Photophysics and luminescence quenching of carbon dots derived from lemon juice and glycerol

Carbon Dots: Synthesis, Characterizations, and Recent Advancements in Biomedical, Optoelectronics, Sensing, and Catalysis Applications

Carbon nanodots (CNDs), a fascinating carbon-based nanomaterial (typical size 2-10 nm) owing to their superior optical properties, high biocompatibility, and cell penetrability, have tremendous applications in different interdisciplinary fields. Here, in this Review, we first explore the superiority of CNDs over other nanomaterials in the biomedical, optoelectronics, analytical sensing, and photocatalysis domains. Beginning with synthesis, characterization, and purification techniques, we even address fundamental questions surrounding CNDs such as emission origin and excitation-dependent behavior. Then we explore recent advancements in their applications, focusing on biological/biomedical uses like specific organelle bioimaging, drug/gene delivery, biosensing, and photothermal therapy. In optoelectronics, we cover CND-based solar cells, perovskite solar cells, and their role in LEDs and WLEDs. Analytical sensing applications include the detection of metals, hazardous chemicals, and proteins. In catalysis, we examine roles in photocatalysis, CO2 reduction, water splitting, stereospecific synthesis, and pollutant degradation. With this Review, we intend to further spark interest in CNDs and CND-based composites by highlighting their many benefits across a wide range of applications.

Ganoderma lucidum bran-derived blue-emissive and green-emissive carbon dots for detection of copper ions

Ganoderma lucidum bran (GB) has a broad application prospect in the preparation of activated carbon, livestock feed, and biogas, but the preparation of carbon dots (CDs) from GB has never been reported. In this work, GB was applied as a carbon source and nitrogen source to prepare both blue fluorescent CDs (BCDs) and green fluorescent CDs (GCDs). The former were prepared at 160 °C for 4 h by a hydrothermal approach, while the latter were acquired at 25 °C for 24 h by chemical oxidation. Two kinds of as-synthesized CDs exhibited unique excitation-dependent fluorescence behavior and high fluorescent chemical stability. Based on the fantastic optical behavior of the CDs, they were utilized as probes for fluorescent determination of copper ions (Cu²⁺). In the range of 1-10 μmol L^-1, the fluorescent intensity of BCDs and GCDs decreased linearly with the increase of Cu²⁺ concentration; the linear correlation coefficient reached 0.9951 and 0.9982, and the limit of detection (LOD) was 0.74 and 1.08 μmol L^-1, respectively. In addition, these CDs remained stable in 0.001-0.1 mmol L^-1 salt solutions; BCDs were more stable in the neutral pH range, but GCDs were more stable in neutral to alkaline conditions. The CDs prepared from GB are not only simple and low-cost, but also can realize the comprehensive utilization of biomass.

Red-emitting carbon dots aggregates-based fluorescent probe for monitoring Cu2

R-CDAs have been synthesized in a one-pot solvothermal procedure starting from 3,4-diaminobenzoic acid in an acidic medium. Transmission electron microscopy (TEM) revealed that R-CDAs nanoparticles exhibited a much larger diameter of 7.2-28.8 nm than traditional monodisperse carbon dots. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) revealed the presence of polar functional groups (hydroxyl, amino, carboxyl) on the surface of R-CDAs. Upon excitation with visible light (550 nm), R-CDAs emit stable, red fluorescence with a maximum at 610 nm. Under the optimum conditions, Cu²⁺ ions quench the fluorescence of this probe, and the signal is linear in a concentration range of copper ions between 5 and 600 nM with the detection limit of only 0.4 nM. Recoveries from 98.0 to 105.0% and relative standard deviations (RSD) from 2.8 to 4.5% have been obtained for detection of Cu²⁺ in real water samples. Furthermore, the R-CDAs fluorescent probe showed negligible cytotoxicity toward HeLa cells and good bioimaging ability, suggesting its potential applicability as a diagnostic tool in biomedicine.

A Review on Carbon Dots: Synthesis, Characterization and Its Application in Optical Sensor for Environmental Monitoring

The development of carbon dots (CDs), either using green or chemical precursors, has inevitably led to their wide range application, from bioimaging to optoelectronic devices. The reported precursors and properties of these CDs have opened new opportunities for the future development of high-quality CDs and applications. Green precursors were classified into fruits, vegetables, flowers, leaves, seeds, stem, crop residues, fungi/bacteria species, and waste products, while the chemical precursors were classified into acid reagents and non-acid reagents. This paper quickly reviews ten years of the synthesis of CDs using green and chemical precursors. The application of CDs as sensing materials in optical sensor techniques for environmental monitoring, including the detection of heavy metal ions, phenol, pesticides, and nitroaromatic explosives, was also discussed in this review. This profound review will offer knowledge for the upcoming community of researchers interested in synthesizing high-quality CDs for various applications.

Ion exchange membrane optimized light-driven photoelectrochemical unit for efficiency simultaneous organic degradation and metal recovery from the mine wastewater

Resource recovery from wastewater is a promising and challenging topic. Herein, a well-designed ion exchange membrane optimized light-driven photoelectrochemical unit (MPECS) was constructed to reduce the effect of inorganic salt on the photoelectrochemical performance of the photoanode. TiO₂/carbon dots/WO₃ (TCDW) photoanode with the indirect Z-scheme heterojunction structure was successfully fabricated, achieving a strong light harvest performance (10.82%) and a high photocurrent density (5.39 mA/cm²). For the simulated solution (0.01 M phenol and 0.01 M CuSO₄), the phenol degradation and Cu recovery efficiencies reached 99.67% and 62.20% in 60 min, respectively, and the corresponding photoelectric conversion efficiency (PECE) reached 4.64% in the TCDW/Pt-based MPECS. For the actual Cu-laden mine wastewater, over 98% of inorganic salt was removed. Compared to the traditional photoelectrochemical system (PECS), the COD removal and Cu recovery efficiencies were further improved by 23.77% and 49.41% in MPECS, respectively. The results exhibited a promising light-driven mine wastewater treatment technology.

Heavy metal ion detection using green precursor derived carbon dots

The discovery of carbon dots (CDs) for environmental remediation has gained awareness because of the diverse economically viable and environmental friendly green precursors generated from biowastes and biomass compared to the toxic inorganic quantum dots and CDs prepared from chemical precursors. This review presents the recent progress in green CDs, including their synthesis methods and sensing applications for the detection of heavy metal ions such as Iron (III), Mercury (II), Copper (II), Chromium (VI), Lead (II), Arsenic (III), Cobalt (II), Aluminum (III), Silver (I), and Gold (III) which are prominent environmental pollutants. The comparison based on selectivity, sensitivity, quantum yield, detection limit, linear concentration range, and sensing mechanisms are also reported. This review also covers the performance of doped green CDs using heteroatoms, toward the detection of heavy metal ions. Apart from the future perspectives, this review provides a general guide to use such environmental friendly CDs to detect harmful pollutants.

Orange-emissive N,S-co-doped carbon dots for label-free and sensitive fluorescence assay of vitamin B12

N,S-CDs with orange fluorescent emission were synthesized via a hydrothermal method using o-phenylenediamine and thiourea. A novel fluorometric method for the determination of VB12 based on the IFE was established.

Dietary polyphenols inhibit plasma protein arabinosylation: Biomolecular interaction of genistein and ellagic acid with serum albumins

The mode of interaction of polyphenolic compounds like genistein (GTN) and ellagic acid (EGA) with human and bovine serum albumin (HSA and BSA, respectively) was found to differ significantly. Stern-Volmer (SV) analysis of the fluorescence quenching data revealed that the binding strength of EGA (1.9 ± 0.09 × 10⁵ M^-1) to HSA is about one order of magnitude higher than GTN (2.24 ± 0.06 × 10⁴ M^-1). While the static quenching of HSA fluorescence was found to proceed through simple Stern-Volmer (SV) mechanism, a quenching sphere-of-action model was indispensable for BSA. Temperature dependent fluorescence along with a series of other biophysical experiments and ensemble docking calculation revealed that EGA and GTN bind to the serum proteins primarily through the entropy driven process. The α-helical content and the microenvironment near Trp residue of HSA and BSA did not show any appreciable change due to the binding of either GTN or EGA. Interestingly, both GTN and EGA were found to inhibit the formation of advanced glycated end (AGE) product of serum proteins up to the extent of 70-90% within 12-24 h. Relatively moderate binding propensity along with the anti-glycation ability of the polyphenols confirmed that GTN and EGA can be used either as an alternative or towards development of suitable drugs in the prevention of many diabetic-related complications.

Furfural and organic acid targeted carbon dot sensor array for the accurate identification of Chinese baijiu

Baijiu quality control has always been a major challenge for researchers. In this paper, taking furfural which is closely related to baijiu brewing process and organic acids related to baijiu fermentation process and microorganism types as the main discriminating factors, a carbon dot (CDs) sensor array targeting furfural and organic acids was constructed to identify 41 kinds of baijiu. Through the fluorescence response investigation of CDs synthesized by isomers of benzenediol, aminophenol, and phenylenediamine to different baijiu, two CDs synthesized by meta-benzene substitutions containing -NH₂ were selected to build a fluorescence sensor array. Due to the aggregation-induced enhancement effect between furfural and the CDs, and the protonation of organic acid and the CDs, different fluorescence changes were observed, the sensor array combined with partial least squares regression could quantitatively analyze furfural and organic acids. What is more, semi-quantitative analysis of furfural and lactic acid in baijiu was performed. Owing to the interaction of the two CDs with furfural and organic acids in baijiu, the sensor array could accurately identify different baijiu through linear discriminant analysis. This sensor array has potential applications in the quantitative analysis of flavor substances in other alcoholic beverages, moreover, this method could provide a quick response and practical tool for real-time quality control monitoring in the baijiu industry.

A Comparative Study of Top-Down and Bottom-Up Carbon Nanodots and Their Interaction with Mercury Ions

We report a study of carbon dots produced via bottom-up and top-down routes, carried out through a multi-technique approach based on steady-state fluorescence and absorption, time-resolved fluorescence spectroscopy, Raman spectroscopy, infrared spectroscopy, and atomic force microscopy. Our study focuses on a side-to-side comparison of the fundamental structural and optical properties of the two families of fluorescent nanoparticles, and on their interaction pathways with mercury ions, which we use as a probe of surface emissive chromophores. Comparison between the two families of carbon dots, and between carbon dots subjected to different functionalization procedures, readily identifies a few key structural and optical properties apparently common to all types of carbon dots, but also highlights some critical differences in the optical response and in the microscopic mechanism responsible of the fluorescence. The results also provide suggestions on the most likely interaction sites of mercury ions at the surface of carbon dots and reveal details on mercury-induced fluorescence quenching that can be practically exploited to optimize sensing applications of carbon dots.

Current developments and future trends in photocatalytic glycerol valorization: process analysis

Challenges and opportunities in photocatalytic glycerol valorization to hydrogen and value-added liquid products: process analysis and parametric study.

Green Synthesis of Full-Color Fluorescent Carbon Nanoparticles from Eucalyptus Twigs for Sensing the Synthetic Food Colorant and Bioimaging

Full-color fluorescent carbon nanoparticles (CNPs) are produced by a facile and green hydrothermal method followed by the differential washing technique. Eucalyptus twigs are used as a precursor to synthesize multiemissive light blue, blue, green, and red CNPs. Brilliant Blue FCF (BB) is a widely used synthetic food colorant, which is toxic for the human body, when consumed beyond the permitted limit. Herein, we demonstrate light blue CNPs as a sensor for selective and sensitive detection of BB via a fluorescence quenching mechanism with a limit of detection of 200 nM. Temperature-dependent fluorescence and 1H NMR studies confirmed the mechanism as combined dynamic and static quenching. To demonstrate the practical efficacy of the sensor, BB is effectively detected and estimated in selected food samples procured from the market. Moreover, the biocompatibility of light blue and blue CNPs is examined and confirmed by performing a cytotoxicity assay on MDA-MB-231 cell lines. Subsequently, the cellular imaging study is also carried out to explore the internalization process of the CNPs as a function of concentration. To the best of our knowledge, this is the first time that Eucalyptus twigs, a natural source of high abundance, are used as raw materials and valorized for sensing artificial food color and bioimaging purposes.

Structural, luminescence and geno/cytoxicity study of carbon dots derived from Opuntia ficus-indica (L.) Mill

Carbon dots derived from nopal significantly increase the number of micronuclei in mouse erythrocytes and inhibit mouse bone marrow cell proliferation.

A review on charred traditional Chinese herbs: carbonization to yield a haemostatic effect

Context: Charcoal of Chinese drugs is a kind of special processing product in Chinese medicine and used for treatment of haemoptysis, hematemesis and haemorrhage in the clinic during ancient times. During carbonizing, significant changes occur in chemical constituents and the efficacy of haemostasis will be enhanced. But the quality control standard of 'carbonizing retains characteristics' should be followed. Objective: This review introduces the typical methods of carbonizing, which highlight current research progress on haemostatic substances of charcoal drugs so as to provide a reasonable explanation for the theory of haemostasis treated by charcoal medicine. Methods: English and Chinese literature from 2004 to 2019 was collected from databases including Web of Science, PubMed, Elsevier and CNKI (Chinese). Charcoal drug, chemical constituents, processing, haemostasis and carbon dots were used as the key words. Results: Charcoal drugs mainly play a haemostatic role and the effect can be classified into four types to stop bleeding: removing blood stasis, cooling blood, warming meridians and astringing. Changes in composition lead to changes in pharmacodynamics. Carbonizing methods and basic research on haemostasis material in charcoal drugs have also been summarized. Conclusions: This review summarizes the classification of charcoal drugs and highlights the possible material bases for the haemostatic effect of charcoal drugs in recent years, providing new insights to future research.

Future Perspectives and Review on Organic Carbon Dots in Electronic Applications

Over the span of the past decade, carbon dots (CDs) synthesized from renewable organic resources (organic CDs) have gathered a considerable amount of attention for their photoluminescent properties. This review will focus on organic CDs synthesized using clean chemistry and conventional synthetic chemistry from organic sources and their fluorescence mechanisms, such as quantum confinement effect and surface/edge defects, before outlining their performance in electronic applications, including organic photovoltaic devices, organic light-emitting devices, biosensors, supercapacitors, and batteries. The various organic resources and methods of organic CDs synthesis are briefly covered. Many challenges remain before the adoption of CDs can become widespread; their characterization, structure, functionality, and exact photoluminescent mechanism all require additional research. This review aims to summarize the current research outcomes and highlight the area where further research is needed to fully use these materials.

Facile synthesis of fluorescent carbon dots from Prunus cerasifera fruits for fluorescent ink, Fe3+ ion detection and cell imaging

Carbon dots (CDs) synthesized from natural products have drawn numerous attentions due to some unique properties. Here, Prunus cerasifera fruits were used as carbon source to synthesize high luminescent CDs by hydrothermal method. The obtained CDs were characterized by TEM, FTIR and XPS methods, founding the CDs were near-spherical and contained abundant nitrogen element. The CDs aqueous solution exhibited bright blue fluorescence under ultraviolet illumination, with the maximum emission at 450 nm. They could be potentially used as invisible fluorescent ink by written on the paper and irradiated by UV light, due to their fluorescent properties. Moreover, the CDs were found being selectively quenched by Fe³⁺ ion. The quench of CDs was linearly related to the concentration of Fe³⁺ ion in the range of 0-0.5 mM, meaning they could be developed as fluorescent probe of Fe³⁺ ion. At last, the CDs were used for cell imaging, founding they were low toxicity to HepG2 cells and exhibited blue and green fluorescence under a fluorescence microscope. In summary, the CDs prepared from Prunus cerasifera fruits exhibited excellent fluorescence properties, and could be potentially applied in the field of fluorescent ink, Fe³⁺ ion detection and cell imaging.