A dual-responsive colorimetric and fluorescent chemosensor based on diketopyrrolopyrrole derivative for naked-eye detection of Fe3+ and its practical application

Selective optical sensing of iron(III) ions in an aqueous medium by benzochromone-based Schiff base and its application on test strips

In this work, we designed and synthesized a novel, simple, low-cost, and effective chromone-based Schiff base ligand (HL) and its application as a chemosensor for Fe3+ detection. The structure of the synthesized sensor bears carboxylic, azomethine, and carbonyl groups which act as chelating sites for the detection of Fe3+ ions. The chemosensor HL exhibited highly selective detection of Fe3+ via a significant colour change from yellow to brown. The colour change is due to the ligand-to-metal charge-transfer (LMCT) mechanism. The sensor (HL) was characterized using UV-Vis, FTIR, NMR (1H- and 13C), and mass spectroscopy. The ligand solubility, detection condition, and sensitivity assessment suggested optimal use of DMF-water (9:1 v/v) as a working solvent at pH 7.0. Among a list of 15 metal ions screened, HL was highly selective, with instant response, towards Fe3+ ions without significant interferences with the other metal ions. The complexation ratio and association constants of HL to Fe3+ was determined by Job's plot and Benesi-Hildebrand methods, and were 2:1 and 2.24 × 103 M-1, respectively, with a detection limit of 2.86 μM. The HL probe was also applied to detect Fe3+ in real samples with acceptable performance. The simple test strips have been successfully developed and applied to the visual monitoring of Fe3+ ions with a detection limit of 68 µM. The DFT was used to examine the best interaction mode of HL with Fe metal to be Fe(III)-L or Fe(III)-2L. The chemical-reactivity and molecular electrostatic optional were figured to predict the interaction behaviour of the tested compounds.

Rapid, Sensitive, and Selective "ON-OFF" Detection of Fe3+ Ions Using Novel Acetalophanes and Their Applications in Real Samples

Three novel acetalophanes 1a-c have been designed, synthesized and characterized. The receptors 1b-c, featuring bulky anthracene groups, displayed significant selectivity for Fe3+ ions, resulting in a turn-off fluorescence mode in a DMF-buffer solution. Conversely, the non-steric probe 1a could serve as a versatile sensor for the simultaneous detection of Fe3+ and Cu2+ ions in MeOH-buffer solution. The sensing mechanism for the capability of 1a was demonstrated to be different, as evidenced by the addition of cyanide ions. The probes with Fe3+ exhibited a sensing mechanism that resulted in the deprotection of acetals to the corresponding starting materials, as confirmed by 1H NMR, IR spectra and TLC analysis. The attractive features of these practical and efficient sensors are selectivity, sensitivity (limit of detection = 0.15 µM by 1a, 0.16 µM by 1b and 0.14 µM by 1c), rapid response (less than 5 s). The on-site monitoring of various real samples, including well water, apricot, and green tea, proved to be successful for the quantitative and cost-effective detection of Fe3+. The method demonstrated good precision, even in the presence of other interfering materials.

Strategies for Improving Selectivity and Sensitivity of Schiff Base Fluorescent Chemosensors for Toxic and Heavy Metals

Toxic cations, including heavy metals, pose significant environmental and health risks, necessitating the development of reliable detection methods. This review investigates the techniques and approaches used to strengthen the sensitivity and selectivity of Schiff base fluorescent chemosensors designed specifically to detect toxic and heavy metal cations. The paper explores a range of strategies, including functional group variations, structural modifications, and the integration of nanomaterials or auxiliary receptors, to amplify the efficiency of these chemosensors. By improving selectivity towards targeted cations and achieving heightened sensitivity and detection limits, consequently, these strategies contribute to the advancement of accurate and efficient detection methods while increasing the range of end-use applications. The findings discussed in this review offer valuable insights into the potential of leveraging Schiff base fluorescent chemosensors for the accurate and reliable detection and monitoring of heavy metal cations in various fields, including environmental monitoring, biomedical research, and industrial safety.

Luminous Insights: Exploring Organic Fluorescent "Turn-On" Chemosensors for Metal-Ion (Cu+2, Al+3, Zn+2, Fe+3) Detection

There are several metal ions that are vital for the growth of the environmental field as well as for the biological field but only up to the maximum limit. If they are present in excess, it could be hazardous for the human health. With the growing technology, a series of various detection techniques are employed in order to recognize those metal ions, some of them include voltammetry, electrochemical methods, inductively couples, etc. However, these techniques are expensive, time consuming, requires large storage, advanced instrumentation, and a skilled person to operate. So, here comes the need of a sensor and it is defined as a miniature device which detects the substance of interest by giving response in the form of energy change. So, from past few decades, many sensors have been formulated for detecting metal ions with some basic characteristics like selectivity, specificity, sensitivity, high accuracy, lower detection limit, and response time. Detecting various metal ions by employing chemosensors involves different techniques such as fluorescence, phosphorescence, chemiluminescence, electrochemical, and colorimetry. The fluorescence technique has certain advantages over the other techniques. This review mainly focuses on the chemosensors that show a signal in the form of fluorescence to detect Al+3, Zn+2, Cu+2, and Fe+3 ions.

Highly efficient iodine capture and ultrafast fluorescent detection of heavy metals using PANI/LDH@CNT nanocomposite

Here, the hybrid material of polyaniline/layered double hydroxide@carbonnanotubes (PANI/LDH@CNT) is considered a multifunctional material. Instrumental methods, including FTIR, XRD, TEM, SEM, and TGA/DTA were utilized to characterize PANI/LDH@CNT. The polymerization method created PANI/LDH@CNT as an adsorbent to remove toxic iodine in hexane solution with a capture capacity of 303.20 mg g^-1 during 9 h. It is 900 mg g^-1 in the vapor phase within 24 h. After three cycles, the PANI/LDH@CNT could be regenerated while maintaining 91.90 % iodine adsorption efficiency. Due to the presence of free amine (-N) groups, OH^-, CO₂H, and π-π conjugated structures in the PANI/LDH@CNT, it is also explored for efficient iodine uptake. It was demonstrated that the pseudo-first-order (PFO) and Langmuir model had the optimum correlation with the kinetic and isotherm data, respectively. Moreover, the use of PANI/LDH@CNT is not only limited to iodine capture; it can also be utilized as a sensitive sensor that displays a fluorescence "turn-off" response for Mn⁷⁺ and Cr⁶⁺ ions and a fluorescence "turn-on" response in the case of Al³⁺ ions. The fluorescence intensity of the PANI/LDH@CNT was turned off in the presence of Mn⁷⁺ and Cr⁶⁺ because of the fluorescence inner filter effect (IFE) mechanism. In contrast, the fluorescence intensity was turned on in the case of Al³⁺, relying on the chelation-enhanced fluorescence (CHEF) effect mechanism. Under optimal conditions, the limit of detection (LOD) of 51, 59, and 81 nM for Mn⁷⁺, Cr^6+, and Al³⁺, respectively. According to the literature, this is probably the first example based on PANI/LDH@CNT as a multifunctional hybrid material employed as an adsorbent for capturing radioactive iodine and as a chemosensor for detecting heavy metal ions in aqueous solutions.

Thiophene-Bipyridine Appended Diketopyrrolopyrrole Ligands and Platinum(II) Complexes

Straightforward palladium(II) catalyzed direct cross-coupling reaction between decyl, (S)-2-methyl-butyl, and dodecyl N-substituted diketopyrrolopyrrole thiophene (DPPT), including a 3-methoxy-thiophene derivative, and 6-bromo-2,2'-bipyridine afforded a series of mono- and bis-bipyridine substituted DPPT ligands 1-3. Complexation reactions with PtCl₂(DMSO)₂ provided ortho-metalated platinum(II) complexes 1-Pt and 2-Pt, together with the N^N^O complex 3d-Pt(N^N^O) resulted from the O-Me activation of the intermediary complex 3d-Pt(N^N). The ligand 1b and the mononuclear complexes 1a-Pt and 1b-Pt have been structurally characterized by single crystal X-ray structure, evidencing the establishment of numerous intermolecular π-π interactions in the solid state. Moreover, in the crystal structure of the model complex DMTB-Pt(N^N^O) (DMTB = 3,4-dimethoxy-(2,2'-bipyridine)) the chelating tridentate N^N^O mode is clearly evidenced. The chiral ligand 1b and its mononuclear complex 1b-Pt do not show any CD signal in solution, but they are CD active in the solid state with bisignate bands in the low energy region, opposite in sign between the ligand and the complex, suggesting helical supramolecular arrangement of the dpp chromophore in the solid state. Photophysical investigations demonstrate that all of the ligands are fluorescent with high quantum yields, while the emission is quenched for the complexes, except partially in 3d-Pt(N^N), very likely through an intersystem crossing mechanism promoted by the heavy metal. Density functional theory calculations support the differences observed between the absorption properties of the ligands, ortho- and non-ortho-metalated complexes. The highly fluorescent bipyridine ligands reported herein open the way toward multifunctional transition metal complexes and their use in organic electronics.

Highly selective fluorescent peptide-based chemosensors for aluminium ions in aqueous solution

Two novel fluorescent peptide-based chemosensors, including A (2-amino-benzoyl-Ser-Glu-Glu-NH₂) and B (2-amino-benzoyl-Ala-Glu-Pro-Glu-Ala-Glu-Pro-NH₂) were synthesized and characterized by nuclear magnetic resonance (NMR) spectra. These fluorescent probes exhibited excellent selective and sensitive responses to Al³⁺ ions over other metal ions in aqueous buffered solutions. The limits of detection for both chemosensors towards the Al³⁺ ions were in the order of ∼10^-7 M (A: 155 nM and B: 195 nM), which clearly indicates that these probes have significant potential for biological applications. They also displayed high binding affinity (1.3029 × 10⁴ M^-1 and 1.7586 × 10⁴ M^-1 relevant to A and B respectively). These two chemosensors are great analytical probes that produce turn-on responses upon binding to Al³⁺ ions through an intramolecular charge transfer (ICT) mechanism. In addition, the application of both chemosensors was examined over a wide range of pH. The fluorescent peptide-based probes and Al³⁺ form a 1:1 coordination complex according to the ESI-MS and Job's plot analysis. Notably, upon addition of Al³⁺ to these chemosensors, a fluorescence enhancement of approximately 8-fold was observed and the binding mode was determined using NMR titration and fluorescence emission data.

Bithiophene-based fluorescent sensor for highly sensitive and ultrarapid detection of Hg2+ in water, seafood, urine and live cells

Using Hg²⁺-promoted deprotection reaction, we have developed a new fluorescent turn-on sensor 2TS based on bithiophene fluorophore for Hg²⁺ detection. The sensing mechanism of 2TS towards Hg²⁺ was strongly proved by ¹H NMR, FTIR, HRMS, UV-vis and fluorescence spectra. Remarkly, 2TS towards Hg²⁺ in 100% aqueous solution shows high sensitivity with a low detection limit of 19 nM, superior selectivity and ultra-rapid response of 20 s during a wide sensing pH range from 4 to 10. Taking advantage of the excellent properties, the low-cost sensor 2TS-based filter paper/TLC test strips were fabricated for visual, immediate and quantitative detection of Hg²⁺ in water, proving its applicability towards sensitive in-situ and on-site detection. Meanwhile, 2TS showed high analytical performance for Hg²⁺ detection in water, seafood as well as human urine samples. Moreover, thanks to the good water solubility, negligible cytotoxicity, good biocompatibility and cell-membrane permeability, 2TS was further applied to effectively image Hg²⁺ in live cells. Furthermore, the developed sensor 2TS acted as good fluorescent display material for Hg²⁺ with obvious color change.

Colorimetric Metal Sensing of Fe3+ and Cr3+ and Photophysical and Electrochemical Studies Based on Benzo[4,5]thiazolo[3,2-a]pyrimidine-3-carboxylate and Its Derivatives

Benzo[4,5]thiazolo[3, 2-a]pyrimidine-3-carboxylate derivatives (4a-i) containing electron-donor and electron-acceptor groups with remarkable photophysical and electrochemical properties were synthesized. The changes in absorption properties of compound 4a in the presence of various cations were evaluated. Compound 4a can act as a colorimetric sensor for highly sensitive and selective detection of Fe³⁺ and Cr³⁺in acetonitrile solvent. Using measurements of absorbance intensity, the binding constants for the 4a + Fe³⁺ complex and 4a + Cr³⁺ complex were found to be 1.958 × 10⁸ and 1.5442 × 10⁷ M^-1 with lower detection limits of 52 and 110 nM, respectively. ¹H NMR titrations, Fourier transform infrared (FTIR) studies, electrospray ionization (ESI)-mass spectra, and Job's plots were used to verify the mechanism of the specific reaction and colorimetric sensing of 4a + Fe³⁺ and 4a + Cr³⁺. The application of compound 4a for the determination of Fe³⁺ in spiked samples of iron tablets in different environmental water samples showed a satisfactory result with good recovery.

Monitoring, sampling, and automated analysis

A review of the literature published in 2018 on topics related to monitoring, sampling, and automated analysis is presented. The review includes current developments in monitoring, sampling, and analysis of water, wastewater, and groundwater. This review includes the following sections: brief introduction; sample preparation and extraction techniques; real-time, high-frequency, and/or in situ monitoring (microbiological, inorganic, organic, metals, and others); passive monitoring; and the biosensors. In the end, the authors have discussed future of the topic. PRACTITIONER POINTS: Advances in monitoring, sampling and automated analysis of water and wastewater are summarized. Real-time, high-frequency, and in-situ monitoring and analysis of pollutants are summarized. Topics include sample preparation and extraction and passive monitoring, and biosensors for pollutants.

Fluorescence study of 5-nitroisatin Schiff base immobilized on SBA-15 for sensing Fe3+

N’-(5-nitro-2-oxoindolin-3-ylidene) thiophene-2-carbohydrazide (NH) was successfully synthesized as a ligand, then grafted onto the surface of mesoporous silica SBA-15via an aminopropyl bridge. The successful grafting of ligand NH onto the hybrid nanomaterial (SBA-15/APTES-NH) was confirmed by infrared spectroscopy. On excitation at 276 and 370 nm, the ligand NH and the hybrid nanomaterial SBA-15/APTES-NH showed a strong and narrow emission peak centered at 533 nm. By dispersing SBA-15/APTES-NH in an aqueous solution containing metal ions, the resulting solid materials showed a higher binding of NH sensing site to Fe3+ ions as compared to the others with a quench of the emission intensity up to 84%. This result showed that the hybrid nanomaterial is a potential chemosensor that requires development for the detection of metal ions.

A novel boronic acid-based fluorescent sensor for selectively recognizing Fe3+ ion in real time

Boronic acid provides faster fluorescence response to Fe3+ compared to other reported sensors, which is critical for continuous dynamic detection. Herein, we reported a novel boronic acid-based sensor 4 that could recognize Fe3+ ion in real time. After 10 equiv. of Fe3+ ion (1 mM) was added, the fluorescence of sensor 4 was immediately quenched by 96%. While other ions, including Ba2+, Ca2+, Cr2+, Cd2+, Co2+, Cs2+, Cu2+, Fe2+, K+, Li+, Mg2+, Mn2+, Na+, Ni2+ or Zn2+, respectively, did not change the fluorescence significantly. Further tests indicated that the high selectively sensing Fe3+ ion benefits from the two boronic acid functionalities in the structure. Moreover, interference experiments showed this sensor has an excellent anti-interference ability. In addition, we performed binding activity test in rabbit plasma and other real samples for practical applications, obtaining similar results. And the thin layer loading sensor 4 was also successfully applied to recognize Fe3+ ion among various ions. Therefore, 4 may serve as a potential sensor for continuous monitoring and detecting Fe3+ ion in real time.

A fast, highly selective and sensitive colorimetric and fluorescent sensor for Cu2+ and its application in real water and food samples

A new oligothiophene functionalized Schiff base sensor 3TDC has been successfully designed and synthesized. Sensor 3TDC exhibited "naked-eye" colorimetric and selective "on-off" fluorescence response toward Cu²⁺ with high selectivity and sensitivity within a wide pH range. The binding ratio of the sensor 3TDC and Cu²⁺ was determined to be 1:1 through fluorescence titration, Job's plot, ¹H NMR titration, FTIR and DFT studies. The detection limit is calculated to be as low as 2.81 × 10^-8 M, which is much lower than the allowable level of Cu²⁺ in drinking water set by U.S. Environmental Protection Agency (~20 μM) and the World Health Organization (~30 μM). The binding constant (K_a) of Cu²⁺ to sensor 3TDC was found to be 2.52 × 10⁴ M^-1. Sensor 3TDC for Cu²⁺ detection exhibited fast fluorescence response within 30 s and high anti-interference performance. Moreover, sensor 3TDC could be used as an effective fluorescent sensor for detecting Cu²⁺ ions in various real water and food samples with good accuracy and high precision.

On-off-on relay fluorescence recognition of ferric and fluoride ions based on indicator displacement in living cells

A new boronic acid derivative functionalized with a 4-(3-(4-(4,5-diphenyl-1H-imidazole-2-yl)phenyl)-1,2,4-oxadiazol-5-yl)phenyl (IOP) moiety was synthesized for use as a sequential "on-off-on"-type relay fluorescence probe for Fe³⁺ ions and F^- ions with high selectivity and sensitivity under physiological conditions. The introduction of Fe³⁺ to IOP boronic acid (IOPBA) formed an Fe³⁺IOPBA complex, which led to quenching of the blue fluorescence intensity at 458 nm. The lowest-energy conformation of IOPBA was theoretically predicted to adopt an extended structure, and the Fe³⁺ ion in the Fe³⁺IOPBA complex was coordinated to two phenyl groups to form a π-complex. Upon addition of F^- to the Fe³⁺IOPBA complex, the original fluorescence was recovered due to formation of [FeF₆]^3‒, resulting in "on-off-on"-type sensor behavior. IOPBA showed high selectivity towards Fe³⁺ among other cations. Moreover, the Fe³⁺IOPBA complex showed specific selectivity towards F^-, with other cations and anions not interfering with detection. Both sensing processes showed 1:1 stoichiometry with binding constants of 6.87 × 10⁶ and 4.49 × 10⁶ mol^-1 L for Fe³⁺ with IOPBA and F^- with Fe³⁺IOPBA, respectively. The limits of detection for Fe³⁺ and F^- were 10 and 1 nM, respectively. The proposed method was successfully applied in real water samples. Furthermore, the probe had low cytotoxicity and was successfully used as a bioimaging reagent to detect intracellular Fe³⁺ and F^- in living HeLa cells.

Novel thiophene-based colorimetric and fluorescent turn-on sensor for highly sensitive and selective simultaneous detection of Al3+ and Zn2+ in water and food samples and its application in bioimaging

A novel bifunctional thiophene-based Schiff base TS as a colorimetric and fluorescent turn-on sensor for rapid and simultaneous detection of Al³⁺ and Zn²⁺ ions with high selectivity and sensitivity has been developed. The sensor shows remarkable fluorescence enhancement response for Al³⁺ and Zn²⁺ over a broad pH range with good anti-interference capability, which accompanied with an obvious color change easily detected by naked eyes. Sensor TS can detect as low as 3.7 × 10^-9 M for Al³⁺ and 3.0 × 10^-8 M for Zn²⁺, whereas respective association constants are 1.16 × 10⁴ M^-1 and 2.08 × 10⁴ M^-1. With the help of fluorescence titration and Job's plot, the stoichiometric ratio of TS with Al³⁺/Zn²⁺ was determined to be 1:1. The sensing mechanism of sensor TS with Al³⁺/Zn²⁺ based on the chelation-enhanced fluorescence (CHEF) was analyzed in detail through ¹H NMR titration, FTIR, HRMS and DFT studies. Moreover, sensor TS has been applied to the detection of Al³⁺ and Zn²⁺ in real environmental water and food samples as well as the filter paper-based test strips. Furthermore, sensor TS has good cell-permeability and can be used to selectively sense intracellular Al³⁺ and Zn²⁺ by bioimaging.

Layered rare-earth hydroxide (LRH, R = Tb, Y) composites with fluorescein: delamination, tunable luminescence and application in chemosensoring for detecting Fe(iii) ions

We demonstrate a novel example of tunable luminescence and the application of the delaminated FLN/OS-LRH composites (LRHs are layered rare-earth hydroxides, R = Tb, Y; FLN is the fluorescein named 2-(6-hydroxy-3-oxo-(3H)-xanthen-9-yl)benzoic acid; OS is the anionic surfactant 1-octane sulfonic acid sodium) in detecting Fe(iii) ions. The FLNxOS1-x species (x = 0.02, 0.05, 0.10, and 0.20) are intercalated into the LTbyY1-yH layers (y = 1, 0.9, 0.7, 0.5, 0.3, 0.1 and 0) by ion exchange reactions to yield the composites FLNxOS1-x-LTbyY1-yH. In the solid state, the LYH composites display green emission (564 nm) arising from the organic FLN, while in LTbH composites, the luminescence of the Tb3+ in the layers (545 nm) and the FLN in the interlayers is co-quenched. In the delaminated state in formamide (FM), FLNxOS1-x-LTbH composites display green to yellowish-green luminescence (540-574 nm) following the increasing FLN/OS ratio; while the FLN0.02OS0.98-LTbyY1-yH composites show green emission at ∼540 nm. The fluorescence lifetimes of the composites (4.22-4.63 ns) are comparable to the free FLN-Na, and the quantum yields (31.62-78.70%) of the composites especially that (78.70%) of the FLN0.02OS0.98-LYH are much higher than that (28.40%) of free FLN-Na. The recognition ability of the FLN0.02OS0.98-LYH composite for metal cations is researched. The delaminated FLN0.02OS0.98-LYH colloidal suspension exhibits high selectivity for Fe3+ over other ions (Mg2+, Al3+, Ni2+, Co2+, Cu2+, Zn2+, Mn2+, Pb2+, and Cd2+) with fluorescence quenching, which can work as a kind of turn-off fluorescence sensor for the detection of Fe3+. The detection limit of Fe3+ is determined to be 2.58 × 10-8 M and the quenching constant (Ksv) is 1.70 × 103 M-1. This is the first work on LRH materials working as a chemosensor for recognising metal cations. It provides a new approach for the design of LRH materials to be applied in fluorescence chemosensing.

Synthesis and fluorescence spectral studies of novel quinolylbenzothiazole-based sensors for selective detection of Fe3+ ion

Four novel fluorescence sensors bearing a quinolylbenzothiazole platform were synthesized and characterized. The sensors displayed excellent selectivity and highly sensitive fluorescence response to Fe3+ ion in H2O/DMSO buffer solution (1:4 volume ratio; Tris-HCl, 0.01 mol/L; pH = 7.40) at 500 nm originating from quinolylbenzothiazole fluorophore group. Other cations, namely Li+, Na+, K+, Mg2+, Ca2+, Co2+, Ni2+, Cd2+, Cu2+, Zn2+, Mn2+, Ba2+, Pb2+, Hg2+, Al3+, and Eu3+, showed no appreciable change in fluorescence spectrum. The binding stoichiometry between sensors L1, L2, L3, or L4 and Fe3+ was observed to be 1:1 based on fluorescence titration and Jobs plot analysis. The detection limits of L1, L2, L3, and L4 for Fe3+ were found to be 0.155, 0.362, 0.249, and 0.517 μmol/L, respectively. Furthermore, possible utilization of sensors to detect Fe3+ in living HeLa cells was also investigated by confocal fluorescence microscopy.

Highly selective and sensitive determination of Cu2+ in drink and water samples based on a 1,8-diaminonaphthalene derived fluorescent sensor

A new simple and efficient fluorescent sensor L based on 1,8‑diaminonaphthalene Schiff-base for highly sensitive and selective determination of Cu²⁺ in drink and water has been developed. This Cu²⁺-selective detection over other tested metal ions displayed an obvious color change from blue to colorless easily detected by naked eye. The detection limit is determined to be as low as 13.2 nM and the response time is very fast within 30 s. The 1:1 binding mechanism was well confirmed by fluorescence measurements, IR analysis and DFT calculations. Importantly, this sensor L was employed for quick detection of Cu²⁺ in drink and environmental water samples with satisfactory results, providing a simple, rapid, reliable and feasible Cu²⁺-sensing method.

Fluorescent organic nanoparticles with enhanced fluorescence by self-aggregation and their application for detection of Fe3+ ions

The chemosensor L has a detection limit of 5.57 nM for Fe³⁺ in a DMF/H₂O (9 : 1, v/v) mixture.

A new fluorescent macrocyclic nano-chemosensor for Fe3+ and I− in aqueous solution

A fluorescent nano-chemosensor, capable of detecting Fe³⁺ and I⁻ in aqueous media, has been designed and synthesized.