On-signal amplification of silver nanosol RRS/SERS aptamer detection of ultratrace urea by polystyrene nanosphere catalyst

Antibody-labeled gold nanoparticle based resonance Rayleigh scattering detection of S100B

Traumatic brain injury (TBI) is a sudden brain injury due to an external force that causes a large number of deaths and permanent disabilities every year. S100B has been recognized as a potential objective quantitative biomarker for screening the prognosis of TBI and severe head injury. In this article, an anti-S100B monoclonal antibody was immobilized on cysteamine (Cy) functionalized gold nanoparticles (AuNPs) by EDC-NHS chemistry, which enabled S100B resonance Rayleigh scattering (RRS) detection based on antibody-labeled gold nanoparticles. The prepared conjugates were characterized by ultraviolet-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS) and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Based on the specific binding of the antibody and antigen, the RRS intensities at 381 nm and 541 nm wavelengths were significantly enhanced, and thus a dual wavelength overlapping resonance Rayleigh scattering (DWO-RRS) method was established. The scattering intensity of the two overlapping peaks was proportional to the concentration of S100B in the range of 0.05-4.5 ng mL-1 with a detection limit of 0.002 ng mL-1. The proposed DWO-RRS method is time-saving, simple, sensitive, and can be used to determine the concentration of S100B in human serum with satisfactory results, which has a promising application in the early diagnosis of TBI.

A new N/Fe doped carbon dot nanosurface molecularly imprinted polymethacrylate nanoprobe for trace fipronil with SERS/RRS dimode technique

The N and Fe doped carbon dot (CDNFe) was prepared by microwave procedure. Using CDNFe as the nano-substrate, fipronil (FL) as the template molecule and α-methacrylic acid as the functional monomer, the molecular imprinted polymethacrylic acid nanoprobe (CDNFe@MIP) with difunction was synthesized by microwave procedure. The CDNFe@MIP was characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier infrared spectroscopy, and other techniques. The results show that the nanoprobe not only distinguish FL but also has a strong catalytic effect on the HAuCl4-Na2C2O4 nanogold indicator reaction. When the nanoprobes specifically recognize FL, their catalytic effect is significantly reduced. Since the AuNPs generated by HAuCl4 reduction have strong surface-enhanced Raman scattering (SERS) and resonance Rayleigh scattering (RRS) effects, a SERS/RRS dual-mode sensing platform for detecting 5-500 ng/L FL was constructed. The new analytical method was applied to detect FL in food samples with a relative standard deviation (RSD) of 3.3-8.1 % and a recovery rate of 94.6-104.5 %.

Highly Bright Gold Nanowires Arrays for Sensitive Detection of Urea and Urease

In this work, highly fluorescent gold nanowire arrays (Au NWs) are successfully synthesized by assembling Zn²⁺ ions and non-emissive oligomeric gold-thiolate clusters using mercaptopropionic acid both as a reducing agent and a growth ligand. The synthesized Au NWs exhibited strong bluish green fluorescence with an absolute quantum yield up to 32% and possessed ultrasensitive pH stimuli-responsive performance in the range of 7.0-7.8. Based on the excellent properties of the as-prepared nanowire arrays, we developed a facile, sensitive, and selective fluorescent method for quantitative detection of urea and urease. The fabricated nanoprobe showed superior biosensing response characteristics with good linearities in the range of 0-100 μM for urea concentration and 0-12 U/L for urease activity. In addition, this fluorescent probe afforded relatively high sensitivity with the detection limit as low as 2.1 μM and 0.13 U/L for urea and urease, respectively. Urea in human urine and urease in human serum were detected with satisfied results, exhibiting a promising potential for biomedical application.

Progress on aptamer-based SERS sensors for food safety and quality assessment: methodology, current applications and future trends

It is well known that food safety has aroused extensive attentions from governments to researchers and to food industries. As a versatile technology based on molecular interactions, aptamer sensors which could specifically identify a wide range of food contaminants have been extensively studied in recent years. Surface-enhanced Raman spectroscopy integrated aptamer combines the advantages of both technologies, not only in the ability to specifically identify a wide range of food contaminants, but also in the ultra-high sensitivity, simplicity, portable and speed. To provide beneficial insights into the evaluation techniques in the field of food safety, we offer a comprehensive review on the design strategies for aptamer-SERS sensors in different scenarios, including non-nucleic acid amplification methods ("on/off" mode, sandwich mode, competition model and catalytic model) and nucleic acid amplification methods (hybridization chain reaction, rolling circle amplification, catalytic hairpin assembly). Meanwhile, a special attention is paid to the application of aptamer-SERS sensors in biological (foodborne pathogenic, bacteria and mycotoxins) and chemical contamination (drug residues, metal ions, and food additives) of food matrix. Finally, the challenges and prospects of developing reliable aptamer-SERS sensors for food safety were discussed, which are expected to offer a strong guidance for further development and extended applications.

Recent Advances in DNA Nanotechnology for Plasmonic Biosensor Construction

Since 2010, DNA nanotechnology has advanced rapidly, helping overcome limitations in the use of DNA solely as genetic material. DNA nanotechnology has thus helped develop a new method for the construction of biosensors. Among bioprobe materials for biosensors, nucleic acids have shown several advantages. First, it has a complementary sequence for hybridizing the target gene. Second, DNA has various functionalities, such as DNAzymes, DNA junctions or aptamers, because of its unique folded structures with specific sequences. Third, functional groups, such as thiols, amines, or other fluorophores, can easily be introduced into DNA at the 5′ or 3′ end. Finally, DNA can easily be tailored by making junctions or origami structures; these unique structures extend the DNA arm and create a multi-functional bioprobe. Meanwhile, nanomaterials have also been used to advance plasmonic biosensor technologies. Nanomaterials provide various biosensing platforms with high sensitivity and selectivity. Several plasmonic biosensor types have been fabricated, such as surface plasmons, and Raman-based or metal-enhanced biosensors. Introducing DNA nanotechnology to plasmonic biosensors has brought in sight new horizons in the fields of biosensors and nanobiotechnology. This review discusses the recent progress of DNA nanotechnology-based plasmonic biosensors.

A New Covalent Organic Framework of Dicyandiamide-Benzaldehyde Nanocatalytic Amplification SERS/RRS Aptamer Assay for Ultratrace Oxytetracycline with the Nanogold Indicator Reaction of Polyethylene Glycol 600

In this paper, dicyandiamide (Dd) and p-benzaldehyde (Bd) were heated at 180 °C for 3 h to prepare a new type of stable covalent organic framework (COF) DdBd nanosol with high catalysis. It was characterized by molecular spectroscopy and electron microscopy. The study found that DdBd had a strong catalytic effect on the new indicator reaction of polyethylene glycol 600 (PEG600)-chloroauric acid to form gold nanoparticles (AuNPs). AuNPs have strong resonance Rayleigh scattering (RRS) activity, and in the presence of Victoria Blue B (VBB) molecular probes, they also have a strong surface-enhanced Raman scattering (SERS) effect. Combined with a highly selective oxytetracycline (OTC) aptamer (Apt) reaction, new dual-mode scattering SERS/RRS methods were developed to quantitatively analyze ultratrace OTC. The linear range of RRS is 3.00 × 10-3 -6.00 × 10-2 nmol/L, the detection limit is 1.1 × 10-3 nmol/L, the linear range of SERS is 3.00 × 10-3-7.00 × 10-2 nmol/L, and the detection limit is 9.0 × 10-4 nmol/L. Using the SERS method to analyze OTC in soil samples, the relative standard deviation is 1.35-4.78%, and the recovery rate is 94.3-104.9%.