A benzothiazole-rhodol based luminophor: ESIPT-induced AIE and an application for detecting Fe2+ ion

Rhodamine-based Fluorescent Probe With Quick Response and High Selectivity for Imaging Labile Ferrous Iron in Living Cells and Zebrafish

The transition between its various oxidation states of Iron plays a crucial part in various chemical transformation of cells. Misregulation of iron can give rise to the iron-catalyzed reactive oxygen species disorder which have been linked to a variety of diseases, so it is crucial to monitor the labile iron pool in vivo for clinical diagnosis. According to iron autoxidation and hydrogen abstraction reaction, we reported a novel "off-on" fluorescent probe to response to ferrous (Fe2+) both in solutions and biological systems. The probe responds to Fe2+ with good selectivity toward competing metal ions. What's more, the probe presents significant fluorescent enhancement to Fe2+ in less than 1 min, making real-time sensing in biological system possible. The applications of the probe in bioimaging revealed the changes in labile iron pool by iron autoxidation or diverse stimuli.

Surface plasmon-assisted catalytic reduction of p-nitrothiophenol for the detection of Fe2+ by surface-enhanced Raman spectroscopy

Herein, we developed a concise, time-efficient, and high selective assay for detecting Fe2+ through its triggered surface plasmon-assisted reduction reaction of p-nitrothiophenol (PNTP) to p,p'-dimercaptoazobenzene (DMAB) on the surface of gold nanoparticles (AuNPs) based on surface-enhanced Raman scattering (SERS) spectroscopy. When Fe2+ was added to the PNTP-AuNPs system, the appearance of three characteristic peaks at 1142, 1392, and 1440 cm-1 attributed to DMAB demonstrated that Fe2+ induced the catalytic coupling reaction of PNTP. The Raman intensity ratio of the peak at 1142 cm-1 to the peak at 1336 cm-1 and the concentration of Fe2+ presented a good linear response from 10 to 100 μM with a limit of detection (LOD) of 0.35 μM. More importantly, the entire detection process can be completed within 2 min and further successfully used for the detection of Fe2+ in river water.

A Novel Polymer Inclusion Membrane-Based Green Optical Sensor for Selective Determination of Iron: Design, Characterization, and Analytical Applications

The design, characterization, and analytical application of a green optical sensor for the selective determination of Fe(II) ions is proposed. The sensor is based on the immobilization of the chromogenic reagent picolinaldehyde salicyloylhydrazone (SHPA) within a polymer inclusion membrane. To reduce solvent usage, the reagent was synthesized using a green mechanochemical procedure. The components for sensor preparation were optimized with a sequential simplex method and the optimal composition was found to be 0.59 g cellulose triacetate (base polymer), 0.04 g SHPA (chemosensor reagent), 4.9 mL dibutyl phthalate (plasticizer), and 38 mL dichloromethane (solvent). The conditions of iron analysis were also optimized resulting in pH 6 for aqueous solution, 90 min exposure time and 10 min short-term stability. The optical sensor showed a linear range from the limit of detection (0.48 µmol L-1) to 54 µmol L-1 Fe(II). The precision of the method was found to be 1.44% and 1.19% for 17.9 and 45 µmol L-1 Fe(II), respectively. The characteristics of the sensor allowed the design of a Fe(II)/Fe(III) speciation scheme. The methodology was successfully applied to the determination of iron in food preservatives, food additives, and dietary supplement. Additionally, the Fe speciation scheme was successfully applied to an agricultural fertilizer.

Preparation of temperature-responsive nanomicelles with AIE property as fluorescence probe for detection of Fe3+ and Fe2

Temperature-responsive nanomicelles with aggregation induced emission (AIE) property were prepared by the host-guest complexation of ferrocene functionalized tetraphenyl (TPE-Fc) and β-cyclodextrin-poly (N-isopropylacrylamide) (β-CD-(PNIPAM)₇). The AIE chromophore TPE-Fc bound to the hydrophobic cavity of cyclodextrin serves as the core of micelles, and temperature sensitive PNIPAM serves as the shell to give the micelles good solubility. The size of the nanomicelles is about 100 nm. At the excitation wavelength of 340 nm, the strongest fluorescent emission peak was 421 nm. The introduction of cyclodextrin star polymer increased the fluorescence intensity of nanomicelles, thus improving the recognition of probe to Fe³⁺ and Fe²⁺. The fluorescent probe can quickly detect Fe³⁺ and Fe²⁺ in water within 5 min even in the presence of various interfering ions. The detection limits of Fe³⁺ and Fe²⁺ were 1.04 μM and 0.78 μM, respectively in the range of 10-90 μM. The formation of complex between the probe and Fe³⁺/Fe²⁺ was supported by Job's plot. The probe was successfully applied to the detection of Fe³⁺and Fe²⁺ in actual water sample with a good recovery. In addition, a possible sensing mechanism for the interaction of iron ions with amide bond groups of nanomicelles was proposed.

A Colorimetric Distinct Color Change Cu(II) 4-{[1-(2,5-dihydroxyphenyl)ethylidene]amino}-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one Chemosensor and its Application as a Paper Test Kit

In the current research work "4-{[1-(2,5-dihydroxyphenyl)ethylidene]amino}-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one" chemosensor (C1) synthesized by condensation reaction using "4-amino-1,2-dihydro-1,5-dimethyl-2-phenylpyrazol-3-one" and "2,5-dihydroxy actophenone" was used as the effective sensor of metal ion. The C1 shows absorption peak at 326 nm due to the C = C bond (π-π* transition), while the absorption peak at 364 nm is caused by the C = O bond (n-π* transition). In the presence of copper, C1 only demonstrated a redshift in absorption peak from 364 to 425 nm. Even in the presence of other competing metal ions, the hypsochromic shift of the absorption band and the quenching of the fluorescence emission intensity were different for detecting Cu²⁺, in CH₃OH-H₂O (v/v = 6:4). The capacity of the C1 to bind with Cu²⁺ was further proved using DFT simulations. The complex C1 + Cu²⁺ has a HOMO-LUMO energy gap of 2.8002 eV, which is lesser than C1 (2.9991 eV) showing improvement in the stability of the C1 + Cu²⁺ complex. Using the Benesi-Hildebrand and Scatchard plots, calculated Kb values were to be 47,340 and 48369 M^-1 respectively, showing the creation of stable complexation between Cu²⁺ and C1 with 1:1 stoichiometry. The limit of detection (LOD) for Cu²⁺ ion was 649 nM. Strip sheets were also built and tested to detect varying amounts of Cu²⁺ in aqueous solution, and their color change suggested that they might be used for on-site Cu²⁺ detection in polluted water.

Facile liquid colorimetric sensor using high-density deep eutectic solvent for trace detection and speciation of iron in milk

An efficient colorimetric sensor was developed using a high-density deep eutectic solvent (HD-DES) for the trace detection and speciation of iron in various milk samples. A liquid colorimetric probe was fabricated by dissolving ferrozine (FZ) in HD-DES prepared from TBABr and PBA. The prederivatization of Fe²⁺ via complexation with FZ on the HD-DES/FZ probe provided the [Fe(FZ)₃]^4- complex, which led to a color change from pale yellow to purple before it was simultaneously extracted by HD-DES. The Fe³⁺ content was calculated by subtracting the amount of Fe²⁺ from the total Fe content following the reduction of Fe³⁺ to Fe²⁺ by L-ascorbic acid in an acid buffer. Under the optimized conditions, the proposed colorimetric sensor exhibited appreciable linearity in the concentration range of 0.003-0.04 mg L^-1, a low limit of detection (0.95 µg L^-1), high enrichment factor (50), and outstanding repeatability. The liquid colorimetric probe was successfully applied for the determination and speciation of iron in milk samples, and the results were compared with those obtained using the standard atomic absorption spectrometry method. Moreover, quantitative analysis was performed on a smartphone using the Image J application to estimate the color intensity change, which eliminated the requirement of sophisticated scientific instruments.

Aggregation-induced emission (AIE) from poly(1,4-dihydropyridine)s synthesized by Hantzsch polymerization and their specific detection of Fe2+ ions

As an important metal element widely existing in nature and the human body, the simple and specific detection of Fe2+ ions has always been of interest.

New Fluorescent Probes for the Sensitive Determination of Glyphosate in Food and Environmental Samples

In this paper, a dual-functional probe, 2-(benzothiazol)-4-(3-hydroxy-4-methylphenyl) imino phenol (BHMH), was synthesized and characterized for the simultaneous detection of Cu2+ and Fe3+ in dimethyl sulfoxide/4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (DMSO/HEPES) (1:4, v/v, pH = 6.0). The limits of detections (LODs) for Cu2+ and Fe3+ were 9.05 and 48 nM, respectively. Based on the competitive coordination, the complex BHMH-Cu2+/Fe3+ exhibited good sensitivity and selectivity for glyphosate. The LODs of BHMH-Cu2+ and BHMH-Fe3+ for glyphosate were 0.41 and 0.63 μM, respectively. The probe quantitatively detected glyphosate in tap water, Songhua River water, local water and soil, and food samples. The colorimetric on-site glyphosate sensing through the probe BHMH-Cu2+ was also studied based on smartphones. BHMH and BHMH-Cu2+/Fe3+ exhibited outstanding imaging capabilities for Cu2+, Fe3+, and glyphosate in living cells with low cytotoxicity, especially the first time for glyphosate.

Fundamentals and exploration of aggregation-induced emission molecules for amyloid protein aggregation

The past decade has witnessed the growing interest and advances in aggregation-induced emission (AIE) molecules as driven by their unique fluorescence/optical properties in particular sensing applications including biomolecule sensing/detection, environmental/health monitoring, cell imaging/tracking, and disease analysis/diagnosis. In sharp contrast to conventional aggregation-caused quenching (ACQ) fluorophores, AIE molecules possess intrinsic advantages for the study of disease-related protein aggregates, but such studies are still at an infant stage with much less scientific exploration. This outlook mainly aims to provide the first systematic summary of AIE-based molecules for amyloid protein aggregates associated with neurodegenerative diseases. Despite a limited number of studies on AIE-amyloid systems, we will survey recent and important developments of AIE molecules for different amyloid protein aggregates of Aβ (associated with Alzheimer's disease), insulin (associated with type 2 diabetes), (α-syn, associated with Parkinson's disease), and HEWL (associated with familial lysozyme systemic amyloidosis) with a particular focus on the working principle and structural design of four types of AIE-based molecules. Finally, we will provide our views on current challenges and future directions in this emerging area. Our goal is to inspire more researchers and investment in this emerging but less explored subject, so as to advance our fundamental understanding and practical design/usages of AIE molecules for disease-related protein aggregates.

Experimental and Theoretical Studies on a Simple S-S-Bridged Dimeric Schiff Base: Selective Chromo-Fluorogenic Chemosensor for Nanomolar Detection of Fe2+ & Al3+ Ions and Its Varied Applications

A simple S-S (disulfide)-bridged dimeric Schiff base probe, L, has been designed, synthesized, and successfully characterized for the specific recognition of Al3+ and Fe2+ ions as fluorometric and colorimetric "turn-on" responses in a dimethylformamide (DMF)-H2O solvent mixture, respectively. The probe L and each metal ion bind through a 1:1 complex stoichiometry, and the plausible sensing mechanism is proposed based on the inhibition of the photoinduced electron transfer process (PET). The reversible chemosensor L showed high sensitivity toward Al3+ and Fe2+ ions, which was analyzed by fluorescence and UV-vis spectroscopy techniques up to nanomolar detection limits, 38.26 × 10-9 and 17.54 × 10-9 M, respectively. These experimental details were advocated by density functional theory (DFT) calculations. The practical utility of the chemosensor L was further demonstrated in electrochemical sensing, in vitro antimicrobial activity, molecular logic gate function, and quantification of the trace amount of Al3+ and Fe2+ ions in real water samples.

A rhodol-enone dye platform with dual reaction triggers for specific detection of Cys

In this work, we have developed a rhodol-enone dye platform with bis-reaction-triggers for the selective detection of Cys.