial infection. The exceptional effects of metal nanoparticles based on their unique physical and chemical properties make such systems ideal for the detection and treatment of bacterial infection both in vitro and in vivo. Metal nanoparticles also have admirable clinical application prospects due to their broad antibacterial spectrum, various antibacterial mechanisms and excellent biocompatibility. Herein, we summarized the research progress concerning the mechanism of metal nanoparticles in terms of antibacterial activity together with the detection of bacterial. Representative achievements are selected to illustrate the proof-of-concept in vitro and in vivo applications. Based on these observations, we also give a brief discussion on the current problems and perspective outlook of metal nanoparticles in the diagnosis and treatment of bacterial infection.

Eco-Friendly Synthesis, Characterization, and Biomedical Applications of Biosynthesized Bimetallic Silver-Gold Nanoparticles by Culture Supernatant of Aspergillus niger

Green synthesis of bimetallic nanoparticles of noble metals is highly desirable in nanomedicine because of their potential use as anticoagulant, thrombolytic and anticancer agents. In this study, it was discovered that the filamentous fungus Aspergillus niger proved effective in producing bimetallic Ag-Au nanoparticles. A. niger culture supernatant was able to produce Ag-AuNPs by reducing the solution of chloroauric acid/silver nitrate (1.0:1.0 mM) within 2 min at 100 °C and pH 8. Experimental Ag-AuNP detection was performed by visually observing the color change to reddish brown. The produced nanoparticles displayed maximal absorbance at 530 nm in UV-vis spectroscopy. According to transmission electron microscopy, most of the nanoparticles were spherical, with a mean diameter of 8-10 nm. The biosynthesis of Ag-AuNPs by A. niger was confirmed by Fourier transform infrared spectroscopy, X-ray diffraction and energy dispersive X-ray analytical techniques. Its zeta potential was discovered to be -34.01 mV. The biosynthesized Ag-AuNPs exhibited effective thrombolytic and antiplatelet aggregation actions by totally preventing and dissolving the blood clot which was verified by microscopic examination, amelioration of blood coagulation assays, and carrageenan-induced tail thrombosis model. The findings verified the effectiveness of biosynthesized Ag-AuNPs as a powerful antitumor agent against HepG2 and A549 cell lines with IC50 values of 15.57 and 27.07 μg/mL, respectively. Crystal violet assay validated the cytopathic effects of Ag-AuNPs on A549 and HepG2 cell lines. Therefore, the produced Ag-AuNPs from A. niger are a promising candidate in the management of thrombosis.

Ag/Au-incorporated trimethyl chitosan-shell hybrid particles as reinforcing and antioxidant fillers for trimethyl chitosan hydrogel

N,N,N-Trimethyl chitosan (TMC) is a quaternized chitosan with versatile biological features. However, low mechanical strength limits its uses, for example, as hydrogels for tissue engineering applications. This study illustrates a viable synthesis of metal/polymer hybrid, core-shell colloidal particles and their use as reinforcing and antioxidant fillers for TMC hydrogels. The core-shell particles were initially synthesized by surfactant-free emulsion polymerization, induced by a photo-redox initiating system of riboflavin assisted by a 3° amine and 2° alcohol co-initiators. The synthesized core-shell particles were based on two polymeric shells: TMC and chitosan, and two polymeric cores: poly (hydroxypropyl methacrylate) (PHPMA) and poly(2-hydroxy ethyl methacrylate) (PHEMA). The presence of both 3° amine on TMC and 2° alcohol on HPMA monomer enhanced the photopolymerization performance. The TMC-based particles had sizes of 122-154 nm and zeta potentials of 10-35 mV, bringing the colloidal stability in the 4-10 pH range. Furthermore, due to the presence of TMC on the shell layer, the core-shell particles could be used as templates to grow the Ag/Au bimetallic nanoparticles with alloy and core-shell types through a thermal reduction. The prepared hybrid particles were incorporated in TMC hydrogels as a multifunctional filler, improving their mechanical and antioxidant properties.

Rapid, microwave-assisted deposition of anisotropic silver nanostructures on various substrates

A facile, rapid, and scalable in situ microwave-assisted solvothermal technique (MAST) has been developed to deposit anisotropic silver nanoparticles (AgNP) on various substrates in a solution medium. SEM-EDS and XRD were used to characterize the morphology and structure of the deposits. Deposition on non-patterned aluminium led to near-spherical AgNP agglomerates all across the surface. Deposition on the glass at optimum solution concentration led to mirror-like coatings comprising spherical ∼50 nm particles, whereas no coating occurred at lower concentrations. AgNPs decorated the hexagonal pattern formed on a nano-patterned aluminium (NPA) substrate. Among various precursor concentrations used for deposition on NPA, the 10 μM concentration resulted in conformal deposition, with nanoparticles decorating the hexagons in NPA. In contrast, AgNP density was lower in the concave dimples on NPA. Our work demonstrates a quick and easy approach for the AgNPs' deposition, with control over size, and morphology. It can be used for deposition on large substrates, potentially making it suitable for surface-enhanced spectroscopic applications.

Synthesis of Silver Nanoparticles Using Extracts from Different Parts of the Paullinia cupana Kunth Plant: Characterization and In Vitro Antimicrobial Activity

The green synthesis of silver nanoparticles (AgNPs) can be developed using safe and environmentally friendly routes, can replace potentially toxic chemical methods, and can increase the scale of production. This study aimed to synthesize AgNPs from aqueous extracts of guarana (Paullinia cupana) leaves and flowers, collected in different seasons of the year, as a source of active biomolecules capable of reducing silver ions (Ag+) and promoting the stabilization of colloidal silver (Ag0). The plant aqueous extracts were characterized regarding their metabolic composition by liquid chromatography coupled to high-resolution mass spectrometry (UHPLC-HRMS/MS), phenolic compound content, and antioxidant potential against free radicals. The synthesized AgNPs were characterized by UV/Vis spectrophotometry, dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), transmission electron microscopy (TEM), and scanning electron microscopy coupled to energy-dispersive X-ray spectrometry (EDX). The results demonstrated that the chemical characterization indicated the presence of secondary metabolites of many classes of compounds in the studied aqueous extracts studied, but alkaloids and flavonoids were predominant, which are widely recognized for their antioxidant capabilities. It was possible to notice subtle changes in the properties of the nanostructures depending on parameters such as seasonality and the part of the plant used, with the AgNPs showing surface plasmon resonance bands between 410 and 420 nm using the leaf extract and between 440 and 460 nm when prepared using the flower extract. Overall, the average hydrodynamic diameters of the AgNPs were similar among the samples (61.98 to 101.6 nm). Polydispersity index remained in the range of 0.2 to 0.4, indicating that colloidal stability did not change with storage time. Zeta potential was above -30 mV after one month of analysis, which is adequate for biological applications. TEM images showed AgNPs with diameters between 40.72 to 48.85 nm and particles of different morphologies. EDX indicated silver content by weight between 24.06 and 28.81%. The synthesized AgNPs exhibited antimicrobial efficacy against various pathogenic microorganisms of clinical and environmental interest, with MIC values between 2.12 and 21.25 µg/mL, which is close to those described for MBC values. Therefore, our results revealed the potential use of a native species of plant from Brazilian biodiversity combined with nanotechnology to produce antimicrobial agents.

Adsorption and photodegradation of organic contaminants by silver nanoparticles: isotherms, kinetics, and computational analysis

In view of the widespread and distribution of several classes and types of organic contaminants, increased efforts are needed to reduce their spread and subsequent environmental contamination. Although several remediation approaches are available, adsorption and photodegradation technologies are presented in this review as one of the best options because of their environmental friendliness, cost-effectiveness, accessibility, less selectivity, and wider scope of applications among others. The bandgap, particle size, surface area, electrical properties, thermal stability, reusability, chemical stability, and other properties of silver nanoparticles (AgNPS) are highlighted to account for their suitability in adsorption and photocatalytic applications, concerning organic contaminants. Literatures have been reviewed on the application of various AgNPS as adsorbent and photocatalyst in the remediation of several classes of organic contaminants. Theories of adsorption have also been outlined while photocatalysis is seen to have adsorption as the initial mechanism. Challenges facing the application of silver nanoparticles have also been highlighted and possible solutions have been presented. However, current information is dominated by applications on dyes and the view of the authors supports the need to strengthen the usefulness of AgNPS in adsorption and photodegradation of more classes of organic contaminants, especially emerging contaminants. We also encourage the simultaneous applications of adsorption and photodegradation to completely convert toxic wastes to harmless forms.

Matcha-silver nanoparticles reduce gamma radiation-induced oxidative and inflammatory responses by activating SIRT1 and NLRP-3 signaling pathways in the Wistar rat spleen

The biogenic synthesis of nanoparticles has drawn significant attention. The spleen is the largest lymphatic organ that is adversely impacted during irradiation. The current study was designated to evaluate the possible anti-inflammatory effect of matcha-silver nanoparticles (M-AgNPs) to reduce inflammation associated with γ-radiation induced-oxidative stress and inflammation in rats' spleen. Silver nanoparticles (AgNPs) were synthesized by biogenic synthesis using a green sonochemical method from matcha (M) green tea. The obtained M-AgNPs were extensively characterized by dynamic light scattering, transmission electron microscopy, thermogravimetric analysis, and Fourier-transform infrared spectroscopy. Using zetasizer analysis, the surface charge, particle size, and radical scavenging DPPH assay of M-AgNPs were also examined. Biocompatibility and cytotoxicity were analyzed by MTT assay, and the IC50 was calculated. Four groups of 24 Wistar rats each had an equal number of animals. The next step involved measuring the levels of oxidative stress markers in the rat splenic tissue. Additionally, the amounts of inflammatory protein expression were evaluated using the ELISA analysis. The results indicated the formation of spherical nanoparticles of pure Ag° coated with matcha polyphenols at the nanoscale, as well as uniform monodisperse particles suited for cellular absorption. Results revealed that M-AgNPs improved all biochemical parameters. Furthermore, M-AgNPs relieve inflammation by reducing the expression of NOD-like receptor family pyrin domain-containing 3 (NLRP3), interleukin-1β (IL-1β), and enhancing the levels of ileSnt information regulator 1 (SIRT1). Histopathological examinations demonstrated the ability of M-AgNPs to overcome the damage consequent to irradiation and recover the spleen's cellular structure. These results confirmed that matcha is a potential biomaterial for synthesizing AgNPs, which can be exploited for their anti-inflammatory activity.

Exploring the biological application of Penicillium fimorum-derived silver nanoparticles: In vitro physicochemical, antifungal, biofilm inhibitory, antioxidant, anticoagulant, and thrombolytic performance

This study showed the anti-candida, biofilm inhibitory, antioxidant, anticoagulant, and thrombolytic properties of biogenic silver nanoparticles (AgNPs) fabricated by using the supernatant of Penicillium fimorum (GenBank accession number OQ568180) isolated from soil. The biogenic AgNPs were characterized by using different analytical techniques. A sharp surface plasmon resonance (SPR) peak of the colloidal AgNPs at 429.5 nm in the UV-vis spectrum confirmed the fabrication of nanosized silver particles. The broth microdilution assay confirmed the anti-candida properties of AgNPs with a minimum inhibitory concentration (MIC) of 4 μg mL^-1. In the next step, the protein and DNA leakage assays as well as reactive oxygen species (ROS) assay were performed to evaluate the possible anti-candida mechanisms of AgNPs representing an increase in the total protein and DNA of supernatant along with a climb-up in ROS levels in AgNPs-treated samples. Flow cytometry also confirmed a dose-dependent cell death in the AgNPs-treated samples. Further studies also confirmed the biofilm inhibitory performance of AgNPs against Candia albicans. The AgNPs at the concentrations of MIC and 4*MIC inhibited 79.68 ± 14.38% and 83.57 ± 3.41% of biofilm formation in C. albicans, respectively. Moreover, this study showed that the intrinsic pathway may play a significant role in the anticoagulant properties of AgNPs. In addition, the AgNPs at the concentration of 500 μg mL^-1, represented 49.27%, and 73.96 ± 2.59% thrombolytic and DPPH radical scavenging potential, respectively. Promising biological performance of AgNPs suggests these nanomaterials as a good candidate for biomedical and pharmaceutical applications.

Principles and Applications of Resonance Energy Transfer Involving Noble Metallic Nanoparticles

Over the past several years, resonance energy transfer involving noble metallic nanoparticles has received considerable attention. The aim of this review is to cover advances in resonance energy transfer, widely exploited in biological structures and dynamics. Due to the presence of surface plasmons, strong surface plasmon resonance absorption and local electric field enhancement are generated near noble metallic nanoparticles, and the resulting energy transfer shows potential applications in microlasers, quantum information storage devices and micro-/nanoprocessing. In this review, we present the basic principle of the characteristics of noble metallic nanoparticles, as well as the representative progress in resonance energy transfer involving noble metallic nanoparticles, such as fluorescence resonance energy transfer, nanometal surface energy transfer, plasmon-induced resonance energy transfer, metal-enhanced fluorescence, surface-enhanced Raman scattering and cascade energy transfer. We end this review with an outlook on the development and applications of the transfer process. This will offer theoretical guidance for further optical methods in distance distribution analysis and microscopic detection.

Biosynthesis of Gold and Silver Nanoparticles Using Phytochemical Compounds

Gold and silver nanoparticles are nanoparticles that have been widely used in various fields and have shown good benefits. The method of nanoparticle biosynthesis utilizing plant extracts, also known as green synthesis, has become a promising method considering the advantages it has compared to other synthesis methods. This review aims to give an overview of the phytochemical compounds in plants used in the synthesis of gold and silver nanoparticles, the nanoparticle properties produced using plant extracts based on the concentration and structure of phytochemical compounds, and their applications. Phytochemical compounds play an important role as reducing agents and stabilizers in the stages of the synthesis of nanoparticles. Polyphenol compounds, reducing sugars, and proteins are the main phytochemical compounds that are responsible for the synthesis of gold and silver nanoparticles. The concentration of phytochemical compounds affects the physical properties, stability, and activity of nanoparticles. This is important to know to be able to overcome limitations in controlling the physical properties of the nanoparticles produced. Based on structure, the phytochemical compounds that have ortho-substituted hydroxyl result in a smaller size and well-defined shape, which can lead to greater activity and stability. Furthermore, the optimal condition of the biosynthesis process is required to gain a successful reaction that includes setting the metal ion concentration, temperature, reaction time, and pH.

Green synthesis and antimicrobial mechanism of nanoparticles: applications in agricultural and agrifood safety

The growing demand for food and its safety are a challenge for agriculture and agrifood. This has led to the incorporation of alternatives such as organic agriculture, the use of biocontrollers, the development of transgenic plants resistant to pathogens and the incorporation of nanotechnology. In this sense, agrochemicals based on nanoparticles (NPs) have been developed. Recently, the green synthesis of NPs has grown rapidly and, for this reason, molecules, microorganisms, fungi and plants are used. Synthesis from plant extracts offers a broad spectrum and, despite the fact that NPs are usually dispersed in size and shape, extensive antimicrobial effectiveness has been demonstrated at nanomolar concentrations. It has been shown that the mechanism of action can be through the dissipation of the driving force of the protons, the alteration of cellular permeability, the formation of bonds with the thiol group of the proteins, the generation of reactive species of oxygen, and the hyperoxidation of DNA, RNA and even the cell membrane. To improve the efficiency of NPs, modifications have been made such as coating with other metals, the addition of antibiotics, detergents and surfactants, as well as the acidification of the solution. Consequently, NPs are considered as a promising method for achieving safety in the agricultural and agrifood area. However, it is necessary to investigate the side effects of NPs, when applied in agroecological systems, on the textural, nutriment and sensory properties of food, as well as the impact on human health. © 2022 Society of Chemical Industry.

In situ engineering of Au-Ag alloy embedded PEDOT nanohybrids at a solvent/non-solvent interface for the electrochemical enzyme-free detection of histamine

Steadfast efforts have been made to develop novel materials and incorporate them into functional devices for practical applications, pushing the research on electroactive materials to the forefront of nano electronics. Liquid/liquid interface-assisted polymerization offers a scalable methodology to fabricate hybrid materials with multifunctional applications, in contrast to the conventional and ubiquitous routes. Here, we explored this efficient and versatile approach toward the in situ tailoring of Au-Ag alloy nanostructures with a conducting polymer, poly(3,4-ethylene-dioxythiophene) (PEDOT). With the appropriate choice of organic and inorganic phases for the distribution of monomer and oxidant, the miscibility restraints of the reactants in a single phase were alleviated. Effective nanostructure tuning of highly crystalline and electroactive PEDOT/Au-Ag alloy has been achieved by varying the molar ratio of Au³⁺/Ag⁺ in the reaction mixture. The as-synthesized composite is further explored to detect neuromodulator histamine (HA), which displays high sensitivity with a limit of detection (LOD) of 1.5 nM, and selectivity even in the presence of various interfering analogs of 10-fold concentration. Subsequently, density functional theory (DFT) simulations are employed to assess the mode of interaction between HA and the electroactive surfaces. The competency to detect HA in preserved food entails its potential in food spoilage monitoring. Furthermore, the detection of histamine generated by sub-cultured human neuronal cells SH-SY5Y proves its practical viability in health monitoring devices.

Metal nanoparticles produced by plants with antibacterial properties against Staphylococcus aureus

Staphylococcus aureus (S. aureus) is a pathogenic bacteria that causes a variety of potentially fatal infections. The emergence of antibiotic-resistant strains of S. aureus has made treatment even more difficult. In recent years, nanoparticles have been used as an alternative therapeutic agent for S. aureus infections. Among various methods for the synthesis of nanoparticles, the method utilizing plant extracts from different parts of a plant, such as root, stem, leaf, flower, seeds, etc. is gaining widespread usage. Phytochemicals present in plant extract are an inexpensive, eco-friendly, natural material that act as reducing and stabilization agent for the nanoparticle synthesis. The utilization of plant-fabricated nanoparticles against S. aureus is currently in trend. The current review discusses recent findings in the therapeutic application of phytofabricated metal-based nanoparticles against Staphylococcus aureus.

Allium sativum@AgNPs and Phyllanthus urinaria@AgNPs: a comparative analysis for antibacterial application

Although medicinal herbs contain many biologically active ingredients that can act as antibiotic agents, most of them are difficult to dissolve in lipids and absorb through biofilms in the gastrointestinal tract. Besides, silver nanoparticles (AgNPs) have been widely used as a potential antibacterial agent, however, to achieve a bactericidal effect, high concentrations are required. In this work, AgNPs were combined into plant-based antibiotic nanoemulsions using biocompatible alginate/carboxyl methylcellulose scaffolds. The silver nanoparticles were prepared by a green method with an aqueous extract of Allium sativum or Phyllanthus urinaria extract. The botanical antibiotic components in the alcoholic extract of these plants were encapsulated with emulsifier poloxamer 407 to reduce the particle size, and make the active ingredients both water-soluble and lipid-soluble. Field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray (EDX) analysis showed that the prepared nanosystems were spherical with a size of about 20 nm. Fourier transform infrared spectroscopy (FTIR) confirmed the interaction of the extracts and the alginate/carboxyl methylcellulose carrier. In vitro drug release kinetics of allicin and phyllanthin from the nanosystems exhibited a retarded release under different biological pH conditions. The antimicrobial activity of the synthesized nanoformulations were tested against Escherichia coli. The results showed that the nanosystem based on Allium sativum possesses a significantly higher antimicrobial activity against the tested organisms. Therefore, the combination of AgNPs with active compounds from Allium sativum extract is a good candidate for in vivo infection treatment application.

Biomedical Evaluation of Biosynthesized Silver Nanoparticles by Jasminum Sambac (L.) Aiton Against Breast Cancer Cell Line, and Both Bacterial Strains Colonies

The biosynthesis of silver nanoparticles (AgNPs) was conducted using the Iraqi Jasminum sambac (L.) Aiton leaves having substantial bioreduction and capping properties. The aqueous extract has been characterized using FTIR to observe changes in functional groups of extract compared to extract-AgNPs. GC-MS understands the mechanism synthesis of AgNPs based on the aqueous extract of J. sambac through identification of aqueous extracted. The synthesized AgNPs were characterized using UV–Vis at 455[Formula: see text]nm, XRD broad chart owing to size of AgNPs and TEM (AgNPs average size less than 10[Formula: see text]nm). FESEM-EDX was carried out to observe the nearly spherical shape with elemental composition. DLS was appointed with hydrodynamic radius as 105.9[Formula: see text]nm and also had a good polydispersity at 0.357, and [Formula: see text]-potential at [Formula: see text]23.1. AgNPs have antibacterial gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli), cytotoxicity MTT assay against breast cancer MCF-7 cell line IC50 at 222.6[Formula: see text][Formula: see text]g/mL, genotoxicity fragmented DNA of MCF-7 by comet assay, emphasized apoptosis cells through cell cycle flow cytometry. Overall, safe, cost-effective, and scalable biogenic nano-formulation of Jasminum sambac-AgNPs possesses antibacterial and anticancer therapeutic applications.

Biogenic Synthesis of Copper-Based Nanomaterials Using Plant Extracts and Their Applications: Current and Future Directions

Plants have been used for multiple purposes over thousands of years in various applications such as traditional Chinese medicine and Ayurveda. More recently, the special properties of phytochemicals within plant extracts have spurred researchers to pursue interdisciplinary studies uniting nanotechnology and biotechnology. Plant-mediated green synthesis of nanomaterials utilises the phytochemicals in plant extracts to produce nanomaterials. Previous publications have demonstrated that diverse types of nanomaterials can be produced from extracts of numerous plant components. This review aims to cover in detail the use of plant extracts to produce copper (Cu)-based nanomaterials, along with their robust applications. The working principles of plant-mediated Cu-based nanomaterials in biomedical and environmental applications are also addressed. In addition, it discusses potential biotechnological solutions and new applications and research directions concerning plant-mediated Cu-based nanomaterials that are yet to be discovered so as to realise the full potential of the plant-mediated green synthesis of nanomaterials in industrial-scale production and wider applications. This review provides readers with comprehensive information, guidance, and future research directions concerning: (1) plant extraction, (2) plant-mediated synthesis of Cu-based nanomaterials, (3) the applications of plant-mediated Cu-based nanomaterials in biomedical and environmental remediation, and (4) future research directions in this area.

New formula of the green synthesised Au@Ag core@shell nanoparticles using propolis extract presented high antibacterial and anticancer activity

Antimicrobial alternatives such as nanoparticles are critically required to tackle bacterial infections, especially with the emerging threat of antibiotic resistance. Therefore, this study aimed to biosynthesize Au-Ag nanoparticles using propolis as a natural reducing agent and investigate their antibacterial activity against antibiotic-resistant Staphylococcus sciuri (S. sciuri), Pseudomonas aeruginosa (P. aeruginosa), and Salmonella enterica Typhimurium (S. enterica), besides demonstrating their anticancer activity in cancer cell lines. The biosynthesized Au@AgNPs were characterized using UV-Vis spectrophotometer, Transmission Electron Microscopy (TEM), Zeta potential, Dynamic Light Scattering (DLS), Fourier Transformation Infrared (FTIR), and Scanning Electron Microscopy (SEM). Moreover, the detection of antibacterial activity was assessed through disc diffusion, the Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC), time-killing curve, and detection of cell membrane integrity via SEM. As a result, the UV-Vis spectrum revealed the formation of Au@AgNPs in a single peak between 533 and 555 nm. Furthermore, FTIR analysis confirmed nanoparticles' green synthesis due to the presence of carbon functional groups. The formulated Au@AgNPs showed antibacterial activity against both Gram-positive and Gram-negative bacteria. The MIC and the MBC of P. aeruginosa and S. sciuri were 31.25 µg/mL. However, nanoparticles were more effective on S. enterica with MIC of 7.5 µg/mL and MBC of 15.6 µg/mL. Furthermore, the time-killing curve of the three model bacteria with the treatment was effective at 50 µg/mL. Besides, SEM of the tested bacteria indicated unintegrated bacterial cell membranes and damage caused by Au@AgNPs. Regarding the anticancer activity, the results indicated that the biosynthesized Au@AgNPs have a cytotoxic effect on HEPG2 cell lines. In conclusion, this research revealed that the green synthesized Au@AgNPs could be effective antibacterial agents against S. sciuri, P. aeruginosa, and S. enterica and anticancer agents against HEPG2.

Photocatalytic and antibacterial activities of green synthesized Ag doped MgO nanocomposites towards environmental sustainability

The utilization of MgO nanoparticles (NPs) for Photocatalytic and antimicrobial activities has gained lots of attention in recent years. Since silver is an expensive material, it's of interest to check that doping of very small concentration of silver will increase the pollutant degradation efficiency of composites. Here Aloe Vera plant extract was used for synthesis of MgO, Ag NPs and Ag/MgO-nanocomposites (NCs). Green synthesized NPs and NCs were confirmed by using different techniques like UV-Vis, BET, TGA, FTIR, PL, XRD (optical, functional, Thermal, Structural) EDX, TEM, SEM, XPS, EIS and EPR (morphological, elemental, photoelectrical and ROS) studies respectively. Then NPs and NCs were applied for the photocatalytic activity of methylene blue (MB), phenol and antimicrobial studies of E. coli bacteria. Ag/MgO-NCs showed 90.18% dye and 80.67% phenol degradation in 120 min which killed E. Coli pathogenic bacteria in 25 min under solar light irradiations. In disk diffusion methods, it inactivates 24 mm area of bacterial cell growth. Thus, among these green synthesized NPs and NCs, Ag/MgO-NCs exhibited enhanced photocatalytic and antimicrobial activities.

Assembly of bimetallic (Au-Ag)FON composite films at liquid/solid interfaces and their tunable optical properties

The regular structure provided by two-dimensional (2D) structural colloidal crystals is widely accepted to provide an ideal template that ensures that plasmonic bimetallic composite nanostructures are uniform. Herein, we report an effective method for fabricating bimetallic Au-Ag composite films loaded on the surfaces of 2D polystyrene@polyacrylic acid (PS@PAA) colloidal crystals. PS@PAA particles coated with uniform Ag particle layers (AgFON) were produced by a simple and effective sputtering-deposition technique, after which the galvanic replacement (GR) reaction was used to produce a bimetallic (Au-Ag)FON composite film at the liquid/solid interface in aqueous HAuCl₄. The morphology and relative contents of the bimetallic (Au-Ag)FON composite film can be regulated by changing the kinetic factors that control the GR reaction, including the concentration and pH of the HAuCl₄ solution, and the reaction time. We demonstrated that the fabricated bimetallic (Au-Ag)FON composite has localized surface plasmon resonance (LSPR) properties that can be regulated by varying the composite structure and Ag/Au composition. On the one hand, the regular 2D colloidal crystal structure provides an ideal template for preparing Au-Ag composite films, which ensures that the optical signals of plasmonic Au-Ag composite films are reproducible. On the other hand, the synergy between Ag and Au in the bimetallic alloy composite film ensures stable and tunable LSPR performance. Furthermore, the prepared 2D ordered (Au-Ag)FON Au-Ag bimetallic material is expected to be used in sensing and catalysis applications.

A Critical Review of the Antimicrobial and Antibiofilm Activities of Green-Synthesized Plant-Based Metallic Nanoparticles

Metallic nanoparticles (MNPs) produced by green synthesis using plant extracts have attracted huge interest in the scientific community due to their excellent antibacterial, antifungal and antibiofilm activities. To evaluate these pharmacological properties, several methods or protocols have been successfully developed and implemented. Although these protocols were mostly inspired by the guidelines from national and international regulatory bodies, they suffer from a glaring absence of standardization of the experimental conditions. This situation leads to a lack of reproducibility and comparability of data from different study settings. To minimize these problems, guidelines for the antimicrobial and antibiofilm evaluation of MNPs should be developed by specialists in the field. Being aware of the immensity of the workload and the efforts required to achieve this, we set out to undertake a meticulous literature review of different experimental protocols and laboratory conditions used for the antimicrobial and antibiofilm evaluation of MNPs that could be used as a basis for future guidelines. This review also brings together all the discrepancies resulting from the different experimental designs and emphasizes their impact on the biological activities as well as their interpretation. Finally, the paper proposes a general overview that requires extensive experimental investigations to set the stage for the future development of effective antimicrobial MNPs using green synthesis.

Silver and gold nanoparticles induced differential antimicrobial potential in calli cultures of Prunella vulgaris

Background

Prunella vulgaris is medicinally important plant containing high-valued chemical metabolites like Prunellin which belong to family Lamiaceae and it is also known as self-heal. In this research, calli culture were exposed to differential ratios of gold (Au) and silver (Ag) nanoparticles (1:1, 1:2, 1:3, 2:1 and 3:1) along with naphthalene acetic acid (2.0 mg NAA) to investigate its antimicrobial potential. A well diffusion method was used for antimicrobial properties.

Results

Here, two concentrations (1 and 2 mg/6 µl) of all treated calli cultures and wild plants were used against Escherichia coli, Pseudomonas aeruginosa, Salmonella typhi, Bacillus atrophaeus, Bacillus subtilis, Agrobacterium tumefaciens, Erwinia caratovora and Candida albicans. Dimethyl sulfoxide (DMSO) and antibiotics were used as negative and positive controls. Here, the calli exposed to gold (Au) nanoparticles (NPs) and 2.0 mg naphthalene acetic acid (NAA) displayed the highest activity (25.7 mm) against Salmonella typhi than other extracts, which was considered the most susceptible species, while Agrobacterium tumefaciens and Candida albicans was the most resistance species. A possible mechanism of calli induced nanoparticles was also investigated for cytoplasmic leakage.

Conclusion

From the above data it is concluded that Prunella vulgaris is medicinally important plant for the development of anti-microbial drugs using nanotechnology and applicable in various pharmaceutical research.

Nanoparticles approach to eradicate bacterial biofilm-related infections: A critical review

Biofilm represents one of the crucial factors for the emergence of multi-drug resistance bacterial infections. The high mortality, morbidity and medical device-related infections are associated with biofilm formation, which requires primarily seek alternative treatment strategies. Recently, nanotechnology has emerged as a promising method for eradicating bacterial biofilm-related infection. The efficacy of nanoparticles (NPs) against bacterial infections interest great attention, and the researches on the subject are rapidly increasing. However, the majority of studies continue to focus on the antimicrobial effects of NPs in vitro, while only a few achieved in vivo and very few registered as clinical trials. The present review aimed to organize the scattered available information regarding NPs approach to eradicate bacterial biofilm-related infections. The current review highlighted the advantages and disadvantages associated with this approach, in addition to the challenges that prevent reaching the clinical applications. It was appeared that the production of NPs either as antimicrobials or as drug carriers requires further investigations to overcome the obstacles associated with their kinetic and biocompatibility.

Novel fabrication of dual nanoparticle loaded-co-polymeric dressing for effective healing efficiency in wound care after fracture surgery

In the present study, curcumin loaded chitosan/poly ethylene glycol nanomaterial (CUR loaded CH/PEG/AgNPs) was fabricated and characterized for wound healing efficiency after fracture surgery. The interaction of functional groups and crystal nature were recorded under FTIR and XRD spectrometer and reveals that the stabilization and purity of NPs was mediated by OH/NH₂ groups in chitosan. FESEM showed the presence of spherical and well dispersed particles. The average size of the particle was 13.48 nm. The CUR loaded CH/PEG/AgNPs showed higher swelling capacity (495.6 g/g) in phosphate buffer saline compared to water (140.2 g/g). The drug loading efficiency was higher in CUR loaded CH/PEG/AgNPs compared to CH/PEG films as recorded by the absorbance peak at 460 nm corresponds to curcumin in the composite. A dose dependent cytotoxicity of CUR loaded CH/PEG/AgNPs was noticed on Vero cells. The viability of Vero cells was increased to 96.5% at 100 μg/mL. A remarkable change in Vero cells such as condensed nuclei and membrane blabbing was noticed in cells treated with CUR loaded CH/PEG/AgNPs. A greater inhibition of Staphylococcus aureus and Escherichia coli was noticed at 24 h and 48 h treated with CUR loaded CH/PEG/AgNPs. A greater healing effect by increasing the wound contraction (98% on day 12) was observed with CUR loaded CH/PEG/AgNPs compared to control. Histopathological examination demonstrated that CUR loaded CH/PEG/AgNPs showed complete tissue regeneration in wound excised rats. The results of this study conclude that CUR loaded CH/PEG/AgNPs could be promising candidate to prevent microbial infections in wound, healing wound rapidly and inhibit the proliferation of apoptotic cells. Thus, CUR loaded CH/PEG/AgNPs could be a potential therapeutic agent with broad spectrum applications in the future. HighlightsA new approach was used to develop curcumin-loaded chitosan/poly(ethylene glycol)/AgNPs.The CUR-loaded CH/PEG/AgNPs were confirmed to be crystals by XRD analysis.The prepared CH/PEG/AgNPs were spherical and averaged 13.48 nm in size.The growth of S. aureus and E. coli were inhibited mostly by CH/PEG/AgNPs treatment.CUR loaded CH/PEG/AgNPs showed complete tissue regeneration in wound excised mice.

Au@Ag Core@Shell Nanoparticles Synthesized with Rumex hymenosepalus as Antimicrobial Agent

In this work, we used a sequential method of synthesis for gold-silver bimetallic nanoparticles with core@shell structure (Au@AgNPs). Rumex hymenosepalus root extract (Rh), which presents high content in catechins and stilbenes, was used as reductor agent in nanoparticles synthesis. Size distribution obtained by Transmission Electron Microscopy (TEM) gives a mean diameter of 36 ± 11 nm for Au@AgNPs, 24 ± 4 nm for gold nanoparticles (AuNPs), and 13 ± 3 nm for silver nanoparticles (AgNPs). The geometrical shapes of NPs were principally quasi-spherical. The thickness of the silver shell over AuNPs is around 6 nm and covered by active biomolecules onto the surface. Nanoparticles characterization included high angle annular dark field images (HAADF) recorded with a scanning transmission electron microscope (STEM), Energy-Dispersive X-ray Spectroscopy (EDS), X-Ray Diffraction (XRD), UV-Vis Spectroscopy, Zeta Potential, and Dynamic Light Scattering (DLS). Fourier Transform Infrared Spectrometer (FTIR), and X-ray Photoelectron Spectroscopy (XPS) show that nanoparticles are stabilized by extract molecules. A growth kinetics study was performed using the Gompertz model for microorganisms exposed to nanomaterials. The results indicate that AgNPs and Au@AgNPs affect the lag phase and growth rate of Escherichia coli and Candida albicans in a dose-dependent manner, with a better response for Au@AgNPs.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

Facile and Novel Synthesis of Spiky Gold Nanoparticles as an Efficient Antimicrobial Agent against Pseudomonas Aeruginosa

AIMS

The study aims to develop advanced antibacterial agents as nanoparticles instead of antibiotics due to the emergence of antimicrobial resistance.

BACKGROUND

Pseudomonas aeruginosa is capable of causing many diseases, including severe bacterial pneumonia. There is a need for an efficient antibacterial agent to kill these pathogens.

OBJECTIVE

The objective of the study is to synthesize advanced antibacterial agents as nanoparticles for biomedical applications that can play a vital role in killing Gram-negative bacteria (Pseudomonas aeruginosa).

METHOD

A novel fabricated growth of hydrophilic spiky gold nanoparticles (SGNPs) via reduction method is reported.

RESULTS

The surface plasmon resonance peak of the synthesized SGNPs was tuned under the near-infrared range. The SGNPs have anisotropic and spiky morphology with 68 nm size and -58 mV surface charge. They are pure, possessing adsorption similar to the organic material. Pseudomonas aeruginosa treated with synthesized SGNPs showed 60% bacterial death at the concentration of 100 μM.

CONCLUSION

This work consists of the novel synthesis of SGNPs via a safe and simple reduction method. The synthesized SGNPs exhibit strong antibacterial activity against the Gram-negative bacteria Pseudomonas aeruginosa measured using a microplate assay test. The result showed that these SGNPs are ideal for biomedical applications.

Advances and challenges in metallic nanomaterial synthesis and antibacterial applications

Multi-drug resistant bacterial infection has become one of the most serious threats to global public health. The preparation and application of new antibacterial materials are of great significance for solving the infection problem of bacteria, especially multi-drug resistant bacteria. The exceptional antibacterial effects of metal nanoparticles based on their unique physical and chemical properties make such systems ideal for application as antibacterial drug carriers or self-modified therapeutic agents both in vitro and in vivo. Metal nanoparticles also have admirable clinical application prospects due to their broad antibacterial spectrum, various antibacterial mechanisms and excellent biocompatibility. Nevertheless, the in vivo structural stability, long-term safety and cytotoxicity of the surface modification of metal nanoparticles have yet to be further explored and improved in subsequent studies. Herein, we summarized the research progress concerning the mechanism of metal nanomaterials in terms of antibacterial activity together with the preparation of metal nanostructures. Based on these observations, we also give a brief discussion on the current problems and future developments of metal nanoparticles for antibacterial applications.

Biogenic synthesis of bimetallic nanoparticles and their applications

The current advancements in nanotechnology suggest a sustainable development in the green synthesis of bimetallic nanoparticles (BMNPs) through green approaches. Though challenging, nano phyto technology has versatile methods to achieve desired unique properties like optic, electronic, magnetic, therapeutic, and catalytic efficiencies. Bio-inspired, facile synthesis of bifunctional BMNPs is possible using abundant, readily available natural plant sources, bio-mass wastes and microorganisms. Synergistic effects of two different metals on mixing, bring new insight for the vast applications, which is not achievable in using monometallic NPs. By adopting bio-inspired greener approaches for synthesizing NPs, the risk of environmental toxicity caused by conventional physicochemical methods become negligible. This article hopes to provide the significance of cost-effective, one-step, eco-friendly and facile synthesis of noble/transition bimetallic NPs. This review article endows an overview of the bio-mediated synthesis of bimetallic NPs, classifications of BMNPs, current characterization techniques, possible mechanistic aspects for reducing metal ions, and the stability of formed NPs and bio-medical/industrial applications of fabricated NPs. The review also highlights the prospective future direction to improve reliability, reproducibility of biosynthesis methods, its actual mechanism in research works and extensive application of biogenic bimetallic NPs.

Phytogenic Fabrication of Ag-Fe Bimetallic Nanoparticles for Cell Cycle Arrest and Apoptosis Signaling Pathways in Candida auris by Generating Oxidative Stress

Novel green synthetic nanomedicines have been recognized as alternative therapies with the potential to be antifungal agents. Apoptosis induction, cell cycle arrest and activation of the antioxidant defense system in fungal cells have also gained attention as emerging drug targets. In this study, a facile and biodegradable synthetic route was developed to prepare Ag-Fe bimetallic nanoparticles using aqueous extract of Beta vulgaris L. Surface plasmon resonance of Beta vulgaris-assisted AgNPs nanoparticles was not observed in the UV-visible region of Ag-Fe bimetallic NPs, which confirms the formation of Ag-Fe nanoparticles. Beta vulgaris-assisted Ag-Fe NPs were characterized by FTIR spectroscopy, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction and TGA-DTG analysis for their structural and morphological properties. The as-prepared Ag-Fe NPs were well dispersed and spherical with the average particle size of 15 nm. The antifungal activity of these Ag-Fe NPs against clinical isolates of Candida auris was determined by broth microdilution and cell viability assays. For insights into mechanisms, induction of apoptosis and triggering cell cycle arrest were studied following standard protocols. Furthermore, analysis of antioxidant defense enzymes was determined spectrophotometrically. Antifungal susceptibility results revealed high antifungal activity with MIC values ranging from 0.19 to 0.39 µg/mL. Further studies showed that Ag-Fe NPs were able to induce apoptosis, cell cycle arrest in G2/M phase and disturbances in primary and secondary antioxidant enzymes. This study presents the potential of Ag-Fe NPs to inhibit and potentially eradicate C. auris by inducing apoptosis, cell cycle arrest and increased levels of oxidative stress.

Single-step green route synthesis of Au/Ag bimetallic nanoparticles using clove buds extract: Enhancement in antioxidant bio-efficacy and catalytic activity

In present work, we demonstrate a single step environmentally benign approach to synthesize Au/Ag bimetallic nanoparticles (BMNPs) using aqueous extract of Clove buds for the first time. Clove bud's (CB) extract has proficiency to act as a reducing and stabilizing agent for the formation of Au/Ag BMNPs. In presence of extract, Au^III and Ag^I are reduced competitively within same solution and produce Au/Ag alloy NPs. The kinetics besides the formation of NPs was studied using UV-visible spectroscopy and efficiency of the extract was monitored by varying contact time, temperature, pH and extract concentration. The electron microscopic studies revealed the presence of NPs with peculiar morphology at alkaline pH. Further, the existence of Au and Ag atoms was investigated using energy dispersive X-ray (EDX), X-ray diffraction (XRD) and cyclic voltammetry (CV) techniques. Fourier transform infrared spectroscopy (FTIR) showed that Eugenol in the extract is mainly responsible for the production of NPs which are also surrounded by various phytochemicals. Zeta potential of all the NPs is found to be negative which prevents their agglomeration due to inter-repulsion and the biosynthesized Au/Ag BMNPs revealed greater catalytic efficiency for the degradation of methyl orange (MO), methylene blue (MB) and reduction of p-nitrophenol (p-NP). Significant enhancement induced by BMNPs compared to individual monometallic nanoparticles (MMNPs) was assigned to the synergistic effect of MMNPs and coating of phytochemicals present in the CB extract.

Green synthesis of silver nanoparticles from Curcuma longa L. and coating on the cotton fabrics for antimicrobial applications and wound healing activity

The cotton fabrics are a cosmopolitan in usage due to their extraordinary features. The clothes are a very good medium for the growth of pathogenic microorganisms. The nanoparticles have diverse benefits in the biomedical field like drug carrier and as antimicrobials. The current investigation was aimed to synthesize the metallic silver nanoparticles (AgNPs) from the aqueous extract of Curcuma longa leaf and evaluating their antimicrobial and wound healing potential of AgNPs coated cotton fabric. The synthesized AgNPs were characterized by HR-TEM and FT-IR examinations. The formulated AgNPs were coated with cotton fabrics to test their efficiency against the pathogenic microorganisms. The existence of AgNPs in the cotton fabrics was confirmed via the SEM along with EDX analysis. The antimicrobial potential of fabricated AgNPs and its coated cotton fabrics was inspected against the human pathogenic strains. The wound healing efficacy was examined in the L929 cells. The HR-TEM analysis proved the existence of spherical shaped AgNPs. In the antimicrobial activity, the CL-AgNPs loaded cotton fabric was exhibited an appreciable decrease in the growth of pathogenic microorganisms. The crude extract, as well as formulated AgNPs, also exhibited the noticeable antimicrobial potency against the S.aureus, P.aeruginosa, S.pyogenes, and C.albicans. The AgNPs loaded cotton fabrics was displayed the potent wound healing activity in the fibroblast (L929) cells. Consequently, it was concluded that the formulated AgNPs from C.longa coated cotton fabrics may be utilized for the variety of applications in hospital patients and even medical workers to prevent the microbial infection.

Green Synthesis of Biogenic Silver Nanoparticles for Efficient Catalytic Removal of Harmful Organic Dyes

The present article reports an environmentally benign method for synthesizing silver nanoparticles using the fruit extract of Viburnum opulus L. as a source of bioactive compounds, which can act as reducing agents of the silver ions and also as stabilizing agents of the obtained nanoparticles. The catalytic ability of the synthesized silver nanoparticles (AgNPs) to remove toxic organic dyes was also evaluated. The biosynthesis of silver nanoparticles was firstly confirmed by UV-Vis spectral analysis, which revealed the presence of the characteristic absorption peak at 415 nm corresponding to the surface plasmon vibration of colloidal silver. Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) studies were conducted to confirm the presence of bioactive phytocompounds, especially phenolics, as capping and stabilizing agents of the AgNPs. The size, morphology and crystalline nature of the synthesized AgNPs were investigated by transmission electron microscopy and X-ray diffraction techniques revealing that the obtained nanoparticles were spherical shaped, with an average diameter of 16 nm, monodispersed, face centered cubic nanoparticles. Further, the catalytic ability in the degradation of tartrazine, carmoisine and brilliant blue FCF dyes by NaBH4 was evaluated. The results demonstrated an efficient activity against all the investigated dyes being an outstanding catalyst for the degradation of brilliant blue FCF. This eco-friendly synthetic approach can generate new tools useful in environmental pollution control.