Reaction-based highly selective and sensitive monomer/polymer probes with Schiff base groups for the detection of Hg2+ and Fe3+ ions

Porous organic polymers-based fluorescent chemosensors for Fe(III) ions-a functional mimic of siderophores

Extended organic polymers such as amorphous Covalent Organic Polymers (COPs) and crystalline Covalent Organic Frameworks (COFs) are emerging functional polymeric materials that have recently been shown promises as luminescent materials for chemosensing applications. A wide variety of luminescence COPs and COFs have been synthesized and successfully used as fluorescence-sensing materials for hazardous environmental pollutants and toxic contaminants. This review exemplifies various COPs and COFs-based fluorescence sensors for selective sensing of Fe(III) ions. The fluorescence sensors are sorted according to their structural features and each section provides a detailed discussion on the synthesis and fluorescence sensing ability of different COPs and COFs towards Fe(III) ions. Also, this review highlights the limitations of the existing organic polymer-based chemosensors and future perspectives on translating COPs and COFs-based fluorescence sensors for the practical detection of Fe(III) ions.

Synthesis of organic-solvent-soluble cellulose and preparation of fluorescent polyurethanes for the detection and removal of Hg+ ions

Modifying cellulose to obtain materials with favorable processing properties and functions is highly significant, especially, for the detection and removal of heavy metal ions. In this study, fluorescent cellulose-based polyurethane (PU) films containing naphthalimide fluorophore were synthesized and could use for the convenient detection and removal of Hg+ ions. Firstly, the microcrystalline cellulose was treated with SOCl2 to convert some -OH groups into -Cl. Simultaneously, a naphthalimide derivative (NAN) with -NH- groups was synthesized. Subsequently, a fluorescent cellulose-based probe (Cel-NAN) was prepared by utilizing the substitution reaction between -Cl on cellulose and -NH- on NAN. Finally, two cellulose-based fluorescent PU films (Cel-NAN-PU1 and Cel-NAN-PU2) were successfully synthesized by reacting the unreacted -OH groups on Cel-NAN with PEG-1000 and HDI/IPDI. These as-prepared PU films could serve as portable fluorescence test papers to Hg+ ions in aqueous solutions. Upon contact with Hg+ ions, the fluorescence was quenched, acting as a "turn-off" probe. Simultaneously, these films could serve as adsorbents for the removal of Hg+ ions from aqueous systems. Cel-NAN-PU1 film exhibited a removal efficiency over 80 % and an adsorption capacity of 8.4 mg·cm-2 for Hg+. These cellulose-based fluorescent PU films possess promising potential in the field of mercury pollution control.

Oxadiazole Schiff Base as Fe3+ Ion Chemosensor: "Turn-off" Fluorescent, Biological and Computational Studies

Compound, (E)-5-(4-((thiophen-2-ylmethylene)amino)phenyl)-1,3,4-oxadiazole-2-thiol (3) was synthesized via condensation reaction of 5-(4-aminophenyl)-1,3,4-oxadiazole-2-thiol with thiophene-2-carbaldehyde in ethanol. For the synthesis and structural confirmation the FT-IR, ¹H, ¹³C-NMR, UV-visible spectroscopy, and mass spectrometry were carried out. The long-term stability of the probe (3) was validated by the experimental as well as theoretical studies. The sensing behaviour of the compound 3 was monitored with various metal ions (Ca²⁺, Cr³⁺, Fe³⁺, Co²⁺, Mg²⁺, Na⁺, Ni²⁺, K⁺) using UV- Vis. and fluorescence spectroscopy techniques by various methods (effect of pH and density functional theory) which showing the most potent sensing behaviour with iron. Job's plot analysis confirmed the binding stoichiometry ratio 1:1 of Fe³⁺ ion and compound 3. The limit of detection (LOD), the limit of quantification (LOQ), and association constant (K_a) were calculated as 0.113 µM, 0.375 µM, and 5.226 × 10⁵ respectively. The sensing behavior was further confirmed through spectroscopic techniques (FT-IR and ¹H-NMR) and DFT calculations. The intercalative mode of binding of oxadiazole derivative 3 with Ct-DNA was supported through UV-Vis spectroscopy, fluorescence spectroscopy, viscosity, cyclic voltammetry, and circular dichroism measurements. The binding constant, Gibb's free energy, and stern-volmer constant were find out as 1.24 × 10⁵, -29.057 kJ/mol, and 1.82 × 10⁵ respectively. The cleavage activity of pBR322 plasmid DNA was also observed at 3 × 10^-5 M concentration of compound 3. The computational binding score through molecular docking study was obtained as -7.4 kcal/mol. Additionally, the antifungal activity for compound 3 was also screened using broth dilution and disc diffusion method against C. albicans strain. The synthesized compound 3 showed good potential scavenging antioxidant activity against DPPH and H₂O₂ free radicals.

Fluorescence "Turn-off" Sensing of Iron (III) Ions Utilizing Pyrazoline Based Sensor: Experimental and Computational Study

A simple pyrazoline-based ''turn off'' fluorescent sensor 5-(4-methoxyphenyl)-3-(5-methylfuran-2-yl)-1-phenyl-4,5-dihydro-1H-pyrazole (PFM) was synthesized and well characterized by different techniques such as FT-IR, ¹H-NMR, ¹³C-NMR, and mass spectrometry. The synthesized sensor PFM was utilized for the detection of Fe³⁺ ions. Fluorescence emission selectively quenched by Fe³⁺ ions compared to other metal ions (Mn²⁺, Al³⁺, Fe²⁺, Hg²⁺, Cu²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, and Zn²⁺) via paramagnetic fluorescence quenching and showed good anti-interference ability over the existence of other tested metals. Under optimum conditions, the fluorescence intensity of sensor quenched by Fe³⁺ in the range of 0 to 3 μM with detection limit of 0.12 μM. Binding of Fe³⁺ ions to PFM solution were studied by fluorescent titration, revealed formation of 1:1 PFM-Fe metal complex and binding constant of complex was found to be of 1.3 × 10⁵ M^-1. Further, the fluorescent sensor has been potentially used for the detection of Fe³⁺ in environmental samples (river water, tap water, and sewage waste water) with satisfactory recovery values of 99-101%.

Rational design of a FRET-based ratiometric fluorescent probe with large Pseudo-Stokes shift for detecting Hg2+ in living cells based on rhodamine and anthracene fluorophores

The development of fluorescent dyes has been a continuing attractive research topic in the field of fluorescence sensing and bioimaging technologies, most of them were subject to a single signal change. In this work, a novel colorimetric and ratiometric fluorescent probe 1 based on rhodamine and anthracene groups was designed and synthesized via the fluorescence resonance energy transfer (FRET) mechanism. Probe 1 showed excellent selectivity, higher sensitivity and ratiometric response to Hg²⁺ in the CH₃CN/H₂O (1/1, v/v) system, with a fast response time (less than 30 s); The fluorescent color changed from purple to orange and the solution visible to the naked-eye changed from colorless to pink. The Pseudo-Stokes shift was 174 nm upon addition of Hg²⁺. The limit of detection (LOD) was calculated to be 0.81 μM and 0.38 μM according to fluorescence and UV/vis measurements, respectively. Furthermore, a possible mechanism for the detection of Hg²⁺ by probe 1 was verified by using ¹H NMR, ESI-MS, and HPLC spectra. Meanwhile, probe 1 was successfully used for cell imaging for the detection of Hg²⁺ in living cells.

Synthesis of high luminescent Eu3+ doped nanoparticle and its application as highly sensitive and selective detection of Fe3+ in real water and human blood serum

The present work reports a highly efficient Ca doped Eu: Y₂O₃ i.e Ca_0.05Eu_0.01Y_1.94O₃ (CEY.) nanophosphor material synthesized through a facile combustion method, as a simple and selective turn-off fluorescence probe for the quantitative analysis of iron ions (Fe³⁺). The proposed sensor allows the quantification of iron in the range of 10 µM-90 µM with a limit of detection (LOD) ∼ 63.2 nM under the natural pH range. Moreover, CEY nanophosphor shows an excellent fluorescence phenomenon with a gradual increase in the Fe³⁺ ion concentration. It has been observed that the corresponding PL intensity gets completely quenched with 500 µM Fe³⁺ ion concentration. Furthermore, the applicability of the sensor as an efficient probe has been investigated with real water samples, iron tablets, and human blood serum (HBS). The selectivity of the probe has also been analyzed with various metal ions and biomolecules. Thus, in turn, the as-obtained sensing probe illustrates an excellent accuracy, sensitivity, and selectivity, and offers potential application in clinical diagnosis, biological and real water sample studies, with the detection of Fe³⁺ ion. Furthermore, it does not require any acidic medium for a level-free, and non-enzymic detection of a real sample with almost not affecting the sample quality and henceforth provides more reliable results.

Phenanthroline Derivative Fluorescent Probe for Rapid and Sensitive Detection of Silver(I)

In the present work, a phenanthroline derivative (2-(2-methoxyphenyl)-4-phenyl-1,10-phenanthroline, MPP), as a fluorescent probe, was synthesized to realize a rapid, simple and sensitive detection of silver(I). The detection conditions of Ag⁺ were optimized. This fluorescent probe has the advantages of a fast reaction time, a wide pH applicable range, and a low detection limit, exhibiting a good linear response between the fluorescence intensity and the concentration in the range of 0.05 - 1.5 μmol/L for Ag⁺. The detection limit is as low as 3.38 × 10^-8 mol/L (S/N = 3). This probe had been used to detect Ag⁺ in real samples, and the recovery efficiency of spiked Ag⁺ had been also tested. The recovery efficiency is satisfactory, ranging from 92.0 to 105.4%. Therefore, this fluorescent probe should provide a new choice for the quantitative detection of silver ions in environmental water samples.

A novel near-infrared-emitting aza-boron-dipyrromethene-based remarkable fluorescent probe for Hg2+ in living cells

A new near-infrared (NIR)-emitting aza-boron-dipyrromethene dye with two electron-donating amino groups at 1- and 7-positions has been prepared via several steps of reactions. This probe showed a NIR absorption at 748 nm with an obvious shoulder peak at 634 nm in CH₃CN/H₂O. Interestingly, a NIR fluorescence emission at 843 nm was observed with a large Stokes shift of 95 nm. This novel NIR-emitting aza-boron-dipyrromethene dye was further investigated as a Hg²⁺-sensing fluorescent probe, which selectively bound to Hg²⁺, showing a blue-shifted and sharp absorption band at 695 nm with the disappearance of the shoulder peak at 634 nm. Correspondingly, the color change could be easily seen from blue to green. Interestingly, the emission exhibited an absolutely "turn-on" peak at 725 nm with a significant blue shift by 118 nm (from 843 to 725 nm), due to the efficient inhibition of the intramolecular-charge-transfer process arising from two amino groups. This probe was finally introduced to Hela cells, showing a "OFF-ON" NIR emission upon exposure to Hg²⁺. The overall results confirmed that this novel NIR-emitting aza-boron-dipyrromethene fluorescent probe with a large Stokes shift could serve as a colorimetric and fluorescent "turn-on" sensor for Hg²⁺ in both solutions and living cells.

Mercury Toxicity and Detection Using Chromo-Fluorogenic Chemosensors

Mercury (Hg), this non-essential heavy metal released from both industrial and natural sources entered into living bodies, and cause grievous detrimental effects to the human health and ecosystem. The monitoring of Hg2+ excessive accumulation can be beneficial to fight against the risk associated with mercury toxicity to living systems. Therefore, there is an emergent need of novel and facile analytical approaches for the monitoring of mercury levels in various environmental, industrial, and biological samples. The chromo-fluorogenic chemosensors possess the attractive analytical parameters of low-cost, enhanced detection ability with high sensitivity, simplicity, rapid on-site monitoring ability, etc. This review was narrated to summarize the mercuric ion selective chromo-fluorogenic chemosensors reported in the year 2020. The design of sensors, mechanisms, fluorophores used, analytical performance, etc. are summarized and discussed.