A chemiluminescence biosensor based on the adsorption recognition function between Fe3O4@SiO2@GO polymers and DNA for ultrasensitive detection of DNA

Sensitive colorimetric detection of heparin using reverse modulation of peroxidase- and oxidase-mimetic activities in Fe3O4@PDA@MnO2 nanocomposites

Heparin, a widely studied glycosaminoglycan, plays crucial roles in the regulation of various physiological and pathological processes. Therefore, it's important to develop highly selective and sensitive methods for convenient monitoring of heparin levels in biological systems. We report the design and synthesis of Fe3O4@PDA@MnO2 nanoparticles (FPM-NPs), which exhibit dual enzymatic activities, enabling quantitative detection of heparin. The FPM-NPs feature a unique tri-layer spherical shell structure, possessing both peroxidase-like and oxidase-like activities, and catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence or absence of H2O2. Remarkably, upon co-incubated with heparin, the oxidase activity of FPM-NPs decreases, while the peroxidase activity increases. By leveraging these dual enzymatic properties of FPM-NPs, a highly sensitive and specific colorimetric detection of heparin is achieved, with a detection limit reaching 6.51 nM and a good linear response to quantify heparin ranging 10-800 nM. Additionally, the developed FPM-NPs are successfully applied to measure heparin in fetal bovine serum samples. We also extend this detection method to a paper-based chip, enabling portable detection of heparin through grayscale analysis of mobile phone photographs. The multi-nanozyme-based heparin detection approach provides a new perspective for future research on expanding the application of nanocomposite materials in biomedical detection and analysis.

Flow Injection Chemiluminescence Determination of Ethion and Computational Investigation of the Adsorption Process on Molecularly Imprinted Polymerized High Internal Phase Emulsion

The lack of sufficient selectivity is the main limitation of chemiluminescence (CL) methods; because the CL reagent is not restricted to a specific analyte. This study investigated the preconcentration and determination of ethion by a flow injection CL (FIA-CL) method using a molecularly imprinted poly high internal phase emulsion (MIP-polyHIPE) adsorbent. Preliminary studies showed that ethion could be determined with high sensitivity in the Ru (bipy)₃ ²⁺ -acidic Ce (IV) CL system. A MIP-polyHIPE adsorbent was synthesized and used for preconcentration to increase the selectivity and sensitivity of the method. The adsorption of ethion on the adsorbent was investigated using density functional theory (DFT) and molecular dynamics (MD), UV-Vis and FTIR spectrophotometry and liquid chromatography-tandem mass spectrometry (LC-MS-MS). Response surface methodology (RSM) and central composite design (CCD) were used to find optimized concentrations of variables. The linear dynamic range (LDR) and limit of detection (LOD) for ethion in the FIA-CL method were calculated 1.0✕10^-9 -2.0✕10^-7 and 6.0✕10^-10 mol L^-1 , respectively. The percentage of relative standard deviation for 5 repetitive measurements of 5.0⨯10^-8 mol L^-1 ethion was 4.2%. The proposed method was successfully used to separate and preconcentrate ethion from drinking and surface water sources.

A molecularly imprinted polymerized high internal phase emulsion adsorbent for sensitive chemiluminescence determination of clopidogrel

A molecularly imprinted polymerized high internal phase emulsion (MIP-polyHIPE) adsorbent was used for selective separating and preconcentrating the anti-plaque drug, clopidogrel. For the first time in this study, chemiluminescence (CL) methods were evaluated for the determination of clopidogrel. The synthesis of adsorbents by the emulsion templating method showed that the sensitivity of the method can be increased up to 42 times. The determination of clopidogrel was evaluated by Ru(phen)₃²⁺-Cerium (IV), KMnO₄-H₂SO₄, KMnO₄-H₂SO₄-Na₂SO₃, and luminol-H₂O₂ CL systems. According to the results, only the Ru(phen)₃²⁺-Cerium (IV) CL system showed a reasonable sensitivity for clopidogrel. Using MIP-polyHIPE adsorbent, the linear range, the limit of detection, and relative standard deviation for clopidogrel in this system were respectively 1.0 × 10^-9-8.0 × 10^-8 mol L^-1, 3.0 × 10^-10 mol L^-1, and 6.3% (n = 4, 1.0 × 10^-8). The proposed method was employed for determining clopidogrel in pharmaceuticals and blood serum samples. The results showed the good sensitivity and accuracy of the proposed method.

Fabrication of a sensing platform for identification of tumor necrosis factor-alpha: a biomarker for neonatal sepsis

Neonatal sepsis is a prime cause of neonatal deaths across the globe. Presently, various medical tests and biodevices are available in neonatal care. These diagnosis platforms possess several limitations such as being highly expensive, time-consuming, or requiring skilled professionals for operation. These limitations can be overcome through biosensor development. This work discusses the assembling of an electrochemical sensing platform that is designed to detect the level of tumor necrosis factor-alpha (TNF-α). The sensing platform was moderated with nanomaterials molybdenum disulfide nanosheets (MoS₂NSs) and silicon dioxide-modified iron oxide nanoparticles (Fe₃O₄@SiO₂NPs). The integration of nanomaterials helps in accomplishing the improved characteristics of the biosensor in terms of conductivity, selectivity, and sensitivity. Further, the molecularly imprinted polymer (MIP) approach was incorporated for sensing the presence of TNF-α on the surface of the working electrode. The electrochemical response of the electrode was recorded at different conditions. A broad concentration range was selected to optimize the biosensor from 0.01 pM to 100 nM. The sensitivity of the biosensor was higher and it exhibits a lower detection limit (0.01 pM).

Preparation of Dual-Layered Core-Shell Fe3O4@SiO2 Nanoparticles and Their Properties of Plasmid DNA Purification

The rapid purification of biomaterials such as DNA, RNA, and antibodies has attracted extensive attention, and research interest has increased further with the COVID-19 pandemic. In particular, core–shell-structured superparamagnetic nanoparticles have been continuously studied for their application as biopurification materials. It has been reported that Fe₃O₄@SiO₂ nanoparticles are one of the most promising candidates for separating nucleic acids via a simple and rapid process. This study proposed a fabrication method for dual-layered Fe₃O₄@SiO₂ nanoparticles, in which the density of the SiO₂ shell was controlled using an intermediate surfactant during the SiO₂ coating. After the fabrication of dual-layered Fe₃O₄@SiO₂ nanoparticles, structural, morphological, and magnetic analyses were conducted. The results showed that the Fe₃O₄ nanoparticles were surrounded by a dense layer 15.6~27.9 nm thick and a porous layer 24.2~44.4 nm thick, and had superparamagnetic properties with high saturated magnetization at room temperature (86.9 emu/g). Then, the optimal conditions for the biopurification material were suggested based on analysis of the selective separation of plasmid DNA.

A "turn-on" and proximity ligation assay dependent DNA tweezer for one-step amplified fluorescent detection of DNA

A "turn-on" and proximity ligation assay dependent DNA tweezer was proposed for one-step amplified fluorescent detection of DNA. Target DNA can anneal with capture probe to form an entire long sequence. The formed long sequence can circularly open the hairpin, resulting the "turn-on" of DNA tweezers. A good linear relationship was shown from 40 pM to 20 nM with limit of detection of 10 pM. In addition, it has been successfully utilized to analysis DNA in human serum, representing a great and practical application future.

Highly sensitive detection of carcinoembryonic antigen using copper-free click chemistry on the surface of azide cofunctionalized graphene oxide

In this study, we reported a highly sensitive method for detecting carcinoembryonic antigen (CEA) based on an azide cofunctionalized graphene oxide (GO-N₃) and carbon dot (CDs) biosensor system. Carbon dots-labeled DNA (CDs-DNA) combined with GO-N₃ using copper-free click chemistry (CFCC), which quenched the fluorescence of the CDs via fluorescence resonance energy transfer (FRET). Upon the addition of CEA, fluorescence was recovered due to the combination of CEA and aptamer. Under optimal conditions, the relative fluorescence intensity was linear with CEA concentration in the range of 0.01-1 ng/mL (R² = 0.9788), and the limit of detection (LOD) was 7.32 pg/mL (S/N = 3). This biosensor had a high sensitivity and good selectivity for CEA detection in serum samples, indicating that the novel sensor platform holds a great potential for CEA and other biomarkers in practical applications.

Cerium doped magnetite nanoparticles for highly sensitive detection of metronidazole via chemiluminescence assay

Cerium doped magnetite nanoparticle (CDM) was synthesized via a co-precipitation method and used as the co-reactant of luminol-K₃Fe(CN)₆ chemiluminescent system. The physical-chemical features of CDM were studied by XPS, XRD, HRTEM, FESEM, VSM, BET, and FTIR analyses. This simple and highly sensitive nanoprobe enabled the determination of minor concentrations of metronidazole (MNZ). Owing to the quenching efficacy of MNZ in the studied chemiluminescence system, a linear range of 3.47 × 10^-6-9.37 × 10^-5 mol/L was obtained with a limit of detection of 3.91 × 10^-7 mol/L. This biosensor was used for MNZ detection in human serum samples, which was highly efficient. The outcomes of this study give credit to the proposed biosensor to be applied for detection of MNZ in biological samples.

Novel Chemiluminescence Sensor for Thrombin Detection Based on Dual-Aptamer Biorecognition and Mesoporous Silica Encapsulated with Iron Porphyrin

Thrombin is a marker of blood-related diseases, and its detection is of great significance in the fields of medical and biological research. Herein, a novel chemiluminescence (CL) sensor for thrombin detection was prepared based on dual-aptamer biorecognition and mesoporous silica encapsulated with iron porphyrin. Mesoporous silica encapsulated with hematin by aptamer1 (Apt1/hematin/M-SiO₂) and magnetic microspheres modified with aptamer2 (Apt2/NH₂-MS) were successfully prepared, and the two materials were used to construct a CL sensor to detect thrombin. Primarily, Apt2/NH₂-MS is used for pretreatment separation of thrombin samples by the biorecognition effect between the aptamer (Apt2) and target (thrombin). Then, thrombin/Apt2/NH₂-MS is again recognized with Apt1 on the surface of Apt1/hematin/M-SiO₂ and Apt1/thrombin/Apt2/NH₂-MS is formed, so dual-aptamer biorecognition is realized. Meanwhile, the generated Apt1/thrombin/Apt2/NH₂-MS makes Apt1 shed off the surface of M-SiO₂ and release hematin. The released hematin can catalyze the luminol-H₂O₂ CL reaction. Therefore, a sandwich-type CL sensor was constructed based on dual-aptamer biorecognition and hematin catalysis for the detection of thrombin. The sensor has a linear range of 7.5 × 10^-15 to 2.5 × 10^-10 mol·L^-1 and a detection limit of 2.2 × 10^-15 mol·L^-1 and also exhibits excellent selectivity, reproducibility, and stability. The sensor was successfully used for the detection of thrombin in serum samples, which makes it possible to apply the sensor in the detection of thrombin in actual samples.

A highly selective and sensitive detection of insulin with chemiluminescence biosensor based on aptamer and oligonucleotide-AuNPs functionalized nanosilica @ graphene oxide aerogel

A novel, highly selective and sensitive chemiluminescence (CL) biosensor for insulin (INS) detection was proposed based on aptamer and oligonucleotide-gold nanoparticles functionalized nanosilica @ graphene oxide aerogel. Initially, nanosilica functionalized graphene oxide aerogel (SiO₂@GOAG) was successfully prepared and the composite showed rich pore distribution, large specific surface area and good biocompatibility. Insulin aptamer (IGA3) was used as a biorecognition element and oligonucleotide functionalized gold nanoparticles (ssDNA-AuNPs) was used as CL signal amplification materials, which were functionalized on the surface of SiO₂@GOAG. The multi-functionalized composite - ssDNA-AuNPs/IGA3/SiO₂@ GOAG was obtained and used to construct the CL biosensor for insulin detection. When insulin is present in a sample, the insulin will bind to the IGA3, which will result in the release of ssDNA-AuNPs. The released ssDNA-AuNPs would catalyze the luminescence of luminol and H₂O₂. The linear range of the CL biosensor for insulin detection was 7.5 × 10^-12 to 5.0 × 10^-9 moL/L and the detection limit was 1.6 × 10^-12 moL/L (S/N = 3). The selectivity and stability of the CL biosensor were also studied and the results showed that the biosensor exhibited high selectivity and good stability due to the introduction of ssDNA-AuNPs/IGA3/SiO₂@GOAG. The CL biosensor was finally used for recombinant human insulin detection in recombinant human insulin injection and the results were satisfactory.

An ultrasensitive chemiluminescence aptasensor for thrombin detection based on iron porphyrin catalyzing luminescence desorbed from chitosan modified magnetic oxide graphene composite

In this work, an ultrasensitive chemiluminescence (CL) aptasensor was prepared for thrombin detection based on iron porphyrin catalyzing luminol - hydrogen peroxide luminescence under alkaline conditions, and iron porphyrin was desorbed from chitosan modified magnetic oxide graphene composite (CS@Fe₃O₄@GO). Firstly, CS@Fe₃O₄@GO was prepared. CS@Fe₃O₄@GO has advantages of the good biocompatibility and positively charged on its surface of CS, the large specific surface area of GO and the easy separation characteristics of Fe₃O₄. GO, Fe₃O₄ and CS@Fe₃O₄@GO were confirmed by transmission electron microscopy (TEM), scanning electron microscope (SEM), fourier transform infrared (FTIR) and X-ray powder diffraction (XRD). Then, thrombin aptamer (T-Apt) and hemin (HM, an iron porphyrin) were sequentially modified on the surface of CS@Fe₃O₄@GO to form CS@Fe₃O₄@GO@T-Apt@HM. The immobilization properties of CS@Fe₃O₄@GO to T-Apt and adsorption properties of CS@Fe₃O₄@GO@T-Apt to HM were sequentially researched through the curves of kinetics and the curves of thermodynamics. When thrombin existed in solutions, HM was desorbed from the surface of CS@Fe₃O₄@GO@T-Apt@HM owing to the strong specific recognition ability between thrombin and T-Apt, causing the changes of CL signal. Under optimized CL conditions, thrombin could be measured with the linear concentration range of 5.0×10^-15-2.5×10^-10mol/L. The detection limit was 1.5×10^-15mol/L (3δ) while the relative standard deviation (RSD) was 3.2%. Finally, the CS@Fe₃O₄@GO@T-Apt@HM-CL aptasensor was used for the determination of thrombin in practical serum samples and recoveries ranged from 95% to 103%. Those satisfactory results revealed potential application of the CS@Fe₃O₄@GO@T-Apt@HM-CL aptasensor for thrombin detection in monitoring and diagnosis of human blood diseases.