Impedimetric aptasensor for HER2 biomarker using graphene quantum dots, polypyrrole and cobalt phthalocyanine modified electrodes

Impedimetric Polyaniline-Based Aptasensor for Aflatoxin B1 Determination in Agricultural Products

An impedimetric aptasensor based on a polyaniline (PAni) support matrix is developed through the surface modification of a screen-printed carbon electrode (SPE) for aflatoxin B₁ (AFB₁) detection in foodstuffs and feedstuffs for food safety. The PAni is synthesized with the chemical oxidation method and characterized with potentiostat/galvanostat, FTIR, and UV-vis spectroscopy techniques. The stepwise fabrication procedure of the PAni-based aptasensor is characterized by means of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. The impedimetric aptasensor is optimized using the EIS technique, and its feasibility of detecting AFB₁ in real sample matrices is evaluated via a recovery study in spiked foodstuffs and feedstuffs, such as pistachio nuts, cinnamons, cloves, corn, and soybeans, with a good recovery percentage, ranging from 87.9% to 94.7%. The charge transfer resistance (R_CT) at the aptasensor interface increases linearly with the AFB₁ concentration in the range of 3 × 10^-2 nM to 8 × 10^-2 nM, with a regression coefficient (R²) value of 0.9991 and detection limit of 0.01 nM. The proposed aptasensor is highly selective towards AFB₁ and partially selective to AFB₂ and ochratoxin A (OTA) due to their similar structures that differ only at the carbon-carbon double bond located at C₈ and C₉ and the large molecule size of OTA.

A Comprehensive Review on Electrochemical Nano Biosensors for Precise Detection of Blood-Based Oncomarkers in Breast Cancer

Breast cancer (BC), one of the most common and life-threatening cancers, has the highest incidence rate among women. Early diagnosis of BC oncomarkers is considered the most effective strategy for detecting and treating BC. Finding the type and stage of BC in women as soon as possible is one of the greatest ways to stop its incidence and negative effects on medical treatment. The development of biosensors for early, sensitive, and selective detection of oncomarkers has recently attracted much attention. An electrochemical nano biosensor (EN) is a very suitable option for a powerful tool for cancer diagnosis. This comprehensive review provides information about the prevalence and pathobiology of BC, recent advances in clinically available BC oncomarkers, and the most common electrochemical nano biosensors for point-of-care (POC) detection of various BC oncomarkers using nanomaterial-based signal amplification techniques.

MoS2-Carbon Nanodots as a New Electrochemiluminescence Platform for Breast Cancer Biomarker Detection

In this work, we present the combination of two different types of nanomaterials, 2D molybdenum disulfide nanosheets (MoS₂-NS) and zero-dimensional carbon nanodots (CDs), for the development of a new electrochemiluminescence (ECL) platform for the early detection and quantification of the biomarker human epidermal growth factor receptor 2 (HER2), whose overexpression is associated with breast cancer. MoS₂-NS are used as an immobilization platform for the thiolated aptamer, which can recognize the HER2 epitope peptide with high affinity, and CDs act as coreactants of the anodic oxidation of the luminophore [Ru(bpy)₃]²⁺. The HER2 biomarker is detected by changes in the ECL signal of the [Ru(bpy)₃]²⁺/CD system, with a low detection limit of 1.84 fg/mL and a wide linear range. The proposed method has been successfully applied to detect the HER2 biomarker in human serum samples.

An ultrasensitive dual-signal ratio electrochemical aptamer biosensor for the detection of HER2

Electrochemical ratiometric biosensors have received attention from researchers because of their self-calibration capability, which can improve the accuracy of detection. In the present study, a ratiometric dual signal electrochemical aptamer biosensor based on ZIF-67 @polydopamine (PDA) nanocomposite and Cu/UiO-66 @ 3, 3', 5, 5'-tetramethylbenzidine (TMB) nanocomposite was fabricated for the detection of breast cancer biomarker- human epidermal growth factor receptor 2 (HER2). PDA was chosen as the electroactive material with electrochemical redox activity and ZIF-67 with a high specific surface area, forming the ZIF-67 @PDA+Apt as the nanoprobe for capturing HER2 in this paper. Cu/UiO-66 is a bimetallic compound with high stability, specific surface area, and strong adsorption onto aptamer chains, and the Cu/UiO-66 @TMB+Apt nanocomposite was used as a probe for signal labeling. In the presence of HER2, the capture of HER2 by the ZIF-67 @PDA+Apt probe results in a weakening of the conductivity of the electrode, however, by attenuating the electrochemical signal from the PDA, altering the probe-Cu/UiO-66 @TMB+Apt signaling will result in the enhancement of the TMB electrochemical signal. With a sensitive detection of HER2 biomarkers in as little as 30 min with the detection range of 0.75-40 pg/mL and a limit of detection as low as 44.8 fg/mL. Dual signal ratio biosensors have a low limit of detection, short detection time, which can accurately detect targets in complex biological samples, which has important theoretical importance.

Recent Advances in Electrochemical Aptasensors for Detection of Biomarkers

The early diagnosis of diseases is of great importance for the effective treatment of patients. Biomarkers are one of the most promising medical approaches in the diagnosis of diseases and their progress and facilitate reaching this goal. Among the many methods developed in the detection of biomarkers, aptamer-based biosensors (aptasensors) have shown great promise. Aptamers are promising diagnostic molecules with high sensitivity and selectivity, low-cost synthesis, easy modification, low toxicity, and high stability. Electrochemical aptasensors with high sensitivity and accuracy have attracted considerable attention in the field of biomarker detection. In this review, we will summarize recent advances in biomarker detection using electrochemical aptasensors. The principles of detection, sensitivity, selectivity, and other important factors in aptasensor performance are investigated. Finally, advantages and challenges of the developed aptasensors are discussed.

Graphene quantum dots: synthesis, properties, and applications to the development of optical and electrochemical sensors for chemical sensing

GQDs exhibits exceptional electrochemical activity owing to their active edge sites that make them very attractive for biosensing applications. However, their use in the design of new biosensing devices for application to the detection and quantification of toxins, pathogens, and clinical biomarkers has so far not investigated in detail. In this regard, herein we provide a detailed review on various methodologies employed for the synthesis of GQDs, including bottom-up and top-down approaches, with a special focus on their applications in biosensing via fluorescence, photoluminescence, chemiluminescence, electrochemiluminescence, fluorescence resonance energy transfer, and electrochemical techniques. We believe that this review will shed light on the critical issues and widen the applications of GQDs for the design of biosensors with improved analytical response for future applications. HIGHLIGHTS: • Properties of GQDs play a critical role in biosensing applications. • Synthesis of GQDs using top-down and bottom-up approaches is discussed comprehensively. • Overview of advancements in GQD-based sensors over the last decade. • Methods for the design of selective and sensitive GQD-based sensors. • Challenges and opportunities for future GQD-based sensors.