Rhodamine-based fluorescent probe for sequential detection of Al3+ ions and adenosine monophosphate in water

A Study of Small Molecule-Based Rhodamine-Derived Chemosensors and their Implications in Environmental and Biological Systems from 2012 to 2021: Latest Advancement and Future Prospects

Rhodamine-based chemosensors have sparked considerable interest in recent years due to their remarkable photophysical properties, which include high absorption coefficients, exceptional quantum yields, improved photostability, and significant red shifts. This article presents an overview of the diverse fluorometric, and colorimetric sensors produced from rhodamine, as well as their applications in a wide range of fields. The ability of rhodamine-based chemosensors to detect a wide range of metal ions, including Hg+2, Al3+, Cr3+, Cu2+, Fe3+, Fe2+, Cd2+, Sn4+, Zn2+, and Pb2+, is one of their major advantages. Other applications of these sensors include dual analytes, multianalytes, and relay recognition of dual analytes. Rhodamine-based probes can also detect noble metal ions such as Au3+, Ag+, and Pt2+. They have been used to detect pH, biological species, reactive oxygen and nitrogen species, anions, and nerve agents in addition to metal ions. The probes have been engineered to undergo colorimetric or fluorometric changes upon binding to specific analytes, rendering them highly selective and sensitive by ring-opening via different mechanisms such as Photoinduced Electron Transfer (PET), Chelation Enhanced Fluorescence (CHEF), Intramolecular Charge Transfer (ICT), and Fluorescence Resonance Energy Transfer (FRET). For improved sensing performance, light-harvesting dendritic systems based on rhodamine conjugates has also been explored for enhanced sensing performance. These dendritic arrangements permit the incorporation of numerous rhodamine units, resulting in an improvement in signal amplification and sensitivity. The probes have been utilised extensively for imaging biological samples, including imaging of living cells, and for environmental research. Moreover, they have been combined into logic gates for the construction of molecular computing systems. The usage of rhodamine-based chemosensors has created significant potential in a range of disciplines, including biological and environmental sensing as well as logic gate applications. This study focuses on the work published between 2012 and 2021 and emphasises the enormous research and development potential of these probes.

Investigation on non-radioactive behavior of an acylhydrazone-based fluorescent probe: Coexistence of PET and TICT mechanisms

A fluorescent probe (E)-((2,4-dihydroxybenzyl)diazenyl)(pyridin-2-yl)methanone (HL) to effectively and selectively detect Al³⁺ was designed and synthesized in the experiment. Herein, we explained the excited state dynamics mechanism of HL by using density functional theory (DFT) and time-dependent density functional theory (TD-DFT). The potential energy surfaces (PESs) proved that the excited-state intramolecular proton transfer (ESIPT) process hardly occurs due to the high reaction barriers, so the fluorescence quenching behavior of HL was not based on ESIPT. The frontier molecular orbitals (FMOs) and spectral properties were analyzed to better understand the origination of fluorescence quenching. It was found that an electron on C = N in HL could be transferred to the fluorophore during excitation in the absence of Al³⁺, accompanied by the PET process. The excited state could undergo a twisted intramolecular charge transfer (TICT) process, releasing non-radiative decay. After binding to Al³⁺, the photo-induced electron transfer (PET) process has no longer occurred, and the TICT process is eliminated, resulting in a significant fluorescence enhancement. Therefore, the calculation results well explain the quenching and enhancement behaviors of fluorescence before and after the reaction with Al³⁺.

A Recent Update on Rhodamine Dye Based Sensor Molecules: A Review

Herein we have discussed such important modified rhodamine compounds which have been used as chemosensors for the last 7-8 years. This review covered some chemosensors for the detection of metal ions like Al(III), Cu(II), Hg(II), Co(II), Fe(III), Au(III), Cr(III), and some anion like CN-. The selectivity, sensitivity, photophysical properties (i.e., UV-Vis spectral studies, fluorescence studies giving special emphasis to absorption wavelength in UV-Vis spectra and excitation and emission wavelength in fluorescence spectra), binding affinity, the limit of detection, and the application of those chemosensors are described clearly. Here we have also discussed some functionalized rhodamine-based chemosensors that emit in the near-infrared region (NIR) and can target lysosomes and detect lysosomal pH. Their versatile applicability in the medicinal ground is also delineated. We have focused on the photophysical properties of spirolactam rhodamine photoswitches and applications in single-molecule localization microscopy and volumetric 3D light photoactivable dye displays. The real-time detection of radical intermediates has also been exemplified.

Self-assembled nanoplatforms with ZIF-8 as a framework for FRET-based glutathione sensing in biological samples

A nanoprobe was constructed by embedding QDs and a rhodamine B derivative (RBD) into ZIF-8. Then, the ultraviolet absorption of RBD that reacted with glutathione can overlap with the emission spectrum of the QDs, causing FRET-based glutathione sensing.

Selective sensing of adenosine monophosphate (AMP) by a calix[6]triazolium-based colorimetric sensing ensemble

A calix[6]triazolium-based colorimetric sensing ensemble has been developed that exhibits a distinct color change in the presence of AMP.

A chalcone-based fluorescent chemosensor for detecting Mg2+ and Cd2

SBOD (sodium (E)-2-(3-[5-bromothiophen-2-yl]-3-oxoprop-1-en-1-yl)-4,6-dichlorophenolate) was designed and synthesized as a chalcone-based fluorescent turn-on chemosensor for Mg²⁺ and Cd²⁺ . SBOD selectively detected Mg²⁺ and Cd²⁺ through the increase in effective fluorescence. Detection limits of SBOD for Mg²⁺ and Cd²⁺ were calculated to be 3.8 μM and 2.9 μM, respectively. The binding modes of SBOD for Mg²⁺ and Cd²⁺ were determined to be 1:1 by ESI-MS and Job plot. Association mechanisms for SBOD to Mg²⁺ and Cd²⁺ were illustrated by ESI-MS, UV-vis, fluorescence spectroscopy, and calculations.

Calix[n]triazolium based turn-on fluorescent sensing ensemble for selective adenosine monophosphate (AMP) detection

A novel calix[n]triazolium was synthesized and exhibited excellent selectivity for AMP. The binding between calix[n]triazolium and chromenolate anions forms a non-fluorescent complex and the resulting supramolecular ensemble selectively detects AMP in water and induces "turn-on" fluorescence. The sensing platform is the first macrocyclic system to discriminate AMP from ADP and ATP through fluorescence changes.

An Acylhydrazone-Based Fluorescent Sensor for Sequential Recognition of Al3+ and H2PO4. MATERIALS (BASEL, SWITZERLAND) 2021;14:6392. [PMID: 34771920 PMCID: PMC8585233 DOI: 10.3390/ma14216392]

A novel acylhydrazone-based fluorescent sensor NATB was designed and synthesized for consecutive sensing of Al3+ and H2PO4-. NATB displayed fluorometric sensing to Al3+ and could sequentially detect H2PO4- by fluorescence quenching. The limits of detection for Al3+ and H2PO4- were determined to be 0.83 and 1.7 μM, respectively. The binding ratios of NATB to Al3+ and NATB-Al3+ to H2PO4- were found to be 1:1. The sequential recognition of Al3+ and H2PO4- by NATB could be repeated consecutively. In addition, the practicality of NATB was confirmed with the application of test strips. The sensing mechanisms of Al3+ and H2PO4- by NATB were investigated through fluorescence and UV-Visible spectroscopy, Job plot, ESI-MS, 1H NMR titration, and DFT calculations.

Photoinduced charge-separated molecular probe for ultrasensitive spectrum analysis and rapid colorimetric detection of platinum ions

Increased utilization of platinum ions in chemicals and drugs escalates environmental pollution and toxicity associated with Pt ions. However, current analysis and detection strategies of Pt ions display limited sensitivity due to the similar inert metal nature of platinum to gold. Herein, a photoinduced charge-separated molecule (MTPA)₂Ab was synthesized as a probe for enhanced sensitive selection of Pt ions. Long-lived charge-separated states generated upon exposure to 365 nm light lead to a stable complex between (MTPA)₂Ab and PtCl₂/PtCl₄ with highly-selectivity via sequential photoinduced electron transfers. Owing to the linear relationship of complex characteristic absorption and fluorescence emission intensities to Pt²⁺/Pt⁴⁺ concentrations, ultrasensitive spectrum analysis of Pt ions is achieved with a detection limit of 14.2 nM (2.8 ppb) for Pt²⁺ and 12.6 nM (2.5 ppb) for Pt⁴⁺ by an absorption spectrometer and 9.8 nM (1.9 ppb) for Pt ions (Pt²⁺/Pt⁴⁺) by a fluorescence spectrometer, far less than the reported values. Furthermore, a portable test box is developed based on (MTPA)₂Ab test strips due to distinguishable color change with Pt²⁺/Pt⁴⁺ concentrations for rapid colorimetric detection of Pt ions. The results highlight the promise of photoinduced charge-separated molecular probe in ultrasensitive and rapid detection of Pt ions to overcome current limitations of detection strategies.

Recent progresses in luminescent metal-organic frameworks (LMOFs) as sensors for the detection of anions and cations in aqueous solution

The discharge of excessive metal ions and anions into water bodies leads to the serious pollution of water and environment, which in turn has a certain impact on industry, agriculture, and human life. Because of the unique advantages of luminescent metal-organic frameworks (LMOFs), they have been successfully explored as various fluorescent probes to quickly and effectively detect these pollutants. This perspective not only introduces the design strategy and classification of LMOFs, especially the construction methods of water-stable LMOFs, but also reports the latest progresses in some LMOFs between 2016 and 2020 as well as expounds the mechanisms of LMOFs for detecting anions and cations. Moreover, the luminescence properties of LMOFs are related to the selection of metal ions, the structure of organic ligands, the pore size, and the interaction of guest molecules. Finally, the further development of LMOFs is summarized and prospected in this field.

AIE-based fluorescent sensors for low concentration toxic ion detection in water

Ions, including anions and heavy metals, are extremely toxic and easily accumulate in the human body, threatening the health of humans and even causing human death at low concentrations. It is therefore necessary to detect these toxic ions in low concentrations in water. Fluorescent sensing is a good method for detecting these ions, but some conventional dyes often exhibit an aggregation caused quench (ACQ) effect in their solid state, limiting their large-scale application. Fluorescent probes based on aggregation-induced emission (AIE) properties have received significant attention due to their high fluorescence quantum yields in their nano aggragated states, easy fabrication, use of moderate conditions, and selevtive recognization of organic/inorganic compounds in water with obvious changes in fluorescence. We surmarize the recent advances of AIE-based sensors for low concentration toxic ion detection in water. The detection probes can be divided into three categories: chemical reaction types, chemical interaction types and physical interaction types. Chemical reaction types utilize nucleophilic addition and coordination reaction, while chemical interaction types rely on hydrogen bonding and anion-π interactions. The physical interaction types are composed of electrostatic attractions. We finally comment on the challenges and outlook of AIE-active sensors.

A novel fluorescent probe of aluminium ions based on rhodamine derivatives and its application in biological imaging

A new type of probe can be used for the detection of Al³⁺ in biological cells.

New thiophene hydrazide dual-functional chemosensor: Colorimetric sensor for Cu2+ & fluorescent sensor for Al3

A new thiophene hydrazide derivative TSB was synthesized and utilized as naked-eye colorimetric sensor for Cu²⁺ by the color changed from colorless to yellow as well as green fluorescent turn on sensor for Al³⁺ in DMSO/H₂O (1/1, V/V) solution. The dual-functional chemosensor TSB for Cu²⁺/Al³⁺ sensing displayed excellent properties of special selectivity, superior sensitivity, outstanding anti-interference performance, instantaneous response, wide pH working range and good reversibility. The detection limits of TSB for Cu²⁺/Al³⁺ were determined as low as 46.5 nM and 32.7 nM, respectively. The 1:1 binding mode of TSB with Cu²⁺/Al³⁺ was proved by spectrometric titrations, Job's plots, FTIR, ¹H NMR and HRMS analysis. Moreover, chemosensor TSB was successfully utilized for detection of Cu²⁺ and Al³⁺ in real environmental water and food samples with high reliability, demonstrating its practical applicability.

Selective monitoring ATP using a fluorogenic Al(III)-probe complex in aqueous medium

A simple commercially available probe 8-hydroxyjulolidine-9-aldehyde (HJ) has been developed as a turn-on fluorescent probe specifically for Al³⁺ and characterized systemically. The probe HJ for Al³⁺ ion exhibits strong green fluorescence under ultraviolet light. The HJ acted as an OFF-ON-OFF type fluorescent probe for Al³⁺ and ATP in nearly 100% aqueous media. The 1:1 binding stoichiometry between probe and Al³⁺ has been established from Job's plot and HRMS studies. The limit of detection for Al³⁺ ion is found to be 5.75 × 10^-8 M. The large association constant between HJ and Al³⁺ ion is 1.05 × 10⁵ M^-1. Detailed insights of probe-metal interaction mechanisms have been studied by the density functional theory (DFT) as well as the time dependent-DFT (TDDFT) calculations. Moreover, benefiting from the water solubility and biocompatibility of the probe HJ and its HJ-Al³⁺ complex, they have also been successfully applied to detect Al³⁺ and ATP by bioimaging in onion epidermal cells and adult zebrafish respectively.