Ratiometric fluorescence detection of ciprofloxacin using the terbium-based coordination polymers

A magnetic bead-based dual-aptamer sandwich assay for quantitative detection of ciprofloxacin using CRISPR/Cas12a

Ciprofloxacin (CIP) is a broad-spectrum fluoroquinolone antibiotic, and its excessive residues in food and water sources pose potential risks to human health. Therefore, there is a need for a rapid and convenient method for its accurate quantification. The clustered regularly interspaced short palindromic repeat (CRISPR)/Cas12a system has gained extensive application in signal detection and amplification due to the trans-cleavage activity of Cas12a. In this study, we devised a novel magnetic bead-based dual sandwich aptamer coupled with a CRISPR/Cas12a system for the precise quantification of CIP in milk, river water, and honey. Through the incorporation of a magnetic bead-based dual aptamer sandwich approach, the concentration of CIP in the samples was pre-enriched. Additionally, by optimizing the Fluorescence-Quencher (F-Q) probe concentration, detection aptamer (APTd) concentration, and assay duration, the limit of blank (LOB) of the system was determined as 362 nM, while the limit of detection (LOD) was determined as 403 nM. This enabled the accurate quantification of CIP within the linear range of 0.5 μM to 0.2 mM with high specificity. Moreover, the performance of this detection method was comparable to that of high-performance liquid chromatography (HPLC) in river water, milk, and honey samples.

Fluorescence array sensor based on lanthanide complex for pattern recognition detection of fluoroquinolone antibiotics

Fluoroquinolone antibiotics, a class of animal and human useful antibiotics, are widely utilized in numerous fields including biomedical science, animal husbandry, and aquatic finfish farming. Its high demand and wide application have directly or indirectly led to substantial consumption and discharge of antibiotics, affecting not only the environment but also endangering human health through bioaccumulation. Hence, rapid and precise detection of trace antibiotics in water, food, and biological samples is critically important. This research synthesized Tb3+/Eu3+ complexes with dual emission centers, and a fluorescence sensor array was constructed with the fluorescence intensity ratio F1/F2 of the two emission centers as a signal. Different sensitization effect of fluoroquinolone antibiotics towards lanthanide complexes aided in differentiating five fluoroquinolone antibiotics from two others. Additionally, the sensor array can effectively detect fluoroquinolone antibiotics in real samples, suggesting its reliability and practicality of complex sample analysis. The excellent qualitative and quantitative analysis ability of this strategy for fluoroquinolone antibiotics offers a novel perspective for antibiotic residue detection, showcasing a new opportunity for lanthanide complex application in sensor arrays.

Construction of carbon quantum dots/riboflavin fluorescent probe and its application in the detection of ciprofloxacin

The research outlined a novel approach for creating a sensitive and efficient ratio fluorescent probe for ciprofloxacin (CIP) detection. The method used the biomass materials passionfruit shell and diethylenetriamine as carbon and nitrogen sources, respectively, to prepare blue fluorescent carbon quantum dots (b-CQDs) with an average size of 3.29 nm and a quantum yield of 19.6% by a hydrothermal method. The newly designed b-CQDs/riboflavin ratio fluorescent probe demonstrates a distinct advantage for CIP monitoring, exhibiting a marked increase in fluorescence intensity at 445 nm upon interaction with CIP, while maintaining a stable intensity at 510 nm. In the water system, the I445 nm/I510 nm ratio of the fluorescent probe showed a significant linear relationship with CIP at the concentrations of 0-250 μmol·L-1, and the probe boasts a low detection limit of 0.86 μmol·L-1. The outstanding selectivity, broad detection range, low detection limits, and high quantum yield of the b-CQDs highlight their significant potential in the development of advanced sensing probes for efficient detection of ciprofloxacin, offering promising insights for future sensor technology advancements.

Selective fluorescence detection of acetylsalicylic acid, succinic acid and ascorbic acid based on a responsive lanthanide metal fluorescent coordination polymer

A fluorescent sensor for highly selective and ultrasensitive detection of acetylsalicylic acid (ASA), succinic acid (SA), and ascorbic acid (AA) was reported. The water-soluble fluorescent ligand salicylic acid (Sal) was generated through catalyzing ASA by the hydrolase activity of zeolitic-imidazolate framework-8 (ZIF-8) or natural esterase (Est). The Sal can coordinate with 2-methylimidazole (2-MIm) and Ln(III) to form a fluorescent lanthanide coordination polymer (LCP), which has a fluorescence emission peak with the maximum wavelength at 412 nm (the excitation wavelength at 300 nm). Therefore, the detection of ASA can be achieved through the fluorescence intensity changes of LCPs in the system, which has comparable sensitivity and good selectivity (linear range of 0.031-1.00 mM and LODs of 11.72 and 3.22 μM) as compared to a direct reaction between Est/ZIF-8 and ASA for detecting ASA (linear range of 0.05-1.20 mM and limits of detection (LODs) of 4.43 and 4.58 μM). Furthermore, upon the addition of SA and AA, the fluorescence intensity of the reaction system can be enhanced and weakened through changing the energy resonance transfer pathways and affecting the enzymatic reaction process, respectively, realizing their sensitive and selective fluorescence detection. The established fluorescent sensors can work well in a wide linear range of SA concentrations from 0 to 2.50 mM (Est-based reaction system) and 0 to 1.50 mM (ZIF-8-based reaction system) with the LODs of 0.032 and 0.028 mM, respectively. The linear ranges of AA concentrations are from 0.0078 to 0.25 mM (Est-based reaction system) and 0.0078 to 0.13 mM (ZIF-8-based reaction system) with the LODs of 2.54 and 3.80 μM, respectively. The established sensors were successfully used in the detection of SA in rabbit plasma, with a recovery of 84.0%-98.7%. Additionally, the contents of ASA in Aspirin Enteric-Coated tablets and AA in vitamin C tablets were also determined by the developed methods.

A novel N-CNDs/PAni modified molecular imprinted polymer for ultraselective and sensitive detection of ciprofloxacin in lentic ecosystems: a dual responsive optical sensor

The research study describes the development of a hybrid nanocomposite called nitro-doped carbon nanodots/polyaniline/molecularly imprinted polymer (N-CNDs/PAni/MIP). This composite is specifically engineered to function as a durable and flexible dual-response sensor to detect and analyze pharmaceutical organic contaminants (POCs). Powder X-Ray diffraction (PXRD), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were employed to perform an exhaustive structural and morphological analysis of N-CNDs/PAni/MIP. N-CNDs/PAni/MIP emitted blue luminescence under ultraviolet irradiation and exhibited typical excitation-dependent emission properties. It can act as fluorescent probe for the detection of CIPRO with high selectivity and sensitivity with an IF value of 4.2. Furthermore, N-CNDs/PAni/MIP exhibited high peroxidase-like catalytic behavior. After adding CIPRO to the N-CNDs/PAni/MIP/TMB/H2O2 system, the blue color of the solution faded due to the reduction of blue ox-TMB to colorless TMB. Based on these two phenomena, with CIPRO as the target analyte, the N-CNDs/PAni/MIP dual sensor showed a minimal detection limit of 70 pM for the fluorescent signaling platform and 3.5 nM for the colorimetric probe with a linear range of 0.038-200 nM. The fluorometric and colorimetric assays based on N-CNDs/PAni/MIP for CIPRO detection were then successfully applied to lentic water as well as to tap water samples, demonstrating the sensitivity and dependability of the instrument. Furthermore, the synthesized PVA (N-CNDs/PAni/MIP) films enable the recognition of CIPRO, and these films have the potential to be integrated into portable sensing devices, providing a practical solution for rapid and on-site detection of CIPRO in various samples.

Ratiometric luminescence detection of H2O2 in food samples using a terbium coordination polymer sensitized with 3-carboxyphenylboronic acid

A ratiometric luminescent probe was fabricated using adenosine monophosphate (AMP) as a bridging ligand and 3-carboxyphenylboronic acid (3-CPBA) as the sensitizer and functional ligand that allowed the probe to recognize hydrogen peroxide (H2O2). The probe was labeled AMP-Tb/3-CPBA. Adding H2O2 caused the nonluminescent 3-CPBA to be converted into 3-hydroxybenzoic acid, which strongly luminesces at 401 nm. This meant that adding H2O2 decreased the AMP-Tb/3-CPBA luminescence intensity at 544 nm and caused luminescence at 401 nm. The 401 and 544 nm luminescence intensity ratio (I401/I544) was strongly associated with the H2O2 concentration between 0.1 and 60.0 μM, and the detection limit was 0.23 μM. Dual emission reverse-change ratio luminescence sensing using the probe allowed environmental effects to be excluded and the assay to be very selective. We believe that the results pave the way for the development of new functionalized lanthanide coordination polymers for use in luminescence assays.

A ternary nucleotide-lanthanide coordination nanoprobe for ratiometric fluorescence detection of ciprofloxacin

Ciprofloxacin (CIP) is a widely used broad-spectrum antibiotic and has been associated with various side effects, making its accurate detection crucial for patient safety, drug quality compliance, and environmental and food safety. This study presents the development of a ternary nucleotide-lanthanide coordination nanoprobe, GMP-Tb-BDC (GMP: guanosine 5'-monophosphate, BDC: 2-amino-1,4-benzenedicarboxylic acid), for the sensitive and ratiometric detection of CIP. The GMP-Tb-BDC nanoprobe was constructed by incorporating the blue-emissive ligand BDC into the Tb/GMP coordination polymers. Upon the addition of CIP, the fluorescence of terbium ion (Tb3+ ) was significantly enhanced due to the coordination and fluorescence sensitization properties of CIP, while the emission of the BDC ligand remained unchanged. The nanoprobe demonstrated good linearity in the concentration range of 0-10 μM CIP. By leveraging mobile phone software to analyze the color signals, rapid on-site analysis of CIP was achieved. Furthermore, the nanoprobe exhibited accurate analysis of CIP in actual drug and milk samples. This study showcases the potential of the GMP-Tb-BDC nanoprobe for practical applications in CIP detection.

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

Ratiometric fluorescence sensing of hazardous ciprofloxacin based on aggregation induced emission enhancement of thiolate-protected gold nanoclusters induced by La3+ ion

In this research work, ultrasensitive and reliable ratiometric sensor was designed for assay of ciprofloxacin (CIPRO). The platform consists of thiolate-protected gold nanoclusters (GSH@AuNCs) with high fluorescence quantum yield and long-term stability. In the existence of lanthanum (La3+) ion, the GSH@AuNCs emission was sharply raised owing to the formation of La3+/GSH@AuNCs system accompanied with aggregation-induced emission enhancement (AIEE). Addition of CIPRO, a good La3+ ion coordinator, decreased the fluorescence emission of La3+/GSH@AuNCs system at 610 nm significantly as a result of disaggregation caused by the removal of La3+ ion from GSH@AuNCs surface. Furthermore, the blue emission of La3+-CIPRO coordination complex appears at 440 nm. Under optimized conditions, the fluorescence ratios (F440/F610) were linearly increased with increasing the CIPRO amount within the range of 0.003-200 µM with a limit of detection equal to 0.2 nM (S/N = 3). The as-fabricated La3+/GSH@AuNCs system possesses outstanding reliability and sensitivity for the detection of CIPRO. The system was effectively used to assay CIPRO in human urine and milk specimens with recoveries % of 97.6-102.3 % and 96.7-105.7 % for urine and milk samples, respectively and RSD % did not exceed 2.5 %, suggesting the accuracy of the method.

Citrate Functionalized Zirconium-Based Metal Organic Framework for the Fluorescent Detection of Ciprofloxacin in Aqueous Media

Ciprofloxacin (CIP) is a commonly used antibiotic for the treatment of infectious diseases in humans and as a prophylactic agent in the livestock industry, leading to the environmental discharge of significant amounts of CIP. CIP is stable in aquatic systems leading to its pseudo-persistence. Constant exposure to these antibiotics results in the generation of antibiotic-resistant pathogens and potential toxicity/hypersensitivity in humans. Therefore, it is necessary to develop a convenient, rapid, and cost-effective method for the monitoring of ciprofloxacin in environmental samples. Rhodamine-based fluorescent receptors have the limitation of aqueous solubility. Therefore, in order to overcome this drawback, we designed a novel fluorescent receptor based on a zirconium-based metal organic framework (MOF-808). The precursor, MOF-808, was synthesized and functionalized by using sodium citrate to obtain a receptor called C-MOF-808. The C-MOF-808 was structurally characterized by XRD and spectroscopic analyses. Thus, this synthesized receptor can be used for the fluorescent detection of CIP in aqueous media with a detection limit of 9.4 µM. The detection phenomena of the receptor were studied by absorption as well as fluorescent spectra. The binding behavior of CIP with the receptor was studied by FT-IR and ¹H-NMR analyses, and a binding mechanism is proposed.

Highly selective fluorescence detection of Pt4+ over Pd2+ and Pt2+ using a polyethyleneimine-based nanosensor prepared via facile three-component reaction

A novel polyethyleneimine (PEI)-based polymeric nanosensor (named PEIMP) was developed for specific fluorescence enhanced sensing of Pt⁴⁺ ion in aqueous media. The sensor was fabricated via "one-pot" three-component reaction using ortho-phthalaldehyde (OPA), PEI and mercaptopurine as raw materials, by which the formation of isoindole fluorophore and its chemical grafting onto PEI chain were achieved simultaneously. The morphology, size and structure of PEIMP have been characterized by various techniques. In buffered aqueous solution (pH 7.0), PEIMP had the ability to specifically bind with Pt⁴⁺ producing notable increase in fluorescence emission at 463 nm (excited at 395 nm). Based on investigations on the sensing mechanism, the fluorescence turn-on response towards Pt⁴⁺ was attributed to the binding of Pt⁴⁺ with purine group in PEIMP resulting in the inhibition of photoinduced electron transfer from purine to isoindole fluorophore. Under the optimal conditions (pH 7.0, incubated at 37 ℃ for 20 min) the detection of Pt⁴⁺ could be achieved with the linear range of 0.1-10 μM and the detection limit of 80 nM. The sensor had the advantages of low-cost raw materials, simple and environmental-friendly synthesis and analytical detection procedures. What's more, it could selectively and sensitively detect Pt⁴⁺ without the effects from common transition metal ions (Pb²⁺, Fe³⁺, Cr³⁺, Al³⁺, Ag⁺, Co²⁺, Hg²⁺, Cd²⁺, Cu²⁺, Mg²⁺, Ni²⁺, Mn²⁺, Zn²⁺), especially precious metalions of Pt²⁺ and Pd²⁺. The proposed method had been successfully applied to quantify Pt⁴⁺ in wastewater and urine samples, and also proved to be potential for monitoring Pt⁴⁺ in biological systems.

Recent Progresses in NIR-II Luminescent Bio/Chemo Sensors Based on Lanthanide Nanocrystals

Fluorescent bio/chemosensors are widely used in the field of biological research and medical diagnosis, with the advantages of non-invasiveness, high sensitivity, and good selectivity. In particular, luminescent bio/chemosensors, based on lanthanide nanocrystals (LnNCs) with a second near-infrared (NIR-II) emission, have attracted much attention, owing to greater penetration depth, aside from the merits of narrow emission band, abundant emission lines, and long lifetimes. In this review, NIR-II LnNCs-based bio/chemo sensors are summarized from the perspectives of the mechanisms of NIR-II luminescence, synthesis method of LnNCs, strategy of luminescence enhancement, sensing mechanism, and targeted bio/chemo category. Finally, the problems that exist in present LnNCs-based bio/chemosensors are discussed, and the future development trend is prospected.

Moxifloxacin detection based on fluorescence resonance energy transfer from carbon quantum dots to moxifloxacin using a ratiometric fluorescence probe

With an increase in the MOX concentration, the fluorescence intensity of CQDs decreases, whereas the fluorescence intensity of MOX increases gradually.