Time-resolved fluorescence sensing of pesticides chlorpyrifos, crotoxyphos and endosulfan by the luminescent Eu(III)-8-allyl-3-carboxycoumarin probe

Fabrication of Luminescent Microtiterplate Using Terbium Complex for Phenol Screening in Seawater Samples

Tb(III)-2-aminoterphthalate complex Tb2-(ATPh)3 was synthesized and characterized using FT-IR, thermal analysis and elemental analysis. Tb2(ATPh)3 microtiter plate was fabricated through embedding Tb(III) complex in polyvinyl chloride membrane and used for environmental determination of phenol in sea water samples. The calculated detection (DL), quantification (QL) limits, and binding constant (KD) were 00.63 µmol L- 1, 2.10 µmol L- 1 and 1.32 × 104 mol- 1 L, respectively. The fabricated microtiter plates exhibited high selectivity towards phenol over other hydrocarbon compounds. Furthermore, AGREE metric tool was used to assess the method's green nature as well as its practicability and applicability. These merit outcomes provide that the new method for phenol detection was environmentally benign and safe to humans. The prepared Tb2(ATPh)3 MTP was validated through using gas chromatography for monitoring phenol in Suez Bay water accurately with high precision. The obtained results encouraged using Tb2(ATPh)3 MTP for efficient, fast, selective, and direct screening of phenol in real samples.

New nano materials-based optical sensor for application in rapid detection of Fe(II) and Pd(II) ions

For the analytical determination of Fe(II) and Pd(II) concentrations, a novel optical sensor based on spectrophotometric technique was used. The optical sensor was prepared by direct immobilization of a novel synthesized chromophore, 5-amino-phenanthrolin-3 formyl salicylic acid, onto nanocellulose. Human vision can identify the color associated with Fe II ions, and spectrophotometric methods can measure it with detection and quantification limits of 0.239 and 0.796 ppb, respectively. Pd(II) detection and quantification limits were 0.318 ppb and 1.06 ppb, respectively. The effects of various parameters on the detection of Fe(II) or Pd(II) ion content were investigated and optimized. The optical phenanthroline-nanocellulose (5-Phen) sensor could be reproduced multiple times and used with a higher capacity each time. The results demonstrated that the 5-Phen sensor could measure Fe(II) in human blood serum accurately and successfully even without any pre-concentration.

Recent advances in electrochemical and optical sensing of the organophosphate chlorpyrifos: a review

Chlorpyrifos (CP) is one of the most popular organophosphorus pesticides that is commonly used in agricultural and nonagricultural environments to combat pests. However, several concerns regarding contamination due to the unmitigated use of chlorpyrifos have come up over recent years. This has popularized research on various techniques for chlorpyrifos detection. Since conventional methods do not enable smooth detection, the recent trends of chlorpyrifos detection have shifted toward electrochemical and optical sensing techniques that offer higher sensitivity and selectivity. The objective of this review is to provide a brief overview of some of the important and innovative contributions in the field of electrochemical and optical sensing of chlorpyrifos with a primary focus on the comparative advantages and shortcomings of these techniques. This review paper will help to offer better perspectives for research in organophosphorus pesticide detection in the future.

Non-biological fluorescent chemosensors for pesticides detection

The ongoing poisoning of agricultural products has pushed the security problem to become an important issue. Among them, exceeding the standard rate of pesticide residues is the main factor influencing the quality and security of agricultural products. Moreover, the abuse of pesticides has introduced a large amount of residues in soil and drinking water, which will enter the food chain to the human body, leading to neurological disorders and cancer. Therefore, great efforts have been devoted to developing fluorescent sensors for detecting pesticide in a facile, quickly, sensitive, selective, accurate manner, which exhibit greater advantages than some traditional methods. In this review, we mainly focus on summarizing the non-biological fluorescent probes for organic pesticides detection with the detection limit of micromole to nanomole, including organic functional small molecules, calixarenes and pillararenes, metal organic framework systems, and nanomaterials. Meanwhile, we described the different sensing mechanisms for pesticides detection of these mentioned fluorescent sensors, the detection limit of each pesticide, the application in detecting actual samples, as well as their respective advantages and development prospects associated with present non-biological fluorescent sensors.

Fluorescence determination of Fe(iii) in drinking water using a new fluorescence chemosensor

A new fluorescence chemosensor based on (Z)-2-(1-(3-oxo-3H-benzo[f]chromen-2-yl)ethylidene)hydrazine-1-carbothioamide (CEHC) has been developed for the determination of Fe(iii) in drinking water. The optimum conditions were acetate buffer solution with a pH 5.0. In this approach, the determination of Fe(iii) is based on static quenching of the luminescence of the probe upon increasing concentrations of Fe(iii). The CEHC sensor binds Fe(iii) in a 1 : 1 stoichiometry with a binding constant K_a = 1.30 × 10⁴ M⁻¹. CEHC responds to Fe(iii) in a way that is more sensitive, selective, and quick to turn off the fluorescence than to other heavy metal ions. Selectivity was proved against seven other metal ions (Mn(ii), Al(iii), Cu(ii), Ni(ii), Zn(ii), Pb(ii), and Cd(ii)). The calibration curve was constructed based on the Stern–Volmer equation. The linear range was 2.50–150 μM with the correlation coefficient of 0.9994, and the LOD was 0.76 μM. The method was successfully applied to determine Fe(iii) in drinking water samples, and the accuracy of the chemosensor was validated by atomic absorption spectrometry.

A new fluorescence chemosensor based on (Z)-2-(1-(3-oxo-3H-benzo[f]chromen-2-yl)ethylidene)hydrazine-1-carbothioamide (CEHC) has been developed for the determination of the fluorescence probe of Fe(iii) in drinking water.

Organic-Molecule-Based Fluorescent Chemosensor for Nerve Agents and Organophosphorus Pesticides

Organophosphorus (OP) compounds are typically a broad class of compounds that possess various uses such as insecticides, pesticides, etc. One of the most evil utilizations of these compounds is as chemical warfare agents, which pose a greater threat than biological weapons because of their ease of access. OP compounds are highly toxic compounds that cause irreversible inhibition of enzyme acetylcholinesterase, which is essential for hydrolysis of neurotransmitter acetylcholine, leading to series of neurological disorders and even death. Due to the extensive use of these organophosphorus compounds in agriculture, there is an increase in the environmental burden of these toxic chemicals, with severe environmental consequences. Hence, the rapid and sensitive, selective, real-time detection of OP compounds is very much required in terms of environmental protection, health, and survival. Several techniques have been developed over a few decades to easily detect them, but still, numerous challenges and problems remain to be solved. Major advancement has been observed in the development of sensors using the spectroscopic technique over recent years because of the advantages offered over other techniques, which we focus on in the presented review.

Recent Advances in Spectroscopy Technology for Trace Analysis of Persistent Organic Pollutants

Persistent organic pollutants (POPs) have attracted significant attention because of their bioaccumulation, persistence, and toxicity. As anthropogenic products, POPs mainly contain polychlorinated biphenyls (PCBs), organochlorine pesticides (OPs), and polycyclic aromatic hydrocarbons (PAHs), and they pose a great threat to human health and the environment. To deal with these toxic contaminants, many different kinds of strategies for sensitively detecting POPs have been developed, such as high performance liquid chromatography (HPLC), surface enhanced Raman spectroscopy (SERS), and fluorescence. This paper mainly summarized the achievements of spectroscopy technologies, which generally consist of SERS, surface plasmon resonance (SPR), and fluorescence, in the detection of low-concentration POPs in different matrices. In addition, a retrospective summary is made on several critical considerations, such as sensitivity, specificity and reproducibility of these spectroscopy technologies in practical applications. Finally, some current challenges and future outlooks for these spectroscopy technologies are provided in regards to environmental analysis.

Solvent-Triggered Reversible Phase Changes in Two Manganese-Based Metal-Organic Frameworks and Associated Sensing Events

A flexible Mn-based MOF, Mn-sdc-1, has been successfully synthesized by using the ligand 4,4'-stilbenedicarboxylic acid (H₂ sdc). Attributed to the flexibility of the framework, Mn-sdc-1 can transform into a new phase (Mn-sdc-2) with completely different structural geometry; this is induced by trace levels of H₂ O at room temperature. Reversibly, the transformation from Mn-sdc-2 to Mn-sdc-1 can be triggered by DMF upon heating beyond 100 °C. These results inspired a study of the influences of temperature and H₂ O volume in the solid-state transformation of two MOF phases and, for the first time, a phase diagram of MOFs has been depicted. This phase diagram reflects the gradual H₂ O-/temperature-dependent changes between Mn-sdc-1 and Mn-sdc-2, which is very meaningful in achieving the controllable synthesis of these two MOFs and lead to targeting the desired water-stable structure. As a result, the obtained water-stable Mn-sdc-2 can be developed as an excellent Pb²⁺ sensor in aqueous solution through the luminescence quenching effect with a limit of detection of 31.4 nm.

DNA as an environmental sensor: detection and identification of pesticide contaminants in water with fluorescent nucleobases

Environmental contaminants pose a substantial health risk in many areas of the world. One of these risks is contamination of water with toxic organic species, such as herbicides and insecticides. Here we describe the discovery and properties of a set of fluorescent chemosensors that respond to micromolar concentrations of a broad range of common organic pesticides. The chemosensors are short DNA-like oligomers with fluorophores replacing DNA bases that are assembled via a DNA synthesizer. We screened a library of 1296 tetrameric compounds on polystyrene microbeads, and identified a set of chemosensor sequences that respond strongly to a set of structurally varied pesticide analytes. We show that ten chemosensors on beads can be used to detect and identify 14 different common pesticides at 100 μM, using the pattern of fluorescence intensity and wavelength changes. Limits of detection for two analytes were as low as 2 μM. The chemosensors are shown to function successfully in a practical setting, correctly identifying unknown pesticide contaminants in water from Felt Lake, California. The results establish a simple, low cost strategy for sensing environmental spills of toxic organics.

Fluorescence enhancement effect of Eu(III)-thenoyltrifluoroacetone-cetyltrimethyl ammonium bromide in water-dissolved organic matter extracted from wheat straw

The fluorescence spectral characteristics of water-dissolved organic matter extracted from wheat straw (DOM-WS) were studied using three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy. The results indicated that 3D-EEM spectra of DOM-WS showed four different fluorophores: humic-like, visible fulvic-like, UV fulvic-like and protein-like substances. It is interesting that DOM-WS can obviously enhance the fluorescence intensity of Eu(III)-thenoyltrifluoroacetone-cetyltrimethyl ammonium bromide system. On the basis of this study, a new fluorescence method for the determination of trace amounts of Eu(III) was developed. Under the optimal conditions, the enhanced fluorescence intensity was in proportion to the concentration of Eu(III) in the range of 8.0×10(-8)-8.0×10(-7)mol/L. The detection limit (S/N=3) was 1.1×10(-9)mol/L. This method was applied to the analysis of Eu(III) concentration in standard sample and obtained satisfactory results. It may be a new way to use wheat straw effectively.