Visible light photo-degradation of methylene blue over Fe or Cu promoted ZnO nanoparticles

Photocatalytic degradation of methylene blue dye by ZnO nanoparticle thin films, using Sol-gel technique and UV laser irradiation

The focus of the current work is the study of the effect of the photo-catalytic activity of ZnO nanoparticles. The photocatalytic destruction of methylene blue dye, a common water contaminant, was used to assess the photocatalytic efficiency of the ZnO nanoparticles from its aqueous solution by using ZnO nanoparticles thin film under UV light and laser irradiation. Sol-gel methods prepared ZnO nanoparticle thin films. X-ray diffraction and a field-emitted scanning electron microscope were utilized to examine the structure of the produced ZnO nanoparticles. An extended characterization by laser-based fluorescence and UV-visible spectroscopic techniques. The effects of operational parameters such as photo-catalyst load and contact time on photocatalytic degradation of methylene blue were investigated. The recent study's findings showed that irradiation with a UV laser increases with power density 25 µW/cm2, the photo-catalytic rate. The UV spectra show decay for the band at 664nm decreased and the concentration of M.B. in monomer form decayed to 26% of the original concentration in 24 h, while the band at 612 which is related to the dimer M.B. molecules was not affected. The laser irradiation did the same for monomer M.B. molecules in only 3 h, while the dimer decreased to 28% of its original concentration. The reaction mechanism has been discussed by molecular modelling. Quantum mechanical calculations at B3LYP/6-311g(d,p) level indicated that methylene blue changed from dimers to monomers in the existence of ZnO. The current results present a method for degrading M.B. not only in wastewater but also in the industrial waste scale.

Synthesis of cerium, zirconium, and copper doped zinc oxide nanoparticles as potential biomaterials for tissue engineering applications

A novel eco-friendly high throughput continuous hydrothermal flow system was used to synthesise phase pure ZnO and doped ZnO in order to explore their properties for tissue engineering applications. Cerium, zirconium, and copper were introduced as dopants during flow synthesis of ZnO nanoparticles, Zirconium doped ZnO were successfully synthesised, however secondary phases of CeO and CuO were detected in X-ray diffraction (XRD). The nanoparticles were characterised using X-ray diffraction, Brunauer-Emmett-Teller (BET), Dynamic Light scattering Measurements, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and RAMAN spectroscopy was used to evaluate physical, chemical, and structural properties. The change in BET surface area was also significant, the surface area increased from 11.35 (ZnO_2) to 26.18 (ZrZnO_5). However. In case of CeZnO_5 and CuZnO_5 was not significant 13.68 (CeZnO_5) and 12.16 (CuZnO_5) respectively. Cell metabolic activity analysis using osteoblast-like cells (MG63) and human embryonic derived mesenchymal stem cells (hES-MP) demonstrated that doped ZnO nanoparticles supported higher cell metabolic activity compared to cells grown in standard media with no nanoparticles added, or pure zinc oxide nanoparticles. The ZrZnO_5 demonstrated the highest cell metabolic activity and non-cytotoxicity over the duration of 28 days as compared to un doped or Ce or Cu incorporated nanoparticles. The current data suggests that Zirconium doping positively enhances the properties of ZnO nanoparticles by increasing the surface area and cell proliferation. Therefore, are potential additives within biomaterials or for tissue engineering applications.

Photocatalytic activity of TiO2-ZnO/g-C3N4 nanocomposites for methylene orange and Rhodamine B dyes removal from water and photocatalytic hydrogen generation

In this work, for the removal of azo dyes that cause environmental pollution, TiO2-ZnO has been modified with graphitic carbon nitride (g-C3N4) to form an advanced hetero-linked photocatalyst. With this catalyst, photocatalytic hydrogen production and photodegradation activity against methylene orange (MO) and rhodamineB (RhB) dye removal were studied. The synthesized nanostructure was extensively characterized by several techniques such as XRD, TEM, UV-Vis and fluorescence spectrophotometer (PL) techniques. According to the analysis, a significant increase in the photocatalytic efficiency of TiO2-ZnO was determined after it was modified with g-C3N4 nanostructures. The combination between TiO2-ZnO and g-C3N4 was shown to be responsible for the improvement in photocatalytic activity because it significantly decreased electron-hole recombination. After 90 min the 62.81% of MO dye was removed but at 120 min only 57% of RhB was degraded. In addition, the antibacterial activity of TiO2-ZnO/g-C3N4 catalyst was carried out against gram positive and gram negatif bacteria. The bacterial inhibition (%) of TiO2-ZnO/g-C3N4 catalyst.was found to be 44 % against E. coli and 33 % against at 100 μg/ml concentration. In line with the analyzes obtained with this study, important results have been revealed for the application of photocatalytic methods in more industrial dimensions in the production of hydrogen, which is a valuable energy type.

Enhanced photocatalytic performance of auto-combusted nanoparticles for photocatalytic degradation of azo dye under sunlight illumination and hydrogen fuel production

In this study, an innovative nanomaterial was synthesized for hydrogen production from methanolysis on sodium borohydride (NaBH₄) in order to be a solution for future energy problems. The nanocomposite containing FeCo, which does not contain noble metals, and whose support material is Polyvinylpyrrolidone (PVP), was synthesized by means of a thermal method. TEM, XRD and FTIR characterization methods were used for the analysis of the morphological and chemical structure of the nanocomposite. Nanocomposite particle size was 2.59 nm according to XRD and 5.45 nm according to TEM analysis for scale of 50 nm. For catalytic properties of nanomaterial in the methanolysis reaction of NaBH₄, temperature, catalyst, substrate, and reusability experiments were carried out and kinetic calculations were obtained. Among the activation parameters of FeCo@PVP nanoparticles, turnover frequency, enthalpy, entropy and activation energy were calculated as 3858.9 min^-1, 29.39 kJ/mol, -139.7 J/mol.K, and 31.93 kJ/mol, respectively. As a result of the reusability test of the obtained FeCo@PVP nanoparticles catalysts, which was carried out for 4 cycles, the catalytic activity was 77%. Catalytic activity results are given in comparison with the literature. In addition, the photocatalytic activity of FeCo@PVP NPs was evaluated against MB azo dye under solar light irradiation for 75 min and was found to be as 94%.

Insights into the mechanism of persulfate activation with carbonated waste metal adsorbed resin for the degradation of 2,4-dichlorophenol

Superabsorbent resin (SAR) saturated with heavy metals poses a threat to surrounding ecosystem. To promote the reutilization of waste, resins adsorbed by Fe²⁺ and Cu²⁺ were carbonized and used as catalysts (Fe@C/Cu@C) to activate persulfate (PS) for 2,4-dichlorophenol (2,4-DCP) degradation. The heterogeneous catalytic reaction was mainly responsible for 2,4-DCP removal. The synergistic effect of Fe@C and Cu@C was propitious to 2,4-DCP degradation. Fe@C/Cu@C with a ratio of 2:1 showed the highest performance of 2,4-DCP removal. 40 mg/L 2,4-DCP was completely removed within 90 min under reaction conditions of 5 mM PS, pH = 7.0 and T = 25 °C. The cooperation of Fe@C and Cu@C facilitated the redox cycling of Fe and Cu species to supply accessible PS activation sites, enhancing ROS generation for 2,4-DCP degradation. Carbon skeleton enhanced 2,4-DCP removal via radical/nonradical oxidation pathways and via its adsorption to 2,4-DCP. SO₄˙-, HO˙ and O₂^•- were the dominate radical species involved in 2,4-DCP destruction. Meanwhile, the possible pathways of 2,4-DCP degradation were proposed based on GC-MS. Finally, recycling tests proved catalysts exhibited recyclable stability. Aiming to resource utilization, Fe@C/Cu@C with satisfactory catalysis and stability, is promising catalyst for contaminated water treatment.

The MIL100(Fe)/BaTi0.85Zr0.15O3 nanocomposite with the photocatalytic capability for study of tetracycline photodegradation kinetics

The visible light-active nanocomposite with the photocatalytic capability was facile one-pot solvothermal method successfully synthesized. X-ray diffraction (XRD), Thermogravimetry and Derivative Thermogravimetry (TG-DTG), Scanning Electron Microscopy with Energy Dispersive X-ray Analysis (SEM-EDX), Diffuse Reflectance Spectroscopy (UV-Vis DRS), and Fourier Transform Infra-Red (FT-IR) analysis were employed to characterize the synthetized BaTi_0.85Zr_0.15O3, MIL-100(Fe), and the MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ samples. As a result of the Scherrer equations, the size of grains for MIL-100(Fe), BaTi_0.85Zr_0.15O₃, and MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ was estimated to be 40.81, 12.00, and 22.70 nm, respectively. MIL-100(Fe), BaTi_0.85Zr_0.15O₃, and MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ samples showed bandgap values of 1.77, 3.02, and 2.56 determined from their absorption edge wavelengths. In the photodegraded solutions, chemical oxygen demand (COD) data and tetracycline (TC) absorbencies were used to obtain the rate constants of 0.032 min^-1 and 0.030 min^-1, respectively. This corresponds to t_1/2-values of 27.7 min and 21.7 min, respectively, for the degradation and mineralization of TC molecules during photodegradation process.

Undoped and Fe-Doped Anatase/Brookite TiO2 Mixed Phases, Obtained by a Simple Template-Free Synthesis Method: Physico-Chemical Characterization and Photocatalytic Activity towards Simazine Degradation

For the first time, Fe-doping (0.05, 1.0, and 2.5 wt.% Fe) was performed on a high-surface-area anatase/brookite TiO2 by adopting a simple template-free sol-gel synthesis followed by calcination at a mild temperature. The powders’ textural and surface properties were characterized by following a multi-technique approach. XRD analysis showed that the anatase/brookite ratio slightly varied in the Fe-doped TiO2 (from 76.9/23.1 to 79.3/22.7); Fe doping noticeably affected the cell volume of the brookite phase, which decreased, likely due to Fe3+ ions occupying interstitial positions, and retarded the crystallite growth. N2 sorption at −196 °C showed the occurrence of samples with disordered interparticle mesopores, with an increase in the specific surface area from 236 m2 g−1 (undoped TiO2) to 263 m2 g−1 (2.5 wt.% Fe). Diffuse Reflectance UV-Vis spectroscopy showed a progressive decrease in the bandgap energy from 3.10 eV (undoped TiO2) to 2.85 eV (2.5 wt.% Fe). XPS analysis showed the presence of some surface Fe species only at 2.5 wt.% Fe, and accordingly, the ζ-potential measurements showed small changes in the pH at the isoelectric point. The photocatalytic degradation of simazine (a persistent water contaminant) both under UV and simulated solar light was performed as a probe reaction. Under UV light, Fe-doping improved simazine degradation in the sample at 0.05 wt.% Fe, capable of degrading ca. 77% simazine. Interestingly, the undoped TiO2 was also active both under UV and 1 SUN. This is likely due to the occurrence of anatase/brookite heterojunctions, which help stabilize the photogenerated electrons/holes.

Au Nanoparticles (NPs) Decorated Co Doped ZnO Semiconductor (Co400-ZnO/Au) Nanocomposites for Novel SERS Substrates

Au nanoparticles were decorated on the surface of Co-doped ZnO with a certain ratio of Co²⁺/Co³⁺ to obtain a novel semiconductor-metal composite. The optimal substrate, designated as Co₄₀₀-ZnO/Au, is beneficial to the promotion of separation efficiency of electron and hole in a semiconductor excited under visible laser exposure, which the enhances localized surface plasmon resonance (LSPR) of the Au nanoparticles. As an interesting finding, during Co doping, quantum dots of ZnO are generated, which strengthen the strong semiconductor metal interaction (SSSMI) effect. Eventually, the synergistic effect effectively advances the surface enhancement Raman scattering (SERS) performance of Co₄₀₀-ZnO/Au composite. The enhancement mechanism is addressed in-depth by morphologic characterization, UV-visible, X-ray diffraction, photoluminescence, X-ray photoelectron spectroscopy, density functional theory, and finite difference time domain (FDTD) simulations. By using Co₄₀₀-ZnO/Au, SERS detection of Rhodamine 6G presents a limit of detection (LOD) of 1 × 10^-9 M. As a real application, the Co₄₀₀-ZnO/Au-based SERS method is utilized to inspect tyramine in beer and the detectable concentration of 1 × 10^-8 M is achieved. In this work, the doping strategy is expected to realize a quantum effect, triggering a SSSMI effect for developing promising SERS substrates in future.

Effect of Cu Doping on ZnO Nanoparticles as a Photocatalyst for the Removal of Organic Wastewater

Environmental problems with chemical and biological water pollution have become a major concern for society. Providing people with safe and affordable water is a grand challenge of the 21st century. The study investigates the photocatalytic degradation capabilities of hydrothermally prepared pure and Cu-doped ZnO nanoparticles (NPs) for the elimination of dye pollutants. A simple, cost-effective hydrothermal process is employed to synthesize the Cu-doped ZnO NPs. The photocatalytic dye degradation activity of the synthesized Cu-doped ZnO NPs is tested by using methylene blue (MB) dye. In addition, the parameters that affect photodegradation efficiency, such as catalyst concentration, starting potential of hydrogen (pH), and dye concentration, were also assessed. The dye degradation is found to be directly proportional to the irradiation time, as 94% of the MB dye is degraded in 2 hrs. Similarly, the dye degradation shows an inverse relation to the MB dye concentration, as the degradation reduced from 94% to 20% when the MB concentration increases from 5 ppm to 80 ppm. The synthesized cost-effective and environmentally friendly Cu-doped ZnO NPs exhibit improved photocatalytic activity against MB dye and can therefore be employed in wastewater treatment materials.

Phyto-mediated synthesis of nanoparticles and their applications on hydrogen generation on NaBH4, biological activities and photodegradation on azo dyes: Development of machine learning model

This work reports the synthesis of the silver-platinum bimetallic nanoparticles (N@Pt-Ag BNPs) reduced by an ethanolic extract of black seed (Nigella sativa, N) using the green synthesis method, these nanoparticles show a great antibacterial, anticancer, and catalytic activity. The characterization of physicochemical properties of Ag-Pt BNP was carried out using UV-visible spectroscopy (Uv-vis), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and Transmission electron microscope (TEM) analysis. The structural morphology shows that the N@Pt-Ag BNPs are spherical particles with a diameter of 5.6 nm. The cytotoxic effects of N@Pt-Ag BNPs were examined by MTT test in human breast cancer, human colon cancer, human pancreatic cancer, L929-Murine fibroblast cells. N@Pt-Ag BNPs have been observed to be much more effective in breast cancer cell lines. The cytotoxic effect of N@Pt-Ag BNPs against healthy L929-murine fibroblast cell lines was not observed. Also, high antibacterial activity on each of the bacteria Escherichia coli (E. coli), Bacillus subtilis (B. subtilis), Methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus aureus (S. aureus), where we note that most strains of E. coli and S. aureus were damaged with a 73% percentage, 67% bacterial inhibition respectively. The results of the catalytic activities of N@Pt-Ag BNPs were obtained by performing the hydrolysis experiments of sodium borohydride (NaBH₄). According to the results obtained, TOF, enthalpy, entropy, and activation energy, values were found to be 2497.14 h^-1, 13.52 kJ/mol, -137.47 J/mol.K, 16.02 kJ/mol, respectively. N@Pt-Ag BNPs were found to be highly effective catalysts for hydrogen production which this was also confirmed by the machine learning model. The photocatalytic activity of N@Pt-Ag BNPs was tested against methylene blue (MB) dye and the highest activity was found as 80%.

Sunlight-driven enhanced photocatalytic activity of bandgap narrowing Sn-doped ZnO nanoparticles

In this paper, we grab to utilize one of the trending techniques with efficient implications in wastewater treatment of organic pollutants, the photocatalytic degradation method shining out in the research field. Herein, tin (Sn)-doped zinc oxide (ZnO) nanoparticles (NPs) (Sn/ZnO) with different doping concentrations (1, 2, 3, 4, and 5 wt%) were synthesized via a simple co-precipitation assisted method and later subjected for their physico-chemical, morphological, and optical characterization. In addition, photocatalytic activity as the concerned study was investigated as to record the different doping levels of Sn/ZnO to examine the effect of doping concentration in relation with the degradation efficiency. We know that the optical bandgap of pure ZnO was 3.26 eV while it tends to increase slightly upon increasing the doping concentration. In the present investigation, methylene blue (MB) dye was used as a model pollutant to evaluate the photocatalytic activity of Sn/ZnO photocatalysts under natural sunlight. Varied doping concentrations of Sn/ZnO were compared with different characterization techniques while XRD analysis shows up 4-Sn/ZnO with sharp peak at (1 0 1) plane with smaller grain size in comparison to other Sn/ZnO samples. The morphological recognition depicts the hexagonal structure with smaller size for 4-Sn/ZnO which offers more active sites with improved photocatalytic activity, higher surface area for the transportation of pollutants. Fluorescence spectra results revealed that Sn dopant suppresses the charge carrier recombination. The lower intensity of PL indicated reduced recombination rate, which resulted in enhancing the photocatalytic activity. To investigate the possible mechanism, kinetics and reusability studies were performed. The 4% Sn-doped ZnO nanoparticle concentration showed highest photocatalytic activity when compared with other doping levels.

Nb2O5 supported in mixed oxides catalyzed mineralization process of methylene blue

Heterogeneous photocatalysis has become a significant green technology for water treatment. The application of Nb₂O₅ catalyst for the photodegradation of contaminants has merged as an important tool to this process. Furthermore, it is known that catalytic phases supported on metal oxides are an alternative method for enhancing its activity. In this work, supported Nb₂O₅ on mixed oxides as catalyst was applied to degrade methylene blue dye, leading to almost 100% of dye degradation without the need of any additives, after only three hours of sunlight exposure. The effect of catalyst concentration, exposure time and light source were investigated. The best catalyst activity was found at 1.5 g L^-1 and for higher catalyst concentrations the degradation was kept constant. Plausible intermediates of this degradation process were observed and characterized by NMR, LC/MS and CZE techniques. After degradation, the catalyst was recovered and could be further re-applied in other three reaction cycles without significant loss of catalytic activity.

Additive-Free Rice Starch-Assisted Synthesis of Spherical Nanostructured Hematite for Degradation of Dye Contaminant

Nanostructured hematite materials for advanced applications are conventionally prepared with the presence of additives, tainting its purity with remnants of copolymer surfactants, active chelating molecules, stabilizing agents, or co-precipitating salts. Thus, preparing nanostructured hematite via additive-free and green synthesis methods remains a huge hurdle. This study presents an environmentally friendly and facile synthesis of spherical nanostructured hematite (Sp-HNP) using rice starch-assisted synthesis. The physicochemical properties of the Sp-HNP were investigated by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (DR UV-Vis), and nitrogen adsorption–desorption analysis. The Sp-HNP showed a well-crystallized structure of pure rhombohedral phase, having a spherical-shaped morphology from 24 to 48 nm, and a surface area of 20.04 m²/g. Moreover, the Sp-HNP exhibited enhanced photocatalytic degradation of methylene blue dye, owing to the large surface-to-volume ratio. The current work has provided a sustainable synthesis route to produce spherical nanostructured hematite without the use of any hazardous agents or toxic additives, in agreement with the principles of green chemistry for the degradation of dye contaminant.

The influence of untreated sugarcane bagasse ash on the microstructural and mechanical properties of mortars

This study investigated the effects of the addition of untreated sugarcane bagasse ash (UtSCBA) on the microstructural and mechanical properties of mortars. The SCBA was sieved for only five minutes through a No. 200 ASTM mesh, and fully characterized by chemical composition analysis, laser ray diffraction, the physical absorption of gas, scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. Mortar mixtures with 0, 10 and 20% UtSCBA as cement replacement and a constant 0.63 water/cementitious material ratio were prepared. Fresh properties of the mortars were obtained. The microstructural characteristics of the mortars at 1, 7, 28, 90 and 600 days were evaluated by SEM and XRD. The compressive strengths of the mortars at the same ages were then obtained. The results show that the addition of 10 and 20% UtSCBA caused a slight decrease in workability of the mortars but improved their microstructure, increasing the long-term compressive strength.

Sonochemical-assisted synthesis of CuO/Cu2O/Cu nanoparticles as efficient photocatalyst for simultaneous degradation of pollutant dyes in rotating packed bed reactor: LED illumination and central composite design optimization

CuO/CuO₂/Cu nanoparticles were prepared by sonochemical combined thermal synthesis method and used as new photocatalyst for simultaneous photocatalytic degradation of safranin O (SO) and methylene blue (MB) dyes in rotating packed bed reactor equipped to blue light emitting diode (LED). The physicochemical properties of the synthesized CuO/Cu₂O/Cu nanoparticles were investigated by XRD, SEM and DRS analysis. The band-gap of the prepared CuO/Cu₂O/Cu-NPs was estimated to be about 1.42eV which is appropriate for photodegradation process under blue light irradiation. In rotating packed bed reactors, two key parameters are very important, one high centrifugal field and other porous media, which intensify mass transfer operation leads to photodegradation improvement. The maximum photodegradation efficiency was obtained at pH of 6 and subsequently the effects of CuO/Cu₂O/Cu-NPs dosage, rotational speed, initial dyes concentration, flow rate and reaction time were studied by central composite design (CCD) and optimized values were found to be 0.3g/L, 900rpm, 10mg/L of both dyes, 0.3L/min and 90min, respectively. Finally, results showed that synergistic effects induced by forming Cu₂O/CuO heterojunction containing Cu-NPs co-cocatalyst greatly accelerate electron transfer and effectively retard the reduction of CuO by photo-generated electrons.

Activated electric arc furnace slag as an effective and reusable Fenton-like catalyst for the photodegradation of methylene blue and acid blue 29

In this work, an activated electric arc furnace slag (A-EAFS) was investigated as an effective Fenton catalyst for the photodegradation of methylene blue (MB) and acid blue 29 (AB29). Fourier transform infrared spectroscopy and UV-visible absorption analyses indicated that A-EAFS offers additional Fe₃O₄ because of the changes in the iron oxide phase and the favorable response to visible light. It has been found that the highest degradation efficiency can reach up to 94% for MB under optimal conditions of 1 g L^-1 of A-EAFS, 20 mM H₂O₂, and pH 3. The optimal conditions for AB29 were 0.1 g L^-1 A-EAFS, 4 mM H₂O₂, and pH 3 to reach 98% degradation efficiency. Visible light enhanced the degradation of both dyes. In addition, A-EAFS, could be easily separated magnetically, exhibited good chemical stability after seven successive photodegradation cycles.

Microstructure and photocatalytic properties of polyimide/heterostructured NiO–Fe2O3–ZnO nanocomposite films via an ion-exchange technique

An innovative photocatalytic PI/heterostructured NiO–Fe₂O₃–ZnO nanocomposite was proposed.

Integration of nickel doping with loading on graphene for enhanced adsorptive and catalytic properties of CdS nanoparticles towards visible light degradation of some antibiotics

Water dispersible, highly efficient nickel doped CdS nanoparticles anchored on graphene nanosheets as a photocatalyst for cephalexin and sulfamethoxazole photodegradation have been prepared in a facile microwave-furnace assisted method. Each one of the two modifications has played a critical role in nanocomposite functioning. Defects originated by dopant boosted the lifetime of carriers and thereupon graphene matrix transferred them to contribute effectively the photocatalytic process. Characterization results revealed the formation of monocrystalline hexagonal phase of all products and that both doping and loading on graphene have red-shifted the absorption edge of CdS towards the visible light region. Furthermore, FTIR confirmed the successful reduction of graphene oxide by the subsequent preparation steps. Adsorption isotherms revealed the role of graphene in enhancing substrate adsorption. Nevertheless, dissimilar pathways of catalytic degradation were observed on the doped composite as cephalexin oxidation was principally mediated by the hole-hydroxyl radical mechanism, sulfamethoxazole oxidation favored the superoxide radical mechanism. This composite has shown, however, a high photostability and minimized ions release of the composite.

Surface Properties and Photocatalytic Activities of the Colloidal ZnS:Mn Nanocrystals Prepared at Various pH Conditions

Water-dispersible ZnS:Mn nanocrystals (NC) were synthesized by capping the surface with mercaptoacetic acid (MAA) molecules at three different pH conditions. The obtained ZnS:Mn-MAA NC products were physically and optically characterized by corresponding spectroscopic methods. The UV-Visible absorption spectra and PL emission spectra showed broad peaks at 310 and 590 nm, respectively. The average particle sizes measured from the HR-TEM images were 5 nm, which were also supported by the Debye-Scherrer calculations using the X-ray diffraction (XRD) data. Moreover, the surface charges and the degrees of aggregation of the ZnS:Mn-MAA NCs were determined by electrophoretic and hydrodynamic light scattering methods, indicating formation of agglomerates in water with various sizes (50–440 nm) and different surface charge values accordingly the preparation conditions of the NCs (−7.59 to −24.98 mV). Finally, the relative photocatalytic activities of the ZnS:Mn-MAA NCs were evaluated by measuring the degradation rate of methylene blue (MB) molecule in a pseudo first-order reaction condition under the UV-visible light irradiation. As a result, the ZnS:Mn-MAA NC prepared at the pH 7 showed the best photo-degradation efficiency of the MB molecule with the first-order rate constant (k_obs) of 2.0 × 10⁻³·min⁻¹.