Structural, luminescent and antimicrobial properties of ZnS and CdSe/ZnS quantum dot structures originated by precursors

Solution-Processed 1D Wurtzite ZnS Nanostructures with Controlled Crystallographic Orientation and Tunable Band-Edge Emission

1D compound semiconductor nanomaterials possess unique physicochemical properties that strongly depend on their size, composition, and structures. ZnS has been widely investigated as one of the most important semiconductors, and the control of crystallographic orientation of 1D ZnS nanostructures is still challenging and crucial to exploring their anisotropic properties. Herein, a solution-processed strategy is developed to synthesize 1D wurtzite (w-)ZnS nanostructures with the specific <002> and <210> orientations by co-decomposing the copper dibutyldithiocarbamate {[(C4 H9 )2 NCS2 ]2 Cu, i.e., R2 Cu} and zinc dibutyldithiocarbamate (R2 Zn) precursors in the mixed solvents of oleylamine and 1-dodecanethoil. A solution-solid-solid (SSS)-Oriented growth mechanism is proposed, which includes oriented nucleation dominated and SSS growth dominated stages. The crystallographic orientation mainly depends on the interfacial energy and ligand effect. The 1D w-ZnS nanostructures with controlled crystallographic orientation display unique morphologies, i.e., <002>-oriented w-ZnS nanorod enclosed with {110} facets while <210>-oriented w-ZnS nanobelt enclosed with wide (002) and narrow (110) facets. The bandgap of 1D w-ZnS nanostructures can be tuned from 3.94 to 3.82 eV with the crystallographic growth direction varied from <002> to <210>, thus leading to the tunable band-edge emission from ≈338 to ≈345 nm.

A photoelectrochemical biosensor based on b-TiO2/CdS:Eu/Ti3C2 heterojunction for the ultrasensitive detection of miRNA-21

A novel photoelectrochemical (PEC) biosensor based on b-TiO₂/CdS:Eu/Ti₃C₂ heterojunction was developed for ultrasensitive determination of miRNA-21. In this device, the b-TiO₂/CdS:Eu/Ti₃C₂ heterojunction with excellent energy level arrangement effectively facilitated photoelectric conversion efficiency and accelerated the separation of the photogenerated electron hole pairs, which because that the structure of heterojunction overcomes the drawbacks of single material, such as narrow light absorption range, wide band gap, short carrier lifetime, etc., improves light utilization, extends the lifetime of photogenerated electron hole pairs, and promotes electron transfer. Herein, hairpin DNA1 (H1) decorated on the b-TiO₂/CdS:Eu/Ti₃C₂ electrode surface by Cd-S bonds, after H2/miRNA-21 heterduplex was introduced, the strand-displacement reaction (SDR) was triggered between H1 and H2/miRNA-21, accordingly, miRNA-21 was discharged from the H2/miRNA-21 heterduplex, forming the H1/H2 duplex, and the reuse of miRNA-21 was realized. As a signal amplification factor, the signal amplification factor H3-CdSe was hybridized with H1/H2 duplex, which greatly enhanced the sensitivity of the PEC biosensor. Under optimal conditions, the designed PEC biosensor displayed outstanding sensitivity, selectivity and stability with a wide liner range from 1.0 μM to 10.0 fM and a low detection limit of 3.3 fM. The preparation of the optoelectronic material affords a new direction for the progress of heterojunction photovoltaic materials and the construction of the proposed biosensor also provides a new thought for the PEC detection of human miRNA-21 with superior performance. Simultaneously, the established biosensor exhibiting tremendous possibility for detecting other biomarkers and biomolecules in clinical diagnosis fields.

Combination Strategies of Different Antimicrobials: An Efficient and Alternative Tool for Pathogen Inactivation

Despite the discovery and development of an array of antimicrobial agents, multidrug resistance poses a major threat to public health and progressively increases mortality. Recently, several studies have focused on developing promising solutions to overcome these problems. This has led to the development of effective alternative methods of controlling antibiotic-resistant pathogens. The use of antimicrobial agents in combination can produce synergistic effects if each drug invades a different target or signaling pathway with a different mechanism of action. Therefore, drug combinations can achieve a higher probability and selectivity of therapeutic responses than single drugs. In this systematic review, we discuss the combined effects of different antimicrobial agents, such as plant extracts, essential oils, and nanomaterials. Furthermore, we review their synergistic interactions and antimicrobial activities with the mechanism of action, toxicity, and future directions of different antimicrobial agents in combination. Upon combination at an optimum synergistic ratio, two or more drugs can have a significantly enhanced therapeutic effect at lower concentrations. Hence, using drug combinations could be a new, simple, and effective alternative to solve the problem of antibiotic resistance and reduce susceptibility.

Activating the Stepwise Intercalation-Conversion Reaction of Layered Copper Sulfide toward Extremely High Capacity Zinc-Metal-Free Anodes for Rocking-Chair Zinc-Ion Batteries

Conventional zinc-ion batteries (ZIBs) are severely hindered by the inherent drawbacks of Zn metal anodes including dendrite growth, side reactions, and interface passivation. Developing intercalation-type anodes to fabricate rocking-chair ZIBs is a promising approach to overcome the above issues. However, the low capacity resulting from the limited transfer electron number of intercalation reactions impedes their practical applications. Herein, we report an effective strategy to break the capacity limit of layered CuS materials as a Zn-metal-free anode through activating its intrinsic conversion reaction. It is found that the preintercalation of cetyltrimethylammonium bromide in CuS (CuS@CTMAB) significantly lowers the energy barrier of the conversion reaction, thus realizing a record-breaking capacity (367.4 mAh g^-1 at 0.1 A g^-1) as a Zn-metal-free anode based on the reversible conversion of Cu²⁺/Cu⁰. Theoretical calculation, ex situ microscopy, and spectroscopy results verify that the characteristic stepwise intercalation-conversion reaction route occurred in CuS@CTMAB. Moreover, the moderate structure transformation and good electronic conduction during the phase evolution process led to excellent cycling stability and high rate performance. Consequently, the rocking-chair ZIB full battery system utilizing CuS@CTMAB and Zn²⁺-preintercalated MnO₂ as the anode and cathode, respectively, exhibits exceptional capacity retention of 93.9% up to 8000 cycles at 2 A g^-1. Besides, the CuS@CTMAB anode is also compatible with high-voltage Prussian blue cathodes, demonstrating its outstanding practicality.

Constructing Zn-P charge transfer bridge over ZnFe2O4-black phosphorus 3D microcavity structure: Efficient photocatalyst design in visible-near-infrared region

Black phosphorus (BP) is one of the most promising visible-near-infrared light-driven photocatalysts with favorite photoelectric properties and unique tunable direct band gap. Nevertheless, the further development of BP is hindered by the fast carrier recombination rate and high Gibbs free energy. Herein, an innovative strategy is developed for the controllable construction of Zn-P bonds induced zinc ferrite/black phosphorus (ZnFe₂O₄-BP) three dimensions (3D) microcavity structure. The Zn-P bonds serve as an efficient channel to optimize the carrier transport and Gibbs free energy of BP simultaneously. Besides, the unique 3D core-shell microcavity structure maintains the multiple reflections of sunlight inside the catalysts, which greatly improves the sunlight utilization upon photocatalysis. An optimized photocatalytic hydrogen production rate of 560 µmol h^-1g^-1 under near-infrared light (>820 nm) is achieved. A possible photocatalytic mechanism is proposed based on a series of experimental characterizations and theoretical calculations, this work provides a new sight to design high-quantity BP-based full-spectrum photocatalysts for solar energy conversion.

A label-free photoelectrochemical immunosensor for carcinoembryonic antigen detection based on a g-C3N4/CdSe nanocomposite

Herein, a label-free photoelectrochemical immunosensor based on a g-C3N4/CdSe nanocomposite was established and applied to detect carcinoembryonic antigen (CEA). The prepared nanocomposite materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), ultraviolet-visible absorption spectroscopy (UV-vis), X-ray photoelectron spectroscopy (XPS), fourier transform infrared spectrometer (FT-IR) and photoluminescence spectroscopy (PL). The results indicate that g-C3N4/CdSe nanocomposite materials were successfully synthesized. In a typical assembly process, the immunosensor was constructed by modifying a fluorine-doped tin oxide (FTO) electrode with poly dimethyl diallyl ammonium chloride (PDDA), the g-C3N4/CdSe nanocomposite, the anti-carcinoembryonic antigen antibody (Ab) and the blocking agent bovine serum albumin (BSA) successively. In the presence of CEA, the photocurrent signal of the prepared immunosensor decreased significantly. Accordingly, under the optimal conditions, a label-free photoelectrochemical immunosensor was established, and it exhibited excellent selectivity and repeatability for CEA detection. The detection limit was 0.21 ng mL-1, and the range was 10 ng mL-1-100 μg mL-1. Simultaneously, the immunosensor also provides a likely sensing device for detecting other protein targets, which is of great significance for early clinical diagnosis.

Anchoring Black Phosphorus Nanoparticles onto ZnS Porous Nanosheets: Efficient Photocatalyst Design and Charge Carrier Dynamics

Black phosphorus nanoparticles (BP NPs) possess great advantages in photocatalysis owing to the rich surface active sites, extremely high carrier mobility, and strong visible-near-infrared light response. However, the complex preparation process, poor stability, and rapid carrier recombination restrict their successful application in photocatalysis. Herein, the above problems are resolved by preparing BP NPs through a facile sonication-assisted hydrothermal method. To further improve the stability and photocatalytic activity, BP NPs are tightly anchored onto ZnS to prepare ZnS-BP porous nanosheets. With the Zn-P coordination bond built between them, higher stability, enhanced carrier transport ability, and excellent hydrogen adsorption and desorption equilibrium of photocatalysts are achieved. An efficient and recyclable photocatalytic hydrogen evolution rate of 1561 μmol h^-1 g^-1 is obtained under visible-light irradiation, which is superior to that of previously reported BP-based photocatalysts. Besides, the photocatalytic mechanism is investigated based on the theoretical calculations and experimental characterizations. The charge transfer dynamics are studied by surface photovoltage (SPV), ultrafast transient absorption (TA), X-ray absorption spectra (XAS), electrochemical impedance spectroscopy (EIS), and steady-state photoluminescence (PL) spectra. This work set a reference for the design of high-performance BP-related nanomaterials in solar energy storage and conversion.