A novel polythioether-based rhodamine B fluorescent probe via successive click reaction and its application in iron ion detection and cell imaging

A guide to modern methods for poly(thio)ether synthesis using Earth-abundant metals

Polyethers and polythioethers have a long and storied history dating back to the start of polymer science as a distinct field. As such, these materials have been utilized in a wide range of commercial applications and fundamental studies. The breadth of their material properties and the contexts in which they are applied is ultimately owed to their diverse monomer pre-cursors, epoxides and thiiranes, respectively. The facile polymerization of these monomers, both historically and contemporaneously, across academia and industry, has occurred through the use of Earth-abundant metals as catalysts and/or initiators. Despite this, polymerization methods for these monomers are underutilized compared to other monomer classes like cyclic olefins, vinyls, and (meth)acrylates. We feel a focused review that clearly outlines the benefits and shortcomings of extant synthetic methods for poly(thio)ethers along with their proposed mechanisms and quirks will help facilitate the utilization of these methods and by extension the unique polymer materials they create. Therefore, this Feature Article briefly describes the applications of poly(thio)ethers before discussing the feature-set of each poly(thio)ether synthetic method and qualitatively scoring them on relevant metrics (e.g., ease-of-use, molecular weight control, etc.) to help would-be poly(thio)ether-makers find an appropriate synthetic approach. The article is concluded with a look ahead at the future of poly(thio)ether synthesis with Earth-abundant metals.

Preparation of temperature-responsive nanomicelles with AIE property as fluorescence probe for detection of Fe3+ and Fe2

Temperature-responsive nanomicelles with aggregation induced emission (AIE) property were prepared by the host-guest complexation of ferrocene functionalized tetraphenyl (TPE-Fc) and β-cyclodextrin-poly (N-isopropylacrylamide) (β-CD-(PNIPAM)₇). The AIE chromophore TPE-Fc bound to the hydrophobic cavity of cyclodextrin serves as the core of micelles, and temperature sensitive PNIPAM serves as the shell to give the micelles good solubility. The size of the nanomicelles is about 100 nm. At the excitation wavelength of 340 nm, the strongest fluorescent emission peak was 421 nm. The introduction of cyclodextrin star polymer increased the fluorescence intensity of nanomicelles, thus improving the recognition of probe to Fe³⁺ and Fe²⁺. The fluorescent probe can quickly detect Fe³⁺ and Fe²⁺ in water within 5 min even in the presence of various interfering ions. The detection limits of Fe³⁺ and Fe²⁺ were 1.04 μM and 0.78 μM, respectively in the range of 10-90 μM. The formation of complex between the probe and Fe³⁺/Fe²⁺ was supported by Job's plot. The probe was successfully applied to the detection of Fe³⁺and Fe²⁺ in actual water sample with a good recovery. In addition, a possible sensing mechanism for the interaction of iron ions with amide bond groups of nanomicelles was proposed.

Synthesis and bioimaging of a BODIPY-based fluorescence quenching probe for Fe3

Iron is the main substance for maintaining life. Real-time determination of ferric ion (Fe3+) in living cells is of great significance for understanding the relationship of Fe3+ concentration changes with various physiological and pathological processes. Fluorescent probes are suitable for the detection of trace metal ions in cells due to their low toxicity and high sensitivity. In this work, a boron-dipyrromethene-based fluorescent probe (BODIPY-CL) for selective detection of Fe3+ was synthesized. The fluorescence emission of BODIPY-CL was determined at 516 nm. In a pH range of 1 to 10, the probe BODIPY-CL exhibits a quenching response to Fe3+. Meanwhile, BODIPY-CL showed a highly selective response to Fe3+ compared with 16 kinds of metal ions. The stoichiometry ratio of BODIPY-CL bound to Fe3+ was nearly 2 : 1. The fluorescence quenching response obtained by the sensor was linear with the Fe3+ concentration in the range of 0-400 μM, and the detection limit was 2.9 μM. BODIPY-CL was successfully applied to image Fe3+ in cells. This study provides a promising fluorescent imaging probe for further research on the physiological and pathological effects of Fe3+.

Design of 3D-Printed Electronic Fiber Optic Sensor to Detect Rhodamine B Reagent: An Initiation to Potential Virus Detection

A fluorescence device based on ultraviolet light is proposed in this paper, which currently stands at the design stage with the eventual aim to potentially detect virus/antibody fluorescence reactions. The designed device is proposed to have the characteristics of high reflectivity, low power consumption, wide spectrum of light source, and proper silver coating. For fabrication and raising product quality, 3D printing technology and a sputtering test will be used. In this connection, this paper firstly introduces the design sources; then, the ideas of inventing fluorescence detection devices based on ultraviolet light, followed by the data analysis as well as discussing the results of computer simulations. The design process, materials, methods, and experiments are demonstrated following the reality work procedure. Instead of directly using a virus or antibodies for the experiment, at the current design stage, we focus on using this device to detect the rhodamine B reagent. Experiment shows that this reagent can be successfully detected. With this achievement, we logically believe that such type of an ultraviolet optical sensor, with further development and testing, may have the possible value to detect a single virus such as COVID-19, as well as other viruses or small molecules. Though there is long way to go to achieve such a goal, future works experimenting with the detection device on real virus or antibodies can take place more efficiently with a good foundation.

Perspective on fluorescence cell imaging with ionophore-based ion-selective nano-optodes

Inorganic ions are ubiquitous in all kinds of cells with highly dynamic spatial and temporal distribution. Taking advantage of different types of fluorescent probes, fluorescence microscopic imaging and quantitative analysis of ion concentrations in cells have rapidly advanced. A family of fluorescent nanoprobes based on ionophores has emerged in recent years with the potential to establish a unique platform for the analysis of common biological ions including Na+, K+, Ca2+, Cl-, and so on. This article aims at providing a retrospect and outlook of ionophore-based ion-selective nanoprobes and the applications in cell imaging.

Design, synthesis and biological evaluation of novel dual-targeting fluorescent probes for detection of Fe3+ in the lysosomes of hepatocytes mediated by galactose-morpholine moieties

In this work, novel dual-targeting probes composed of galactose and morpholine were designed and synthesized for monitoring Fe³⁺ levels in the lysosome of hepatocyte. MP-Gal-1, MP-Gal-2 and MP-Gal-3 showed good selectivity and sensitivities toward Fe³⁺ with the detection limits of 9.40 × 10^-8 M, 7.68 × 10^-8 M and 7.10 × 10^-8 M, respectively. 1:2 stoichiometry is the most likely recognition mode between probe and Fe³⁺. Low toxic MP-Gal-1, MP-Gal-2 and MP-Gal-3 exhibited favorable hepatic targeting effect in both cell and tissue levels, which was because the galactose group of probe could be recognized by ASGPR overexpressed on the hepatocytes. The hepatocyte-targeting capacity followed MP-Gal-1 < MP-Gal-2 < MP-Gal-3 trend, which was attributed to the galactose cluster effect. MP-Gal-1, MP-Gal-2 and MP-Gal-3 also displayed good lysosomes-targeting capacities, because the basic morpholine moiety of probes could be easily attracted by the acidic lysosome. Therefore, MP-Gal-1, MP-Gal-2 and MP-Gal-3 have good dual targeting capacities (liver and lysosome) and could be used to detect lysosomal Fe³⁺ in the liver, which is great significant for precise diagnosis and treatment of liver lysosomal iron-related diseases.

A Highly Stable Eu−MOF Multifunctional Luminescent Sensor for the Effective Detection of Fe3+, Cr2O72−/CrO42− and Aspartic Acid in Aqueous Systems

Heavy metal ions were common pollutants in water pollution. Amino acids, as important substances in organisms, participate in many life activities. The detection of heavy metal ions and amino acids...

Altering Chain Flexibility of Aliphatic Polyesters for Yellow-Green Clusteroluminescence in 38 % Quantum Yield

Preparation of non-conjugated polymers with long-wavelength emission and high quantum yield (QY) is still a huge challenge. Herein, we report the first example of linear non-conjugated polyester exhibiting yellow-green clusteroluminescence (CL) and a high QY of 38 %. We discovered that the polyester P3 with balanced flexibility and rigidity showed the longest CL wavelength and highest QY. Systematically photophysical characterization unravel the key role of ester cluster in the CL and the cluster formation via the aggregate of ester units was visualized. Moreover, P3 was demonstrated to be a highly selective, quick-responsive (ca. 1.2 min) and sensitive detector (detection limit is 0.78 μM) for irons owing to the fast disassociation of clusters by irons. This work not only gains further mechanistic insight into CL but also provides a new strategy to design high-efficiency and long-wavelength CL, meanwhile, enlightens the glorious application prospect of luminescent polyester.

Lanthanide-Doped Nanoparticles for Near-Infrared Light Activation of Photopolymerization: Fundamentals, Optimization and Applications

Photopolymerization refers to a type of polymerization process in which light is utilized as excitation source to initiate polymerization of monomers and oligomers. Despite great progress, photopolymerization is typically induced by ultraviolet or visible light, which still greatly restrains its applications. Upconversion nanoparticles (UCNPs) represent a class of optical nanomaterials that are able to convert low-energy near-infrared (NIR) light into high-energy ultraviolet (or visible light) emissions. In this context, UCNP-assisted photopolymerization has recently attracted extensive attentions due to its unique advantages. In this account, recent advances in the fundamentals, optimization and emerging applications of UCNP-based photopolymerization are reviewed. Fundamental theories of upconversion luminescence and photopolymerization will be introduced first. Various optimization approaches to improve UCNP-assisted photopolymerization are then summarized, followed by diverse emerging applications. Challenges and future perspectives in this area will be provided as a conclusion.