A novel dual-function probe for recognition of Zn2+ and Al3+ and its application in real samples

Advancements in the development of fluorescent chemosensors based on CN bond isomerization/modulation mechanistic approaches

The CN bond isomerization/modulation as a fluorescence signalling mechanism was explored by studying the photophysical properties of conformationally restricted molecules. From the beginning, the CN bond isomerization method has attracted the attention of researchers owing to its simplicity, high selectivity, and sensitivity in fluorescence evaluation. Continuous developments in the field of sensing using CN bond-containing compounds have been achieved via the customization of the isomerization process around the CN bond in numerous ways, and the results were obtained in the form of specific discrete photophysical changes. CN isomerization causes significant fluorescence enhancement in response to detected metal cations and other reactive species (Cys, Hys, ClO-, etc.) straightforwardly and effectively. This review sheds light on the process of CN bond isomerization/modulation as a signalling mechanism depending on fluorescence changes via conformational restriction. In addition, CN bond isomerization-based fluorescent sensors have yet to be well reviewed, although several fluorescent sensors based on this signalling mechanism have been reported. Therefore, CN-based fluorescent sensors are summarized in this review.

A very rare fluorescent chemosensor of zinc(II) exhibiting AIEE, ESIPT and TICT: Spectroscopic, crystallographic and theoretical exploration

The basic systems in this study are HL (1; 1:2 condensation product of 2,6-diformyl-4-ethylphenol and o-anisidine) and its ZnII and CdII complexes of composition [ZnII(LH)Cl2]·CH3OH (2) and [CdII(LH)Cl2] (3), all of which are synthesized and characterized by CHN elemental analyses, single crystal X-ray crystallography, powder X-ray diffraction (PXRD) and fourier transform infrared (FT-IR) spectrum. It has been established from the following experimental and theoretical studies that 1 is a fluorescent turn on sensor of ZnII ion and it exhibits all of excited state intramolecular proton transfer (ESIPT), photoinduced electron transfer (PET), twisted intramolecular charge transfer (TICT) and aggregation induced enhanced emission (AIEE): (i) Detailed absorption and emission (steady state / time resolved) studies in various single solvents, in solvent mixtures, with pH variation, with various single metal ions, with mixtures of metal ions, on varying temperature and on varying viscosity; (ii) dynamic light scattering (DLS) and scanning electron microscopy (SEM) in solvent mixtures; (iii) density functional theory (DFT) and time dependent density functional theory (TD-DFT) calculations in ground and excites states of 1-3. It is shown that 1 can be efficaciously applied in inkless writing with the "write - erase - write" facility. The mechanisms/reasons of the observed properties have been addressed. The difference in fluorescence of ZnII and CdII complexes, unusual case of crystal structures of probe and complexes with ZnII and CdII, unusual features in the structures of 2 and 3 as well as a structure-property correlation have been discussed.

An ultra-sensitive fluorescent probe for recognition of aluminum ions and its application in environment, food, and living organisms

The concentration of aluminum ions (Al3+) is closely related to the ecological environment, food safety, and human health, with excessive accumulation of Al3+ causing irreversible damage to both the ecological balance and human health. Therefore, a fluorescent probe ABHS, based on aminobenzoylhydrazide Schiff-base, was designed and synthesized in one step with a high yield. ABHS can form a 1:1 coordination complex with Al3+ in a pure water system. It exhibits ultra-sensitive and accurate detection of Al3+ even at low concentration of Al3+, with the detection limit of 6.7 nM. Furthermore, ABHS demonstrated significant enhancement of specific fluorescence for Al3+, with rapid response speed, good stability, and robust resistance to interference. Importantly, ABHS has shown excellent detection and imaging capabilities even in complex real environmental samples, food samples, and living organisms.

A Novel Multi-Functional Fluorescence Probe for the Detection of Al3+/Zn2+/Cd2+ and its Practical Applications

A novel multi-functional fluorescence probe HMIC based on hydrazide Schiff base has been successfully synthesized and characterized. It can distinguish Al3+/Zn2+/Cd2+ in ethanol, in which fluorescence emission with different colors (blue for Al3+, orange for Zn2+, and green for Cd2+) were presented. The limits of detection of HMIC towards three ions were calculated from the titration curve as 7.70 × 10- 9 M, 4.64 × 10- 9 M, and 1.35 × 10- 8 M, respectively. The structures of HMIC and its complexes were investigated using UV-Vis spectra, Job's plot, infrared spectra, mass spectrometry, 1H-NMR and DFT calculations. Practical application studies have also demonstrated that HMIC can be applied to real samples with a low impact of potential interferents. Cytotoxicity and cellular imaging assays have shown that HMIC has good cellular permeability and potential antitumor effects. Interestingly, HMIC can image Al3+, Zn2+ and Cd2+ in the cells with different fluorescence signals.

Turn-on detection of Al3+ and Zn2+ ions by a NSN donor probe: reversibility, logic gates and DFT calculations

An efficient dual functional naphthalene-derived Schiff base NpSb probe has been synthesised and evaluated for its fluorescence and chromogenic response towards metal ions. The NpSb probe was capable of selectively recognising Al3+ and Zn2+ ions when they were excited at the same wavelength in an aqueous organic solvent system. Almost non-fluorescent NpSb displayed a 'turn-on' fluorescence response when treated with Zn2+ (λem = 416 nm) and Al3+ (λem = 469 nm) ions due to the chelation-enhanced fluorescence (CHEF) effect. The limit of detection (LoD) values for Al3+ and Zn2+ have been determined to be 38.0 nM and 43.0 nM, respectively. The binding constants for Al3+ and Zn2+ were found to be 1.18 × 106 M-1 and 3.5 × 105 M-1, respectively. The NpSb also acted as a colorimetric sensor for Al3+ as the colour of the probe's solution turned to pale green from colourless upon Al3+ addition. The binding mechanism between NpSb and Zn2+/Al3+ was supported by the ESI-MS, Job's plot, NMR, and DFT studies. The reversibility experiments were carried out with an F- ion and EDTA with the development of corresponding logic gates. Moreover, NpSb could be applied to detect Al3+ ions in real samples such as tap water, distilled water and soil samples.

Novel fluorescent probe for sequential recognition of Zn2+ and pyrophosphate in aqueous based on aggregation-induced emission

A new fluorescent probe (E)-4-(4-([2,2':6',2''-terpyridin]-4'-yl)styryl)-1-dodecylpyridin-1-ium (TPy-SD), with the aggregation-induced emission (AIE) property in aqueous solution, has been synthesized and characterized. The new probe, TPy-SD exhibited excellent selectivity and sensitivity towards Zn²⁺ with a relatively low detection limit (1.76 × 10^-7 M). The addition of Zn²⁺ is thought to disrupt the AIE property of TPy-SD, thereby leading to a fluorescence blue shift. Interestingly, the complex of probe TPy-SD with Zn²⁺ (Zn (II) TPy-SD), with molar ratio of 1:1, can be used as a simple, sensitive, and rapid means for the detection of pyrophosphates (PPi) in solution (water/DMSO = 99:1). As evidenced by transmission electron microscopy (TEM), dynamic light scattering (DLS) and fluorescence emission spectroscopy, this detection is thought to be due to the strong affinity between PPi and Zn²⁺, which brings out Zn²⁺ from the coordination cavity of chemical sensor TPy-SD, thus realizing the detection and recognition of PPi. Therefore, the new AIE fluorescent probe can be used as a dual probe for the detection of cations and anions.

Highly fluorescent hydroxyl groups functionalized graphitic carbon nitride for ultrasensitive and selective determination of mercury ions in water and fish samples

Heavy metal ion pollution is always a serious problem worldwide. Therefore, monitoring heavy metal ions in environmental water is a crucial and difficult step to ensure the safety of people and the environment. A mercury ion (Hg2+) fluorescence probe with excellent sensitivity and selectivity is described here. The functionalized graphitic carbon nitride nanosheets (T/G-C3N4) fluorescence probe was fabricated using melamine as a precursor by the pyrolysis technique, followed by a rapid KOH heat treatment method for 2 min. The chemical structure and morphology of the T/G-C3N4 probe were characterized using multiple analytical techniques including UV–Vis, SEM, XPS, XRD, and fluorometer spectroscopy. Geometry optimization of T/G-C3N4 as a modified probe was performed to assess its stability and interaction ability with Hg(II) via using the density function approach. The T/G-C3N4 probe showed a linear response based on quenching over the range 0–1.25 × 103 nM Hg(II); the detection limit was 27 nM. The remarkable sensitivity of T/G-C3N4 towards the Hg2+ ions was explained by the intense coordination and fast chelation kinetics of Hg2+ with the NH2, CN, C=N, and OH groups of T/G-C3N4 nanoprobe. The T/G-C3N4 probe demonstrates exceptional selectivity for Hg2+ ions among other metal ions including (Na+, Ag+, Mg2+, Fe2+, Fe3+, Co2+, Ni2+, Cd2+, K+, Ca2+, Cu2+, Pb2+, Mn2+ and Hg2+) and over a broad pH range (6–10), together with remarkable long-term fluorescence stability in water (> 30 days) and minimal toxicity. T/G-C3N4 was used to detect and quantify Hg2+ ions in tuna and mackerel fish and the results compared to ICP-AES. The results obtained offer a new simple and green technique for the design of multifunctional fluorescent probe appropriate for environmental applications.

Graphical Abstract

A novel dual-function probe for fluorescent turn-on recognition and differentiation of Al3+ and Ga3+ and its application

In this study, a novel dual-function probe BMP based on benzothiazole was easily synthesized and characterized through common optical technique. In the system consisting of DMF/H₂O (v/v, 2/3), probe BMP showed azure and blue-green to Al³⁺ and Ga³⁺, respectively. Besides, the binding ratios of BMP to Al³⁺ and Ga³⁺ were determined as 1:1, which confirmed by Job's plot. Furthermore, for Al³⁺ and Ga³⁺, the limit of detection (LOD) was determined to be 1.51 × 10^-6 M and 4.28 × 10^-6 M, respectively. Moreover, it was worth noting that BMP showed good performances in paper colorimetry, cell phone colorimetric identification and cell imaging.

A novel pyrene-based fluorescent probe for Al3+ detection

Based on the classical Schiff base reaction, fluorescent probe dimethyl 5-((pyren-1-ylmethylene)amino)isophthalate (PAI) is designed and synthesized through introducing Schiff base structure to pyrene unit for structural modification. The structure of the synthesized probe PAI is determined and characterized by FT-IR, ¹H NMR, ¹³C NMR and HRMS. PAI is a type of "turn-on" probe which can specifically recognize Al³⁺ ion with high selectivity. The limit of detection is calculated to be 3.07 × 10^-8 M, which proves the probe's high sensitivity and is lower than that of many efficient reported probes. The probe PAI is intrinsically non-fluorescent due to the photoinduced electron transfer (PET) process. However, the addition of Al³⁺ ion leads to the breakage of the carbon-nitrogen double bond of Schiff base in PAI resulting in the product without PET property, which shows a typical localized state with enhanced fluorescence and blue color. In addition, PAI can recognize Al³⁺ ion through test papers, which is in favor of the future research regarding to Al³⁺ ion sensing.

A novel isophorone-based fluorescent probe for recognition of Al3+ and its bioimaging in cells and plants

In this work, a novel isophorone-based fluorescent probe H-1 was designed and synthesized. The probe H-1 could achieve highly selective detection of Al³⁺ through forming a 1:1 complex, with a recognition mechanism based on intramolecular charge transfer (ICT). The detection limit of the probe H-1 for Al³⁺ is as low as 8.25 × 10^-8 M which was determined by fluorescent titration. It is confirmed that H-1 could be used not only for fluorescence spectrometry to detect Al³⁺ ions in actual water samples, but also for biological imaging to detect Al³⁺ ions in cells and plants.

A novel water-soluble flavonol-based fluorescent probe for highly specific and sensitive detection of Al3+ and its application in onion and zebrafish

A novel and simple turn-on fluorescence probe (HD) for Al³⁺ detection was successfully developed based on flavonol derivatives. This probe exhibited a significantly enhanced fluorescence response toward Al³⁺ in aqueous solution which could be observed by naked-eye from poor fluorescence to strong light green emission. The probe HD displays highly specific detection for Al³⁺ over other competitive metal ions, and the detection limit of probe HD for Al³⁺ was determined to be 2.57 × 10^-8 M, which are much lower than the World Health Organization (WHO) guideline value for drinking food/water. The binding stoichiometry of probe HD with Al³⁺ was determined to be 1:1 according to Job's plot and ESI-HRMS analysis, and the binding constant was calculated to be 2.01 × 10⁴ M^-1. The probe HD exhibited high selectivity, high sensitivity, good anti-interface ability, and wide pH application range as well as the quantitative determination in the detection of Al³⁺. The coordination mechanism of probe HD with Al³⁺ was supported by density functional theory (DFT) calculations and HRMS analysis. In addition, the probe HD was found to have good cell permeability and could be applied for live-cell imaging to detect Al³⁺ in onions and zebrafish.

Research Progress on Multifunctional Fluorescent Probes for Biological Imaging, Food and Environmental Detection

There has been rapid progress in the development of fast, sensitive, cheap and low-cytotoxicity micro-molecule fluorescent probes for application in various fields, including disease diagnosis, food safety and environmental safety. As an analytical tool, dual-function fluorescent probes with dual-emission responses have attracted considerable attention due to their cost-effectiveness and efficiency over single-function sensors. This review primarily describes research progress on multifunctional probes in terms of the reaction type and coordination type, as well as the general design principles of probes. The analytes include reactive oxygen species (ROS), reactive sulfur species (RSS), harmful cations and anions, etc. Multifunctional probes for food, medical and environmental applications are listed for future research. To improve the development of rapid detection methods, trends and strategies in the development of multifunctional fluorescent probes are also discussed.

A "Turn-On" fluorescent probe for detection and removal of Zn2+ in aqueous and its application in living cells

Using 3-hydroxy-2-naphthoic acid hydrazine and 4-(diethylamino) salicylaldehyde. as raw materials, compound L with an acylhydrazones structure was synthesized. The structure of compound L was characterized by nuclear magnetic resonance spectroscopy, X-ray single crystal diffraction, Fourier transform infrared spectroscopy, and mass spectrometry. The results show that Compound L can quickly and selectively recognize zinc ions in the H₂O/DMSO (V:V = 3:7) solvent system. After that, the spectral performance of probe L was studied by fluorescence spectroscopy and UV-vis spectroscopy. The results show that the combination with Zn²⁺ can significantly enhance the fluorescence intensity of probe L while being almost unaffected by other coexisting ions. After that, Job's curve method, nuclear magnetic titration analysis, and mass spectrometry were used to study the binding mechanism of probe L and Zn²⁺. The results showed that probe L coordinated with Zn²⁺ is 1:1. The linear equations of different concentrations of Zn²⁺ and fluorescence intensity were obtained by fitting, and the detection limit of probe L for Zn²⁺ was determined to be 6.75 × 10^-9 mol/L. The experimental study of standard addition and recovery showed that probe L could be used for the quantitative detection of Zn²⁺ in natural water samples. After that, we prepared L-doped sodium alginate hydrogel (SAL). The research results show that SAL has obvious adsorption capacity for Zn²⁺ in solution, and the color change before and after adsorption can be easily distinguished by the naked eye under ultraviolet light. SEM-EDS study showed that the microscopic morphology and composition of SAL changed significantly before and after adsorption. This fluorescent probe can be used for detection and removal of Zn²⁺ in aqueous solution. Also, probe L is effective for sensing for zinc (II) in living tumor cells. Overall, this work allows us to obtain a great potential to be applied to detect and remove Zn²⁺.

A Significant Fluorescence Turn-On Probe for the Recognition of Al3+ and Its Application

An easy prepared probe, BHMMP, was designed and synthesized, which displayed a significant fluorescence enhancement (over 38-fold) and obvious color change in the recognition of Al³⁺. The binding ratio of probe BHMMP to Al³⁺ was determined as 1:1, according to Job plot. The binding mechanism was fully clarified by the experiments, such as FT-IR spectrum, ESI-MS analysis, and ¹H NMR titration. A DFT study further confirmed the binding mode of BHMMP to Al³⁺. The limit of detection (LOD) for Al³⁺ was determined as low as 0.70 µM, based on the fluorescence titration of BHMMP. Moreover, the results from real sample experiments, including real water samples, test papers, and cell images, well-demonstrated that BHMMP was capable of sensing Al³⁺ in environmental and biological systems.

A visible-light-gated donor–acceptor Stenhouse adduct chemosensor: synthesis, photochromism and naked-eye colorimetric/fluorometric sensing of Al3+ and Zn2+

A visible-light-gated donor–acceptor Stenhouse adduct chemosensor is designed for the colorimetric/fluorometric sensing of Al3+ and Zn2+.

A novel AIE-active camphor-based fluorescent probe for simultaneous detection of Al3+ and Zn2+ at dual channels in living cells and zebrafish

A novel dual-functional probe N'-(2-hydroxy-5-((4,7,7-trimethyl-3-oxobicyclo[2.2.1] heptan-2-ylidene)methyl) benzylidene)picolinohydrazide (PSH) was constructed from natural camphor. This probe showed strong yellow-green fluorescence at 535 nm due to its aggregation-induced emission (AIE) feature. Interestingly, the probe PSH displayed a significant turn-on fluorescence response towards Al³⁺ (green fluorescence at 500 nm) and Zn²⁺ (orange fluorescence at 555 nm) at two different emissive channels. The detection limits of PSH towards Al³⁺ and Zn²⁺ were found to be 12.1 nM and 14.2 nM, respectively. PSH exhibited excellent selectivity and anti-interference performance and could distinguish between Al³⁺/Zn²⁺ and identify whether Zn²⁺ exists in the PSH-Al³⁺ complex by adding ATP. The binding mechanisms between PSH and Al³⁺/Zn²⁺ ions were supported by ¹H NMR, HRMS analysis, and density functional theory (DFT) calculations. Based on its outstanding sensing properties, the probe PSH was used to establish molecular logic function gates. Moreover, the probe PSH could be applied to detect Al³⁺ and Zn²⁺ in real environmental water, and fluorescence detection was well demonstrated by test strips. Furthermore, the probe PSH was employed for imaging Al³⁺ and Zn²⁺ in HeLa cells and zebrafish.

Preparation of Large Conjugated Polybenzimidazole Fluorescent Materials and Their Application in Metal Ion Detection

A new type of conjugated polybenzimidazole (CPBI) was synthesized through a simple polycondensation reaction without metal catalysis, and N-alkylation modification was carried out to solve the problems of solubility and fluorescence properties. A series of nano-microsphere polymers CPBI_n with large conjugation, good solubility, and strong fluorescence has been successfully used as “turn-off” fluorescent probes for the first time. The results show that, under suitable N-alkylation conditions, the obtained CPBI_n can be used as a highly sensitive and selective fluorescent probe for the detection of Cu²⁺ and Zn²⁺ at the same time, and their detection limits are both nM levels. In addition, CPBI₂ can be designed as an ultra-sensitive IMPLICATION logic gate at the molecular level, cyclically detecting Cu²⁺. With the test paper containing CPBI₂, easy and quick on-site detection can be achieved. This research provides a new idea for the brief synthesis of multifunctional materials.

A purine based fluorescent chemosensor for the selective and sole detection of Al3+ and its practical applications in test strips and bio-imaging

A novel purine Schiff base fluorescent probe (WYW), (E)-4-methyl-2-((2-(9-(naphthalen-1-yl)-8-(thiophen-2-yl)-9H-purin-6-yl)hydrazono)methyl)phenol, was designed and prepared as an excellent reversible fluorescent chemosensor for monitoring Al³⁺. The fluorogenic "turn-on" sensor WYW exhibited high selectivity towards Al³⁺ over other coexistent metal ions, accompanying with an obvious visual color change in DMSO/H₂O (9/1, v/v, pH = 7.4) media. The enhancement fluorescence of WYW could be attributed to the inhibition of PET and ESIPT process induced by Al³⁺. Notably, the WYW-Al³⁺ complex exhibited a fluorescence "turn-off" response towards F^- with exceptional selectivity via the displacement approach. The detection limit of WYW for Al³⁺ was calculated to be as low as 82 nM. The formation of complex WYW-Al³⁺ (1:1 stoichiometry) was confirmed by Job's methods and further verified by density functional theory (DFT) calculations. Furthermore, the probe WYW with low cytotoxicity and excellent membrane-permeable property has also been successfully applied for detecting low concertation Al³⁺ in living HeLa cells.

A novel quinoline-based turn-on fluorescent probe for the highly selective detection of Al (III) and its bioimaging in living cells, plants tissues and zebrafish

A novel quinoline fluorescent probe QNP ((E)-N'-(5-chloro-2-hydroxybenzylidene) quinoline-2-carbohydrazide) for detection of Al3+ ion was designed, synthesized and characterized. QNP displayed a high fluorescence enhancement in the presence of Al3+ ion in DMF:PBS (99:1, v/v) solution and the detection limit was as low as 1.25 μM with high selectivity and excellent sensitivity from 0 to 3 μM. The sensing ability of QNP towards Al3+ ion is attributed to the synergistic effect of PET and ICT. Furthermore, the binding stoichiometry between QNP and Al3+ ion is of 1:1 by Job's plot and mass spectrum, and the calculated binding constant is 4.29 × 108 M-1. The detection of Al3+ ion in water samples illustrates that QNP could be applied to the detection of practical samples in the environment. Bioimaging experiments on Hela cells, zebrafish and soybean root tissues demonstrate that it has potential application to investigate biological processes involving Al3+ ion within living cells. A quinoline-based turn-on fluorescence probe for the detection of Al3+ and its bioimaging in living cells, plant, and zebrafish.

A novel fluorescence sensor for relay recognition of zinc ions and nitric oxide through fluorescence ‘off–on–off’ functionality

The fluorescent ‘off–on–off’ probe for relay recognition of Zn²⁺ and nitro oxide (NO) was constructed with the detection limit of 10⁻⁸ mol L⁻¹.

A dual-response ratiometric fluorescent probe for hypochlorite and hydrazine detection and its imaging in living cells

In this work, a dual-response ratiometric fluorescent probe (E)-3-(5-(2-nitrovinyl)thiophen-2-yl)-9-phenyl-9H-carbazole (NTPC) for high selectivity and sensitivity detection of ClO^- and N₂H₄ was successfully developed. This probe NTPC showed ratiometric fluorescent response to ClO^- and N₂H₄, which induces obvious naked-eye color changes, respectively. In addition, the NTPC for ClO^- and N₂H₄ detection displayed low detection limits of 71.4 nM and 0.6 μM, respectively. And the sensing mechanism of NTPC with ClO^- and N₂H₄ was well confirmed by ¹H NMR and HR-MS spectra. Moreover, this novel probe was applied to monitoring and differentiating ClO^- and N₂H₄ in living cells, and exhibits good biocompatibility and low cytotoxicity.

A dual-functional probe for sensing pH change and ratiometric detection of Cu2

A series of benzothiazole-based compounds were synthesized and characterized. Among them, probe Z showed significant dual-functional performance which was capable of sensing pH change and Cu²⁺. Probe Z displayed fluorescent turn-on under alkaline conditions due to deprotonation of the hydroxyl group along with the obviously color change from colorless to mint green. Interestingly, it further achieved in ratiometric detection of Cu²⁺ through absorbance or fluorescence signals in strong alkaline condition. The limit of detection was calculated correspondingly as 0.37 μM and 1.35 μM, respectively. Especially, the combination of the XNOR and INHIBIT logic gates could be used to confirm that one medium was in neutrality or alkalinity condition. Moreover, Z was successfully used in real water samples and test paper for fast identification of Cu²⁺, respectively.

Selective monitoring ATP using a fluorogenic Al(III)-probe complex in aqueous medium

A simple commercially available probe 8-hydroxyjulolidine-9-aldehyde (HJ) has been developed as a turn-on fluorescent probe specifically for Al³⁺ and characterized systemically. The probe HJ for Al³⁺ ion exhibits strong green fluorescence under ultraviolet light. The HJ acted as an OFF-ON-OFF type fluorescent probe for Al³⁺ and ATP in nearly 100% aqueous media. The 1:1 binding stoichiometry between probe and Al³⁺ has been established from Job's plot and HRMS studies. The limit of detection for Al³⁺ ion is found to be 5.75 × 10^-8 M. The large association constant between HJ and Al³⁺ ion is 1.05 × 10⁵ M^-1. Detailed insights of probe-metal interaction mechanisms have been studied by the density functional theory (DFT) as well as the time dependent-DFT (TDDFT) calculations. Moreover, benefiting from the water solubility and biocompatibility of the probe HJ and its HJ-Al³⁺ complex, they have also been successfully applied to detect Al³⁺ and ATP by bioimaging in onion epidermal cells and adult zebrafish respectively.