Remediation of Pb (II) ions from Kagara gold mining effluent using cotton hull adsorbent

Removal of Toxic Lead from Wastewater by Lupinus albus Seed Hull

In this work, we address two concerns at once: waste reduction and the development of a lead removal adsorbent. The potential of Lupinus albus seed hull (LSH) powder as an efficient, innovative, and economical adsorbent for Pb(II) absorption was examined in this study. Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and scanning electron microscopy investigations were used to determine the structural and morphological properties of the LSH adsorbent. The adsorption process was studied in batch mode with multiple process variables (adsorbent dosage of 4.0-20 g/L; solution pH of 1.5-5.5; contact time of 15-70 min). By fitting the equilibrium data to the Langmuir isotherm model, the maximum adsorption capacity of Pb(II) was 357.14 mg/g at optimized pH (5.5), LSH dose (0.4 g), and interaction time (60 min) with starting Pb(II) concentration of 50 mg L-1. As for the reaction kinetics, the pseudo-second-order model was shown to be a convenient match. LSH can be reused after four desorption/adsorption cycles and has a high potential for eliminating Pb(II) from wastewater.

Adsorption of anionic and cationic dyes in aqueous solution by a sustainable and low-cost activated carbon based on argan solid waste treated with H3PO4

The objective of this work is to study the adsorption capacity of a natural and low-cost material prepared from argan waste treated with H₃PO₄ towards two dyes of different molecular charges and presenting an acute toxicity, the methyl orange (MO, anionic dye) and the methylene blue (MB, cationic dye). The prepared adsorbent was characterized by SEM, EDX, FTIR, and BET specific surface. These analyses showed the presence of C (42%), O (55%), and P (3%) and a remarkable difference between the morphology of the precursor and that of the obtained material with a specific surface of 475 m²/g and a very porous structure as well as the main functional groups, O-H, C=O, and C-H. The influence of the pH showed a maximum adsorption at pH =2 for MO and at pH = 10 for MB. Investigation of the effect of time on the adsorption of anionic and cationic dyes revealed that the contact time at equilibrium was 240 and 180 min, respectively. The isotherms that best fit the adsorption of MO and MB are the Langmuir model and the Freundlich model respectively. The kinetic study showed that the experimental data are in agreement with the pseudo-second-order model. Regeneration of the saturated material was also studied for the probability of reusing the adsorbent in many experiments. The valorization of argan waste into activated carbon using H₃PO₄ has allowed to obtain an effective adsorbent for the removal of anionic and cationic dyes and create an added value for environmental sustainability.

Poly(vinylbenzyl Pyridinium Salts) as Novel Sorbents for Hazardous Metals Ions Removal

Novel efficient complexing resins—poly(vinylbenzyl pyridinium salts) fabricated through poly(vinylbenzyl halogene-co-divinylbenzene) quaternization of N-decyloxy-1-(pyridin-3-yl)ethaneimine and N-decyloxy-1-(pyridin-4-yl)ethaneimine—were tested as adsorbents of Pb(II), Cd(II), Cu(II), Zn(II), and Ni(II) from aqueous solutions. The structure of these materials was established by 13C CP-MAS NMR, X-ray photoelectron spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy, as well as thermogravimetric and differential thermal analyses. The textural properties were determined using scanning electron microscopy and low-temperature N2 sorption. Based on the conducted sorption studies, it was shown that the uptake behavior of the metal ions towards novel resins depended on the type of functionalities, contact time, pH, metal concentrations, and the resin dosage. The Langmuir model was investigated to be the best one for fitting isothermal adsorption equilibrium data, and the corresponding adsorption capacities were predicted to be 296.4, 201.8, 83.8, 38.1, and 39.3 mg/g for Pb(II), Zn(II), Cd(II), Cu(II), and Ni(II), respectively. These results confirmed that owing to the presence of the functional pyridinium groups, the resins demonstrated proficient metal ion removal capacities. Furthermore, VBBr-D4EI could be successfully used for the selective uptake of Pb(II) from wastewater. It was also shown that the novel resins can be regenerated without significant loss of their sorption capacity.

Novel Mesoporous Organosilicas with Task Ionic Liquids: Properties and High Adsorption Performance for Pb(II)

Removal of toxic contaminants such as Pb(II) from waste solutions is environmentally requested. Therefore, in this paper, for potential novel sorbents, mesoporous ionic liquid-functionalized silicas were synthesized and tested for the removal of Pb(II) from aqueous solutions. The successful synthesis of the adsorbents was proved by nuclear magnetic resonance (²⁹Si and ¹³C NMR), Fourier transform infrared spectroscopy (FTIR), and elemental analysis. The structural and textural properties were determined using scanning electron microscopy (SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (TEM), and low-temperature N₂ sorption, and the result showed that the applied procedure made it possible to obtain highly ordered particles with a two-dimensional mesostructure. The effects of several parameters including initial pH, contact time, adsorption temperature, and Pb(II) concentration were studied in detail and were discussed to evaluate the adsorption properties of the fabricated materials towards Pb(II). The obtained results confirmed a very high potential of the sorbents; however, the adsorption properties depend on the structure and amounts of the functional group onto fabricated materials. The sample ILS-Ox3-40 showed fast kinetics (equilibrium reached within 10 min) and capacity of 172 mg/g, and that makes it a promising sorbent for the cleanup of water contaminated by lead. It was also indicated that, regardless on structure of the tested materials, the Pb(II) removal was spontaneous and exothermic. The fabricated mesoporous silicas exhibited that they were easy to regenerate and had excellent reusability.

Application of waste cotton yarn as adsorbent of heavy metal ions from single and mixed solutions

In this study, waste cotton yarn was used for the removal of Pb (II), Cd (II), Cr (III), and As (V) from aqueous solution. Adsorption of heavy metal ions was tested from single ion solutions, while competitive studies were performed using two- and four-ion mixtures. In order to change the structure of the material, cotton yarn was modified by sodium hydroxide solution. The surface of raw and modified cotton yarn were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and streaming potential method for determination of an isoelectric point. Sorption studies were performed on the basis of pH, kinetics, isotherms, and desorption results. It has been shown that waste cotton yarn modification, typically, does not improve the sorption capacity of the material and that the unmodified material could be used for the removal of examined heavy metal ions. Selectivity was in order Pb > Cd > Cr > As. Desorption studies have indicated to the possible reusability of the sorbent only in the case of Pb removal. A potential application of spent waste sorbent for the soil quality improvement has been considered.