Kaempferol as an AIE-active natural product probe for selective Al3+ detection in Arabidopsis thaliana

Ligand-Induced Red-Emitting Copper Nanoclusters for Selective Fluorescence Determination of Aluminum Ions

Monitoring levels of excessive aluminum ions (Al3+) is crucial as it can harm the immune system, reduce enzyme activity, cause cell death, and damage environmental and biological systems. Developing a fast and efficient Al3+ ion determination method is the key to addressing this issue. In this work, red-emitting fluorescent copper nanoclusters (CuNCs) were synthesized using N-acetyl-l-cysteine (NAC) as a ligand and CuCl2·2H2O through a facile procedure. The NAC-CuNCs exhibited a large Stokes shift and displayed remarkable luminescence properties. A method for detecting Al3+ through a fluorescence probe was proposed. Its fluorescence mechanism was also explored. The probe showed rapid responsiveness (within 1 min) to Al3+ ion determination. The detection limit for Al3+ was found to be 19.7 nM, which is significantly lower than the WHO's value and most reports, with a linear range of 0-52.9 μM. The determination of Al3+ concentrations in actual water using the fluorescence probe yielded satisfactory outcomes. Moreover, the visual detection of Al3+ ions was also achieved through a smartphone, which can enhance its fast and practical detection.

Red Fluorescent Molecule with Aggregation-Induced Emission Based on Dehydroabietic Acid Diarylamine for Bioimaging

In this paper, molecules with AIE red light properties were designed by coupling dehydroabietic acid diarylamine and 2,3-diphenylfumaronitrile, which were designated 2DTPA-CN and 2TPA-CN. The emission wavelengths were 683 nm and 701 nm, respectively. The 2DTPA-CN and 2TPA-CN showed typical AIE characteristics with large Stokes shifts of 7.4 × 104 cm-1 and 6.7 × 104 cm-1, respectively. The obvious solvatochromism and electron cloud distributions of HOMO/LUMO in the ground and excited states both reveal the intramolecular charge transfer (ICT) effect. The 2DTPA-CN, boasting exceptional biocompatibility, was successfully prepared into nanoparticles (NPs), which were applied to tumor cell imaging, showing good bioimaging effects both in vitro imaging in live cells and in vivo imaging in live mice. The results demonstrated that it possesses significant potential as an effective bioimaging reagent for the detection of tumor cells. Furthermore, the incorporation of 2,3-diphenylfumaronitrile moieties to dehydroabietic acid diarylamine emerged as a proficient approach to broaden the emission wavelengths of rosin-based fluorescent materials.

Multi-site isomerization of synergistically regulated stimuli-responsive AIE materials toward multi-level decryption

Stimuli-responsive aggregation-induced emission (AIE) materials are highly sensitive and rapidly responsive to external signals, making them ideal solid materials for anti-counterfeiting encryption. However, the limited conformational and packing variations resulting from regio-isomerization with a single substituent restricts the stimuli-responsive behavior of these materials. In this work, several AIE-active regio-structural isomers based on the salicylaldehyde Schiff base scaffold have been straightforwardly obtained through multiple substitutions with bromide and triphenylamine moieties. Solvent-effect experiments demonstrate their different orders of charge-transfer and excited-state intramolecular proton transfer upon photoexcitation, indicating the regulation of excited-state processes via multi-site isomerization. These isomers also demonstrate mechanochromism and acidichromism, allowing for adjustable stimuli-responsive effects. As a demonstration, p-Br-TPA with both mechanochromism and acidichromism can be synergistically utilized for multi-level decryption. This study successfully regulates the evolution of excited states through multi-site isomerization, offering a general approach for achieving tunable stimuli-responsive properties in AIE-active salicylaldehyde Schiff bases toward multi-level decryption.

Aggregation-Induced Emission Luminogens: A New Possibility for Efficient Visualization of RNA in Plants

RNAs play important roles in regulating biological growth and development. Advancements in RNA-imaging techniques are expanding our understanding of their function. Several common RNA-labeling methods in plants have pros and cons. Simultaneously, plants' spontaneously fluorescent substances interfere with the effectiveness of RNA bioimaging. New technologies need to be introduced into plant RNA luminescence. Aggregation-induced emission luminogens (AIEgens), due to their luminescent properties, tunable molecular size, high fluorescence intensity, good photostability, and low cell toxicity, have been widely applied in the animal and medical fields. The application of this technology in plants is still at an early stage. The development of AIEgens provides more options for RNA labeling. Click chemistry provides ideas for modifying AIEgens into RNA molecules. The CRISPR/Cas13a-mediated targeting system provides a guarantee of precise RNA modification. The liquid-liquid phase separation in plant cells creates conditions for the enrichment and luminescence of AIEgens. The only thing that needs to be looked for is a specific enzyme that uses AIEgens as a substrate and modifies AIEgens onto target RNA via a click chemical reaction. With the development and progress of artificial intelligence and synthetic biology, it may soon be possible to artificially synthesize or discover such an enzyme.

Natural Acceptor of Coumarin-Isomerized Red-Emissive BioAIEgen for Monitoring Cu2+ Concentration in Live Cells via FLIM

Artificial aggregation-induced emission luminogens (AIEgens) have flourished in bio-applications with the development of synthetic chemistry, which however are plagued by issues like singularity in structures and non-renewability. The unique structures and renewability of biomass moieties can compensate for these drawbacks, but their properties are hard to design and regulate due to their confined structures. Therefore, it appears to be a reasonable approach to derive AIEgens from abundant biomass (BioAIEgens), integrating the bilateral advantages of both synthetic and natural AIEgens. In this work, the blue-violet emissive coumarin with its lactone structure serving as a rare natural acceptor, is utilized to construct donor-π-acceptor typed BioAIE isomers incorporating the propeller-like and electron-donating triphenylamine (TPA) unit. The results show that Cm-p-TPA undergoes charge transfer with its keto form, emitting red light at 600 nm, which can be applied to monitor Cu2+ concentration during mitophagy using fluorescence lifetime imaging microscopy because of the excellent biocompatibility, photostability, and specific recognition to Cu2+ . This work not only demonstrates the feasibility of utilizing positional isomerization to modulate excited-state evolutions and resultant optical properties, but also provides evidence for the rationality of constructing biologically-active BioAIEgens via a biomass-derivatization concept.

An ultra-sensitive fluorescent probe for recognition of aluminum ions and its application in environment, food, and living organisms

The concentration of aluminum ions (Al3+) is closely related to the ecological environment, food safety, and human health, with excessive accumulation of Al3+ causing irreversible damage to both the ecological balance and human health. Therefore, a fluorescent probe ABHS, based on aminobenzoylhydrazide Schiff-base, was designed and synthesized in one step with a high yield. ABHS can form a 1:1 coordination complex with Al3+ in a pure water system. It exhibits ultra-sensitive and accurate detection of Al3+ even at low concentration of Al3+, with the detection limit of 6.7 nM. Furthermore, ABHS demonstrated significant enhancement of specific fluorescence for Al3+, with rapid response speed, good stability, and robust resistance to interference. Importantly, ABHS has shown excellent detection and imaging capabilities even in complex real environmental samples, food samples, and living organisms.

Towards bioresource-based aggregation-induced emission luminogens from lignin β-O-4 motifs as renewable resources

One-pot synthesis of heterocyclic aromatics with good optical properties from phenolic β-O-4 lignin segments is of high importance to meet high value added biorefinery demands. However, executing this process remains a huge challenge due to the incompatible reaction conditions of the depolymerization of lignin β-O-4 segments containing γ-OH functionalities and bioresource-based aggregation-induced emission luminogens (BioAIEgens) formation with the desired properties. In this work, benzannulation reactions starting from lignin β-O-4 moieties with 3-alkenylated indoles catalyzed by vanadium-based complexes have been successfully developed, affording a wide range of functionalized carbazoles with up to 92% yield. Experiments and density functional theory calculations suggest that the reaction pathway involves the selective cleavage of double C-O bonds/Diels-Alder cycloaddition/dehydrogenative aromatization. Photophysical investigations show that these carbazole products represent a class of BioAIEgens with twisted intramolecular charge transfer. Distinctions of emission behavior were revealed based on unique acceptor-donor-acceptor-type molecular conformations as well as molecular packings. This work features lignin β-O-4 motifs with γ-OH functionalities as renewable substrates, without the need to apply external oxidant/reductant systems. Here, we show a concise and sustainable route to functional carbazoles with AIE properties, building a bridge between lignin and BioAIE materials.

A dual-functional fluorescent probe based on kaolin nanosheets for the detection and separation of aluminum ions

Aluminum ions (Al³⁺) are closely related to environmental protection and human health, thus the detection and separation of Al³⁺ is of great significance. In this study, a dual-functional fluorescent probe for the detection and separation of Al³⁺ was successfully developed by grafting fluorophore onto kaolin nanosheets. The probe has the characteristics of good dispersion without the involvement of organic solvents, excellent specificity, the low limit of detection (0.55 µM), and fast response time (10 min). And the recovery rates of Al³⁺ using this probe are in the range from 93.0% to 101.8%, and the corresponding relative standard deviations are in the range from 3.5% to 5.8%. Besides, it also can remove Al³⁺ in aqueous solution through adsorption, and the removal rates is in the range from 95.1% to 99.3% when the concentration of the probe is 0.4 mg/mL. The probe combines detection and separation functions, overcomes the defect that single-function materials can only be used for detection or separation, which has important significance and good application value.

Interactions of Amino Group Functionalized Tetraphenylvinyl and DNA: A Label-Free "On-Off-On" Fluorescent Aptamer Sensor toward Ampicillin

As a type of aggregation-induced emission (AIE) fluorescent probe, tetraphenylvinyl (TPE) or its derivatives are widely used in chemical imaging, biosensing and medical diagnosis. However, most studies have focused on molecular modification and functionalization of AIE to enhance the fluorescence emission intensity. There are few studies on the interaction between aggregation-induced emission luminogens (AIEgens) and nucleic acids, which was investigated in this paper. Experimental results showed the formation of a complex of AIE/DNA, leading to the quenching of the fluorescence of AIE molecules. Fluorescent test experiments with different temperatures proved that the quenching type was static quenching. The quenching constants, binding constants and thermodynamic parameters demonstrated that electrostatic and hydrophobic interactions promoted the binding process. Then, a label-free "on-off-on" fluorescent aptamer sensor for the detection of ampicillin (AMP) was constructed based on the interaction between the AIE probe and the aptamer of AMP. Linear range of the sensor is 0.2-10 nM with a limit of detection 0.06 nM. This fluorescent sensor was applied to detect AMP in real samples.

PLGA nanoparticles loaded with curcumin produced luminescence for cell bioimaging

To revise the emission of curcumin (Cur) from "off" to "on", poly (D, L-lactide-co-glycolide) acid (PLGA) nanoparticles loaded with Cur were embedded in a polyvinyl alcohol (PVA) emulsifier (named Cur@PLGA-NPs). First, the emission intensities of different nanoformulations, including liposomes, bovine serum albumin (BSA) nanoparticles, and PLGA nanoparticles, were examined to discover the most effective carriers for Cur luminescence. As a result, Cur@PLGA-NPs exhibited the highest fluorescence intensity due to aggregation-induced emission (AIE), with quantum yields of 23.78% in aqueous solution and 21.52% in the solid state. According to X-ray diffraction (XRD) data, Cur@PLGA-NPs existed in the amorphous state, with a size of 217.2 ± 5.2 nm, an encapsulation efficiency (EE) of 69.98%, and a drug loading efficiency (LE) of 1.37%. The intramolecular interactions, which included hydrophobic interactions, electrostatic interactions, π-π interactions and solvatochromic effects, stabilized the chromophore cluster of Cur@PLGA-NPs in terms of nanoparticle formulation. Compared with free Cur, Cur@PLGA-NPs sensitized CT26 cells more efficiently with an IC₅₀ value of 16.9 μmol/L and an apoptotic rate of 17.20% at 10 μmol/L Cur. Because of the robust fluorescence emission based on AIE, Cur@PLGA-NPs were utilized as a nano-AIE probe for cell bioimaging, and many red fluorescent signals were observed in CT26 cells after treatment. These results suggest that Cur@PLGA-NPs provide a novel amorphous AIE formulation with imaging and bioactive capabilities.

Theoretical Insights into the Luminescence and Sensing Mechanisms of N,N'-Bis(salicylidene)-[2-(3',4'-diaminophenyl)benzthiazole] for Copper(II)

The intramolecular proton transfer (IPT) reaction potential energy surfaces (PESs) of N,N'-bis(salicylidene)-[2-(3',4'-diaminophenyl)benzthiazole] (BTS) in the S₀ state and S₁ state are constructed. It is found that the IPT reactions in the ground state hardly take place due to the high reaction energy barrier for single-proton (6.3 kcal/mol) and double-proton transfer (14.1 kcal/mol) reactions and low backward reaction energy barriers for single-proton (1.9 kcal/mol) and double-proton transfer (1.2 kcal/mol) reactions. In comparison, an excited-state intramolecular single-proton transfer reaction is a barrierless and exothermic process, and thus, single-proton transfer tautomer T_1H contributes most to the fluorescence emission. Based on the analysis of PESs, the experimental absorption and emission spectra are reproduced well by the calculated vertical excitation energies of BTS and its photoisomerization products, and the triple fluorescence emission profile in the experiment is reassigned unequivocally. Furthermore, thermodynamic analysis of the BTS-Cu(II) complex shows that the dinuclear complex (C1) with Cu(II) coordinating with O and N atoms of the hydrogen bonds is the most thermodynamically stable structure, and the intramolecular hydrogen bonding structure in BTS is destroyed due to the chelation of Cu(II) and BTS; as a result, the IPT reaction of C1 in S₀ and S₁ states is significantly inhibited. The inhibitor of Cu(II) in the IPT reaction plays a major role in fluorescence quenching.

A novel water-soluble flavonol-based fluorescent probe for highly specific and sensitive detection of Al3+ and its application in onion and zebrafish

A novel and simple turn-on fluorescence probe (HD) for Al³⁺ detection was successfully developed based on flavonol derivatives. This probe exhibited a significantly enhanced fluorescence response toward Al³⁺ in aqueous solution which could be observed by naked-eye from poor fluorescence to strong light green emission. The probe HD displays highly specific detection for Al³⁺ over other competitive metal ions, and the detection limit of probe HD for Al³⁺ was determined to be 2.57 × 10^-8 M, which are much lower than the World Health Organization (WHO) guideline value for drinking food/water. The binding stoichiometry of probe HD with Al³⁺ was determined to be 1:1 according to Job's plot and ESI-HRMS analysis, and the binding constant was calculated to be 2.01 × 10⁴ M^-1. The probe HD exhibited high selectivity, high sensitivity, good anti-interface ability, and wide pH application range as well as the quantitative determination in the detection of Al³⁺. The coordination mechanism of probe HD with Al³⁺ was supported by density functional theory (DFT) calculations and HRMS analysis. In addition, the probe HD was found to have good cell permeability and could be applied for live-cell imaging to detect Al³⁺ in onions and zebrafish.

Highly specific esterase activated AIE plus ESIPT probe for sensitive ratiometric detection of carbaryl

Fabrication of facile, sensitive, and accurate pesticide detection strategies plays crucial roles in food safety, environmental protection, and human health. Here, a novel esterase activatable aggregation-induced emission (AIE) plus excited-state intramolecular proton transfer (ESIPT) probe, kaempferol tetraacetate, was designed and synthesized from purified natural kaempferol for ratiometric sensing of carbaryl. Acetate groups are introduced as the esterase reactive sites and AIE plus ESIPT initiator. Kaempferol tetraacetate is an aggregation-caused quenching compound that shows fluorescent (FL) emission at 415 nm. Esterase specifically hydrolyzes kaempferol tetraacetate to kaempferol with AIE plus ESIPT characteristics (distinct FL emission, 530 nm; a large Stokes shift, 165 nm within a short time (8 min). Molecular docking and kinetics performance indicate the high affinity and specific hydrolysis of esterase and kaempferol tetraacetate. Carbaryl inhibits the activity of esterase to efficiently suppress the production of kaempferol. Thus, a facile ratiometric assay strategy is constructed for carbaryl detection. By measuring the FL intensity ratio, the proposed strategy presents high selectivity and reliability with a wide linear range from 0.02 to 2.00 μg L^-1 and a very low limit of detection at 0.007 μg L^-1. Furthermore, appropriate recovery from 93.75% to 108.67% with a relative standard deviation less than 5.66% for real sample analysis indicates good accuracy and precision. All results indicate that the fabricated strategy offers a new way for facile, sensitive, and accurate detection of carbaryl in real complex samples.