A label-free nano-probe for sequential and quantitative determination of Cr(VI) and ascorbic acid in real samples based on S and N dual-doped carbon dots

Citrus Medica-derived Fluorescent Carbon Dots for the Imaging of Vigna Radiate Root Cells

Bio-imaging is a crucial tool for researchers in the fields of cell biology and developmental biomedical sector. Among the various available imaging techniques, fluorescence based imaging stands out due to its high sensitivity and specificity. However, traditional fluorescent materials used in biological imaging often suffer from issues such as photostability and biocompatibility. Moreover, plant tissues contain compounds that cause autofluorescence and light scattering, which can hinder fluorescence microscopy effectiveness. This study explores the development of fluorescent carbon dots (Cm-CDs) synthesized from Citrus medica fruit extract for the fluorescence imaging of Vigna radiata root cells. The successful synthesis of CDs with an average size of 6.7 nm is confirmed by Transmission Electron Microscopy (TEM). The X-ray diffraction (XRD) analysis and raman spectroscopy indicated that the obtained CDs are amorphous in nature. The presence of various functional groups on the surface of CDs were identified by Fourier transform infrared (FTIR) spectra. The optical characteristics of Cm-CDs were studied by UV-Visible spectroscopy and photoluminescence spectroscopy. Cm-CDs demonstrated strong excitation-dependent fluorescence, good solubility, and effective penetration in to the Vigna radiata root cells with multicolor luminescence, and addressed autofluorescence issues. Additionally, a comparative analysis determined the optimal concentration for high-resolution, multi-color root cell imaging, with Cm-CD2 (2.5 mg/ml) exhibiting the highest photoluminescence (PL) intensity. These findings highlight the potential of Cm-CDs in enhancing direct endocytosis and overcoming autofluorescence in plant cell imaging, offering promising advancements for cell biology research.

Ultrasensitive fluorescent carbon dot sensor for quantification of soluble and insoluble Cr(VI) in particulate matter

This study investigates advanced functional materials to address the need for practical and affordable analytical techniques for monitoring large amounts of insoluble Cr(VI). N,S-doped fluorescent carbon dots (f-CDs) were fabricated through microwave synthesis, with an average diameter of 10 nm. These f-CDs were explored as potential sensors for detecting Cr(VI) in ambient particulate matter (PM). Laboratory experiments yielded positive results, showing average recoveries of 106.0%, 102.3%, 96.4%, and 101.7% for PbCrO4, BaCrO4, CaCrO4, and (NH4)2CrO4, respectively. Applying the fluorescence method to field PM samples, a method detection limit (MDL) of 0.32 ng/m3 for total Cr(VI) quantification was achieved. The fluorescence decay of carbon dots remained stable over time, suggesting that Cr(VI) quenching primarily occurred due to the internal filter effect through a static quenching mechanism. These f-CDs exhibited advantageous properties, including affordability, solubility, luminescence, and sensitivity, positioning them as a promising alternative for Cr(VI) detection in ambient air particulates. This study contributes to further developing carbon-based functional materials for detecting metallic air pollutants.

Synthesis and application of fluorescent N-doped carbon dots/hydrogel composite for Cr(VI) adsorption: Uncovering the ion species transformation and fluorescent quenching mechanism

A fluorescent composite material fabricated from nitrogen-doped carbon dots with polyvinyl alcohol (PVA)/polyvinylpyrrolidone (PVP)/citric acid (CA) hydrogel was synthesized using a microwave-assisted hydrothermal method. The composite was used as a metal ion sensor and adsorbent to remove chromium (Cr(VI)) from water. The chemical structure and Cr(VI) removal performance of the fluorescent composite films were also characterized. Fluorescent quenching upon Cr(VI) adsorption showed that Cr(VI) binding was attributed to the N-doped carbon dots. The results were confirmed by several analytical techniques, including X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and X-ray absorption spectroscopy (XAS). The mechanism of Cr(VI) removal from water by the fluorescent composite film was based on the adsorption and subsequent reduction of N-doped carbon dots within the 3D porous composite film. XPS measurements showed that 53.2% Cr(III) and 46.8% Cr(VI) were present on the composite surface after Cr(VI) adsorption. Moreover, XAS revealed a change in the oxidation state of Cr(VI) to Cr(III) after adsorption and in the Cr-O bond length (1.686 Å to 2.284 Å) after reduction. The Cr(VI) adsorption capacity of the composite film was 4.90 mg g^-1 at pH 4 and fit the pseudo-second-order kinetic and Freundlich models. The results of this study could be used as a platform to further apply CDs/HD composites to remove Cr(VI) from water sources.

N,Zn-Doped Fluorescent Sensor Based on Carbon Dots for the Subnanomolar Detection of Soluble Cr(VI) Ions

The development of a fluorescent sensor has attracted much attention for the detection of various toxic pollutants in the environment. In this work, fluorescent carbon dots (N,Zn-CDs) doped with nitrogen and zinc were synthesized using citric acid monohydrate and 4-pyridinecarboxyaldehyde as carbon and nitrogen sources, respectively. The synthesized N,Zn-CDs served as an "off" fluorescence detector for the rapid and sensitive detection of hexavalent chromium ions (Cr(VI)). The zinc metal integrated into the heteroatomic fluorescent carbon dot played a functional role by creating a coordination site for the hydrogen ions that were displaced after the addition of Cr to the solution matrix. The stepwise addition of Cr(VI) effectively quenched the fluorescence intensity of the N,Zn-CDs, and this phenomenon was attributed to the internal filter effect. A low detection limit of 0.47 nmol/L for Cr(VI) was achieved in the fluorescence experiments. Real water samples were used to evaluate the practical application of N,Zn-CDs for the quantification of Cr(VI). The results show acceptable recoveries and agreement with ion chromatography-ultraviolet spectrometry results. These good recoveries indicate that the fluorescence probe is very well suited for environmental measurements.

Fluorescent nanocellulose-based hydrogel incorporating titanate nanofibers for sorption and detection of Cr(VI)

Chromium pollution is a major environmental concern; thus, effective and multifunctional adsorbents for removing the Cr(VI) ion are urgently needed. A fluorescent nanocellulose-based hydrogel (FNH) incorporating titanate nanofibers (TNs) was developed for the sorption and detection of Cr(VI) ion. The chemical and physical structures of the hydrogels, as well as their sorption and detection properties, were studied. The predicted maximum adsorption capacity and the lowest detection limit of FNH were 648.4 mg/g and 0.039 μg/L, respectively. Furthermore, the sorption and detection mechanisms of FNH were discussed in detail. These results showed that the excellent sorption and detection might be mainly attributed to the three-dimensional (3D) porous structure constructed by TNs and cellulose nanocrystals modified with carbon dots, which improved the sorption ability and provided the rapid visual response to Cr(VI). Furthermore, cost analysis showed that FNH was cheaper than activated carbon in removing the Cr(VI) ion. This work established a facile technique in developing low-cost and multifunctional adsorbents.

Simple One-step Solid-state Synthesis of Highly Crystalline N Doped Carbon Dots As Selective Turn Off-sensor for Picric Acid and Metanil Yellow

A simple one-step solid-state pyrolysis method has been employed to synthesize highly crystalline nitrogen-doped carbon dots using adipic acid and urea as carbon and nitrogen sources. The prepared carbon dots displayed UV emission ( λ_ex = 290 nm and λ_em = 370 nm) and blue fluorescence emission ( λ_ex = 360 nm and λ_em = 420 nm). These crystalline nitrogen-doped carbon dots exhibited a quantum yield of 6% with tryptophan as standard at 370 nm emission and 14% with quine sulfate as standard at 420 nm emission. The synthesized carbon dots were spherical, having a mean particle diameter of 2.56 ± 0.57 nm. The prepared carbon dots have large functional groups on their surface, which renders excellent water solubility to them. Carbon dots was used as selective and sensitive turn off sensor for detection of picric acid Metanil yellow with the linear response for picric acid ranging from 2 μM to 22 μM and 2-45 μM with a detection limit of 0.06 μM and 0.45 μM and for Metanil yellow ranging from 1 μM to 30 μM with a detection limit of 0.32 μM. The mechanism for detecting metanil yellow is proposed to be the inner filter effect. At the same time, it is both the inner filter effect and FRET for picric acid. The actual sample application of carbon dots as a nanosensor was tested to detect metanil yellow as an adulterant in turmeric powder.

Reuse of waste Myrica rubra for green synthesis of nitrogen-doped carbon dots as an "on-off-on" fluorescent probe for Fe3+ and ascorbic acid detection

As one kind of high nutrition fruits, abandoned Myrica rubra causes great waste due to short storage period. For resource utilization, we herein fabricated the Myrica rubra-based N-doped carbon dots (MN-CDs) by a facile/green hydrothermal method. MN-CDs, fabricated from four regions of China, displayed significant differences in their corresponding fluorescence intensities (FIs). Interestingly, different batches of waxberry samples from the same region (Wenzhou, China) exhibited slight differences in their FIs, and also an excellent anti-photobleaching and anti-salt capacity. Based on Fe³⁺-triggered quenching effect and fluorescent recovery by redox reaction of AA and Fe³⁺, MN-CDs were employed to construct an "on-off-on" switch probe for sequential detection of Fe³⁺ and ascorbic acid (AA). Through Zeta potential, UV spectrum, Stern-Volmer equation, and valence-conduction band theory, the Fe³⁺-triggered quenching belonged to a static quenching process, which resulted from the synergistic contribution of inner filtering effect and photo-induced electron transfer mechanisms. The linear ranges for Fe³⁺ and AA detections were 1-1000 and 0.1-1000 mM. The limits of detection were 0.3 μM for Fe³⁺ in environmental waters, and 0.03 μM for AA in pharmaceutical tablets and fruit juice samples. Under 365-nm UV lamp, the color changes of test papers were easily observed from dark blue and bright blue in the presence of Fe³⁺ and AA, and thus the MN-CDs-based switch probe could be satisfactorily used for visually qualitative detection of Fe³⁺ and AA outdoor with our naked eyes. To sum up, MN-CDs not only realize resource reutilization of abandoned Myrica rubra, but also offer an convenient outdoor approach for qualitative detection of Fe³⁺ and AA in complex matrices.

A yellow-emitting carbon quantum dot-based fluorescent logic gate for the continuous detection of Au3+ and biothiols

Yellow-emitting carbon quantum dots, named Y-CQDs, were synthesized from O-phenylenediamine and ethylene glycol via a one-pot hydrothermal method. A fluorescent IMPLICATION logic gate for the continuous and "on-off-on" detection of Au³⁺ and biothiols in tap water at the nanoscale level was constructed based on these QDs. It showed promise in real sample detection and also as a fluorescent ink.

Effective Adsorption and Sensitive Detection of Cr(VI) by Chitosan/Cellulose Nanocrystals Grafted with Carbon Dots Composite Hydrogel

Due to its lethal effect on the human body and other creatures, Cr(VI) ions have attained widespread public attention, and an effective adsorbent for removing Cr(VI) ions is vital. Chitosan (CS)/cellulose nanocrystals grafted with carbon dots (CNCD) composite hydrogel with strong sorption ability and sensitive detection ability for Cr(VI) was formed. The cellulose nanocrystals (CN) offered a natural skeleton for assembling 3D porous structures, and then improved the sorption ability for Cr(VI); moreover, carbon dots (CD) acted as a fluorescent probe for Cr(VI) and provided Cr(VI) adsorption sites. With a maximum adsorption capacity of 217.8 mg/g, the CS/CNCD composite hydrogel exhibited efficient adsorption properties. Meanwhile, with a detection limit of 0.04 μg/L, this hydrogel was used for selective and quantitative detection of Cr(VI). The determination of Cr(VI) was based on the inner filter effect (IFE) and static quenching. This hydrogel retained its effective adsorption ability even after four repeated regenerations. Furthermore, the economic feasibility of the CS/CNCD composite hydrogel over activated carbon was confirmed using cost analysis. This study provided one new method for producing low-cost adsorbents with effective sorption and sensitive detection for Cr(VI).

Synthesis of 4-dimethylaminobenzyl chrysin ester-Zn fluorescent chemical sensor for the determination of Cr(VI) in water

Cr(VI) is a type of dangerous effluent that has caused great harm to human health and the environment. Recognition and perception of Cr(VI) by artificial receptors has attracted extensive attention. A novel fluorescent chemical sensor based on the 5,7-dihydroxyflavone skeleton was designed and synthesized for the selective recognition of Cr(VI). As confirmed by fluorescence technology, the fluorescent probe 4-dimethylaminobenzyl chrysin ester-Zn (DBC-Zn) showed high sensitivity and selectivity for dichromate and a fast response (less than 30 sec) recognition. The fluorescence intensity of DBC-Zn varies linearly with the concentration of Cr(VI) in the range 0.1-1 μM. The detection limit of Cr₂ O₇ ^2- by DBC-Zn is 2.3 nM, which is far lower than the national safe drinking water standard stipulated by the US Environmental Protection Agency (1.9 μM). The quenching mechanism of the probe can be attributed to the interaction of the dynamic quenching effect and the fluorescence internal filtration effect. In addition, the probe has good stability in both neutral and alkaline environments, and the accuracy of quantitative analysis of Cr₂ O₇ ^2- in lake water or tap water is more than 80%. The test paper based on DBC-Zn can effectively detect Cr₂ O₇ ^2- at the concentration of 100 ppb. This shows that the probe has a certain practical application value.

Lysosome targeting, Cr(vi) and l-AA sensing, and cell imaging based on N-doped blue-fluorescence carbon dots

N-doped blue-fluorescence carbon dots (N-CDs) were fabricated via a one-pot hydrothermal method using folic acid and p-phenylenediamine. The obtained N-CDs exhibited strong fluorescence (FL) with a considerable quantum yield (QY) of 21.8% and exceptional optical stability under different conditions. Upon introducing Cr(vi), blue FL of N-CDs was distinctly quenched. On subsequent addition of l-AA, the FL of N-CDs could be partially recovered. The fluorescence changes of N-CDs have been utilized to detect Cr(vi) and l-AA in aqueous solutions with linear ranges of 0.10-150 μM and 0.75-2.25 mM, respectively, as well as limit of detection values of 9.4 nM and 25 μM, respectively. Furthermore, as-obtained N-CDs can be extended to monitor the fluctuation of intracellular Cr(vi) and l-AA. More intriguingly, N-CDs can target lysosomes with a satisfactory Pearson correction coefficient of 0.87, which indicates a promising application prospect in the biomedical field.

Carbon dots for ratiometric fluorescence detection of morin

The B,N dual-doped carbon dots (B,N-CDs) for ratiometric fluorescence detection the morin were prepared from sodium tetraborate and polyethyleneimine through the single-step hydrothermal method. The B,N-CDs exhibited the optimum excitation and emission wavelength at 340 nm and 467 nm, respectively. Interestingly, the intensities of emission peak at 467 nm of B,N-CDs reduced meanwhile a new peak emerged at 560 nm with the continuous addition of morin, which revealed the ratio fluorescence characteristic between F_560nm/F_467nm and morin concentration with the linearity range and detection limit of 14.5-32.5 μmol/L and 0.3 μmol/L (S/N = 3), respectively. The interference of common antibiotics and remedies could be ignored when the concentration of morin was detected by the B,N-CDs, which demonstrating the outstanding selectivity. Furthermore, the proposed fluorescence method is used to detect morin in urine with recoveries are 99.8-104.5%. The results of this research indicate the feasibility and practicality of B,N-CDs as an effective fluorescent probe for the determination of morin.

Application of Nanotechnology in Analysis and Removal of Heavy Metals in Food and Water Resources

Toxic heavy metal contamination in food and water from environmental pollution is a significant public health issue. Heavy metals do not biodegrade easily yet can be enriched hundreds of times by biological magnification, where toxic substances move up the food chain and eventually enter the human body. Nanotechnology as an emerging field has provided significant improvement in heavy metal analysis and removal from complex matrices. Various techniques have been adapted based on nanomaterials for heavy metal analysis, such as electrochemical, colorimetric, fluorescent, and biosensing technology. Multiple categories of nanomaterials have been utilized for heavy metal removal, such as metal oxide nanoparticles, magnetic nanoparticles, graphene and derivatives, and carbon nanotubes. Nanotechnology-based heavy metal analysis and removal from food and water resources has the advantages of wide linear range, low detection and quantification limits, high sensitivity, and good selectivity. There is a need for easy and safe field application of nanomaterial-based approaches.

Azithromycin detection in cells and tablets by N,S co-doped carbon quantum dots

Azithromycin (AZM)¹ is one of the most widely used antibiotics. AZM abuse is easy to cause great harm to human body, so developing a rapid and sensitive method to detect AZM is of great importance. Herein, 3-aminothiophenol as only reaction precursor, nitrogen and sulfur co-doped carbon quantum dots (N,S-CQDs)² were fabricated by one-step hydrothermal carbonization method. All characteristics demonstrate that N,S-CQDs possess good water solubility, high fluorescence stability and low cytotoxicity. Without being disturbed by amino acids and drugs, the most interesting finding is that AZM can efficiently quench the fluorescence of N,S-CQDs by a synergistic effect of electrostatic interaction and static quenching. A fluorescent probe for the detection of AZM was constructed with high selectivity and good sensitivity, achieving two linear ranges of 2.5-32.3 μM and 37.2-110 μM and a limit of detection of 0.76 µM. The proposed fluorescent method was used for the detection of AZM in cells with fulfilling results. More importantly, the fluorescent probe was successfully used to the detection of AZM in tablets and human urine with recovery rate and relative standard deviations of 98.2-104.8% and 0.04-3.46%, respectively, which was confirmed by the standard method of HPLC-UV. This finding illustrates the usefulness and feasibility of N,S-CQDs as an effective fluorescent probe for the detection of AZM in tablets and human urine, which is helpful for supervising and guiding pharmacy.

Synthesis of polyurethane-derived nitrogen-doped carbon dots for a high-performance fluorescence bioimaging probe

A universal and robust strategy using polyurethane sponge as a precursor was developed to synthesize highly-soluble nitrogen-doped carbon quantum dots via a solvothermal method.

Fe3+ and intracellular pH determination based on orange fluorescence carbon dots co-doped with boron, nitrogen and sulfur

The fluorescent boron, nitrogen and sulfur co-doped carbon dots (BNSCDs) were prepared by simple hydrothermal reaction of 4-carboxyphenylboronic acid and 2,5-diaminobenzenesulfonic acid at 200 °C for 8 h. The fluorescence of the BNSCDs could be quenched by Fe³⁺ based on the electron transfer between Fe³⁺ and BNSCDs, so a label-free, good selectivity and high sensitivity method for Fe³⁺determination was established with linear range and LOD of 1.5-692 μmol/L and 87 nmol/L, respectively. And then the fluorescent probe was employed for detection of Fe³⁺ in tap water, coal gangue, fly ash and food samples successfully. Moreover, the as-prepared BNSCDs could serve as a novel pH fluorescent probe in the range of pH 1.60-7.00, which could be attributed to the proton transfer of carboxyl groups on the surface of BNSCDs. More importantly, the pH fluorescent probe possesses fast, real-time and low toxicity, applying for intracellular pH fluorescence imaging in HIC, HIEC, LO2 and SMMC7721 cells. In view of its simplicity, timely response and outstanding compatibility, the as-fabricated BNSCDs show the potential applications in water quality and solid waste monitoring, food detection, real-time measuring of intracellular pH change in vitro.

Carbon quantum dots derived from the extracellular polymeric substance of anaerobic ammonium oxidation granular sludge for detection of trace Mn(vii) and Cr(vi)

Carbon quantum dots (CQDs) were synthesized via a hydrothermal method, in which extracellular polymeric substance (EPS) from anaerobic ammonium oxidation (anammox) granular sludge was used as a carbon precursor, while citric acid and ethylenediamine were applied as auxiliary carbon source and passivation agent, respectively. The synthesized CQDs, with orderly spherical shape and mean size of 7.15 nm, emitted blue fluorescent light under UV radiation of 365 nm. The CQDs had a high fluorescence yield (40.84%), with good water solubility and excellent spectroscopic properties. In addition, the CQDs exhibited selective, sensitive and distinctive fluorescence quenching behaviors for Cr(vi) and Mn(vii) in a PBS buffer solution (NaH₂PO₄–Na₂HPO₄) of pH 7, with a detection limit of 5.8 nM for Cr(vi) and 2.3 nM for Mn(vii). Owing to the nitrogen components from the EPS of anammox granules, the CQDs were well nitrogen-doped, promoting electron-transfer and leading to reduction between the CQDs and Mn(vii)/Cr(vi). These results indicate that CQD-based chemical sensing is a simple and efficient means for the fluorescence detection of Mn(vii) and Cr(vi).

Fluorescence detection of trace Mn(vii) or Cr(vi) by the CQDs prepared from anaerobic ammonium oxidation granular sludge.

An optical sensing platform based on hexacyanoferrate intercalated layered double hydroxide nanozyme for determination of chromium in water

In this work, hexacyanoferrate intercalated Ni/Al LDH (Ni/Al-Fe(CN)₆ LDH) nanozyme was synthesized by one-pot co-precipitation method and used for determination of chromium in water samples by employing its peroxidase mimicking activity. The synthesized nanozyme can effectively catalyze the oxidation of fluorometric peroxidase substrate terephthalic acid by H₂O₂ to produce a highly fluorescent product. It was found that Cr(VI) promotes the peroxidase-like activity of Ni/Al-Fe(CN)₆ LDH and this effect was intensified by increasing the Cr(VI) concentration. Several variables affecting the fluorescence intensity including the concentration of nanoparticles and reagents as well as reaction time were investigated and optimized. Under the optimal conditions, good linearity was observed in the range of 0.067-10 μM Cr(VI), and limit of detection and quantification were found to be 0.039 and 0.131 μM, respectively. Furthermore, the developed method showed good applicability for the determination of total Cr based on the oxidation of Cr (III) to Cr (VI). The applicability of the proposed method was demonstrated by analyzing various environmental water samples. The presented nanozyme displayed superior benefits in terms of reusability, repeatability, cost and environment-friendly features. The present work aims to expand LDHs based enzyme mimics to optical sensor fields.

Convenient synthesis of carbon nanodots for detecting Cr(vi) and ascorbic acid by fluorimetry

Carbon nanodots (CDs) were simply synthesized from Sophora flavescens Ait. “On–off–on” fluorescent probes for the sensitive and selective detections of Cr(iv) and ascorbic acid (AA) were founded and well applied in real samples.

Surface-passivated, soluble and non-toxic graphene nano-sheets for the selective sensing of toxic Cr(vi) and Hg(ii) metal ions and as a blue fluorescent ink

Non-toxic amine-functionalized soluble graphene nano-sheets (f-GNS) were synthesized by using an old and well-known simple organic procedure. The f-GNS exhibited enhanced optical properties, such as strong blue fluorescence emission with a high value of quantum yield (∼13%). The O,O'-bis-(2-aminopropyl) polypropylene glycol-block-polyethylene glycol-block-polypropylene glycol 800 as block polymeric amine (BPA)-passivized surface of f-GNS exhibited high aqueous solubility and excitation-dependent fluorescence emission behavior with a strong photo-stability performance. These f-GNS were tested for the significant selective sensing of toxic metal ions Cr(vi) and Hg(ii) from various tested toxic metal ions. The sensing experiment was supported by cyclic voltammetry analysis. The dual metal ion sensing method based on fluorescence showed the limit of detection (LOD) of ∼56 nM for Cr(vi) and ∼45 nM for Hg(ii) through a fluorescence quenching process. f-GNS were found to be non-toxic when tested over Escherichia coli (E.coli) cells. Additionally, the strong blue emission properties of f-GNS enabled their use as a suitable blue fluorescent ink under UV light illumination.