Highly selective and sensitive chemosensor for Al(III) based on isoquinoline Schiff base

Luminous Insights: Exploring Organic Fluorescent "Turn-On" Chemosensors for Metal-Ion (Cu+2, Al+3, Zn+2, Fe+3) Detection

There are several metal ions that are vital for the growth of the environmental field as well as for the biological field but only up to the maximum limit. If they are present in excess, it could be hazardous for the human health. With the growing technology, a series of various detection techniques are employed in order to recognize those metal ions, some of them include voltammetry, electrochemical methods, inductively couples, etc. However, these techniques are expensive, time consuming, requires large storage, advanced instrumentation, and a skilled person to operate. So, here comes the need of a sensor and it is defined as a miniature device which detects the substance of interest by giving response in the form of energy change. So, from past few decades, many sensors have been formulated for detecting metal ions with some basic characteristics like selectivity, specificity, sensitivity, high accuracy, lower detection limit, and response time. Detecting various metal ions by employing chemosensors involves different techniques such as fluorescence, phosphorescence, chemiluminescence, electrochemical, and colorimetry. The fluorescence technique has certain advantages over the other techniques. This review mainly focuses on the chemosensors that show a signal in the form of fluorescence to detect Al+3, Zn+2, Cu+2, and Fe+3 ions.

Less interference fluorescence analytical strategy: Bridging substance-triggered ratiometric sensor with convenient preparation and application

High interference and narrow application range are key of bottleneck of recent fluorescence analysis methods, which limit their wide application in the sensing field. Therefore, to overcome these disadvantages, a ratiometric fluorescence sensing system utilizing berberine (BER) and silver nanoclusters protected by dihydrolipoic acid (DHLA-AgNCs) was constructed for the first time in this work, to achieve determination of BER and daunorubicin (Dau). BER aqueous solution (non-planar conformation) has no fluorescence emission. When it was mixed with DHLA-AgNCs, the conformation of BER became planar, producing fluorescence emission at 515 nm besides the fluorescence emission peak of DHLA-AgNCs at 653 nm. With the increase of BER concentration added in system, the fluorescence intensity of BER (planar conformation) at 515 nm increased obviously and the fluorescence intensity of DHLA-AgNCs decreased slightly. Therefore, the dual emission fluorescence sensing system was constructed based on a fluorescence substance and non fluorescence substance, to achieve determination of BER. Meanwhile, based on the bridging effect of BER and fluorescence resonance energy transfer effect from Dau, the altering of two peaks intensity was utilized to achieve determination of Dau. Thus, this dual emission sensing system can not only be used for fluorescence analysis of BER and its analogues, but also based on the bridging effect of BER, allowing the determination of Dau and its analogues that could not be directly measured with silver nanoclusters, expanding the application range of traditional dual emission detection systems. Meanwhile, this system has strong anti-interference ability and low toxicity to the human body and less pollution to the sample and environment. This provides a new direction and universal research strategy for the construction of new fluorescence sensing systems in the future for the analysis of target substances that cannot be directly detected with conventional fluorescence analysis methods.

Turn-on detection of Al3+ ions using quinoline-based tripodal probe: mechanistic investigation and live cell imaging applications

In this study, an easily synthesizable Schiff base probe TQSB having a quinoline fluorophore is demonstrated as a fluorescent and colorimetric turn-on sensor for Al3+ ions in a semi-aqueous medium (CH3CN/water; 4 : 1; v/v). Absorption, emission and colorimetric studies clearly indicated that TQSB exhibited a high selectivity toward Al3+, as observed from its excellent binding constant (Kb = 3.8 × 106 M-1) and detection limit (7.0 nM) values. TQSB alone was almost non-fluorescent in nature; however, addition of Al3+ induced intense fluorescence at 414 nm most probably due to combined CHEF (chelation-enhanced fluorescence) and restricted PET effects. The sensing mechanism was established via Job's plot, NMR spectroscopy, ESI-mass spectrometry, and density functional theory (DFT) analyses. Furthermore, to evaluate the applied potential of probe TQSB, its sensing ability was studied in real samples such as soil samples and Al3+-containing Digene gastric tablets as well as on low-cost filter paper strips. Fluorescence microscopy imaging experiments further revealed that TQSB can be used as an effective probe to detect intracellular Al3+ in live cells with no cytotoxicity.

A simple 'turn-on' fluorescence chemosensor for Al(iii) detection in aqueous solution and solid matrix

A simple fluorescence chemosensor of FHS-OH based on salicylaldehyde Schiff base was developed via a one-step reaction, which achieved a fast and highly selective response for Al(iii). Mechanism studies showed that when FHS-OH was exposed to Al(iii) with 1 : 2 binding stoichiometry in an aqueous solution at neutral pH, C[double bond, length as m-dash]N isomerization and PET processes were limited, resulting in a 'turn-on' fluorescence response with a low detection limit of 63 nmol L-1 and a satisfying linear range of 0.0-20.0 μmol L-1. Compared to traditional detection methods for Al(iii), fluorometry using FHS-OH has several advantages, including simplicity, quick response, and capability of real-time detection. More importantly, the detection of Al(iii) on a solid matrix (test paper) was successfully achieved. After the addition of Al(iii), a significant emission colour change from green to bright blue was observed by the naked eye owing to the intrinsic aggregation-induced emission (AIE) characteristic of FHS-OH.

Recent Developments in Colorimetric and Fluorometric Detection Methods of Trivalent Metal Cations (Al3+, Fe3+ and Cr3+) Using Schiff Base Probes: At a Glance

This review basically concerned with the application of different Schiff bases (SB) based fluorimetric (turn-off and turn-on) and colorimetric chemosensors for the detection of heavy metal cations particularly Al(III), Fe(III), and Cr(III) ions. Chemosensors based on Schiff bases have exhibited outstanding performance in the detection of different metal cations due to their facile and in-expensive synthesis, and their excellent coordination ability with almost all metal cations and stabilize them in different oxidation states. Moreover, Schiff bases have also been used as antifungal, anticancer, analgesic, anti-inflammatory, antibacterial, antiviral, antioxidant, and antimalarial etc. The Schiff base also can be used as an intermediate for the formation of various heterocyclic compounds. In this review, we have focused on the research work performed on the development of chemosensors (colorimetric and fluorometric) for rapid detection of trivalent metal cations particularly Al(III), Fe(III), and Cr(III) ions using Schiff base as a ligand during 2020-2022.

A pyridine modified naphthol hydrazone Schiff base chemosensor for Al3+ via intramolecular charge transfer process

A pyridine modified naphthol hydrazone Schiff base chemosensor, NaPy, was prepared in a two-step process to detect aluminum ion (Al3+) in different samples. The probe shows a turn-off emission response towards Al3+ at a 1:1 binding stoichiometry via intramolecular charge transfer (ICT) mechanism, as validated by density functional theory (DFT) calculations and a series of spectroscopic measurements. The response time is slightly over one minute with a limit of detection (LOD) value of 0.164 µM, demonstrating the great sensitivity of the probe. It is also found that NaPy exhibits high selectivity towards Al3+ and resists interference from seventeen other cations. Application investigations in paper strips, water samples and HeLa cells suggest that NaPy can be used as an efficient probe for sensing Al3+ in real environmental samples and biosystems.

Regulating the photophysical properties of ESIPT-based fluorescent probes by functional group substitution: a DFT/TDDFT study

CONTEXT

In recent years, fluorescent probe technology has received more and more attention. However, the photophysical and photochemical properties of probe molecules still need to be further explored. This paper presents the excited state intramolecular proton transfer (ESIPT) processes and photophysical properties of the probe molecule 4-bromo-2-((E)-((Z)-((5-bromo-1H-indol-2-yl) methylene) hydrazono) methyl) phenol (BHPL) and its four derivatives (BHPL2, BHPL3, BHPL4, and BHPL5). Infrared spectra and geometric structure analyses revealed that introducing the -NH₂ group on the benzene ring with the hydroxyl group will enhance the intramolecular hydrogen bond, which benefits the ESIPT process. Combining their absorption and fluorescence spectra, it can be concluded that BHPL2 and BHPL4 are both excellent probe candidates due to their large Stokes shift. The hole and electron and root mean square displacement analyses manifest that the fluorescence quenching of BHPL4 may be due to the intramolecular charge transfer process. Potential energy curves of BHPL and its four derivatives noted that ESIPT process of the BHPL2 is the most favorable to occur. The frontier molecular orbital and NBO analyses indicated that besides introducing electron-donating groups to reduce the energy gap and enhance fluorescence emission, introducing double electron-withdrawing groups can also achieve this effect, explaining why the energy barrier of ESIPT process for BHPL2 is lower than BHPL5. This work would provide the theoretical basis for designing novel fluorescence probes with more prominent properties.

METHODS

The ground (S₀) and excited (S₁) state structures of all compounds were optimized by density functional theory (DFT) and time-dependent (TDDFT) method, with B3LYP/6-311+G(d,p) level, respectively. The infrared spectra and potential energy curves were simulated at the same theoretical level. The reduced density gradient scatter plots and interaction region indicator isosurfaces were drawn using Multiwfn and VMD programs. The absorption and fluorescence spectra were simulated by the TDDFT/B3PW91/6-311+G(d,p) method. All the calculations in this work are carried out in Gaussian 16 program package.

Schiff Base Compounds as Fluorescent Probes for the Highly Sensitive and Selective Detection of Al3+ Ions

Two new Schiff base fluorescent probes (L and S) were designed for selectively detecting Al3+ ions in aqueous medium. Structural characterization of the purely synthesized compounds was acquired by IR, 1H NMR and 13C NMR. Moreover, their photochromic and fluorescent behaviors have been investigated systematically by UV–Vis absorption and fluorescence spectra. The two probes have both high selectivity and sensitivity toward Al3+ ions in aqueous medium. The 2:1 stoichiometry between the Al3+ and probes was verified by Job’s plot. Moreover, the limits of detection (LOD) for Al3+ by L and S were 1.98 × 10−8 and 4.79 × 10−8 mol/L, respectively, which was much lower than most previously reported probes. The possible recognition mechanism was that the metal ions would complex with Schiff base probes because of the prevalence of the species optimal for complex formation, inhibiting the structural isomerization of conjugated double bonds (-C=N-), inhibiting the proton transfer process in the excited state of the molecules and resulting in changes of its color and fluorescence behavior. Furthermore, the probes will have potential applications for selectively, detecting Al3+ ions in the environmental system with high accuracy and providing a new strategy for the design and synthesis of multi-functional sensors.

A New Azo-Schiff Base Dual-mode Chemosensor: Colorimetric Detection of Cobalt Ions and Fluorometric Detection of Aluminum Ions in Aqueous Ethanol Solution

A new Azo-Schiff base ligand (H₂L) was designed and synthesized as a cation chemosensor. The chemosensor H₂L as dual chemosensor showed selective fluorescence recognition of Al³⁺ with a noticeable fluorescence enhancement and colorimetric detection of Co2 + in aqueous ethanol solution. The H₂L exhibits a linear response toward Al³⁺ ions in the concentration range of 1.91 × 10^-8 M to 4.8 × 10^-6 M with a limit of detection of 1.91 × 10^-8 M. The sensing mechanism of sensor H₂L toward Al³⁺ was investigated by 1H NMR and IR spectroscopies. Fluorescence switch based on the control of EDTA and Al³⁺ proved H₂L could act as a reversible chemosensor. The molecular structure of [NiL] complex has been determined by X-ray crystallography.

A simple hydrazone probe for recognition of Al3+ and PPi and its applicability in lysosomal imaging

A simple hydrazone probe (1) was designed and synthesized for the successive detection of Al³⁺ and pyrophosphate (PPi) in almost 100% buffer environment. The probe provided O₂N donor set for chelation with Al³⁺, leading to a distinct fluorescence boost at 510 nm. The in-situ formed 1-Al³⁺ complex detected PPi with an "on-off" behavior. The detection limits for Al³⁺ and PPi were 35.7 nM and 76 nM, respectively. Benefiting from the existence of morpholine as lysosome-targeting group, probe 1 was successfully applied to the detection of Al³⁺ and PPi in lysosomes.

A new highly selective "off-on" typical chemosensor of Al3+, 1-((Z)-((E)-(3,5-dichloro-2-hydroxybenzylidene)hydrazono)methyl) naphthalene-2-ol, an experimental and in silico study

A new promising fluorescent chemosensor based on a 2-hydroxynaphthaldehyde skeleton was successfully synthesized through double imine formation as a yellow solid with an overall chemical yield of 63%. The compound showed UV/Visible maxima of at 394 nm in DMSO. Based on spectroscopic data of FTIR, ToF-HRMS, 1H-NMR, and 13C-NMR, the product was characterized as 1-((Z)-((E)-(3,5-dichloro-2-hydroxybenzilydine)hydrazono)methyl)naphthalene-2-ol. Upon experimental study, the compound was confirmed as a highly selective and reversible off-on typical chemosensor against Al3+ with an emission quantum yield of 0.203 ± 0.009. The Job's plot analysis revealed that a highly stable 1:1 complex was formed with an association constant of 8.73 × 105 M-1. A pH-dependent study showed that the sensor was potentially applicable at physiological conditions (pH 7-8) in a mixture of DMSO : H2O (99 : 1, v/v). The LoD and LoQ of the chemosensor towards Al3+ in DMSO were found to be 0.04 and 0.14 μM respectively. Based on DFT and TD-DFT calculation (B3LYP hybrid method/basis set of 6-311+G(d,p)), the sensing mechanism of the chemosensor to the ion was discovered as inhibition of excited-state intramolecular proton transfer (ESIPT).

Naphthalimide appended isoquinoline fluorescent probe for specific detection of Al3+ ions and its application in living cell imaging

Herein, a novel Schiff base fluorescent probe NIQ based on naphthalimide and iso-quinoline units has been readily prepared for the selective detection of Al³⁺ ions. The obviously visible color changes and prominent fluorescence enhancement were observed upon the addition of Al³⁺ to NIQ, which could be attributed to the complexation of NIQ with Al³⁺ and thus leading to the inhibition of photo-induced electron transfer (PET) and the chelation-enhanced fluorescence (CHEF) progress. The limit of detection (LOD) was 52 nM that was far below the standard recommended by the WHO. Binding ratio (1:1) of NIQ with Al³⁺ ions was supported by Job's plot. The binding constant of NIQ for Al³⁺ were calculated to be 3.27 × 10⁵ M^-1 on the basis of benesi-Hildebrand plot. The plausible binding mechanism for NIQ towards Al³⁺ ions was evidenced by the density functional theory (DFT) and ¹H NMR titration experiment. Furthermore, this "turn-on" probe NIQ has been successfully applied as a biomarker for imaging the Al³⁺ ions in living cells.

A novel reversible fluorescent probe based on naphthalimide for sequential detection of aluminum (Al3+) and fluoride (F-) ions and its applications

A new Schiff base fluorescent probe NBP derived from the one-step condensation strategy of 2-butyl-6-hydroxy-1,3-dioxo-2,3-dihydro-1H-benzo[de]isoquinoline-5-carbaldehyde and N-(2-(hydrazinecarbonyl)phenyl)benzamide was synthesized and characterized. NBP exhibited high selectivity toward Al³⁺ along with naked-eye color changes and prominent fluorescence enhancement. The limit of detection (LOD) of NBP toward Al³⁺ was detected to be 80 nM. The binding ratio of NBP with Al³⁺ ions was obtained as 1 : 2 on the basis of Job's plot with the association constant K_a value of 4.22 × 10¹⁰ M^-1/2. The plausible complexation mechanism of NBP toward Al³⁺ ions was validated by the density functional theory (DFT) and IR spectrum. In addition, in situ formed "NBP + Al³⁺" could be utilized as the second sensor for selective recognition of F^-via fluorescence quenching with a low detection limit (44 nM). Furthermore, the cell imaging experiments of probe NBP in HeLa cells have successfully demonstrated that NBP could serve as an indicator for monitoring Al³⁺ ions in living cells. On top of that, NBP could be used to prepare simple test paper strips for quickly and qualitatively detecting a trace amount of Al³⁺ ions in a visible manner.

Recent advances in the development of fluorescent chemosensors for Al3

Detection of Al3+ has become important as it is related to several health issues and other problems. Different fluorophoric platforms, such as naphthalene, benzene, rhodamine, etc., have been explored to sense Al3+ and a good number of research articles are being published. This article focuses on the synthesis of recently reported aluminum sensors constructed from 2-hydroxy-1-naphthaldehyde, salicylaldehyde, rhodamine, coumarin and different metal based-MOFs.

Synthesis, Crystal Structures, Fluorescence and Quantum Chemical Investigations of some Multi-Substituted Quinoline Derivatives

Starting from eugenol (4-allyl-2-methoxyphenol) three new quinoline derivatives, namely 5-bromo-7-(carboxymethoxy)-6-hydroxy-1-methylquinolin-1-ium-3-sulfonate (Q2, C₁₂H₁₀BrNO₇S), 5-amino-7-(carboxymethoxy)-6-hydroxyquinolin-1-ium-3-sulfonate (Q4, C₁₁H₁₀N₂O₇S) and 7-(carboxymethoxy)-5,6-dihydroxylquinolin-1-ium-3-sulfonate (Q6, C₁₁H₉NO₈), have been synthesized and crystallised as dihydrate. The best planes through the quinoline ring and the carboxymethoxy substituent is 6.60 (14), 7.28 (6) and 4.73 (7)° for Q2, Q4 and Q6, respectively. The crystal packing of Q2 is characterised by O-H…O, π …π and Br …pyridine interactions. The two water molecules bridge three sulphate groups. Infinite chains of Q4 running in the direction [021] are formed by O/N-H …O hydrogen bonds at both ends of the molecule. Parallel chains interact by O/N-H…O hydrogen bonds and π…π and C=O…phenyl stacking. The -NH₂ substituent bridges two sulphate groups, while the two water molecules bridge the other functional groups. The packing of Q6 consists of sheets of molecules interaction through O/N-H…O hydrogen bonds while the two water molecules bridge all function groups present. Parallel sheets interact through π…π and C=O…pyridine stacking. An aqueous solution of Q2 and its precursor 7-(carboxymethoxy)-6-hydroxyquinolin-1-ium-3-sulfonate (Q) exhibits fluorescence which is pH dependent. The fluorescence intensity of a 10 μM solution of Q containing Zn²⁺ reaches its maximum for a [Zn²⁺]:[Q] ratio of 1:1. The fluorescence properties of Q, Q2, Q4 and Q6 were further investigated by DFT calculation methods.