Interface enhanced superconductivity in monolayer FeSe films on MgO(001): charge transfer with atomic substitution

Advancing Superconductivity with Interface Engineering

The development of superconducting materials has attracted significant attention not only for their improved performance, such as high transition temperature (TC), but also for the exploration of their underlying physical mechanisms. Recently, considerable efforts have been focused on interfaces of materials, a distinct category capable of inducing superconductivity at non-superconducting material interfaces or augmenting the TC at the interface between a superconducting material and a non-superconducting material. Here, two distinct types of interfaces along with their unique characteristics are reviewed: interfacial superconductivity and interface-enhanced superconductivity, with a focus on the crucial factors and potential mechanisms responsible for enhancing superconducting performance. A series of materials systems is discussed, encompassing both historical developments and recent progress from the perspectives of technical innovations and the exploration of new material classes. The overarching goal is to illuminate pathways toward achieving high TC, expanding the potential of superconducting parameters across interfaces, and propelling superconductivity research toward practical, high-temperature applications.

Inferior Interfacial Superconductivity in 1 UC FeSe/SrVO3/SrTiO3 with Screened Interfacial Electron-Phonon Coupling

Single-unit cell (1 UC) FeSe interfaced with TiOx or FeOx exhibits significantly enhanced superconductivity compared to that of bulk FeSe, with interfacial electron-phonon coupling (EPC) playing a crucial role. However, the reduced dimensionality in 1 UC FeSe, which may drive superconducting fluctuations, complicates our understanding of the enhancement mechanisms. We construct a new superconducting interface, 1 UC FeSe/SrVO3/SrTiO3. Here, the itinerant electrons of highly metallic SrVO3 films can screen all high-energy Fuchs-Kliewer phonons, including those of SrTiO3, making it the first FeSe/oxide system with screened interfacial EPC while maintaining the 1 UC FeSe thickness. Despite comparable doping levels, the heavily electron-doped 1 UC FeSe/SrVO3 exhibits a pairing temperature (Tg ∼ 48 K) lower than those of FeSe/SrTiO3 and FeSe/LaFeO3. Our findings disentangle the contributions of interfacial EPC from dimensionality in terms of enhancing Tg in FeSe/oxide interfaces, underscoring the critical importance of interfacial EPC. This FeSe/VOx interface also provides a platform for studying interfacial superconductivity.

Exploring the 4d1analogue of cuprates: theoretical studies on bulk NbF4and NbF4monolayer stabilized on MgO (001) plane

The recent research in infinite-layer nickelates has inspired new effort in finding the cuprate analogs. Here we propose that NbF₄, which contains niobium-centered fluorine octahedra, is a promising 4d¹analogue of cuprates. Using the density functional theory, we first show that bulk NbF₄is in close proximity tod¹configuration, with Nb4dxyorbital nearly half-filled. A single band with dominating4dxycharacter crosses the Fermi level, forming a square-like Fermi surface. The intralayer G-type antiferromagnetic (AFM) order is energetically favored and the Coulomb interaction drives the system into an AFM insulator. Next we demonstrate that the NbF₄layer can be stabilized on MgO substrate with main electronic and magnetic features retained, offering an alternative route to realize the NbF₄-related high-T_csuperconductors. Furthermore, we derive effective single orbital models for both systems and investigate the electron correlation effects via functional renormalization group. We find that the G-type AFM dominates near half-filling butdx2-y2-wave superconductivity (SC) prevails upon suitable hole/electron doping. Based on the striking similarities between NbF₄and cuprates, we suggest that NbF₄-related compounds may be exotic candidates for searching new high-T_csuperconductors.

Effects of Te- and Fe-doping on the superconducting properties in FeySe1-xTex thin films

High quality FeySe1-xTex epitaxial thin films have been fabricated on TiO2-buffered SrTiO3 substrates by pulsed laser deposition technology. There is a significant composition deviation between the nominal target and the thin film. Te doping can affect the Se/Te ratio and Fe content in chemical composition. The superconducting transition temperature Tc is closely related to the chemical composition. Fe vacancies are beneficial for the FeySe1-xTex films to exhibit the higher Tc. A 3D phase diagram is given that the optimize range is x = 0.13-0.15 and y = 0.73-0.78 for FeySe1-xTex films. The anisotropic, effective pining energy, and critical current density for the Fe0.72Se0.94Te0.06, Fe0.76Se0.87Te0.13 and Fe0.91Se0.77Te0.23 films were studied in detail. The scanning transmission electron microscopy images display a regular atomic arrangement at the interfacial structure.

Chemical Composition Control at the Substrate Interface as the Key for FeSe Thin-Film Growth

The strong fascination exerted by the binary compound of FeSe demands reliable engineering protocols and more effective approaches toward inducing superconductivity in FeSe thin films. Our study addresses the peculiarities in pulsed laser deposition that determine FeSe thin-film growth and focuses on the film/substrate interface, which has only been considered hypothetically in the past literature. The FeSe/MgO interface has been assumed (1) to be clean and (2) to obey lattice-matching epitaxy. Our studies reveal that both assumptions are misleading and demonstrate the tendency for domain-matching epitaxial growth, which accompanies the problem of chemical heterogeneity. We propose that homogenization of the film/substrate interface by an Fe buffer can improve the control of stoichiometry and nanostrain in a way that favors superconductivity even in ultrathin FeSe films. We will also show that on a chemically homogenized FeSe/Fe interface, the control of film texture with preparation conditions is still possible.

High temperature superconductivity at FeSe/LaFeO3 interface

Enormous enhancement of superconducting pairing temperature (Tg) to 65 K in FeSe/SrTiO3 has made it a spotlight. Despite the effort of interfacial engineering, FeSe interfaced with TiOx remains the unique case in hosting high Tg, hindering a decisive understanding on the general mechanism and ways to further improving Tg. Here we constructed a new high-Tg interface, single-layer FeSe interfaced with FeOx-terminated LaFeO3. Large superconducting gap and diamagnetic response evidence that the superconducting pairing can emerge near 80 K, highest amongst all-known interfacial superconductors. Combining various techniques, we reveal interfacial charge transfer and strong interfacial electron-phonon coupling (EPC) in FeSe/LaFeO3, showing that the cooperative pairing mechanism works beyond FeSe-TiOx. Intriguingly, the stronger interfacial EPC than that in FeSe/SrTiO3 is likely induced by the stronger interfacial bonding in FeSe/LaFeO3, and can explain the higher Tg according to recent theoretical calculations, pointing out a workable route in designing new interfaces to achieve higher Tg.

Recent Advances in 2D Superconductors

The emergence of superconductivity in 2D materials has attracted much attention and there has been rapid development in recent years because of their fruitful physical properties, such as high transition temperature (T_c ), continuous phase transition, and enhanced parallel critical magnetic field (B_c ). Tremendous efforts have been devoted to exploring different physical parameters to figure out the mechanisms behind the unexpected superconductivity phenomena, including adjusting the thickness of samples, fabricating various heterostructures, tuning the carrier density by electric field and chemical doping, and so on. Here, different types of 2D superconductivity with their unique characteristics are introduced, including the conventional Bardeen-Cooper-Schrieffer superconductivity in ultrathin films, high-T_c superconductivity in Fe-based and Cu-based 2D superconductors, unconventional superconductivity in newly discovered twist-angle bilayer graphene, superconductivity with enhanced B_c , and topological superconductivity. A perspective toward this field is then proposed based on academic knowledge from the recently reported literature. The aim is to provide researchers with a clear and comprehensive understanding about the newly developed 2D superconductivity and promote the development of this field much further.

Atomically Thin Superconductors

In recent years, atomically thin superconductors, including atomically thin elemental superconductors, single layer FeSe films, and few-layer cuprate superconductors, have been studied extensively. This hot research field is mainly driven by the discovery of significant superconductivity enhancement and high-temperature interface superconductivity in single-layer FeSe films epitaxially grown on SrTiO₃ substrates in 2012. This study has attracted tremendous research interest and generated more studies focusing on further enhancing superconductivity and finding the origin of the superconductivity. A few years later, research on atomically thin superconductors has extended to cuprate superconductors, unveiling many intriguing properties that have neither been proposed or observed previously. These new discoveries challenge the current theory regarding the superconducting mechanism of unconventional superconductors and indicate new directions on how to achieve high-transition-temperature superconductors. Herein, this exciting recent progress is briefly discussed, with a focus on the recent progress in identifying new atomically thin superconductors.

Highly-Tunable Crystal Structure and Physical Properties in FeSe-Based Superconductors

Here, crystal structure, electronic structure, chemical substitution, pressure-dependent superconductivity, and thickness-dependent properties in FeSe-based superconductors are systemically reviewed. First, the superconductivity versus chemical substitution is reviewed, where the doping at Fe or Se sites induces different effects on the superconducting critical temperature (Tc). Meanwhile, the application of high pressure is extremely effective in enhancing Tc and simultaneously induces magnetism. Second, the intercalated-FeSe superconductors exhibit higher Tc from 30 to 46 K. Such an enhancement is mainly caused by the charge transfer from the intercalated organic and inorganic layer. Finally, the highest Tc emerging in single-unit-cell FeSe on the SrTiO3 substrate is discussed, where electron-phonon coupling between FeSe and the substrate could enhance Tc to as high as 65 K or 100 K. The step-wise increment of Tc indicates that the synergic effect of carrier doping and electron-phonon coupling plays a critical role in tuning the electronic structure and superconductivity in FeSe-based superconductors.

Enhanced Superconducting State in FeSe/SrTiO_{3} by a Dynamic Interfacial Polaron Mechanism

The observation of substantially enhanced superconductivity of single-layer FeSe films on SrTiO_{3} has stimulated intensive research interest. At present, conclusive experimental data on the corresponding electron-boson interaction is still missing. Here we use inelastic electron scattering spectroscopy and angle resolved photoemission spectroscopy to show that the electrons in these systems are dressed by the strongly polarized lattice distortions of the SrTiO_{3}, and the indispensable nonadiabatic nature of such a coupling leads to the formation of dynamic interfacial polarons. Furthermore, the collective motion of the polarons results in a polaronic plasmon mode, which is unambiguously correlated with the surface phonons of SrTiO_{3} in the presence of the FeSe films. A microscopic model is developed showing that the interfacial polaron-polaron interaction leads to the superconductivity enhancement.