Fluorimetric detection of Sn(2+) ion in aqueous medium using Salicylaldehyde based nanoparticles and application to natural samples analysis

Azine Based Oligoesteric Chemosensors for Cu2+ Ion Detection: Synthesis, Structural Characterization, and Theoretical Investigations

Synthesized monomer and its three oligoesters were characterized by techniques such as 1H, 13C{1H}, IR, UV, GPC and applied to chemosensor applications. A series of metal ions was studied with fluorophores to evaluate the sensitivity towards Cu2+ ion. The fluorophores results exhibit the selective and sensitive "Turn off" fluorescence response with Cu2+ ion in DMF/H2O (1:1, pH: 7.4, fluorophore: 5 µM) solution. Binding stoichiometry and binding constant of fluorophores were calculated using Stern-Volmer equation and Benesi-Hildebrand plots, respectively. Structure of fluorophores were studied using DFT, B3LYP/6-311 +  + G(d,p) level basis set. Quenching mechanisms and electrical properties of fluorophores were explained with theoretical outcomes. Iodine doped and undoped oligoesters electrical conductivity were studied in solid-state and the conductivity was gradually increased with increase the contact time of iodine with oligoesters. At different frequencies and temperatures, the dielectric measurement was calculated using the two-probe method. Among all oligoesters, DMDAP exhibited high electrical conductivity and DMDMP has a higher dielectric constant value than other oligoesters.

Strong intramolecular charge-transfer effect strengthening naphthoquinone-based chemosensor: Experimental and theoretical evaluation

An aminophenol-linked naphthoquinone-based fluorometric and colorimetric chemosensor 2-chloro-3-((3-hydroxyphenyl) amino) naphthalene-1,4-dione (2CAN-Dione) was synthesized for selective detection of Sn2+ ion in aqueous solution. The amine and conversion of carbonyl into carboxyl groups play a vital role in the sensing mechanism when Sn2+ is added to 2CAN-Dione. Comprehensive characterization of the sensor was carried out using standard spectral and analytical approaches. Because of the intramolecular charge transfer (ICT) effect and the turn-on sensing mode, the strong fluorometric emission towards Sn2+ was observed at about 435 nm. The chemosensor exhibited good selectivity for Sn2+ in the presence of coexisting metal ions. An improved linear connection was established with a low limit of detection (0.167 μM). FT-IR, 1H NMR, 13C NMR, and quantum chemistry methods were performed to verify the binding coordination mechanism. The chemosensing probe 2CAN-Dione was successfully employed in bioimaging investigations, demonstrating that it is a reliable fluorescent marker for Sn2+ in human cancer cells.

1-Adamantanamine-based triazole-appended organosilanes as chromogenic “naked-eye” and fluorogenic “turn-on” sensors for the highly selective detection of Sn2+ ions

1-Adamantanamine based organosilanes 4a–d have been synthesized and possessed selectivity towards Sn2+ ions only and serve as a colorimetric/fluorimetric dual-channel probe. The turn-on fluorescence has been marked on interaction with Sn2+ ions.

Synthesis, characterization, theoretical investigations and fluorescent sensing behavior of oligomeric azine-based Fe3+Chemosensors

Three azine oligomeric esters were synthesized, characterized by IR, UV, 1H, 13C{1H} and GPC technique, and applied to chemosensor application. The sensitivity response of the oligomers towards the metal ion was evaluated for a metal ion series. The results have shown selective and sensitive “turn off” fluorescence response towards Fe3+ ion in DMF/H2O (1:1, pH: 7.4, fluorophore: 5 μM) solution. The binding stoichiometry and binding constant of the fluorophores were calculated using the Stern–Volmer equation and Benesi–Hildebrand plots, respectively. The quenching of fluorophores on the addition of Fe3+ ion indicates the capability of fluorophore towards quantitative analysis of Fe3+. The dimer of oligomers was theoretically studied using DFT, B3LYP/6-311G level basic set to support and explain the quenching mechanism of LMCT, PET process and to explain the DC, AC electrical studies results. The electrical conductivity measurements of solid-state, I2 doped and undoped oligomers were carried out and the conductivity gradually increases with increase in iodine vapor contact time of oligomers. The electrical conductivity was related with band gap and charge density values of imine nitrogen obtained by Huckel calculations. The dielectric measurements at different temperatures and frequencies were made by two probe method. Among the oligomers, EBHAP has recorded a high dielectric constant at the low applied frequency of 50 Hz at 373 K due to loosely attached π bonds resulting good polarization.

Micro flow photochemical synthesis of Ca-sensitive fluorescent sensor particles

Fluorescence probes have widely been used for detecting and imaging Ca2+-enriched parts of cells but more rarely for quantitative determination of concentrations. In this study we show how this can be achieved by a novel approach using hydrogel particles. In a microfluidic co-flow arrangement spherical droplets were generated from an aqueous solution of acrylamide, N,N'-methylenebisacrylamide crosslinker and photoinitiator and subsequently photo-cured in situ yielding gel particles in a sub millimeter range. These particles were separated, dried under reduced pressure and re-swollen in water containing Rhod-5N tri potassium salt as calcium ion selective fluorescence probe. After that the particles were dried again and stored for further investigations. Upon exposure of dried particles to calcium chloride solutions they swell and take up Ca2+-ions forming a strong fluorescing complex with Rhod-5N. Thus, fluorescence intensity increases with calcium ion concentration. Up to ca. 0.50 mM the enhancement effect is strong and then becomes considerably weaker. The intensity-concentration-dependence is well described by an equation derived from the equilibrium of the formation of a 1:1 Ca2+:Rhod-5N complex. The particles allow for a fast optical determination of Ca2+-concentrations up to 0.50 mM in analyte volumes down to below 10 μL.

Inner filter effect between upconversion nanoparticles and Fe(ii)-1,10-phenanthroline complex for the detection of Sn(ii) and ascorbic acid (AA)

Dual-function and multi-function sensors can use the same material or detection system to achieve the purpose of detection of two or more substances. Due to their high sensitivity and specificity, dual-function and multi-function sensors have potential applications in many fields. In this article, we designed a dual-function sensor to detect Sn(ii) and ascorbic acid (AA) based on the inner filter effect (IFE) between NaYF₄:Yb,Er@NaYF₄@PAA (UCNPs@PAA) and Fe(ii)–1,10-phenanthroline complex. Fe(ii)–1,10-phenanthroline complex has strong absorption in most of the ultraviolet-visible light range (350 nm–600 nm), and this absorption band overlaps with the green emission peak of UCNPs@PAA at 540 nm; Fe(ii)–1,10-phenanthroline complex can significantly quench the green light emission of UCNPs@PAA. When Sn(ii) or AA is added to the UCNPs@PAA/Fe(iii)/1,10-phenanthroline, they can reduce Fe(iii) to Fe(ii). Fe(ii) can react with 1,10-phenanthroline to form an orange complex, thereby quenching the green light emission of UCNPs@PAA. And the quenching efficiency is related to the concentration of Sn(ii) and AA; there is a linear relationship between quenching efficiency and the concentration of Sn(ii) and AA, within a certain concentration range the detection limits of this dual-function sensor for Sn(ii) and AA are 1.08 μM and 0.97 μM, respectively. In addition, the dual-function sensor can also detect Sn(ii) and AA in tap and spring water.

Based on the inner filter effect (IFE), we use UCNPs to develop a dual-function sensors, which can realize sensitive and selective detection for the Sn(ii) and ascorbic acid (AA).

Europium(III) complex fluorescent sensor for dual channel recognition of Sn2+ and Cu2+ ions in water

A new europium(III) complex Eu(tta)₃L₁ (1a) (L₁ = (2-(3,5-dimethoxyphenyl)-1H-imidazo[4,5-f][1,10]phenanthroline), tta = 2-thenoyltrifluoroacetone) has been prepared and synthesized. The structure of complex was completely determined by several different analytical techniques including single-crystal X-ray diffraction, ¹H and ¹³C NMR. The crystal structure of the complex 1a belonged to monoclinic system with the space group P2₁/n. Its fluorescent properties were systematically studied in details by adding different metal ions in deionized water. Upon addition of Sn²⁺, its fluorescence intensity was strengthened and centered at 460 nm. And when Cu²⁺ was added, its fluorescence emission intensity was quenched quickly. The LODs for Sn²⁺ and Cu²⁺ were calculated to be 4.52 × 10^-7 mol L^-1 and 1.11 × 10^-7 mol L^-1, respectively. Furthermore, this sensor was successfully employed to monitor Sn²⁺ and Cu²⁺ in practical samples.

Design, synthesis and photophysical aspects of 1,2,3-triazole appended Schiff base functionalized silanes and silatranes

This article represents the synthesis of 1,2,3 triazoles allied Schiff base functionalized silanes and silatranes. The silane 5a and silatrane 6a were investigated for their photophysical potential via absorption and emission spectroscopy and found selective for Sn(ii).

An ICT-based fluorescence enhancement probe for detection of Sn2+ in cancer cells

Development of a novel fluorescence enhancement probe for detection of Sn²⁺ in organisms, with high selectivity and sensitivity, is of great interest but remains a great challenge. Herein, an ICT-based fluorescence probe TPPB was rationally developed to act as an ‘enhancement’ luminescent and “naked-eye” indicator for Sn²⁺ detection. Importantly, spectroscopic studies indicated that TPPB was a fluorescence enhancement sensor for Sn²⁺ with rapid response, low detection limit (0.116 μM) and excellent binding constant (1.6 × 10⁴ M⁻¹). The mechanism of TPPB response to Sn²⁺ was further proved by ¹H NMR titration, and enhancement calculations. Furthermore, TPPB is applied as a fluorescence probe for imaging in Hela cells, indicated that it can be potentially applied for Sn²⁺ sensing in biological fields.

Development of a novel fluorescence enhancement probe for detection of Sn²⁺ in organisms, with high selectivity and sensitivity, is of great interest but remains a great challenge.

Hydroxyl phenyl imino modified phenanthro[9,10-d] imidazole: An AIEE-active sensor for determination of Cu2+ in water samples and subsequent "turn-on" recognition of Cr3+ with logic gates

A 2-hydroxyl phenyl imino modified phenanthro[9,10-d]imidazole probe (PPIP) was synthesized and its aggregation-induced emission enhancement (AIEE) phenomenon in aqueous medium was characterized by the Tyndall phenomena, morphologies of scanning electron microphotograph (SEM) as well as the enhanced fluorescence intensities. The AIEE-active PPIP in aggregated states exhibited a sensitive detection for Cu²⁺ along with the elimination of fluorescence intensity; subsequently, in situPPIP-Cu²⁺ complex showed selective fluorescence "turn-on" for Cr³⁺, providing a potential platform for tandem recognition of Cu²⁺ and Cr³⁺. The 1:1 M ratio between PPIP and Cu²⁺ was confirmed by Job's plot, ¹H NMR spectra, mass spectra and density functional theory (DFT) calculations. The detection limits for Cu²⁺ and Cr³⁺ were 4.127 × 10^-2 μM and 9.404 × 10^-1 μM, respectively. Moreover, this successive recognition could be utilized to construct the molecular logic gates by the fluorescence changes. In addition, PPIP was successfully employed for quantitative detecting Cu²⁺ in real water samples with satisfactory results.

Fluorescent organic nanoparticles (FONs) as convenient probes for metal ion detection in aqueous medium

Fluorescent organic nanoparticle (FON)-based chemosensors are emerging as a valuable tool for the fast and accurate detection of metal ions in aqueous media. In this review, we highlight the recent developments in this field.

Facile fabrication of AIE/AIEE-active fluorescent nanoparticles based on barbituric for cell imaging applications

Compounds 1–4 were synthesized, and the optical properties and mechanisms were investigated. Compound 4 was applied to the cell imaging.