Ligand free surface of CdS nanoparticles enhances the energy transfer efficiency on interacting with Eosin Y dye - Helping in the sensing of very low level of chlorpyrifos in water

Exploring Various Photochemical Processes in Optical Sensing of Pesticides by Luminescent Nanomaterials: A Concise Discussion on Challenges and Recent Advancements

Food safety is a burning global issue in this present era. The prevalence of harmful food additives and contaminants in everyday food is a significant cause for concern as they can adversely affect human health. More particularly, among the different food contaminants, the use of excessive pesticides in agricultural products is severely hazardous. So, the optical detection of residual pesticides is an effective strategy to counter the hazardous effect and ensure food safety. In this perspective, nanomaterials have played a leading role in defending the open threat against food safety instigated by the reckless use of pesticides. Now, nanomaterial-based optical detection of pesticides has reached full pace and needs an inclusive discussion. This Review covers the advancement of photoprocess-based optical detection of pesticides categorically using nanomaterials. Here, we have thoroughly dissected the photoprocesses (aggregation and aggregation-induced emission (AIE), charge transfer and intramolecular charge transfer (ICT), electron transfer and photoinduced electron transfer (PET), fluorescence resonance energy transfer (FRET), hydrogen bonding, and inner filter effect) and categorically demarcated their significant role in the optical detection of pesticides by luminescent nanomaterials over the last few years.

Intimate coupling of gC3N4/CdS semiconductor on eco-friendly biocarrier loofah sponge for enhanced detoxification of ciprofloxacin

Ciprofloxacin is one of the antibiotics predominantly used to treat bacterial infections, however excess usage, and release of antibiotic from various sources to the environment can cause severe risks to human health since it was considered as emerging pollutant. This study deals with the intimately coupled photocatalysis and biodegradation (ICPB) of ciprofloxacin using gC3N4/CdS photocatalytic semiconductor and eco-friendly renewable loofah sponge as biocarrier in the ICPB. The photocatalyst gC3N4/CdS was prepared and their synergistic photocatalytic degradation of ciprofloxacin were assessed and the results shows that gC3N4/CdS (20%) exhibit 79% degradation efficiency in 36 h. Further ICPB exhibited enhanced ciprofloxacin degradation 95% at 36 h. The 62.4% and 81.1% of chemical oxygen demand (COD) removal was obtained in the photocatalysis and ICPB respectively. Enhanced degradation of ciprofloxacin and COD removal was due to the synergetic photoelectrons generated from the gC3N4/CdS (20%) transferred to the bacterial communities which intensely mineralize the degradation products produced from the photocatalysis process. Furthermore, production of hydroxyl •OH and superoxide radical anion O2• were identified actively involved in the degradation of ciprofloxacin. The biocarrier loofah sponge provided favourable environment to the bacterial communities for the formation of biofilm and production of extracellular polymeric substances (EPS). Excess quantity of EPS production in the ICPB helps in the prevention of toxicity of photocatalyst to bacterial communities as well as facilitate the extracellular electron transfer process. This work provides a novel path for enhanced degradation of ciprofloxacin using eco-friendly, low cost and renewable biocarrier loofah sponge in the ICPB system.

A portable smartphone-assisted digital image fluorimetry for analysis of methiocarb pesticide in vegetables: Nitrogen-doped carbon quantum dots as a sensing probe

The increasing use of pesticides in the agriculture fields strengthen the crop production to meet the needs of increasing population. The residues in water and food materials cause several health hazards. Herein, nitrogen-doped carbon quantum dot (N-CQDs) is designed for determination of methiocarb pesticide in vegetables by fluorescent paper sensor and compared the results with fluorimetry. The fluorescent paper-based detection is performed by recording the change in fluorescence of N-CQDs with introduction of methiocarb using smartphone and ImageJ software. Good linear range was acquired for analysis of methiocarb from 10 to 1000 μgL^-1 with a low detection limit (LOD) of 3.5 μgL^-1 in fluorimetry; and 700-10,000 μgL^-1 with a LOD of 500 μgL^-1 in fluorescent paper sensor. A better recovery from 92.0 to 95.4% illustrating the selectivity of both methods for analysis of methiocarb in vegetables. Thus, the advantage of using N-CQDs as a fluorescent sensor for analysis of methiocarb in vegetables is instrument free, portable and user-friendly.

Optical and structural properties of Ni-doped Cd0.9Zn0.1S nanostructures

The present work describes the synthesis of Cd0.9Zn0.1S and Cd0.87Zn0.1Ni0.03S by chemical co-precipitation method. The XRD profile proved the cubic crystal structure of the samples without any impurity related phases. The reduced size from 63 to 51 Å has been discussed by Ni addition in Cd0.87Zn0.1Ni0.03S structure. The noticed anomalous optical studies and the elevated transmittance at Ni doped sample suggested them for the fabrication of efficient opto-electronic devices. The energy gap reduction during the substitution of Ni = 3% is explained by the generation of extra energy levels associated with defects within the two bands.

Construction of S-scheme CdS/g-C3N4 nanocomposite with improved visible-light photocatalytic degradation of methylene blue

Within moderate band gap, g-C₃N₄ and CdS are both promising visible light driven photocatalysts. However, their intrinsic high recombination rate of photo-induced electron-hole pairs along with the poor susceptibility in photocorrosion of CdS is main limitations hindering their practical application. In this study, the CdS/g-C₃N₄ composites with various weight ratios of CdS to g-C₃N₄ were solvothermal prepared from the dispersion of components, g-C₃N₄ and CdS, in ethanol. The physicochemical characterizations demonstrate the success in the fabrication of well-dispersed CdS nanoparticles in the g-C₃N₄ matrix. The enhanced photocatalytic activity of the g-C₃N₄/CdS composite over the degradation of methylene blue under visible light was ascribed to the effective photo-induced electron-hole separation via the step scheme (S-scheme) pathway in which the main contribution of high oxidative hydroxyl radicals (^•OH) was demonstrated. Furthermore, via S-scheme model, we also clarify the depletion of photo-induced holes on CdS which is ascribed as the reason for improvement in resistance to photocorrosion of composites.

Enhanced Photo-Catalytic and Antibacterial Properties of Ni-Doped Cd0.9Zn0.1S Nanostructures

The present work describe the synthesis of Cd0.9Zn0.1S and Cd0.87Zn0.1Ni0.03S nanostructures by chemical co-precipitation method. The XRD profile proved the cubic crystal structure of the samples without any impurity related phases. The reduced size from 63 to 51 Å and the dissimilarities in lattice parameters and micro-strain has been discussed by Ni addition in Cd0.87Zn0.1Ni0.03S structure. The noticed anomalous optical studies and the elevated transmittance at Ni doped sample suggested them for the fabrication of efficient opto-electronic devices. The energy gap reduction during the substitution of Ni = 3% is explained by the generation of extra energy levels associated with defects within the two bands. The release of additional charge carriers, improved optical property, reduced particle size and more defect generation are responsible for the enhanced photo-catalytic performance of Ni doped Cd0.9Zn0.1S. The enhanced anti-bacterial capacity in Cd0.87Zn0.1Ni0.03S is described by the collective response of reduced particle size and higher reactive oxygen species (ROS) like O2 ⋅- , H2O2 and OH ⋅ generating capacity.

Fluorescence-Based Sensing of Pesticides Using Supramolecular Chemistry

The detection of pesticides in real-world environments is a high priority for a broad range of applications, including in areas of public health, environmental remediation, and agricultural sustainability. While many methods for pesticide detection currently exist, the use of supramolecular fluorescence-based methods has significant practical advantages. Herein, we will review the use of fluorescence-based pesticide detection methods, with a particular focus on supramolecular chemistry-based methods. Illustrative examples that show how such methods have achieved success in real-world environments are also included, as are areas highlighted for future research and development.

Nanomaterial-Enabled Sensors and Therapeutic Platforms for Reactive Organophosphates

Unintended exposure to harmful reactive organophosphates (OP), which comprise a group of nerve agents and agricultural pesticides, continues to pose a serious threat to human health and ecosystems due to their toxicity and prolonged stability. This underscores an unmet need for developing technologies that will allow sensitive OP detection, rapid decontamination and effective treatment of OP intoxication. Here, this article aims to review the status and prospect of emerging nanotechnologies and multifunctional nanomaterials that have shown considerable potential in advancing detection methods and treatment modalities. It begins with a brief introduction to OP types and their biochemical basis of toxicity followed by nanomaterial applications in two topical areas of primary interest. One topic relates to nanomaterial-based sensors which are applicable for OP detection and quantitative analysis by electrochemical, fluorescent, luminescent and spectrophotometric methods. The other topic is directed on nanotherapeutic platforms developed as OP remedies, which comprise nanocarriers for antidote drug delivery and nanoscavengers for OP inactivation and decontamination. In summary, this article addresses OP-responsive nanomaterials, their design concepts and growing impact on advancing our capability in the development of OP sensors, decontaminants and therapies.

A resonance Rayleigh scattering and fluorescence quenching dual-channel sensor for sensitive detection of chitosan based on Eosin Y

The sensitive chitosan (CTS) detection methods based on the resonance Rayleigh scattering (RRS) quenching method and fluorescence quenching of Eosin Y were put forward. In the HAC-NaAC buffer solution, Eosin Y interacted with Triton X-100 to generate the binary complex which served as the RRS spectral probe. When CTS was interacted with the binary complex, the RRS intensity decreased with the increase of CTS. At the same time, the fluorescence intensity of Eosin Y decreased in the presence of Triton X-100, and the fluorescence intensity of "Eosin Y+Triton X-100" system further decreased when CTS was added. So it was further proved that there was a forming complex in "Eosin Y+Triton X100+CTS" system. The interaction was characterized by zeta potential, RRS, fluorescence spectrum, and UV-Vis spectroscopy. Under optimal conditions, there was a good linear relationship between the RRS decreased intensity (ΔI) and the concentration of CTS in the range of 0.05-1.30 μg/mL, with a regression equation of ΔI = 1325c + 73.66 and correlation coefficient (R²) of 0.9907. The detection limit was 0.0777 μg/mL. Likewise, the linear range of the fluorescence quenching was 0.03-1.30 μg/mL; the regression equation was ΔF = 1926c + 294.0 with R² = 0.9800 under fluorescence quenching. The detection limit was 0.0601 μg/mL. Therefore, the dual-channel sensor for the determination of CTS was applied to the health products, and the results were satisfactory. The t test result showed that there was no statistical difference between the two methods.

Adsorption of toxic dye Eosin Y from aqueous solution by clay/carbon composite derived from spent bleaching earth

The environmentally friendly clay/carbon composite (SBE/C) was prepared by one-step pyrolysis under N₂ atmosphere at 700°C of spent bleaching earth (SBE) from the industrial waste of the refined oil industry. SBE/C was tested to remove anionic dye Eosin Y from aqueous water. The results revealed that SBE/C had larger specific surface area than SBE, and the equilibrium adsorption capacity of SBE/C (11.15 mg/g) was about 3 times than that of SBE (4.04 mg/g). The adsorption process was found to be exothermic and spontaneous. The adsorption capacity of SBE/C was independent on pH (5-12), and exhibits satisfactorily recyclable performance. Combined with characterization analysis, the adsorption mechanism likely includes electrostatic interaction, hydrogen bonding, hydrophobic interaction, halogen bonding, and π-π interaction. Overall, this exploration of SBE/C might open a window to the design of an efficient and low-cost adsorbent for Eosin Y dye elimination from wastewater. PRACTITIONER POINTS: The resource utilization of industrial waste SBE was achieved. SBE/C was synthesized and tested to adsorb Eosin Y for the first time. SBE/C had characteristics with porous structure and large surface area. pH had little effect on adsorption capacity of SBE/C for Eosin Y. SBE/C exhibited potential for dye elimination from wastewater.

Enhancement of antibacterial activity of synthesized ligand-free CdS nanocrystals due to silver doping

Recently, different nanocrystals have been reported to be the alternative, optimistic, and novel antimicrobial agent against the many antibiotic-resistant bacteria. Here, ligand-free CdS and Ag-doped CdS (Ag/CdS) nanocrystals have been synthesized by chemical methods for the study of the antimicrobial activity on Escherichia coli and Staphylococcus aureus by Kirby-Bauer diffusion method to see the effect against Gram-positive and Gram-negative bacteria. These prepared nanocrystals have been characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). TEM and SEM images confirm the spherical morphology of both the sample and the respective XRD patterns indicate polycrystalline nature having a cubic zinc blende structure. Antibacterial activities have been tested with CdS and Ag/CdS, considering concentrations ranging from 10 to 200 μg/ml. After 24 h of incubation, the zone of inhibition (ZOI) is measured for each concentration, which shows that both the nanocrystals are ineffective against E. coli but much effective against S. aureus at this low concentration range. Furthermore, Ag/CdS nanocrystals have been found to show much more ZOI than CdS. Differences in the antibacterial activity can be due to the presence of different cell wall in E. coli and S. aureus.

Fluorescent aptasensing of chlorpyrifos based on the assembly of cationic conjugated polymer-aggregated gold nanoparticles and luminescent metal–organic frameworks

A fluorescent aptasensor of chlorpyrifos based on terbium(iii) based on metal–organic frameworks and PDDA-aggregated-gold nanoparticles.

Eosin Y sensitized BiPO4 nanorods for bi-functionally enhanced visible-light-driven photocatalysis

Eosin Y sensitized BiPO₄ nanorods enhanced the degradation efficiency of MB and 2,4-DCP compared to pristine BiPO₄ by 46.7 and 10.5 fold with a 100% mineralization rate.