Nitrogen doped graphene quantum dots based on host guest interaction for selective dual readout of dopamine

Research progress of fluorescent composites based on cyclodextrins: Preparation strategies, fluorescence properties and applications in sensing and bioimaging

Fluorescence analysis has been regarded as one of the commonly used analytical methods because of its advantages of simple operation, fast response, low cost and high sensitivity. So far, various fluorescent probes, with noble metal nanoclusters, quantum dots, organic dyes and metal organic frameworks as representatives, have been widely reported. However, single fluorescent probe often suffers from some deficiencies, such as low quantum yield, poor chemical stability, low water solubility and toxicity. To overcome these disadvantages, the introduction of cyclodextrins into fluorescent probes has become a fascinating approach. This review (with 218 references) systematically covers the research progress of fluorescent composites based on cyclodextrins in recent years. Preparation strategies, fluorescence properties, response mechanisms and applications in sensing (ions, organic pollutants, bio-related molecules, temperature, pH) and bioimaging of fluorescent composites based on cyclodextrins are summarized in detail. Finally, the current challenges and future perspectives of these composites in relative research fields are discussed.

Sensing the invisible: Ultrasensitive and selective colorimetric detection of E. coli O157:H7 based on masking the peroxidase-mimetic activity of aptamer-modified Au/Fe3O4

Escherichia coli O157:H7 (E. coli O157:H7) emerges as a significantly worrisome pathogen associated with foodborne illnesses, emphasizing the imperative for creating precise detection tools. In this investigation, we developed a sensitive colorimetric biosensor for detecting E. coli O157:H7. It was constructed using a nanozyme comprised of Au@Fe3O4 NPs, which was fabricated and subsequently modified with an aptamer (Apt). The nanozyme harnesses its inherent peroxidase-like activity to facilitate the transformation of reduced TMB into its oxidized form in the presence of H2O2, resulting in a noticeable shift to a blue color. However, the presence of E. coli O157:H7 effectively diminished the absorbance of oxidized TMB. Consequently, the normalized absorbance at 652 nm demonstrates a linear decrease corresponding to concentrations of E. coli O157:H7 within the range of 101 to 108 CFU mL-1 with a low limit of detection (LOD, S/N = 3) of 3 CFU mL-1.

Enhanced fluorescent detection of oxaliplatin via BSA@copper nanoclusters: a targeted approach for cancer drug monitoring

A new fluorescence sensing approach has been proposed for the precise determination of the anti-cancer drug oxaliplatin (Oxal-Pt). This method entails synthesizing blue-emitting copper nanoclusters (CuNCs) functionalized with bovine serum albumin (BSA) as the stabilizing agent. Upon excitation at 360 nm, the resultant probe exhibits emission at 460 nm. Notably, the fluorescence response of BSA@CuNCs substantially increases upon incubation with Oxal-Pt due to multiple binding interactions between the drug and the fluorescent probe. These interactions involve hydrogen bonding, hydrophobic interaction, and the high affinity between the SH groups (cysteine residues of BSA) and platinum (in Oxal-Pt). Consequently, this interaction induces aggregation-induced emission enhancement (AIEE) of BSA@CuNCs. The probe demonstrates a broad response range from 0.08 to 140.0 μM, along with a low detection limit of 20.0 nM, determined based on a signal-to-noise ratio of 3. Furthermore, the probe effectively detects Oxal-Pt in injections, human serum, and urine samples, yielding acceptable results. This study represents a significant advancement in the development of a straightforward and efficient sensor for monitoring platinum-containing anti-cancer drugs during chemotherapy.

Ratiometric fluorescence sensing of hazardous ciprofloxacin based on aggregation induced emission enhancement of thiolate-protected gold nanoclusters induced by La3+ ion

In this research work, ultrasensitive and reliable ratiometric sensor was designed for assay of ciprofloxacin (CIPRO). The platform consists of thiolate-protected gold nanoclusters (GSH@AuNCs) with high fluorescence quantum yield and long-term stability. In the existence of lanthanum (La3+) ion, the GSH@AuNCs emission was sharply raised owing to the formation of La3+/GSH@AuNCs system accompanied with aggregation-induced emission enhancement (AIEE). Addition of CIPRO, a good La3+ ion coordinator, decreased the fluorescence emission of La3+/GSH@AuNCs system at 610 nm significantly as a result of disaggregation caused by the removal of La3+ ion from GSH@AuNCs surface. Furthermore, the blue emission of La3+-CIPRO coordination complex appears at 440 nm. Under optimized conditions, the fluorescence ratios (F440/F610) were linearly increased with increasing the CIPRO amount within the range of 0.003-200 µM with a limit of detection equal to 0.2 nM (S/N = 3). The as-fabricated La3+/GSH@AuNCs system possesses outstanding reliability and sensitivity for the detection of CIPRO. The system was effectively used to assay CIPRO in human urine and milk specimens with recoveries % of 97.6-102.3 % and 96.7-105.7 % for urine and milk samples, respectively and RSD % did not exceed 2.5 %, suggesting the accuracy of the method.

Selective detection of rutin at novel pyridinic-nitrogen-rich carbon dots derived from chicken feet biowaste: The role of bovine serum albumin during the assay

A simple fluorescence method is described for measuring rutin dependent on the nitogen-doped carbon dots (NCDs) prepared via simple pyrolysis method from chicken feet biowaste. The as-fabricated NCDs have unique advantages including cost-effectiveness and high quantum yield (42.9 %). The as-prepared NCDs explore an optimal emission band at 430 nm following exciting NCDs at 330 nm. Addition of rutin to blue-emissive NCDs quenched their fluorescence emission by inner-filtration effect (IFE) and static quenching. Under optimized conditions, the fluorescence responses increased as the rutin amount was raised from 100 to 1000 nmol/L with 5.3 nmol/L as a detection limit (S/N = 3). The probe selectivity was improved by adding bovine serum albumin (BSA), which binds other structurally-related compounds (other flavonoids). The as-synthesized NCDs exhibited some advantages towards rutin detection such as: lower LOD value, satisfactorily reproducibility, simplicity, rapidity, selectivity, and stability. The sensing probe was efficiently utilized for determining rutin in different real samples with acceptable results. The sensor offers an efficient biowaste-based approach for the determination of (bio) molecules.

Double-signal quantification of amoxicillin based on interaction with 4-aminoantipyrine at copper and nitrogen co-doped carbon quantum dots as an artificial nanozyme

An one-pot hydrothermal method was developed for synthesis of carbon quantum dots co-doped with copper and nitrogen (Cu, N@CQDs). The synthesized Cu, N@CQDs has unique advantages such as high fluorescence quantum yield (39.1%) and high catalytic activity. Oxidative coupling of amoxicillin (AMX) with 4-aminoantipyrine (4-NH₂-APE) in the presence of H₂O₂ as an oxidant to produce pink quinoneimine chromogen was carried out with the aid of Cu, N@CQDs as a peroxidase-like catalyst. This system was used for the colorimetric and fluorometric assays of AMX with reliable results. Colorimetric method is based on the measurement of a pink-colored product at λ_max = 505 nm while the fluorometric assay is based on the quenching of the fluorescence emission of Cu, N@CQDs at 440 nm after excitation at 370 nm. For the colorimetric method, the absorption intensity linearly increased over the concentration range 4.3-110.0 µM with LOD (S/N = 3) of 1.3 µM. For the fluorometric method, the emission intensity of Cu, N@CQDs linearly decreased upon addition of AMX in the concentration range 0.2-120.0 µM with a limit of detection (LOD, S/N = 3) of 0.06 µM. The proposed system was applied to the determination of AMX in different real samples such as pharmaceutical capsules, human serum, milk, and conduit water samples with recoveries in the range 95.8-104.1% and relative standard deviation (RSD %) less than 4.1%.

L-Cysteine functionalized graphene oxide nanoarchitectonics: A metal-free Hg2+ nanosensor with peroxidase-like activity boosted by competitive adsorption

Developing non-noble metal, even metal-free chemical sensors for the detection of toxic heavy metal ions is significantly desirable for economically and environmentally sustainable application but has heretofore remained elusive. Herein, a _L-cysteine functionalized graphene oxide nanosheet (CGO) nanoarchitectonics, greenly synthesized by a very simple method at room temperature, was utilized to realize the simultaneous enrichment and colorimetric detection of trace mercury ions (Hg²⁺). It was discovered that CGO, as a nanozyme mimic exhibited greatly enhanced peroxidase-like catalytic activity than the pristine graphene oxide. By exploring the interactions of CGO nanozyme with colorimetric substrate, 3,3',5,5'-tetramethylbenzidine (TMB) and target Hg²⁺ ions, we found that the sensing principle was based mainly on the competitive adsorption between Hg²⁺ ions and TMB over CGO. The pre-capture of Hg²⁺ ions hindered the TMB binding on CGO, resulting in the promoted oxidation of TMB by H₂O₂ to produce more colored oxidation products, from which the colorimetric sensing of Hg²⁺ was realized with a good detection effect on 5 μg L^-1 solution. As an enrichment-sensing integration platform, this metal-free sensor is cost-effective and sensitive, and presents considerable anti-interference ability over other metal ions. Overall, this work not only expands the application of graphene-based materials in colorimetric detection but also provides a general sensing principle to construct highly sensitive sensors.