Additive-induced aggregate changes of two structurally similar dyes in aqueous solutions: A comparative photophysical study

Theoretical design of an absorption hologram-based sensor for dose quantification in daylight photodynamic therapy

Daylight photodynamic therapy (D-PDT) is an effective and almost painless treatment for many skin conditions, where successful treatment relies on daylight activation of a topical photosensitizer. Optimization of D-PDT requires accurate assessment of light dose received. There is a requirement for a small-area sensor that can be placed adjacent to the treatment site to facilitate accurate dose quantification. Here, a novel, to the best of our knowledge, configuration for a D-PDT dose sensor, consisting of a holographic absorption grating fabricated in a photosensitive film, is presented. Theoretical modeling of the sensor's response (i.e., change in grating diffraction efficiency due to change in grating absorption modulation, α₁, on exposure to daylight) was conducted using Kogelnik's coupled-wave theory. The influence of the different grating parameters (initial film absorption, thickness, spatial frequency, and reconstruction wavelength) on the sensor response was examined and revealed that the initial absorption and grating thickness values have a large impact on both the magnitude and rate of the D-PDT sensor response. The optimum design for an absorption grating-based D-PDT sensor is described.

Increased photoluminescence and photodynamic therapy efficiency of hydroxyapatite-β-cyclodextrin-methylene blue@carbon powders with the favor of hydrogen bonding effect

To meet the requirements of theranostics with diagnosis and treatment, photodynamic-based therapy is simultaneously enabled with the incorporation of methylene blue (MB) as imaging agent and photosensitizer in core-shell structured drug vehicles. Citrate-modified hydroxyapatite (HAp) powders are first grafted with β-cyclodextrin (CD), then combined with MB molecules through electrostatic interactions, and finally encapsulated with carbon shells through hydro-thermal carbonization of glucose to prepare HAp-CD-MB@C powders. Processing parameters of carbonization temperature, glucose addition, reaction time and CD addition are varied to prepare drug carriers with modulated crystallite degrees and photo-physical properties. Increased crystallite sizes of HAp are accompanied with the formation of C=O, C=C and C-OH groups in carbon shell, endowing sustainable release behaviors of MB through carbonous structures. High photoluminescence intensities are fairly related with red-shifted vibration peaks of groups in tightly combined MB molecules through hydrogen bonds. This hydrogen bonding effect is significantly increased for HAp-CD-MB@C140 with the splitting of CH₃-involved vibration peaks in infrared spectra, which causes increase in photoluminescence intensity and four-fold increase in generation ratio of singlet oxygen. The present studies shed light on preparation of core-shell structured drug carriers, modulation of aggregate states of MB molecules, enhancement of photo-physical properties and improvement of generation ratio of singlet oxygen during photodynamic-based therapy.

The vibronic absorption spectrum and electronic properties of Azure B in aqueous solution: TD-DFT/DFT study

The vibronic absorption spectrum of Azure B (AB) in an aqueous solution is calculated using the time-dependent density functional theory (TD-DFT). The results of calculations are analyzed using all hybrid functionals supported by Gaussian16, the 6-31++G(d,p) basis set, and the IEFPCM and SMD solvent models. The solvent model IEFPCM gave significantly underestimated values of λ_max in comparison with the experiment. This is a manifestation of the TD-DFT "cyanine failure". However, the SMD model made it possible to obtain good agreement between the calculation results and experimental data. The best fit was achieved using the X3LYP functional. According to our calculations, the shoulder in the visible absorption spectrum of AB has a vibronic origin. However, the calculated shoulder is weaker than the experimental one. Explicit assignment of two water molecules, which form strong hydrogen bonds with a dye molecule, leads to a shift of the calculated absorption spectrum to longer wavelengths by approximately 17 nm but does not lead to an improvement in its shape. Comparative analysis of the calculated vibronic absorption spectra of Azure B with those obtained earlier for Azure A and methylene blue showed that the presence and intensity of the short-wavelength shoulder are determined by the location of the bands of higher vibronic transitions relative to the band of the 0₀ → 0⁰ main transitions. Photoexcitation leads to an increase in the dipole moment of the dye molecule. An insignificant photoinduced electron transfer was found in the central ring of the chromophore of the dye molecule.

The photosensitiser azure A disrupts mitochondrial bioenergetics through intrinsic and photodynamic effects

Azure A (AA) is a cationic molecule of the class of phenothiazines that has been applied in vitro as a photosensitising agent in photodynamic antimicrobial chemotherapy. It is a di-demethylated analogue of methylene blue (MB), which has been demonstrated to be intrinsically and photodynamically highly active on mitochondrial bioenergetics. However, as far as we know, there are no studies about the photodynamic effects of AA on mammalian mitochondria. Therefore, this investigation aimed to characterise the intrinsic and photodynamic acute effects of AA (0.540 μM) on isolated rat liver mitochondria, isolated hepatocytes, and isolated perfused rat liver. The effects of AA were assessed by evaluating several parameters of mitochondrial bioenergetics, oxidative stress, cell viability, and hepatic energy metabolism. The photodynamic effects of AA were assessed under simulated hypoxic conditions, a suitable way for mimicking the microenvironment of hypoxic solid tumour cells. AA interacted with the mitochondria and, upon photostimulation (10 min of light exposure), produced toxic amounts of reactive oxygen species (ROS), which damaged the organelle, as demonstrated by the high levels of lipid peroxidation and protein carbonylation. The photostimulated AA also depleted the GSH pool, which could compromise the mitochondrial antioxidant defence. Bioenergetically, AA photoinactivated the complexes I, II, and IV of the mitochondrial respiratory chain and the F1FO-ATP synthase complex, sharply inhibiting the oxidative phosphorylation. Upon photostimulation (10 min of light exposure), AA reduced the efficiency of mitochondrial energy transduction and oxidatively damaged lipids in isolated hepatocytes but did not decrease the viability of cells. Despite the useful photobiological properties, AA presented noticeable dark toxicity on mitochondrial bioenergetics, functioning predominantly as an uncoupler of oxidative phosphorylation. This harmful effect of AA was evidenced in isolated hepatocytes, in which AA diminished the cellular ATP content. In this case, the cells exhibited signs of cell viability reduction in the presence of high AA concentrations, but only after a long time of incubation (at least 90 min). The impairments on mitochondrial bioenergetics were also clearly manifested in intact perfused rat liver, in which AA diminished the cellular ATP content and stimulated the oxygen uptake. Consequently, gluconeogenesis and ureogenesis were strongly inhibited, whereas glycogenolysis and glycolysis were stimulated. AA also promoted the release of cytosolic and mitochondrial enzymes into the perfusate concomitantly with inhibition of oxygen consumption. In general, the intrinsic and photodynamic effects of AA were similar to those of MB, but AA caused some distinct effects such as the photoinactivation of the complex IV of the mitochondrial respiratory chain and a diminution of the ATP levels in the liver. It is evident that AA has the potential to be used in mitochondria-targeted photodynamic therapy, even under low oxygen concentrations. However, the fact that AA directly disrupts mitochondrial bioenergetics and affects several hepatic pathways that are linked to ATP metabolism, along with its ability to perturb cellular membranes and its little potential to reduce cell viability, could result in significant adverse effects especially in long-term treatments.

Green and Efficient Inkjet Printing of Cotton Fabrics Using Reactive Dye@Copolymer Nanospheres

Digital inkjet printing of textiles possesses great advantages like high efficiency and flexible production, but the challenges like the risk of causing serious environmental problems due to the large usage of dyes and chemicals still remain a matter of concern. In response to this problem, herein, a novel kind of reactive dye@copolymer nanosphere was prepared through the adsorption of C. I. Reactive Red 218 dyes (RR218) onto cationic poly(styrene-butyl acrylate-vinylbenzyl trimethylammonium chloride) (PSBV) nanospheres and applied in inkjet printing on woven cotton fabric. Results show that the prepared RR218@PSBV nanospheres possessed homogeneous size and good stability for ink preparation. In comparison with the original RR218 solution, the color depth of RR218@PSBV-printed fabric increased by 1.4 times and the dye residues in the printing effluent were reduced by about 45%. Meanwhile, the consumptions of sodium carbonate and urea in conventional inkjet printing were reduced by about 3.3 and 22.8 mg/cm², respectively, and the printing process was simplified with 30% energy saving. Furthermore, the mechanism of the color enhancement by nanospheres was revealed by the calculation of absorption and scattering coefficients based on the Kubelka-Munk function. This work provides a potential application of dye@polymer nanospheres to promote the optimization of the textile inkjet printing technique and alleviates the environmental impact of conventional textile coloration.

Interaction of Reactive-Dye Chromophores and DEG on Ink-Jet Printing Performance

Digital inkjet printing has been widely used in textile industry. The quality of dye solutions and ink-jet droplets limits the ink-jet printing performance, which is very important for obtaining high-quality ink-jet printing images on fabrics. In this paper, we introduced diethylene glycol (DEG) into the dye solutions of Reactive Blue 49 and Reactive Orange 13, respectively, and investigated the interaction between dye chromophores and DEG molecules. Results indicated that the dye chromophores were featured in the aggregation. Adding DEG into the dye solution could effectively disaggregate clusters of reactive dyes, and eliminate satellite ink droplets, thus improving the resolution of the ink-jet printing image on fabrics. Under the same DEG concentration, the disaggregation effect was more obvious in Orange 13 than in Reactive Blue 49. Higher DEG concentration was required in Reactive Orange 13 solution for creating complete and stable ink drops. The surface tension and viscosity of the dye solutions were measured, and printing performance on cotton fabrics was evaluated. The interaction mechanism between dye chromophores and DEG molecules was also investigated. Results from this work are useful for high-quality ink-jet printing images on fabrics.

Systematically Exploring Molecular Aggregation and Its Impact on Surface Tension and Viscosity in High Concentration Solutions

The aggregation structure of dye molecules has a great influence on the properties of dye solutions, especially in high concentration. Here, the dye molecular aggregation structures were investigated systemically in aqueous solutions with high concentration using three reactive dyes (O-13, R-24:1 and R-218). O-13 showed stronger aggregation than R-24:1 and R-218. This is because of the small non-conjugate side chain and its β-linked position on the naphthalene of O-13. Compared with R-218, R-24:1 showed relatively weaker aggregation due to the good solution of R-24:1. The change of different aggregate distributions in the solutions were also investigated by splitting the absorption curves. Moreover, it is found that the surface tension of solutions can be modified by the combined effect of both aggregation and the position of the hydrophilic group, which, however, also have an effect on viscosity. This exploration will provide guidance for the study of high concentration solutions.

Spectrophotometric-chemometrics study of the effect of solvent composition and temperature on the spectral shape and shift of copper and nickel phthalocyanines in different aqueous-nonaqueous mixed solvents

Phthalocyanines (Pcs) are green-blue colored aromatic macrocyclic compounds used extensively in the dyeing industry. The assembly phenomenon for dye molecules is directly traceable by most of the spectroscopic methods. In this investigation, the monomer-dimer equilibria of copper and nickel phthalocyanines tetra sulfonic acid tetrasodium salts (CuPcTS, NiPcTS) have been investigated by spectrophotometric and chemometrics methods in binary mixtures of H₂O-DMSO and H₂O-CH₃CN. The dimerization constants, (K_D), enthalpies and entropies of CuPcTS and NiPcTS have been calculated by studying the UV-Vis spectra at different concentrations of dyes (10^-6 to 10^-4molL) and in the temperature range 298-343 K and in some samples up to 353 K by multivariate curve resolution (mcr) methods. By increasing the temperature, the value of K_D decreases. The inverse temperature dependence of K_D (van't Hoff equation) was used for determination of ΔH ⁰ and ΔS ⁰and following that ΔG ⁰of the dimerization reactions. As a result, upon aggregation, an increase in the intensity of the new shoulder at (~600 nm) and the Q-band at (662-670 nm) and concomitant decrease of the dimer band at (630-624 nm) are observed for all of the samples in different solvents composition. Therefore, the H-dimer type of these pigments was notable, in studied binary solvents. The effect of the solvent composition, concentration dye, and temperature on the spectral responses, the exciton parameters and concentration distribution diagrams of the two pigments were studied and discussed. The density functional theory (DFT) calculations were done in the aqueous and gas phase that they were included the HOMO-LUMO energies and the simulated UV-Vis spectrum. These calculations were beneficial for studying the UV-Vis spectrum of it in the aqueous phase for checking experimental data.

Synthesis and Characterization of Hybrid Glycolipids as Functional Organogelators and Hydrogelators

Carbohydrate-based low-molecular-weight gelators are useful and versatile compounds for the preparation of soft materials. Using N-acetyl-d-glucosamine as the starting material, we synthesized and characterized 15 glycolipids containing an amide with different ester functional groups. These include aliphatic derivatives with varying chain lengths and aromatic derivatives. Most of the hybrid amide-esters have molecular weights less than 500 D. These glycolipids were found to be effective gelators for several organic solvents, water, and aqueous solutions. Two efficient hydrogelators were also obtained at low concentrations. A few representative gels were characterized using optical microscopy, atomic force microscopy, and rheology to obtain information on their morphology and gel stability. Three gelators were also used to encapsulate naproxen sodium and toluidine blue. The sustained release of the drug from the gel to the aqueous phase was monitored by UV-vis spectroscopy. These gelators have structural flexibility that can be stimuli responsive. The esters can be hydrolyzed and several gels were converted to solutions under basic conditions. These rationally designed gelators could be utilized as stimuli-responsive smart materials with controlled release properties.