Preparation of cellophane-based substrate and its SERS performance on the detection of CV and acetamiprid

Aramid nanofiber membrane decorated with monodispersed silver nanoparticles as robust and flexible SERS chips for trace detection of multiple toxic substances

Aramid nanofibers (ANFs) as an innovative nanoscale building block exhibit great potential for novel high-performance multifunctional membranes attributed to their extraordinary performance. However, the application of aramid nanofibers in the field of surface enhanced Raman scattering (SERS) sensing has been rarely reported. In this work, aramid nanofibers derived from commercial Kevlar fibers were synthesized by a facile dimethyl sulfoxide/potassium hydroxide (DMSO/KOH) solution treatment. The monodispersed silver nanoparticle-decorated aramid nanofiber (m-Ag@ANF) membranes were constructed by an efficient vacuum filtration technique. Taking advantages of unique intrinsic properties of ANF, the m-Ag@ANF substrates exhibit good flexibility, excellent mechanical properties and prominent thermal stability. Besides, due to the abundance of positively charged amino-group on the ANF substrates, the negatively charged m-AgNPs were uniformly and firmly deposited on the surface of ANF substrate through electrostatic interactions. As a result, the optimal flexible m-Ag-9@ANF SERS substrate exhibits high sensitivity of 10-9 M for methylene blue (MB) and excellent signal reproducibility (RSD = 6.37 %), as well as outstanding signal stability (up to 15 days). Besides, the 2D Raman mapping and FDTD simulations further reveal prominent signal homogeneity and strong electric field distribution for flexible m-Ag-9@ANF SERS substrate. Finally, it is demonstrated that the flexible m-Ag-9@ANF SERS substrate can also be used for detection of toxic molecules on irregular surfaces by a feasible paste-and-read process. The m-Ag@ANF paper exhibits potential applications as a flexible, low-cost, robust and stable SERS sensing platform for trace detection of toxic materials.

Fluorescent aptasensor mediated with multiple ssDNA for sensitive detection of acetamiprid in vegetables based on magnetic Fe3O4/C-assisted separation

Acetamiprid (ACE) is a highly effective broad-spectrum insecticide, and its widespread use is potentially harmful to human health and environmental safety. In this study, magnetic Fe3O4/carbon (Fe3O4/C), a derivative of metal-organic framework MIL-101 (Fe), was synthesized by a two-step calcination method. And a fluorescent sensing strategy was developed for the efficient and sensitive detection of ACE using Fe3O4/C and multiple complementary single-stranded DNA (ssDNA). By using aptamer with multiple complementary ssDNA, the immunity of interference of the aptasensor was improved, and the aptasensor showed high selectivity and sensitivity. When ACE was present, the aptamer (Apt) combined with ACE. The complementary strand of Apt (Cs1) combined with two short complementary strands of Cs1, fluorophore 6-carboxyfluorescein-labeled complementary strand (Cs2-FAM) and the other strand Cs3. The three strands formed a double-stranded structure, and fluorescence would not be quenched by Fe3O4/C. In the absence of ACE, Cs2-FAM would be in a single-chain state and would be adsorbed by Fe3O4/C, and the fluorescence of FAM would be quenched by Fe3O4/C via photoelectron transfer. This aptasensor sensitively detected ACE over a linear concentration range of 10-1000 nM with a limit of detection of 3.41 nM. The recoveries of ACE spiked in cabbage and celery samples ranged from 89.49% to 110.76% with high accuracy.

SERS-active substrates using DVD-R coated in silver thin films: A preliminary study for detection of commercial glyphosate

Glyphosate (GLP) is the herbicide with the highest level of global commercialization and historical use. Even though numerous studies have found this substance to be harmless, current research demonstrates that GLP might affect human health. For this reason, researcher efforts are concentrating on alternatives for analytical quantification, such as Surface Enhanced Raman Spectroscopy (SERS). In this work, a DVD-R@AgNPs SERS substrate was produced by the Cathodic Cage Plasma Deposition (CCPD) technique, which allowed a thin film layer deposition of silver nanoparticles (AgNPs) on the PC grating structure from Digital Video/Versatile Disc Recordable (DVD-R). Scanning Electron Microscopy with energy-dispersive X-ray spectroscopy was used to characterize the substrate and chemical changes on the surface after AgNPs deposition. The DVD-R@AgNPs substrate was used to detect standard crystal violet (CV), GLP, and RoundupTM GLP (GLP-RU) using Raman Spectroscopy. The CV was used as a control sample for SERS measurement, allowing the calculation of the substrate enhancement factor, which was in the order of ∼ 105. To evaluate the efficiency of the SERS substrate, the limit of detection was calculated and showed values of ∼ 10-10 mol/L for CV, 10-7 and 10-8 mol/L for GLP, and 10-6 mol/L for GLP-RU. Thus, the DVD-R@AgNPs SERS sensor is a low-cost substrate that analyzes traces of pesticides such as commercial GLP, demonstrating high SERS sensitivities and many applications.

SERS detection of Hg2+ and aflatoxin B1 through on-off strategy of oxidase-like Au@HgNPs/carbon dots

In this work, cerium-doped carbon dots (Ce-CDs) both as a reducing agent and template hybrid gold nanoparticles (AuNPs) with weak oxidase-like (OXD) activity was synthesized for the detection of Hg²⁺ and aflatoxin B₁ (AFB₁). The AuNPs can catalyze efficiently mercury ion (Hg²⁺) reduction to the metallic (Hg⁰) to form Au-Hg amalgam (Au@HgNPs). The obtained Au@HgNPs with strong OXD-like activity oxidize without Raman-active leucomalachite green (LMG) into the Raman-active malachite green (MG) and simultaneously as the SERS substrates by the formed Raman "hot spot" through MG-induced Au@HgNPs aggregation. While AFB₁ was introduced resulting in the SERS intensity decreasing due to Hg²⁺ with AFB₁ via carbonyl group to inhibit the aggregation of Au@HgNPs. The work paves a new path for the design of a nanozyme-based SERS protocol for tracing Hg²⁺ and AFB₁ residues in foodstuff analysis.

Multifunctional Au@Ag@SiO2 Core-Shell-Shell Nanoparticles for Metal-Enhanced Fluorescence, Surface-Enhanced Raman Scattering, and Photocatalysis Applications

Au@Ag@SiO₂ core-shell-shell nanoparticles (NPs) were prepared by a facile one-pot synthetic technique. The Au@Ag core size and SiO₂ shell thicknesses are readily controlled by adjusting the precursor concentration. The multilayered NPs with dielectric SiO₂ outer shells and bimetallic Au@Ag cores exhibited both the chemical stability of Au with the high scattering efficiency of Ag. Furthermore, the SiO₂ shell is beneficial to the metal-enhanced fluorescence for biomedical applications. Metal-enhanced fluorescence, surface-enhanced Raman scattering, and photocatalytic activities of silica-coated Au@Ag, Ag, Au, and Au/Ag core-shell NPs were compared and discussed. The size and structure of Au@Ag@SiO₂ core-shell-shell NPs were optimized to maximize their optical and catalytic activities.

Evaluation of cellophane as platform for colorimetric assays on microfluidic analytical devices

Due to their low cost, simplicity, and pump-free liquid transport properties, colorimetric assays on paper spots and microfluidic paper-based analytical devices (µPADs) are regarded as useful tools for point-of-care testing (POCT). However, for certain types of colorimetric assays, the "non-transparent" and "white" characters of paper can be a disadvantage. In this work, the possibilities of using cellophane as an alternative platform for colorimetric assays have been investigated. Cellophane is a low cost and easy-to-handle transparent film made of regenerated cellulose. Owing to its hydrophilic character, cellophane-based microfluidic channels fabricated through a print-cut-laminate approach enabled pump-free liquid transport into multiple detection areas, similar to µPADs. In addition, the water absorption characteristics of cellophane allowed the stable immobilization of water-soluble colorimetric indicators without any surface modification or additional reagents. The transparency of cellophane provides possibilities for simple background coloring of the substrates, increasing the dynamic signal range for hue-based colorimetric assays, as demonstrated for two model assays targeting H₂O₂ (46-fold increase) and creatinine (3.6-fold increase). Finally, a turbidity detection-based protein assay was realized on black background cellophane spots. The lowest limits of detection achieved with the cellophane-based devices were calculated as 7 µM for H₂O₂, 2.7 mg dL^-1 for creatinine, and 3.5 mg dL^-1 for protein (human serum albumin).

SERS Sensing Using Graphene-Covered Silver Nanoparticles and Metamaterials for the Detection of Thiram in Soil

Multilayer hyperbolic metamaterial (HMM)-based SERS substrates have received special consideration because they accommodate various propagation modes such as surface plasmonic polaritons (SPP). However, the SPP modes are difficult to generate in HMM due to their weak electric field enhancement. In this article, we designed novel SERS substrates consisting of graphene-covered AgNPs and HMM. The graphene-covered AgNPs work as an external coupling structure for hyperbolic metamaterials due to this structure exhibiting significant plasmonic effects as well as unique optical features. The localized surface plasmonic resonance (LSPR) of the graphene-covered AgNPs excited the SPP and thus formed a strong hot spot zone in the nanogap area of the graphene. The Raman experiment was performed using rhodamine 6G (R6G) and crystal violet (CV), which showed high stability and a maximum enhancement factor of 2.12 × 10⁸. The COMSOL simulation further clarified that enhanced SERS performance was due to the presence of monolayer graphene and provided an atomically flat surface for organic molecules in a more controllable manner. Interestingly, the proposed SERS structure carries out quantitative detection of thiram in soil and can satisfy the basic environmental need for pesticide residue in the soil.

A super-hydrophobic perfluoropolyether coated polytetrafluoroethylene sheets substrate for detection of acetamiprid surface-enhanced Raman spectroscopy

In this paper, a hydrophobic substrate as concentrators including an inner layer of polytetrafluoroethylene (PTFE) and an outer layer covered a thin layer of perfluoropolyether (PFPE) was constructed to achieve a higher sensitivity for acetamiprid (AC) SERS detection. The condensation effect of the PTFE-PFPE hydrophobic substrate-induced aggregation of gold nanoparticles (Au NPs) result ''hot spots'' for SERS. The hydrophobic substrate is better reproducibility (RSD < 5%) compared with that on a conventional silicon wafer. A further application of the hydrophobic substrate was demonstrated by the detection of AC in tea samples within a detection range of 0.03 mg/L to 3 mg/L. The hydrophobic substrate eliminates the problem of solution diffusion to avoid the "coffee ring" effect (When a droplet adheres to a solid surface, the suspended molecular particles usually deposit on the edge of the droplet to form a ring).

Determination of Acetamiprid Residues in Vegetables by Indirect Competitive Chemiluminescence Enzyme Immunoassay

Acetamiprid (ACE) is widely used in various vegetables to control pests, resulting in residues and posing a threat to human health. For the rapid detection of ACE residues in vegetables, an indirect competitive chemiluminescence enzyme immunoassay (ic-CLEIA) was established. The optimized experimental parameters were as follows: the concentrations of coating antigen (ACE-BSA) and anti-ACE monoclonal antibody were 0.4 and 0.6 µg/mL, respectively; the pre-incubation time of anti-ACE monoclonal antibody and ACE (sample) solution was 30 min; the dilution ratio of goat anti-mouse-HRP antibody was 1:2500; and the reaction time of chemiluminescence was 20 min. The half-maximum inhibition concentration (IC₅₀), the detection range (IC₁₀–IC₉₀), and the detection limit (LOD, IC₁₀) of the ic-CLEIA were 10.24, 0.70–96.31, and 0.70 ng/mL, respectively. The cross-reactivity rates of four neonicotinoid structural analogues (nitenpyram, thiacloprid, thiamethoxam, and clothianidin) were all less than 10%, showing good specificity. The average recovery rates in Chinese cabbage and cucumber were 82.7–112.2%, with the coefficient of variation (CV) lower than 9.19%, which was highly correlated with the results of high-performance liquid chromatography (HPLC). The established ic-CLEIA has the advantages of simple pretreatment and detection process, good sensitivity and accuracy, and can meet the needs of rapid screening of ACE residues in vegetables.

Facile and robust fabrication of hierarchical Au nanorods/Ag nanowire SERS substrates for the sensitive detection of dyes and pesticides

Surface enhanced Raman spectroscopy (SERS) has emerged as a promising tool for the rapid and ultrasensitive recognition of trace amounts of environmental pollutants. Hierarchical SERS substrates usually show superior performance to single-component substrates but require complicated preparation protocols. Herein, a facile, robust and low-cost route for the fabrication of hierarchical SERS substrates has been reported, in which no complicated laborious protocols or sophisticated equipment is needed. In the hierarchical SERS substrate, Au nanorods were distributed onto the network of Ag nanowires through evaporation induced self-assembly. The density of the Au nanorods and Ag nanowires could be easily tailored by tuning the number of droplets of gold nanorod solution and the concentration of silver nanowire solution. The nanogaps formed between Au nanorods and Ag nanowires were able to induce a rich enhanced electromagnetic field area via localized surface plasmon resonances and surface plasmon polaritons to achieve amplification of the Raman signal. The as-prepared substrate showed high uniformity and was capable of identifying 10^-12 M rhodamine 6G, 10^-10 M thiram and 10^-10 M crystal violet, with correlation coefficients (R²) all higher than 0.98. This approach can be employed for the detection of trace dyes, pesticides or other environmental pollutants with high sensitivity and uniformity.

Optically active plasmonic cellulose fibers based on Au nanorods for SERS applications

Cellulose might be a promising material for surface-enhanced Raman scattering (SERS) substrates due to its wide availability, low cost, ease of fabrication, high flexibility and low optical activity. This work shows, for the first time development of the cellulose-based substrate, that owes its SERS activity to the presence of gold nanorods in its internal structure, and not only on the surface, as it is shown elsewhere, thus ensuring superior stability of the obtained material. This flexible cellulose-based substrate exhibiting plasmonic activity, provide easy and reproducible detection of different analytes via SERS technique. The substrate was prepared by introduction of gold nanorods into the cellulose fibers matrix using an eco-friendly process based on N-Methylmorpholine-N-Oxide. Au-modified cellulose fibers were used for the detection of p-Mercaptobenzoic acid and Bovine Serum Albumin by the SERS method. The obtained results show that this substrate offers large signal enhancement of 6-orders of magnitude, and high signal reproducibility with a relative standard deviation of 8.3%. Additionally, washing tests (90 °C, 20 h) showed superior stability of the as prepared plasmonic fibers, thus proving the good reusability of the substrates and the long shelf life.

Facile Detection and Quantification of Acetamiprid Using a Portable Raman Spectrometer Combined with Self-Assembled Gold Nanoparticle Array

Rapid and facile determination of pesticides is critically important in food and environmental monitoring. This study developed a self-assembled gold nanoparticle array based SERS method for highly specific and sensitive detection of acetamiprid, a neonicotinoid pesticide that used to be difficult in SERS analysis due to its low affinity with SERS substrates. SERS detection and quantification of acetamiprid was conducted with self-assembled gold nanoparticle arrays at the interface of chloroform and water as the enhancing substrate. Since targets dissolved in chloroform (organic phase) also have access to the hot-spots of Au NP array, the developed method exhibited good sensitivity and specificity for acetamiprid determination. Under the optimal conditions, SERS intensities at Raman shifts of 631 cm−1 and 1109 cm−1 displayed a good linear relationship with the logarithm concentration of acetamiprid in the range of 5.0 × 10−7 to 1.0 × 10−4 mol/L (0.11335 ppm to 22.67 ppm), with correlation coefficients of 0.97972 and 0.97552, respectively. The calculated LOD and LOQ of this method were 1.19 × 10−7 mol/L (0.265 ppb) and 2.63 × 10−7 mol/L (0.586 ppb), respectively, using SERS signal at 631 cm−1, and 2.95 × 10−7 mol/L (0.657 ppb) and 3.86 × 10−7 mol/L (0.860 ppb) using SERS signal at 1109 cm−1, respectively. Furthermore, the developed SERS method was successfully applied in determining acetamiprid on the surface of apple and spinach. This method offers an exciting opportunity for rapid detection of acetamiprid and other organic pesticides considering its advantages of simple preparation process, good specificity and sensitivity, and short detection time (within 1 h).

In situ and rapid determination of acetamiprid residue on cabbage leaf using surface-enhanced Raman scattering

BACKGROUND

Pesticide residues in agricultural products and foods pose a serious threat to human health, and therefore a simple, rapid and direct method is urgently needed for pesticide residue detection. In addition to realizing the detection of acetamiprid in cabbage extract solution, the main target of this study was to establish an in situ surface-enhanced Raman scattering (SERS) method, which could directly detect acetamiprid residue on cabbage leaf without the need for extraction. Acetamiprid was first used to contaminate the surface of fresh cabbage leaf, and then bimetallic silver-coated gold nanoparticles (Au@AgNPs) were added on the contaminated spots and dried for SERS measurement.

RESULTS

Results suggested that acetamiprid can be detected in cabbage extract and on cabbage leaf surface in situ using the SERS method based on the Au@AgNPs substrate. The limit of detection was 0.08 μg mL^-1 in cabbage extract and 0.14 mg kg^-1 on cabbage leaf, the recovery ranged from 80.5% to 105.5% and the relative standard deviation was in the range 4.37-10.63%.

CONCLUSIONS

The proposed SERS method provides an in situ, nondestructive and rapid way to detect acetamiprid residue on the surface of fruits and vegetables, which could serve as an auxiliary approach for early screening of contaminated produce in field or on site in the future. © 2020 Society of Chemical Industry.

Polysaccharide-based substrate for surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy (SERS) became a useful analytical technique with the development of appropriate metallic substrates. The need for SERS substrates that immobilize metallic nanoparticles prompted this work to search for an appropriate material. This work presents the preparation, characterization and application of a SERS substrate for crystal violet (CV) detection, as the probe molecule. The inner layer of the substrate is a thin film of the fungal β-D-glucan, botryosphaeran, covered by a thin layer of silver nanoparticles (AgNPs). The nanoparticles were produced by laser ablation, a fast and clean method for their preparation, and the layers were assembled by casting. Scanning electron and atomic force microscopies, UV-VIS and Raman spectroscopy and X-ray diffraction allowed the characterization of the surface of the substrate. Analysis by Raman spectroscopy showed promising results for SERS amplification on the substrate. Detection of CV reached enhancement factors up to 10⁶ orders of magnitude, compared to normal Raman spectra. Linearity was observed for analyses on the SERS substrate at concentration ranges of 0.005 to 1 µmol L^-1. The assembly reached the detection of 12 pmol cm^-2 of CV, which corresponds to 96 fg of the probe molecule contained in the area of the substrate effectively interacting with the laser. The substrate was more efficient than silver colloids to perform SERS.

Determination of acetamiprid using electrochemiluminescent aptasensor modified by MoS2QDs-PATP/PTCA and NH2-UiO-66

A novel aptasensor has been fabricated based on the resonance energy transform (RET) system from MoS₂QDs-PATP/PTCA (donor) to NH₂-UiO-66 (acceptor). The electrochemiluminescence (ECL) signal of PTCA was greatly amplified due to the decoration of MoS₂QDs-PATP, and the NH₂-UiO-66 was utilized to label the signal probe DNA (pDNA), which hybridizes with the exposed aptamer anchored on the surface of MoS₂QDs-PATP/PTCA. With the target acetamiprid, the specific binding of acetamiprid to aptamer causes the connection between the donor and the acceptor to be interrupted and produce an "on" ECL signal. Thus, an "off-on" ECL sensing platform for sensitive and selective acetamiprid assay was designed. Under the optimal condition, the ECL signal of the aptasensor was found to be linearly related to the logarithm of the acetamiprid concentration ranging from 0.1 fM to 0.1 μM with a detection limit of 0.064 fM. More importantly, the recovery rate of the ECL aptasensor was calculated to be 98.7 ~ 106% with a RSD lower 5.1% for the residual acetamiprid assay in real food samples, which indicated that the aptasensor has high potential for practical applications.

A nitrile-mediated aptasensor for optical anti-interference detection of acetamiprid in apple juice by surface-enhanced Raman scattering

Currently, the detection of pesticide is critical for food safety assurance, but it is still challenging due to the presence of biological interferents from complex food matrix. In this study, we developed an optical anti-interference surface-enhanced Raman scattering (SERS) aptasensor system for trace detection of acetamiprid. 4-(Mercaptomethyl) benzonitrile (MMBN) containing CN bond was used as Raman tag to provide a sharp peak (2227 cm^-1) in the Raman-silent spectral window (1800-2800 cm^-1) where no Raman signal existed for most of molecules. Gold nanoparticles (AuNPs) bonded with polyadenine (polyA)-mediated aptamer and Raman tag (MMBN-AuNPs-aptamer) was synthesized as Raman probe, while the complementary DNA (cDNA) conjugated with AgNPs-decorated silicon wafer (AgNPs@Si) was used as SERS substrate. As acetamiprid molecule could specifically combine with aptamer, preventing the formation of MMBN-AuNPs-aptamer-cDNA-AgNPs@Si (expressed as "Au-AgNPs@Si") hybrid through DNA sequence linking, Raman signal intensities of MMBN in Au-AgNPs@Si decreased when the concentration of acetamiprid increased. Under the optimum assay condition, the proposed method displayed a linear response for acetamiprid detection in the range of 25-250 nM with a low detection limit of 6.8 nM. Finally, the developed aptasensor was successfully used to determine acetamiprid content in apple juice. Accordingly, this novel anti-interference SERS aptasensor could be a promising acetamiprid sensor for food safety assurance.

A facile SERS strategy for quantitative analysis of trace glucose coupling glucose oxidase and nanosilver catalytic oxidation of tetramethylbenzidine

Highly stable, SERS active and catalytic nanosilver sol (AgNP) was synthesized under the exposure of light wave, using AgNO₃ as precursor and sodium citrate as reducer. Under the conditions of pH 7.0 NaH₂PO₄-Na₂HPO₄ buffer solution (PBS), the glucose can be catalyzed by glucose oxidase to produce H₂O₂ specifically. Based on the nanocatalyst and SERS substrate of AgNP, H₂O₂ can oxidize the 3,3',5,5'-tetramethylbenzidine (TMB) quickly to form a blue oxidation product (TMB_ox) that induced the AgNPs aggregation, which exhibited a strong SERS signal at 1606 cm^-1. As the concentration of glucose increases, the TMB_ox molecular probes and AgNPs aggregation increase, and the intensity of SERS peak at 1606 cm^-1 increase linearly. Thus, a new SERS strategy for quantitative analysis of 0.33-6.67 μmol/L glucose was developed, with a detection limit of 0.035 μmol/L, coupled the catalysis of nanosilver with glucose oxidase, and label-free molecular probe of TMB_ox.