Prickly pear fruit extract as photosensitizer for dye-sensitized solar cell

Development of natural dye photosensitizers for dye-sensitized solar cells: a review

Dye-sensitized solar cell (DSSC) is a photovoltaic device that can be produced from natural source pigments or natural dyes. The selection of natural dyes for DSSC application is currently under research. The utilization of natural dye materials that are easy to obtain, cost-effective, and non-toxic can reduce waste during DSSC fabrication. Natural dyes can be extracted from plants through extraction and chromatography methods. The suitability and viability of utilizing natural dyes as photosensitizers in DSSCs can be predicted using appropriate software simulation by varying related parameters to produce high power conversion efficiency. In this context, the purpose of the review is to highlight the evolution of performance improvement in the development of DSSCs with consideration of natural dye extraction and software simulation. This review also focuses on the results of extracting natural dyes from herbal ingredients, which are still very limited in information, and several parts of herbal plants that can be used as natural dye sources in the future of solid-state DSSCs have been identified. Based on the results of this review, the highest efficiency was obtained for the DSSC that used chlorophyll pigments as natural dyes using Peltophorum pterocarpum leaves with 6.07%, followed by anthocyanin pigments as natural dyes using raspberries (black) fruits with 1.5%, flavonoid pigments as natural dyes using Curcuma longa herbs with 0.64%, and flavonoid pigments as natural dyes using Indigofera tinctoria flowers with 0.46%.

Potential investigation of combined natural dye pigments extracted from ivy gourd leaves, black glutinous rice and turmeric for dye-sensitised solar cell

Environmental sustainability, resource availability, and cost-effectiveness are the driving forces behind the search for natural sensitised dyes to replace synthetic ones. Using a combination of pigments as the sensitised dye in dye-sensitised solar cells (DSSCs) offers several advantages over using a single pigment. In this present study, natural dyes with different pigments were extracted from three local plants: Coccinia grandis (Ivy gourd leaves, IGL), Oryza sativa Linn (Black glutinous rice, BGR), and Curcuma longa L. (Turmeric, TM). Each colour extract absorbed various wavelengths of light. It was found that the single IGL-dye (green) had a greater light absorption and energy band gap over visible light than other extracts (dyes). Then combinations of these dyes were examined. A sensitised dye combination with a primary to secondary dye in a volumetric ratio of 80/20 exhibited multiple energy band gaps, implying multiple electron excitations at different photon energy levels. Compared to other mixed dyes, IGL/TM-dye had the highest absorbance and electron excitation at three wavelengths with the smallest energy band gap values of 1.74, 2.51, and 2.59 eV. The IGL-dye had the highest DSSC efficiency of 0.15 % for single dyes, followed by the TM-dye and BGR-dye, which had 0.12 % and 0.04 %, respectively. Interestingly, for combined dyes, the IGL/TM dye increased DSSC efficiency to 0.3 %. Since natural dyes tend to be less effective in DSSCs than synthetic dyes because they have a narrower absorption range, higher redox potentials, shorter operational lifetimes, higher rates of electron recombination, and different molecular structures, the dye co-sensitization strategy is one of the best ways to make more effective cells in the future.

Photonics of Viburnum opulus L. Extracts in Microemulsions with Oxygen and Gold Nanoparticles

In this paper, the optical properties of viburnum extract flavonoids in the visible region of the spectrum were investigated and their use as a potential photosensitizer of singlet oxygen for photodynamic therapy was evaluated. The presence of long-lived excited states in the extract molecules was established by spectral methods and time-resolved spectroscopy methods and the dependences of the absorption capacity and luminescence intensity of the extract molecules on the concentrations of oxygen and ablative nanoparticles of the gold in the reverse micelles of AOT (sodium dioctyl sulfosuccinate) were established. The plasmonic enhancement of the luminescence of the extract molecules and the processes of their complexation with oxygen were also established. Furthermore, the rate constants of the processes of conversion of exciting energy in complexes were determined.

Advances on Dye-Sensitized Solar Cells (DSSCs) Nanostructures and Natural Colorants: A Review

Human beings are attempting to take advantage of renewable natural resources by using solar cells. These devices take the sun’s radiation and convert it into electrical energy. The issue with traditional silicon-based solar cells is their manufacturing costs and environmental problems. For this reason, alternatives have been developed within the solar cell field. One of these alternatives is the dye-sensitized solar cell (DSSC), also known as Grätzel solar cells. DSSCs are a type of solar cell that mimics photosynthesis. They have a photoanode, which is formed by a semiconductor film sensitized with a dye. Some of their advantages include low-cost manufacturing, eco-friendly materials use, and suitability for most environments. This review discusses four important aspects, with two related to the dye, which can be natural or synthetic. Herein, only natural dyes and their extraction methods were selected. On the other hand, this paper discusses the nanostructures used for DSSCs, the TiO2 nanostructure being the most reported; it recently reached an efficiency level of 10.3%. Finally, a review on the novelties in DSSCs technology is presented, where it is observed that the use of Catrin protein (cow brain) shows 1.45% of efficiency, which is significantly lower if compared to Ag nanoparticles doped with graphene that report 9.9% efficiency.