A BODIPY-based ratiometric probe for sensing and imaging hydrogen polysulfides in living cells

Illuminating Polysulfide Distribution in Lithium Sulfur Batteries; Tracking Polysulfide Shuttle Using Operando Optical Fluorescence Microscopy

High-energy-density lithium sulfur (Li-S) batteries suffer heavily from the polysulfide shuttle effect, a result of the dissolution and transport of intermediate polysulfides from the cathode, into the electrolyte, and onto the anode, leading to rapid cell degradation. If this primary mechanism of cell failure is to be overcome, the distribution, dynamics, and degree of polysulfide transport must first be understood in depth. In this work, operando optical fluorescence microscope imaging of optically accessible Li-S cells is shown to enable real-time qualitative visualization of the spatial distribution of lithium polysulfides, both within the electrolyte and porous cathode. Quantitative determinations of spatial concentration are also possible at a low enough concentration. The distribution throughout cycling is monitored, including direct observation of polysulfide shuttling to the anode and consequent dendrite formation. This was enabled through the optimization of a selective fluorescent dye, verified to fluoresce proportionally with concentration of polysulfides within Li-S cells. This ability to directly and conveniently track the spatial distribution of soluble polysulfide intermediates in Li-S battery electrolytes, while the cell operates, has the potential to have a widespread impact across the field, for example, by enabling the influence of a variety of polysulfide mitigation strategies to be assessed and optimized, including in this work the LiNO3 additive.

Activity-Based Fluorescent Probes for Hydrogen Sulfide and Related Reactive Sulfur Species

Hydrogen sulfide (H2S) is not only a well-established toxic gas but also an important small molecule bioregulator in all kingdoms of life. In contemporary biology, H2S is often classified as a "gasotransmitter," meaning that it is an endogenously produced membrane permeable gas that carries out essential cellular processes. Fluorescent probes for H2S and related reactive sulfur species (RSS) detection provide an important cornerstone for investigating the multifaceted roles of these important small molecules in complex biological systems. A now common approach to develop such tools is to develop "activity-based probes" that couple a specific H2S-mediated chemical reaction to a fluorescent output. This Review covers the different types of such probes and also highlights the chemical mechanisms by which each probe type is activated by specific RSS. Common examples include reduction of oxidized nitrogen motifs, disulfide exchange, electrophilic reactions, metal precipitation, and metal coordination. In addition, we also outline complementary activity-based probes for imaging reductant-labile and sulfane sulfur species, including persulfides and polysulfides. For probes highlighted in this Review, we focus on small molecule systems with demonstrated compatibility in cellular systems or related applications. Building from breadth of reported activity-based strategies and application, we also highlight key unmet challenges and future opportunities for advancing activity-based probes for H2S and related RSS.

An ICT-FRET-based ratiometric fluorescent probe for hydrogen polysulfide based on a coumarin-naphthalimide derivative

Hydrogen polysulfide (H2Sn, n > 1), as one of the important members of reactive sulfur species (RSS), plays a vital part in the processes of both their physiology and pathology. In this work, a ratiometric fluorescent probe for H2Sn had been designed and prepared based on the combination mechanism of intramolecular charge transfer (ICT) and fluorescence resonance energy transfer (FRET). The probe chose a coumarin derivative as the energy donor, a naphthalimide derivative as the energy acceptor and 2-fluoro-5-nitrobenzoate as the H2Sn recognition group. When H2Sn was not present in the system, the ICT process of the naphthalimide acceptor was inhibited and the FRET process from the coumarin donor to the naphthalimide acceptor was turned off. When H2Sn was added, both ICT and FRET occurred due to the nucleophilic substitution-cyclization reactions between the probe and hydrogen polysulfide. In addition, the ratio value of the emission intensities at 550 nm and 473 nm (I550 nm/I473 nm) of this probe had a good linear relationship with H2Sn concentration in the range of 6.0 × 10-7-5.0 × 10-5 mol·L-1, and a detection limit of 1.8 × 10-7 mol·L-1 was obtained. The developed probe had high selectivity and sensitivity, as well as good biocompatibility. Additionally, the probe had been used to successfully image both indigenous and exogenous hydrogen polysulfide in A549 cells using confocal microscope.

Recent advances in estrogen receptor-targeted probes conjugated to BODIPY dyes

Estrogens, is a class of steroid hormones associated with the occurrence and development of breast cancer, that bind to estrogen receptors (ER). The development of BODIPY-based fluorescent ligands for the ER has continued to gain tremendous attention over the past 20 years. This review focuses on the synthesis methods, optical properties, and biological activity of BODIPY fluorescent probes conjugated to ER ligands. These will provide new strategy for designing fluorescent probes for targeting estrogen receptors.

A novel flavone-based ESIPT ratiometric fluorescent probe for selective sensing and imaging of hydrogen polysulfides

Hydrogen polysulfides (H₂S_n) as an important member of reactive sulfur species is closely relevant to many physiological functions in redox homeostasis and metabolism. Dual-channel monitor the changes of H₂S_n level in vivo is highly desired. Herein we design a simple ratiometric fluorescent probe based on flavone skeleton for highly selective detection of H₂S_n. The probe HF-NA-MC bearing 2-fluoro-5-nitrobenzoic acid group inhibited the intramolecular ESIPT process, which show the blue fluorescence of adjacent naphthalene unit. In the presence of H₂S_n, the enol form of probe is converted to conjugated keto form, resulted in a 90 nm red-shift of fluorescence emission from 450 nm to 540 nm. The ratiometric intensity (I₅₄₀/I₄₅₀) of the probe exhibits a good linear relationship toward H₂S_n in the range of 0-120 μM, and the detection limit is estimated to be 0.63 μM. The ratiometric fluorescent probe shows high specificity and anti-interference ability for H₂S_n over other related reactive sulfur species. The probe HF-NA-MC shows promising outlook and could be applied to the confocal imaging of H₂S_n by dual emission channels in Hela cells.

Development and Challenge of Fluorescent Probes for Bioimaging Applications: From Visualization to Diagnosis

Fluorescent probes have been used widely in bioimaging, including biological substance detection, cell imaging, in vivo biochemical reaction process tracking, and disease biomarker monitoring, and have gradually occupied an indispensable position. Compared with traditional biological imaging technologies, such as positron emission tomography (PET) and nuclear magnetic resonance imaging (MRI), the attractive advantages of fluorescent probes, such as real-time imaging, in-depth visualization, and less damage to biological samples, have made them increasingly popular. Among them, ultraviolet-visible (UV-vis) fluorescent probes still occupy the mainstream in the field of fluorescent probes due to the advantages of available structure, simple synthesis, strong versatility, and wide application. In recent years, fluorescent probes have become an indispensable tool for bioimaging and have greatly promoted the development of diagnostics. In this review, we focus on the structure, design strategies, advantages, representative probes and latest discoveries in application fields of UV-visible fluorescent probes developed in the past 3-5 years based on several fluorophores. We look forward to future development trends of fluorescent probes from the perspective of bioimaging and diagnostics. This comprehensive review may facilitate the development of more powerful fluorescent sensors for broad and exciting applications in the future.

A novel lysosome-located fluorescent probe for highly selective determination of hydrogen polysulfides based on a naphthalimide derivative

Hydrogen polysulfides (H₂S_n, n > 1) belongs to sulfane sulfur in the reactive sulfur species (RSS) family and plays a significant regulatory role in organisms. Highly selective and lysosome-located probes for detecting hydrogen polysulfides are rare. Thus, it is important to develop a technique to detect the changes of H₂S_n level in lysosomes. In this work, a lysosome-targeting fluorescent probe for H₂S_n was designed and developed based on a naphthalimide derivative. 4-Hydroxynaphthalimide was selected as the fluorescent group and 2-chloro-5-nitrobenzoate group was used as a specific recognition unit for H₂S_n. A morpholine unit was chosen as a lysosome-located group. In the absence of H₂S_n, the fluorescent probe exhibited almost no fluorescence. In the presence of H₂S_n, the fluorescent probe showed strong fluorescence owing to H₂S_n-mediated aromatic substitution-cyclization reactions. The fluorescence emission intensity at 548 nm of the probe showed a good linear relationship toward H₂S_n in the range of 2.0 × 10^-7 - 9.0 × 10^-5 mol·L^-1, and the detection limit was found to be 1.5 × 10^-7 mol·L^-1. The probe possessed a wide work range of pH, including the pH of physiological environment, and high selectivity for H₂S_n. There are almost no cytotoxicity and the ability of detecting endogenous and exogenous H₂S_n in lysosomes. These results indicate that the fluorescent probe can provide a good tool for intracellular and extracellular detection of H₂S_n.

A bifunctional fluorescent probe for simultaneous detection of GSH and H2Sn (n > 1) from different channels with long-wavelength emission

In this work, we presented a long-wavelength emission fluorescent probe DCM-Cou-SePh that can discriminatively detect glutathione (GSH) and hydrogen polysulfides (H₂S_n, n > 1) from green and red emission channels, respectively. With the addition of GSH, probe DCM-Cou-SePh displayed green fluorescence emission (λ_ex/em = 430/530 nm). In the presence of H₂S_n, the probe exhibited a significant fluorescence enhancement in red channel (λ_ex/em = 560/680 nm). We also demonstrated that this probe was suitable to quantitatively detect GSH and H₂S_n with low detection limits (0.12 μM for GSH, 0.19 μM for H₂S_n). Furthermore, DCM-Cou-SePh can be used for sensing endogenous GSH and H₂S_n in living cells by dual-color fluorescence imaging.

A semi-naphthorhodafluor-based red-emitting fluorescent probe for tracking of hydrogen polysulfide in living cells and zebrafish

Hydrogen polysulfides (H₂S_n, n ≥ 2) is recently regarded as a potential signaling molecule which shows a higher efficiency than hydrogen sulfides (H₂S) in regulating enzymes and ion channels. However, the development of specific fluorescent probes for H₂S_n with long-wavelength emission (>600 nm) are still rare. In this work, a semi-naphthorhodafluor-based red-emitting fluorescent probe SNARF-H₂S_n containing a phenyl 2-(benzoylthio) benzoate responsive unit was constructed. SNARF-H₂S_n was capable of selectively detecting H₂S_n over other reactive sulfur species. Treatment with H₂S_n would result in a > 1000-fold fluorescence enhancement within 10 min. SNARF-H₂S_n showed a low limit of detection down to 6.7 nM, and further enabled to visualize exogenous/endogenous H₂S_n in living A549 cells and zebrafish.

A novel colorimetric and ratiometric fluoride ion sensor derived from gallic acid

We report a novel colorimetric and ratiometric fluoride ion sensor derived from gallic acid.

FRET-based fluorescent ratiometric probes for the rapid detection of endogenous hydrogen sulphide in living cells

FRET strategy was adopted for designing ratiometric fluorescent H₂S sensors using Coumarin-derived merocyanine fluorophore.