Dual-emitting metal-organic frameworks for ratiometric fluorescence detection of fluoride and Al3+ in sequence

Smartphone-based dual inverse signal MOFs fluorescence sensing for intelligent on-site visual detection of malachite green

The development of intelligent, sensitive, and visual methods for the rapid detection of veterinary drug residues is essential to ensure food quality and safety. Here, a smartphone-based dual inverse signal MOFs fluorescence sensing system was proposed for intelligent in-site visual detection of malachite green (MG). A UiO-66-NH2@RhB-dual-emission fluorescent probe was successfully synthesized in one step using a simple one-pot method. The inner filter effect (IFE) quenches the red fluorescence, while hydrogen bonding interaction enhances the blue fluorescence, enabling highly sensitive, accurate, and visual detection of MG dual inverse signals through fluorescence analysis. The probe showed great linearity over a wide range of 0.1-100 μmol/L, with a limit of detection (LOD) of 20 nmol/L. By integrating smartphone photography and RGB (red, green, and blue) analysis, accurate quantitative analysis of MG in water and actual fish samples can be achieved within 5 min. This developed platform holds great promise for the on-site detection of MG in practical applications, with the advantages of simplicity, cost-effectiveness, and rapidity. Consequently, it may open up a new pathway for on-site evaluation of food safety and environmental health.

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

A pyridine modified naphthol hydrazone Schiff base chemosensor for Al3+ via intramolecular charge transfer process

A pyridine modified naphthol hydrazone Schiff base chemosensor, NaPy, was prepared in a two-step process to detect aluminum ion (Al3+) in different samples. The probe shows a turn-off emission response towards Al3+ at a 1:1 binding stoichiometry via intramolecular charge transfer (ICT) mechanism, as validated by density functional theory (DFT) calculations and a series of spectroscopic measurements. The response time is slightly over one minute with a limit of detection (LOD) value of 0.164 µM, demonstrating the great sensitivity of the probe. It is also found that NaPy exhibits high selectivity towards Al3+ and resists interference from seventeen other cations. Application investigations in paper strips, water samples and HeLa cells suggest that NaPy can be used as an efficient probe for sensing Al3+ in real environmental samples and biosystems.

Vitamin B6-based fluorescence chemosensor for selective detection of F- ions: design, synthesis, and characterization

The present paper reports on the synthesis and characterization of a new chemosensor for fluoride ions, a hydrazone derived from pyridoxal 5'-phosphate and benzothiazole. The structure of the chemosensor was confirmed using 1H and 13C NMR, FT-IR and mass spectroscopy. The conformational diversity of the chemosensor influencing the sensor activity was studied by the quantum chemistry methods on the B3LYP/6-311++G(d, p) (H, C, N, O, P, S) level, and the optimal structure of the chemosensor was chosen. The selective capability of detecting F- in the aqueous solution, which also contains Cl-, Br-, I-, NCS-, ClO4-, HSO4-, and NO3- was demonstrated. The detection limit (LOD) for fluoride ions was 0.22 µM as determined by the 3σ method. The turn-on effect in the presence of fluoride ions is based on the deprotonation of the chemosensor and its subsequent aggregation in DMSO. In addition, the chemosensor was used for the detection and estimation of F- in real samples using fluorescence spectroscopy.

Development of the Colorimetric and/or Fluorescent Probes for Detecting Fluoride ions in Aqueous Solution

Fluoride ion is a strong Lewis base and one of the essential trace elements in human body. It plays a very important role in human health and ecological balance. The deficiency or excessive intake of fluoride ions will cause serious health problems, so the development of a sensitive and accurate detection method for fluoride ions is very important. The colorimetric and/or fluorescence sensing method has been a long standing attractive technique with high sensitivity and fast response. To date, most reported probes for fluoride ion are applicable only in organic solvents or organic-containing aqueous solutions. However, the probes for fluoride ion used in aqueous solution are more practically needed in view of environment protection and human health. In this paper, the materials and designing ideas of the colorimetric and/or fluorescent probes for fluoride ion based on different detection mechanisms in recent years were reviewed. Two main categories including formation of hydrogen bonds and formation of coordination covalent bonds were discussed. The latter one is further subdivided into three types, formation of B-F bond, formation of Si-F bond and formation of Mn+-F bond.

A new zinc-organic framework with 1D channel for constructing a ratiometric Al3+-selective sensor and four inputs INHIBIT logic gate

To develop Al³⁺ fluorescent sensor is significant because the abnormal levels of Al³⁺ in environment may pose great threat to human body. Herein, a novel metal-organic framework {Zn(Dpada)(Imdba)·H₂O}_n (Dpada = 3, 6-di(1H-imidazol-1-yl) pyridazine and Imdba = 2, 2'-iminodibenzoic acid), named Zn-MOF, has been architected with one-dimensional channel under hydrothermal conditions. Zn-MOF exhibits good thermal and solvent stability and can also keep structural integrity over the pH range of 5.0 - 9.0. Fluorescent experiments show that Zn-MOF has high selectivity and sensitivity towards Al³⁺ via ratiometric fluorescence signal changes (F_{470 nm}/F_{390 nm}) and the detection limit is evaluated to be 0.69 μM. In addition, Zn-MOF performs good recyclability in sensing of Al³⁺ with at least 5 cycles. Besides, an INHIBIT logic gate has been constructed with chemical ions (Al³⁺, Cr³⁺, Fe³⁺ and Hg²⁺) as input signals and emission ratio (F_{470 nm}/F_{390 nm}) as output signal. Significantly, Zn-MOF can be applied to tracing Al³⁺ using real water samples, presenting great potential in water quality monitoring application.

Ultrasensitive colorimetric detection of fluoride and arsenate in water and mammalian cells using recyclable metal oxacalixarene probe: a lateral flow assay

Globally 3 billion people are consuming water with moderately high concentrations of fluoride and arsenic. The development of a simple point of care (PoC) device or home device for the detection of fluoride/arsenic ensures safety before consuming water. Till date, lateral flow assay (LFA) based PoC devices can detect nucleic acids, viruses and diseases. An aluminium complex of rhodamine B functionalized oxacalix[4]arene (L) was designed to execute the LFA-based PoC device. Initially, Al³⁺ and Fe³⁺ ions were involved in complexation with the rhodamine B functionalized oxacalix[4]arene (L), resulting C₁ (L-Al³⁺) and C₂ (L-Fe³⁺) complexes respectively. The receptor L, as well as the probes (C₁, C₂), were characterized thoroughly using mass spectroscopy, FTIR, NMR, and EA. C₁ and C₂ were further utilized as recyclable probes for the detection of aqueous fluoride (21 ppb) and arsenate (1.92 ppb) respectively. The computational calculation indicates that upon complexation, the spirolactam ring opening at the rhodamine B site leads to optoelectronic changes. The consistency of LFA-based portable sensing device has been tested with water samples, synthetic fluoride standards and dental care products like toothpaste and mouthwash with concentrations ≥ 3 ppm. Moreover, fixed cell imaging experiments were performed to ascertain the in-vitro sensing phenomena.

A Ratiometric Fluorescent Sensor Based on Dye/Tb (III) Functionalized UiO-66 for Highly Sensitive Detection of TDGA

Thiodiglycolic acid (TDGA) is a biomarker for monitoring vinyl chloride exposure. Exploring a facile, rapid and precise analysis technology to quantify TDGA is of great significance. In this research, we demonstrate a fluorescent sensor based on dual-emissive UiO-66 for TDGA detection. This ratiometric fluorescent material named C460@Tb-UiO-66-(COOH)₂ was designed and synthesized by introducing organic dye 7-diethylamino-4-methylcoumarin (C460) and Tb³⁺ into UiO-66-(COOH)₂. The as-obtained C460@Tb-UiO-66-(COOH)₂ samples showed highly selective recognition, excellent anti-interference and rapid response characteristics for the recognition of TDGA. The detection limit is 0.518 mg·mL^-1, which is much lower than the threshold of 20 mg·mL^-1 for a healthy person. In addition, the mechanism of TDGA-induced fluorescence quenching is discussed in detail. This sensor is expected to detect TDGA content in human urine.