Fluorescence turn-on sensing of trace cadmium ions based on EDTA-etched CdTe@CdS quantum dot

An "off-on" fluorescent nanosensor for the detection of cadmium ions based on APDC-etched CdTe/CdS/SiO2 quantum dots

In this study, we have developed a novel fluorescent "OFF-ON" quantum dots (QDs) sensor based on CdTe/CdS/SiO2 cores. Ammonium pyrrolidine dithiocarbamate (APDC), ethylenediamine tetraacetic acid (EDTA), and 1,10-phenanthroline (Phen) served as potential chemical etchants. Among these three etchants, APDC exhibited the most pronounced quenching effect (94.06%). The APDC-etched CdTe/CdS/SiO2 QDs demonstrated excellent optical properties: the fluorescence of the APDC-etched CdTe/CdS/SiO2 QDs system (excitation wavelength: 365 nm and emission wavelength: 622 nm) was significantly and selectively restored upon the addition of cadmium ions (Cd2+) (89.22%), compared to 15 other metal ions. The linear response of the APDC-etched CdTe/CdS/SiO2 QDs was observed within the cadmium ion (Cd2+) concentration ranges of 0-20 μmol L-1 and 20-160 μmol L-1 under optimized conditions (APDC: 300 μmol L-1, pH: 7.0, reaction time: 10 min). The detection limit (LOD) of the APDC-etched CdTe/CdS/SiO2 QDs for Cd2+ was 0.3451 μmol L-1 in the range of 0-20 μmol L-1. The LOD achieved by the QDs in this study surpasses that of the majority of previously reported nanomaterials. The feasibility of using APDC-etched CdTe/CdS/SiO2 QDs for Cd2+ detection in seawater, freshwater, and milk samples was verified, with average recoveries of 95.27%-110.68%, 92%-106.47%, and 90.73%-111.60%, respectively, demonstrating satisfactory analytical precision (RSD ≤ 8.26).

Ultrasensitive Cd2+ detection based on biomimetic magneto-Au nano-urchin SERS chip fabricated using a 3D printed magnetic mold

Cadmium is a representative carcinogenic heavy metal. Because of the long biological half-life of cadmium, it is critical to prevent and detect cadmium inflow into the body. In this study, we developed the biomimetic magneto-gold nano-urchin (MGNU)-based surface-enhanced Raman scattering (SERS) chip for ultrasensitive detection of cadmium. The MGNU SERS chip was facilely fabricated using three-dimensional (3D) printed magnetic molds. The 3D printed magnetic molds were designed for contributing to (1) making hydrophobic/hydrophilic areas and (2) magnetic SERS enhancement by attracting the MGNUs. To validate the performance of the MGNU SERS chip, we conducted electromagnetic simulations and measurements of SERS efficiencies. Consequently, we detected cadmium ions up to 1.33 pM in distilled water. Moreover, we succeeded to detect cadmium ions in the real environmental samples up to 2.76 pM in the tap water and 14.21 pM in the human blood plasma, respectively. The MGNU SERS chip is a powerful SERS substrate that can be used in various spectrometer-based sensing platforms.

Aggregation-caused dual-signal response of gold nanoclusters for ratiometric optical detection of cysteine

Designing ratiometric sensors for cysteine (Cys) monitoring with high accuracy is of great significance for disease diagnosis and biomedical studies. The current ratiometric methods mainly rely on multiplex probes, which not only complicates the operation but also increases the cost, making it difficult for quantitative Cys detection in resource-limited areas. Herein, one-pot prepared gold nanoclusters (Au NCs) that glow red fluorescent were synthesized by employing glutathione as the stabilizer and reducing agent. When Fe3+ is present with Au NCs, the fluorescence is quenched and the scattering is strong because of the aggregation of Au NCs. With introduction of Cys, Cys can efficiently compete with glutathione-modified Au NCs for Fe3+, which leads to increase of fluorescence and decrease of scattering. The ratiometric determination of Cys can be thereby realized by collecting the fluorescence and SRS spectrum simultaneously. The linear range for Cys was 5-30 µM with a detection limit of 1.5 µM. In addition, the sensing system exhibits good selectivity for Cys and shows potential application in biological samples.

Sensitive detection of cadmium ions based on a quantum-dot-mediated fluorescent visualization sensor

A sensitive ratiometric fluorescent sensor for detecting cadmium ions (Cd2+) was constructed based on carbon quantum dots (CQDs)/CdTe quantum dots (CdTe QDs). Red fluorescence (from CdTe QDs) played the role of the signal response and blue fluorescence (from CQDs) served as a reference probe without a color change. The fluorescent sensor showed high selectivity and sensitivity to Cd2+ with a limit of detection (LOD) of 0.018 μM and a range from 0.1 μM to 23 μM. The proposed method was successfully applied to the determination of Cd2+ in real rice samples. In addition, a fluorescent sensor integrated with a smartphone platform was further designed for the visualized and quantitative detection of Cd2+. This work might extend the range of visualization analysis strategies and provide new insights into the rapid quantitative, portable and sensitive detection of Cd2+ in real-time and on-site applications.

Detection of Cd2+ in Aqueous Solution by the Fluorescent Probe of CdSe/CdS QDs Based on OFF–ON Mode

The detection of heavy metals in aqueous solutions has always attracted much attention from all over the world. A fluorescent probe of CdSe/CdS core-shell quantum dots (QDs) was designed to detect trace Cd²⁺ in aqueous solutions using the OFF–ON mode rapidly and efficiently, likely based on adsorption and desorption reactions between ethylenediaminetetraacetic acid disodium salt (EDTA) and CdSe/CdS QDs. In the OFF mode, the optical shielding function of EDTA results in fluorescence quenching owing to the strong adsorption ability of EDTA with Cd²⁺ on the sites of CdSe/CdS QDs surface. In the ON mode, the introduction of Cd²⁺ promotes the desorption of EDTA from the EDTA-CdSe/CdS QDs and restores the fluorescence intensity. There were two linear response ranges which were 0.1–20 µmol/L and 20–90 µmol/L for the EDTA-CdSe/CdS system to detect Cd²⁺. The detection limit was 6 nmol/L, and the standard deviation was below 4% for the detection of Cd²⁺ concentration in tap water.

Eu doped Ti3C2 quantum dots to form a ratiometric fluorescence platform for visual and quantitative point-of-care testing of tetracycline derivatives

Antibiotic residues have become a public health issues, the fast detection of tetracycline (Tc) in the environment is urgently required. In this work, Ti₃C₂ quantum dots (Ti₃C₂ QDs) and Europium ions jointly constructed a ratiometric fluorescence (FL) platform for the detection of Tc, based on synergistic impact of the Foster Resonance Energy Transfer (FRET) from Ti₃C₂ QDs to Eu³⁺ ions and the Antenna Effect (AE) between Tc and Eu³⁺ ions. And we proposed a ratiometric FL platform for detecting Tc with good linear response range (100-1000 uM) and low detection limit (48.79 nM). Meanwhile, we applied this platform to detect a serious of β-diketone ligands of Eu³⁺ ions, demonstrating the platform's versatility for this category of chemical. Furthermore, based on the color changes of QDs@Eu³⁺ from blue to red at 365 nm ultraviolet light, an intelligent detection smart device was built for the visual semi-quantitative detection of Tc in actual samples. We proved the applicability of the device in complicated samples and the potential for rapid, sensitive, intuitive and point-of-care detection in the field of environment, food, pharmaceutical and agriculture.

Development of QDs-based nanosensors for heavy metal detection: A review on transducer principles and in-situ detection

Heavy metal pollution has severe threats to the ecological environment and human health. Thus, it is urgent to achieve the rapid, selective, sensitive and portable detection of heavy metal ions. To overcome the defects of traditional methods such as time-consuming, low sensitivity, high cost and complicated operation, QDs (Quantum dots)-based nanomaterials have been used in sensors to significantly improve the sensing performance. Due to their excellent physicochemical properties, high specific surface area, high adsorption and reactive capacity, nanomaterials could act as potential probes or offer enhanced sensitivity and create a promising nanosensors platform. In this review, the rapidly advancing types of QDs for heavy metal ions detection are first summarized. Modified with ligands, nanomaterials, or biomaterials, QDs are assembled on sensors by the interaction of electrostatic adsorption, chemical bonding, steric hindrance, and base-pairing. The stability of QDs-based nanosensors is improved by doping the elements to QDs, providing the reference substance, optimizing the assemble strategies and so on. Then, according to transducer principles, the two most typical sensor categories based on QDs: optical and electrochemical sensors are highlighted to be discussed. In the meanwhile, portable devices combining with QDs to adapt the practical detection in complex situations are summarized. The deficiencies and future challenges of QDs in toxicity, specificity, portability, multi-metal co-detection and degradation during the detection are also pointed out. In the end, the development trends of QDs-based nanosensors for heavy metal ions detection are discussed. This review presents an overall understanding, recent advances, current challenges and future outlook of QDs-based nanosensors for heavy metal detection.

A phosphorescence resonance energy transfer-based "off-on" long afterglow aptasensor for cadmium detection in food samples

Cadmium contamination is a severe food safety risk for human health. Herein, a long afterglow "off-on" phosphorescent aptasensor was developed based on phosphorescence resonance energy transfer (PRET) for the detection of Cd²⁺ in complex samples which minimizes the interference of background fluorescence. In this scheme, initially the phosphorescence of Cd²⁺-binding aptamer conjugated long afterglow nanoparticles (Zn₂GeO₄:Mn) was quenched by black hole quencher 1 (BHQ₁) modified complementary DNA. Upon encountering of Cd²⁺, the aptamer interacted with Cd²⁺ and the complementary DNA with BHQ₁ was released, leading to phosphorescence recovery. The content of Cd²⁺ could be quantified by the intensity of phosphorescence recovery with 100 μs gate time (which eliminated the sample autofluorescence) with a linear relationship between 0.5 and 50 μg L^-1 and a limit of detection (LOD) of 0.35 μg L^-1. This method was successfully demonstrated for Cd²⁺ detection in drinking water and yesso scallop samples. The "off-on" phosphorescent aptasensor based on PRET of long afterglow nanomaterials could be an effective tool for Cd²⁺ detection in food samples.

A smartphone-integrated ratiometric fluorescence sensor for visual detection of cadmium ions

A novel fluorescence sensing platform was fabricated for visual detection of cadmium ions (Cd²⁺) with excellent stability and portability. In this protocol, dual-emission ratiometric fluorescence probe were constructed based on silicon oxide-coated copper nanoclusters (CuNCs@SiO₂) as a signal reference and cadmium telluride quantum dots (CdTe QDs) as signal response, thereby greatly improving the accuracy of test results. The level of Cd²⁺ can be reported within a wide linear range from 0.010 mg·L^-1 to 2.0 mg·L^-1 with a sensitive detection limit of 1.1 μg·L^-1 (2.75 μg·kg^-1) and a quick sample-to-answer monitoring time of 6 min, which was quite qualified for regularly monitoring Cd²⁺. Moreover, aiming to attain portable analysis, the smartphone as colorimetric reader and analyzer were also utilized for rapidly analyzing Cd²⁺ by capturing the change in fluorescence color. Additionally, benefiting from the strong combination of 1, 10-phenanthroline (Phen) and Cd²⁺, the fluorescence probe showed excellent anti-interference activities for Cd²⁺ assay in complex oyster matrix. Overall, the sensing platform had significant stability, specificity and sensitivity, offering a promising potential for conveniently evaluating the quality of marine bivalves polluted with Cd²⁺.

Fluorescence turn-on sensing of L-cysteine based on FRET between Au-Ag nanoclusters and Au nanorods

The applications of metallic nanoclusters and nanoparticles in biological sensing have attracted special attention owing to their optical interaction based on fluorescence and surface plasmon resonance (SPR). In this work, we designed a fluorescent nanoprobe for the determination of L-cysteine (L-Cys) based on fluorescence resonance energy transfer (FRET) from gold‑silver bimetallic nanoclusters (Au-Ag NCs) to gold nanorods (AuNRs). Firstly, the negatively charged Au-Ag NCs protected by bovine serum albumin (BSA) are directly adsorbed on the surface of the positively charged AuNRs through electrostatic interaction, and the FRET effect leads to distinct fluorescence quenching of Au-Ag NCs at 615nm. The SPR wavelength of AuNRs is dependent on the aspect ratio, so the SPR of AuNRs could be tuned to have a better spectral overlap with fluorescence of Au-Ag NCs, which enhances the fluorescence quenching effect. Because the SH group of L-Cys has an affinity with gold, the addition of L-Cys can result in the release of Au-Ag NCs from the surface of AuNRs via forming AuS bonds. Thus, the introduction of L-Cys could effectively restore the fluorescence emission of the AuNRs/Au-Ag NCs system because of the restraint of FRET effect. Under the optimized conditions, the fluorescence recovery of AuNRs/Au-Ag NCs probe exhibits a linear response to L-Cys concentration ranging from 5 to 100μM, and the corresponding theoretical detection limit (LOD) is 1.73μM. Meanwhile, this method displays excellent sensitivity and selectivity for L-Cys over other amino acids, and it has been successfully applied to detect L-Cys in real samples.

Ligand induced switching of the band alignment in aqueous synthesized CdTe/CdS core/shell nanocrystals

CdTe/CdS core/shell quantum dots (QDs) are formed in aqueous synthesis via the partial decomposition of hydrophilic thiols, used as surface ligands. In this work, we investigate the influence of the chemical nature (functional group and chain length) of the used surface ligands on the shell formation. Four different surface ligands are compared: 3-mercaptopropionic acid, MPA, thioglycolic acid, TGA, sodium 3-mercaptopropanesulfonate, MPS, and sodium 2-mercaptoethanesulfonate, MES. The QD growth rate increases when the ligand aliphatic chain length decreases due to steric reasons. At the same time, the QDs stabilized with carboxylate ligands grow faster and achieve higher photoluminescence quantum yields compared to those containing sulfonate ligands. The average PL lifetime of TGA and MPA capped QDs is similar (≈20 ns) while in the case of MPS shorter (≈15 ns) and for MES significantly longer (≈30 ns) values are measured. A detailed structural analysis combining powder X-ray diffraction, and X-ray photoelectron spectroscopy (XPS) indicates the existence of two novel regimes of band alignment: in the case of the mercaptocarboxylate ligands the classic type I band alignment between the core and shell materials is predominant, while the mercaptosulfonate ligands induce a quasi-type II alignment (MES) or an inverted type I alignment (MPS). Finally, the effect of the pH value on the optical properties was evaluated: using a ligand excess in solution allows achieving better stability of the QDs while maintaining high photoluminescence intensity at low pH.