Optimization of the petroleum wastewater treatment process using TiO2/Zn photocatalyst

Synthesis and utilization of titanium dioxide nano particle (TiO2NPs) for photocatalytic degradation of organics

A green technique that emerged as a promise in the degradation of numerous organic contaminants is photocatalysis. The aim of this study concerns photocatalytic degradation of organic using titanium dioxide nano particles (TiO2 NPs) which syntheses from ilmenite by different leaching methods using different ingredients such as HCl, HNO3 and Aqua Regia. The affecting factors such as rate of addition, reaction time, ilmenite grain size, acid to ilmenite ratio and reaction temperature were conducted. Comprehensive physicochemical characterization of Ilmenite and TiO2 NPs were conducted using different analytical techniques such as XRD, XRF, SEM, TEM and FTIR. Photocatalytic degradation of organics is confirmed by studies of affecting factors on the effectiveness of TiO2 NPs such as dose, agitation forces, light intensity, initial concentration, pH, time, and temperature. The removal percentages of TSS, COD, BOD and TN of organics were explored. From the results the maximum removal percentage of TSS were 97.3 and 96.9% before and after secondary treatment conducted using ferric chloride (FC). The maximum removal percentage of TKN, BOD, and COD before secondary treatment were conducted using mixture of TiO2 NPs, FC, and chitosan, which reached 44.2, 44 and 46.3%, respectively. The maximum removal percentage of TKN, BOD, and COD after secondary treatment were conducted using mixture of TiO2 NPs, FC, and chitosan, which reached 94.9, 99.7 and 99.6%, respectively. Overall, the results derived from this investigation suggest that the TiO2 NPs/UV holds significant advanced treatment of sewage water, making it a viable choice for water reuse applications.

Optimization of catalytic wet air oxidation process in microchannel reactor for TBBS wastewater treatment

Catalytic wet air oxidation (CWAO) process is employed for the treatment of N-tert-butyl-2-benzothiazolesulfenamide (TBBS) wastewater in a microchannel reactor that enables continuous operation of the reaction and allows for thorough mixing of oxygen and pollutants. To achieve the optimal process performance, four key parameters of pressure, temperature, time, and the mass ratio of input oxygen to wastewater COD are optimized using both response surface methodology (RSM) and backpropagation artificial neural network (BP-ANN). According to the correlation coefficients of model results and experimental data, BP-ANN performs better than RSM in simulation and prediction. The analysis of variance in RSM shows that all parameters are significant for the obtained quadratic model, but their interactions with each other are not significant. Connection weights algorithm is used to determine the relative importance of these parameters for the process efficiency, and it is demonstrated that temperature is the most influential parameter with a relative importance of 35.61%, followed by pressure (29.74%), time (19.53%) and ROC (15.12%).

A Study of the Degradation of LEV by Transparent PVA/NCD-TiO2 Nanocomposite Films with Enhanced Visible-Light Photocatalytic Activity

In recent years, antibiotics (such as levofloxacin (LEV)) have been detected widely in the environment. Semiconductor photocatalysis has been recognized as a promising technology for removing pollutants in the environment. In this work, nitrogen and carbon codoped titanium dioxide nano-catalyst (NCD-TiO2) was immobilized in polyvinyl alcohol (PVA) matrix to form PVA/NCD-TiO2 films through solution casting and thermal treatment, which exhibited good photocatalytic efficiency for LEV degradation. The results showed that about 42% LEV can be degraded after 2 h in the presence of PVA/NCD-TiO2 nanocomposite film (the weight ratio of NCD-TiO2 to PVA is 8% and thermal treatment is 120 °C) under visible light. Moreover, possible pathways of photocatalytic degradation of LEV according to the detected intermediates are proposed, which provide insight into the degradation mechanism of LEV by using PVA/NCD-TiO2 photocatalytic films. Finally, the synthesized PVA/NCD-TiO2 films exhibited excellent reusability and stability in photocatalysis. This work provides fundamental support for the design of a high-stability, excellent photocatalyst for practical application.

A Review of Hybrid Process Development Based on Electrochemical and Advanced Oxidation Processes for the Treatment of Industrial Wastewater

Nowadays, increased human activity, industrialization, and urbanization result in the production of enormous quantities of wastewater. Generally, physicochemical and biological methods are employed to treat industrial effluent and wastewater and have demonstrated high efficacy in removing pollutants. However, some industrial effluent and wastewater contain contaminants that are extremely difficult to remove using standard physicochemical and biological processes. Previously, electrochemical and hybrid advanced oxidation processes (AOP) were considered a viable and promising alternative for achieving an adequate effluent treatment strategy in such instances. These processes rely on the production of hydroxyl radicals, which are highly reactive oxidants that efficiently break down contaminants found in wastewater and industrial effluent. This review focuses on the removal of contaminants from industrial effluents and wastewater through the integration of electrochemical and advanced oxidation techniques. These processes include electrooxidation, electrocoagulation/electroflocculation, electroflotation, photo-Fenton, ozone-photo-Fenton, sono-photo-Fenton, photo-electro-Fenton, ozone/electrocoagulation, sono-electrocoagulation, and peroxi/photo/electrocoagulation. The data acquired from over 150 published articles, most of which were laboratory experiments, demonstrated that the hybrid process is more effective in removing contaminants from industrial effluent and wastewater than standalone processes.