Highly selective rapid colorimetric sensing of Pb2+ ion in water samples and paint based on metal induced aggregation of N-decanoyltromethamine capped gold nanoparticles

Smartphone-integrated colorimetric and microfluidic paper-based analytical devices for the trace-level detection of permethrin

Permethrin is a pyrethroid pesticide and insect repellent that prevents mosquito-borne infections like dengue and malaria in tropical areas. This work describes a new colorimetric sensor based on metronidazole-stabilized silver nanoparticles (MTZ-AgNPs) for the first rapid, sensitive, and selective permethrin detection. The MTZ-AgNPs-based colorimetric sensor has a limit of detection (LOD) of 0.0104 µM and a limit of quantification (LOQ) of 0.0348 µM, respectively. The sensor is further integrated with smartphone and microfluidic fabrication of paper-based analytical devices (µPADs) for real-time and on-site detection of permethrin. Under optimal settings, no potential environmental contaminants interfere with permethrin detection, confirming its high selectivity. Finally, the practical applicability of sensors is confirmed in real tomato and apple extract samples. The US environmental protection agency's recommended UPLC method validated the detection efficiency of the proposed colorimetric sensor. The % recoveries from UPLC and MTZ-AgNPs suggest that the present sensor can quantitatively analyze permethrin in real samples.

Gold Nanoparticle-Based Colorimetric Sensors: Properties and Application in Detection of Heavy Metals and Biological Molecules

During the last decade, advances have been made in nanotechnology using nanomaterials, leading to improvements in their performance. Gold nanoparticles (AuNPs) have been widely used in the field of sensor analysis and are also combined with certain materials to obtain the desired characteristics. AuNPs are commonly used as colorimetric sensors in detection methods. In developing an ideal sensor, there are certain characteristics that must be met such as selectivity, sensitivity, accuracy, precision, and linearity, among others. Various methods for the synthesis of AuNPs and conjugation with other components have been carried out in order to obtain good characteristics for their application. AuNPs can be applied in the detection of both heavy metals and biological molecules. This review aimed at observing the role of AuNPs in its application. The synthesis of AuNPs for sensors will also be revealed, along with their characteristics suitable for this role. In the application method, the size and shape of the particles must be considered. AuNPs used in heavy metal detection have a particle size of around 15-50 nm; in the detection of biological molecules, the particle size of AuNPs used is 6-35 nm whereas in pharmaceutical compounds for cancer treatment and the detection of other drugs, the particle size used is 12-30 nm. The particle sizes did not correlate with the type of molecules regardless of whether it was a heavy metal, biological molecule, or pharmaceutical compound but depended on the properties of the molecule itself. In general, the best morphology for application in the detection process is a spherical shape to obtain good sensitivity and selectivity based on previous studies. Functionalization of AuNPs with conjugates/receptors can be carried out to increase the stability, sensitivity, selectivity, solubility, and plays a role in detecting biological compounds through conjugating AuNPs with biological molecules.

A critical review on the bio-mediated green synthesis and multiple applications of magnesium oxide nanoparticles

Nowadays, advancements in nanotechnology have efficiently solved many global problems, such as environmental pollution, climate change, and infectious diseases. Nano-scaled materials have played a central role in this evolution. Chemical synthesis of nanomaterials, however, required hazardous chemicals, unsafe, eco-unfriendly, and cost-ineffective, calling for green synthesis methods. Here, we review the green synthesis of MgO nanoparticles and their applications in biochemical, environmental remediation, catalysis, and energy production. Green MgO nanoparticles can be safely produced using biomolecules extracted from plants, fungus, bacteria, algae, and lichens. They exhibited fascinating and unique properties in morphology, surface area, particle size, and stabilization. Green MgO nanoparticles served as excellent antimicrobial agents, adsorbents, colorimetric sensors, and had enormous potential in biomedical therapies against cancers, oxidants, diseases, and the sensing detection of dopamine. In addition, green MgO nanoparticles are of great interests in plant pathogens, phytoremediation, plant cell and organ culture, and seed germination in the agricultural sector. This review also highlighted recent advances in using green MgO nanoparticles as nanocatalysts, nano-fertilizers, and nano-pesticides. Thanks to many emerging applications, green MgO nanoparticles can become a promising platform for future studies.

Fully inkjet-printed paper-based Pb2+ optodes for water analysis without interference from the chloramine disinfectant

We developed a paper-based colorimetric sensor for facile and cost-effective detection of Pb²⁺ in drinking and environmental water samples. The Pb²⁺ ion-selective optodes are fabricated by inkjet printing of ionophore, chromoionophore, and ion exchanger on cellulose paper. Pb²⁺ in water samples induces deprotonation of the pH chromoionophore and changes the optode color, which is acquired and analyzed by a smartphone. The paper-based optode without any plasticizer or polymer has a dynamic range and selectivity comparable to those of traditional optodes using PVC polymer and/or plasticizer. Furthermore, the response time of the plasticizer/polymer-free paper-based optode is much shorter than those of plasticized PVC-based optodes on paper and glass (5 min vs. 15 and 50 min). Moreover, the plasticizer/polymer-free optode preserves the water-wicking capability of porous cellulose paper, allowing for the design of pump-free microfluidic devices. Chloramine, a widely used disinfectant in drinking water, was found to be a strong and generic interference species for heavy metal ion detection via ion-selective optodes. A fully inkjet-printed lateral-flow paper-based device consisting of a sodium thiosulfate-based chloramine elimination zone and a plasticizer/polymer-free sensing zone was designed for Pb²⁺ detection in tap water disinfected by chloramine. The dynamic range of the Pb²⁺ sensor may be shifted from the current 10^-6 to 10^-5 M to lower concentrations by using stronger ionophores, but this work lays a foundation for the design of paper-based heavy metal ion sensors without detrimental interference from disinfectants.

Ultrasensitive Detection of Cu(II) and Pb(II) Using a Water-Soluble Perylene Probe

The selective detection of metal ions in water, using sustainable detection systems, is of crescent importance for monitoring water environments and drinking water safety. One of the key elements of future chemical sciences is the use of sustainable approaches in the design of new materials. In this study, we design and synthesize a low-cost, water-soluble potassium salt of 3,4,9,10-perylene tetracarboxylic acid (PTAS), which shows a selective optical response on the addition of Cu²⁺ and Pb²⁺ ions in aqueous solutions. By using a water-soluble chromophore, the interactions with the metal ions are definitely more intimate and efficient, with respect to standard methods employing cosolvents. The detection limits of PTAS for both Cu²⁺ and Pb²⁺ are found to be 2 µM by using a simple absorbance mode, and even lower (1 μM) with NMR experiments, indicating that this analyte–probe system is sensitive enough for the detection of copper ions in drinking water and lead ions in waste water. The complexation of PTAS with both ions is supported with NMR studies, which reveal the formation of new species between PTAS and analytes. By combining a low-cost water-soluble chromophore with efficient analyte–probe interactions due to the use of aqueous solutions, the results here obtained provide a basis for designing sustainable sensing systems.

An Efficient Voltammetric Sensor Based on Graphene Oxide-Decorated Binary Transition Metal Oxides Bi2O3/MnO2 for Trace Determination of Lead Ions

Herein we present a facile synthesis of the graphene oxide-decorated binary transition metal oxides of Bi₂O₃ and MnO₂ nanocomposites (Bi₂O₃/MnO₂/GO) and their applications in the voltammetric detection of lead ions (Pb²⁺) in water samples. The surface morphologies, crystal structures, electroactive surface area, and charge transferred resistance of the Bi₂O₃/MnO₂/GO nanocomposites were investigated through the scanning electron microscopy (SEM), power X-ray diffraction (XRD), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) techniques, respectively. The Bi₂O₃/MnO₂/GO nanocomposites were further decorated onto the surface of a glassy carbon electrode (GCE), and Pb²⁺ was quantitatively analyzed by using square-wave anodic stripping voltammetry (SWASV). We explored the effect of the analytical parameters, including deposition potential, deposition time, and solution pH, on the stripping peak current of Pb²⁺. The Bi₂O₃/MnO₂/GO nanocomposites enlarged the electroactive surface area and reduced the charge transferred resistance by significant amounts. Moreover, the synergistic enhancement effect of MnO₂, Bi₂O₃ and GO endowed Bi₂O₃/MnO₂/GO/GCE with extraordinary electrocatalytic activity toward Pb²⁺ stripping. Under optimal conditions, the Bi₂O₃/MnO₂/GO/GCE showed a broad linear detection range (0.01-10 μM) toward Pb²⁺ detection, with a low limit of detection (LOD, 2.0 nM). The proposed Bi₂O₃/MnO₂/GO/GCE electrode achieved an accurate detection of Pb²⁺ in water with good recoveries (95.5-105%).

Colorimetric assay based on peroxidase-like activity of dodecyl trimethylammonium bromide-tetramethyl zinc (4-pyridinyl) porphyrin for detection of organophosphorus pesticides

A simple and sensitive colorimetric assay for detecting organophosphorus pesticides (OPs) was developed based on 3,3',5,5'-tetramethylbenzidine (TMB)/hydrogen peroxide (H₂O₂)/dodecyl trimethylammonium bromide (DTAB)-tetramethyl zinc (4-pyridinyl) porphyrin (ZnTPyP). In this system, based on the peroxidase-like activity of DTAB-ZnTPyP, H₂O₂ decomposes to produce hydroxyl radicals, which oxidize TMB, resulting in blue oxidation products. The OPs (trichlorfon, dichlorvos, and thimet) were first combined with DTAB-ZnTPyP through electrostatic interactions. The OPs caused a decrease in the peroxidase-like activity of DTAB-ZnTPyP due to spatial site blocking. At the same time, π-interactions occurred between them, and these interactions also inhibited the oxidation of TMB (652 nm), thus making the detection of OPs possible. The limits of detection for trichlorfon, dichlorvos, and thimet were 0.25, 1.02, and 0.66 μg/L, respectively, and the corresponding linear ranges were 1-35, 5-45, and 1-40 μg/L, respectively. Moreover, the assay was successfully used to determine OPs in cabbage, apple, soil, and traditional Chinese medicine samples (the recovery ratios were 91.8-109.8%), showing a great promising potential for detecting OPs also in other complex samples.

A controllable staining colorimetric method based on carboxylated cellulose membranes for early-warning and semi-quantitative detection of aflatoxins in water

A controllable staining colorimetric method was proposed for antibody-free detection of AFs by exploiting controllable electrostatic-staining of CCMs with Hg2+-capped AuNPs.

Tannic Acid-Capped Gold Nanoparticles as a Novel Nanozyme for Colorimetric Determination of Pb2+ Ions

In this study, tannic acid-modified gold nanoparticles were found to have superior nanozyme activity and catalyze the oxidation reaction of 3,3′,5,5′-tetramethylbenzidine in the presence of hydrogen peroxide. Enhancing the catalytic activity of the nanozyme by Pb2+ ions caused by selectively binding metal ions by the tannic acid-capped surface of gold nanoparticles makes them an ideal colorimetric probe for Pb2+. The parameters of the reaction, including pH, incubation time, and concentration of components, were optimized to reach maximal sensitivity of Pb2+ detection. The absorption change is directly proportional to the Pb2+ concentration and allows the determination of Pb2+ ions within 10 min. The colorimetric sensor is characterized by a wide linear range from 25 to 500 ng×mL−1 with a low limit of detection of 11.3 ng×mL−1. The highly sensitive and selective Pb2+ detection in tap, drinking, and spring water revealed the feasibility and applicability of the developed colorimetric sensor.

Use of nitrogen-doped amorphous carbon nanodots (N-CNDs) as a fluorometric paper-based sensor: a new approach for sensitive determination of lead(ii) at a trace level in highly ionic matrices

This work reports a facile synthesis of nitrogen-doped amorphous carbon nanodots (N-CNDs) and their use as a fluorometric paper-based sensor for the determination of Pb²⁺ at a low concentration. Both solution-based and paper-based systems were developed. The results show that the linearity ranges for Pb²⁺ determination were 0.010-10 mg L^-1 (LOD = 0.008 mg L^-1) and 0.005-0.075 mg L^-1 (LOD = 0.004 mg L^-1) for the solution-based and the paper-based sensors, respectively. Furthermore, the developed sensors show relatively high selectivity toward Pb²⁺ over ten other metal cations of different charges including As³⁺, Hg²⁺, Cd²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Fe³⁺, Cu²⁺, Ba²⁺, and Ag⁺. The mechanism of Pb²⁺ determination was also investigated. It was found that the sensors exploited the quenching of the fluorescence intensity of N-CNDs by Pb²⁺via the photo-induced electron transfer (PET) mechanism. When applied to real water and herbal medicine samples, the performance of the sensor exhibited no significant difference as compared to the results of the validation method (ICP-OES). Overall, the developed sensors, especially the paper-based one, are promising for the practical analysis of Pb²⁺ in pharmaceutical and environmental samples with a low Pb²⁺ concentration.

A simple and cost-effective paper-based and colorimetric dual-mode detection of arsenic(iii) and lead(ii) based on glucose-functionalized gold nanoparticles

We report a simple and cost-effective paper-based and colorimetric dual-mode detection of As(iii) and Pb(ii) based on glucose-functionalized gold nanoparticles under optimized conditions. The paper-based detection of As(iii) and Pb(ii) is based on the change in the signal intensity of AuNPs/Glu fabricated on a paper substrate after the deposition of the analyte using a smartphone, followed by processing with the ImageJ software. The colorimetric method is based on the change in the color and the red shift of the localized surface plasmon resonance (LSPR) absorption band of AuNPs/Glu in the region of 200–800 nm. The red shift (Δλ) of the LSPR band observed was from 525 nm to 660 nm for As(iii) and from 525 nm to 670 nm for Pb(ii). The mechanism of dual-mode detection is due to the non-covalent interactions of As(iii) and Pb(ii) ions with glucose molecule present on the surface AuNPs, resulting in the aggregation of novel metal nanoparticles. The calibration curve gave a good linearity range of 20–500 μg L⁻¹ and 20–1000 μg L⁻¹ for the determination of As(iii) and Pb(ii) with the limit of detection of 5.6 μg L⁻¹ and 7.7 μg L⁻¹ for both metal ions, respectively. The possible effects of different metal ions and anions were also investigated but did not cause any significant interference. The employment of AuNPs/Glu is successfully demonstrated for the determination of As(iii) and Pb(ii) using paper-based and colorimetric sensors in environmental water samples.

We report a simple and cost-effective paper-based and colorimetric dual-mode detection of As(iii) and Pb(ii) based on glucose-functionalized gold nanoparticles under optimized conditions.

Portable Real-Time Detection of Pb(II) Using a CMOS MEMS-Based Nanomechanical Sensing Array Modified with PEDOT:PSS

Detecting the concentration of Pb²⁺ ions is important for monitoring the quality of water due to it can become a health threat as being in certain level. In this study, we report a nanomechanical Pb²⁺ sensor by employing the complementary metal-oxide-semiconductor microelectromechanical system (CMOS MEMS)-based piezoresistive microcantilevers coated with PEDOT:PSS sensing layers. Upon reaction with Pb²⁺, the PEDOT:PSS layer was oxidized which induced the surface stress change resulted in a subsequent bending of the microcantilever with the signal response of relative resistance change. This sensing platform has the advantages of being mass-produced, miniaturized, and portable. The sensor exhibited its sensitivity to Pb²⁺ concentrations in a linear range of 0.01–1000 ppm, and the limit of detection was 5 ppb. Moreover, the sensor showed the specificity to Pb²⁺, required a small sample volume and was easy to operate. Therefore, the proposed analytical method described here may be a sensitive, cost-effective and portable sensing tool for on-site water quality measurement and pollution detection.