Synergistic effects of crystal structure and oxygen vacancy on Bi2O3 polymorphs: intermediates activation, photocatalytic reaction efficiency, and conversion pathway

Microfluidic Continuous Synthesis of Size- and Facet-Controlled Porous Bi2O3 Nanospheres for Efficient CO2 to Formate Catalysis

Bismuth-based catalysts are effective in converting carbon dioxide into formate via electrocatalysis. Precise control of the morphology, size, and facets of bismuth-based catalysts is crucial for achieving high selectivity and activity. In this work, an efficient, large-scale continuous production strategy is developed for achieving a porous nanospheres Bi2O3-FDCA material. First-principles simulations conducted in advance indicate that the Bi2O3 (111)/(200) facets help reduce the overpotential for formate production in electrocatalytic carbon dioxide reduction reaction (ECO2RR). Subsequently, using microfluidic technology and molecular control to precisely adjust the amount of 2, 5-furandicarboxylic acid, nanomaterials rich in (111)/(200) facets are successfully synthesized. Additionally, the morphology of the porous nanospheres significantly increases the adsorption capacity and active sites for carbon dioxide. These synergistic effects allow the porous Bi2O3-FDCA nanospheres to stably operate for 90 h in a flow cell at a current density of ≈250 mA cm- 2, with an average Faradaic efficiency for formate exceeding 90%. The approach of theoretically guided microfluidic technology for the large-scale synthesis of finely structured, efficient bismuth-based materials for ECO2RR may provide valuable references for the chemical engineering of intelligent nanocatalysts.

One-step in-situ construction engineering of ZnO-Zn2SnO4 heterojunction for deeply photocatalytic oxidation of nitric oxide

The generation of hazardous intermediates during the process of photocatalytic nitric oxide (NO) oxidation presents a tough issue. Herein, a one-step microwave strategy was employed to introduce oxygen vacancies (OVs) into zinc oxide-zinc stannate (ZnO-Zn2SnO4) heterojunction, resulting in an improvement in the photocatalytic efficiency for NO removal. The construction ZnO-Zn2SnO4 heterojunction with the OVs (ZSO-3) owns a significant contribution towards highly efficient electron transfer efficiency (99.7%), which renders ZSO-3 to exert a deep oxidation of NO-to-nitrate (NO3-) rather than NO-to-nitrite (NO2-) or NO-to-nitrogen dioxide (NO2). Based on the solid supports of experimental and simulated calculations, it can be found that OVs play an irreplaceable role in activating small molecules such as NO and O2. Moreover, the enhanced adsorption capacity of small molecules, which guarantees the high yield of active radical due to the formation of S-scheme heterojunction. This work illuminates a novel viewpoint on one-step in-situ route to prepare Zn2SnO4-based heterojunction photocatalyst with deep oxidation ability of NO-to-NO3-.

Crystal-Phase and Surface-Structure Engineering of Bi2O3 for Enhanced Electrochemical N2 Fixation to NH3

The nitrogen reduction reaction (NRR) for ammonia synthesis is hindered by weak N2 adsorption/activation abilities and the hydrogen evolution reaction (HER). In this study, αBi2O3 (monoclinic) and βBi2O3 (tetragonal) were first synthesized by calcination at different temperatures. Experiments and calculations revealed the effects of Bi2O3 with different crystal phases on N2 adsorption/activation abilities and HER. Then, αBi2O3-x and βBi2O3-x series catalysts with surface oxygen vacancies (OVs) and Bi0 active sites were synthesized through the partial in situ reduction method. The results demonstrate the following: (I) Tetragonal βBi2O3 can better adsorb N2 and cleave the N≡N bond, thereby obtaining a lower NRR rate-limiting energy barrier (*N≡N → *N≡N-H, 0.51 eV). Meanwhile, βBi2O3 can effectively suppress HER by limiting proton adsorption (H+ + e- → *H, 0.54 eV). Therefore, βBi2O3-x series catalysts exhibit higher NH3 yield and FE than αBi2O3-x. Meanwhile, in situ FTIR further confirms that βBi2O3 could better adsorb/activate N2, and the NRR distal mechanism occurs on the Bi2O3 surface. (II) The introduction of NaBH4 promotes the conversion of part of Bi3+ on the Bi2O3 surface into Bi0 and releases OVs. The additional active sites (OVs and Bi0) enhance the overall catalyst's adsorption/activation capacity for N2, further increasing the NH3 yield and FE. Meanwhile, semimetal Bi0 can effectively limit electron accessibility, thereby inhibiting the combination of charges and adsorbed protons, reducing the HER reaction and improving the FE of NRR. Therefore, the introduction of NaBH4 effectively improved the NH3 yield and FE of the αBi2O3-x and βBi2O3-x series catalysts. After optimization, the βBi2O3-0.6 catalyst has the best NRR performance (NH3 yield: 51.36 μg h-1 mg-1cat.; FE: 38.67%), which is superior to the majority of bismuth-based NRR catalysts. This work not only studies the effects of Bi2O3 with different crystal phases on N2 and HER reaction but also effectively regulates the active components of Bi2O3 surface, thereby realizing efficient NRR to NH3 reaction, which provide valuable insights for the rational design of Bi-based NRR electrocatalysts.

Concentrated Formic Acid from CO2 Electrolysis for Directly Driving Fuel Cell

The production of formic acid via electrochemical CO2 reduction may serve as a key link for the carbon cycle in the formic acid economy, yet its practical feasibility is largely limited by the quantity and concentration of the product. Here we demonstrate continuous electrochemical CO2 reduction for formic acid production at 2 M at an industrial-level current densities (i.e., 200 mA cm-2 ) for 300 h on membrane electrode assembly using scalable lattice-distorted bismuth catalysts. The optimized catalysts also enable a Faradaic efficiency for formate of 94.2 % and a highest partial formate current density of 1.16 A cm-2 , reaching a production rate of 21.7 mmol cm-2  h-1 . To assess the practicality of this system, we perform a comprehensive techno-economic analysis and life cycle assessment, showing that our approach can potentially substitute conventional methyl formate hydrolysis for industrial formic acid production. Furthermore, the resultant formic acid serves as direct fuel for air-breathing formic acid fuel cells, boasting a power density of 55 mW cm-2 and an exceptional thermal efficiency of 20.1 %.

A review of self-cleaning photocatalytic surface: Effect of surface characteristics on photocatalytic activity for NO

Self-cleaning surface has attracted much attention in the field of photocatalytic degradation of NO due to its dirt pickup resistance and self-cleaning effect under the action of rainwater. In this review, the factors affecting NO degradation efficiency were analyzed in terms of photocatalyst characteristics and environmental conditions combined with the photocatalytic degradation mechanism. The feasibility of photocatalytic degradation of NO on superhydrophilic, superhydrophobic and superamphiphobic surfaces was discussed. Furthermore, the effect of special surface characteristics of self-cleaning on photocatalytic NO was highlighted and the improvement of the long-term effect using three self-cleaning surfaces on photocatalytic NO was evaluated and summarized. Finally, the conclusion and outlook were proposed related to the self-cleaning surface for photocatalytic degradation of NO. In future research, the comprehensive effects of the characteristics of photocatalytic materials, self-cleaning characteristics and environmental factors on the photocatalytic degradation of NO and the actual application effects of such self-cleaning photocatalytic surfaces should be further clarified in combination with the engineering. It is believed that this review can provide some theoretical basis and support for the development of self-cleaning surfaces in the field of photocatalytic degradation of NO.

Intrinsic point defects and the n- and p-type dopability in α- and β-Bi2O3 photocatalysts

In this work, all kinds of intrinsic point defects, unintentional N and H impurities and possible complex defects between impurities and native defects in α- and β-Bi₂O₃ with different growth conditions are systematically investigated using hybrid density functional calculations. And then, the n- or p-type doping mechanisms in α- and β-Bi₂O₃ are explored and discussed. It is found that α-Bi₂O₃ presents the n-type conductivity under O-poor conditions. The unintentional H interstitials as the shallow donors should be majorly responsible for the n-type conductivity character. While under O-rich conditions, α-Bi₂O₃ displays the p-type conductivity, and the unintentional complex defects V_Bi1 + 2H as the shallow acceptors should be the primary origins of the p-type conductivity. The hydrogenation of the Bi vacancy in α-Bi₂O₃ not only significantly lowers the formation energy of the Bi vacancy but also markedly decreases its acceptor transition level. This well explains the experimental observation that α-Bi₂O₃ changes from n-type to p-type conductivity with increasing O partial pressure. Compared to α-Bi₂O₃, β-Bi₂O₃ always presents the n-type conductivity behaviour regardless of the growth conditions. The native O1 vacancies (V_O1) and unintentional H interstitials in β-Bi₂O₃ are shallow and excellent donors. They are responsible for the n-type conductivity and further perfectly explain the observed unintentional n-type conductivity character in β-Bi₂O₃ experiments. Understanding the defect physics in α- and β-Bi₂O₃ could inspire more significant studies on developing Bi₂O₃-based photocatalysts.

La2Ti2O7 nanosheets modified by Pt quantum dots for efficient NO removal avoiding NO2 secondary pollutant

Two-dimensional La₂Ti₂O₇ nanosheets with regular morphology and good dispersion were prepared by the hydrothermal method under a magnetic field. Zero-dimensional Pt quantum dots (Pt-QDs) were loaded on the La₂Ti₂O₇ nanosheets. The electron-hole separation and carrier transfer in the Pt-loaded La₂Ti₂O₇ nanosheets were significantly enhanced. The La₂Ti₂O₇ nanosheets loaded with 3 wt% Pt-QDs exhibit the largest NO removal efficiency of 51% and less than 3.2 ppb NO₂ intermediate pollutant in 30 min. The high photocatalytic ability was attributed to the surface plasmon resonance in Pt-QDs and the enhanced electron-hole separation. A large number of e^-, h⁺, •OH and •O₂^- active species were formed on the surface of Pt-loaded La₂Ti₂O₇ nanosheets under light irradiation. The conversion pathway from NO to NO₃^- was verified by the in situ diffuse reflectance infrared Fourier-transform spectroscopy and DFT calculation. This work supplies a feasible approach to responsive photocatalysts for efficient, stable, and selective NO removal avoiding the NO₂ secondary pollutant.

Bismuth-based semiconductors applied in photocatalytic reduction processes: fundamentals, advances and future perspectives

Bismuth-based semiconductors (BBSs) with their typical layered structures and unique electronic properties are considered an attractive visible light-responsive photocatalysts. Recently, BBS exhibited promising properties and was rapidly developed in photoreduction reactions. In this review, we firstly focus on the photoreduction reactions of BBS with a description of the basic principles. Specifically, the restrictive factors of the photoreduction reactions and the design directions of the catalysts are addressed. BBS photocatalysts, such as bismuth oxide, bismuth halide oxide and bismuth-based oxygenates, are presented in terms of the catalyst material design, crystal structure and other features. Furthermore, the primary applications of BBS in photoreduction reactions are described, including CO₂ reduction, N₂ reduction, H₂ evolution, and nitrate reduction. Additionally, the advances and shortages of BBS applied in these processes are summarized and comprehensively discussed. Future works for BBS applied in photoreduction processes are also proposed.

Subsurface Engineering Induced Fermi Level De-pinning in Metal Oxide Semiconductors for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising approach for renewable solar light conversion. However, surface Fermi level pinning (FLP), caused by surface trap states, severely restricts the PEC activities. Theoretical calculations indicate subsurface oxygen vacancy (sub-O_v ) could release the FLP and retain the active structure. A series of metal oxide semiconductors with sub-O_v were prepared through precisely regulated spin-coating and calcination. Etching X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), and electron energy loss spectra (EELS) demonstrated O_v located at sub ∼2-5 nm region. Mott-Schottky and open circuit photovoltage results confirmed the surface trap states elimination and Fermi level de-pinning. Thus, superior PEC performances of 5.1, 3.4, and 2.1 mA cm^-2 at 1.23 V vs. RHE were achieved on BiVO₄ , Bi₂ O₃ , TiO₂ with outstanding stability for 72 h, outperforming most reported works under the identical conditions.

Visible-light driven p-n heterojunction formed between α-Bi2O3 and Bi2O2CO3 for efficient photocatalytic degradation of tetracycline

To improve the efficiency of photocatalytic oxidative degradation of antibiotic pollutants, it is essential to develop an efficient and stable photocatalyst. In this study, a polymer-assisted facile synthesis strategy is proposed for the polymorph-controlled α-Bi2O3/Bi2O2CO3 heterojunction retained at elevated calcination temperatures. The p-n heterojunction can effectively separate and migrate electron-hole pairs, which improves visible-light-driven photocatalytic degradation from tetracycline (TC). The BO-400@PAN-140 photocatalyst achieves the highest pollutant removal efficiency of 98.21% for photocatalytic tetracycline degradation in 1 h (λ > 420 nm), and the degradation efficiency was maintained above 95% after 5 cycles. The morphology, crystal structure, and chemical state of the composites were analysed by scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Ultraviolet-visible diffuse reflection, transient photocurrent response, and electrochemical impedance spectroscopy were adopted to identify the charge transfer and separation efficiency of photogenerated electron-hole pairs. The EPR results verified h+ and ˙OH radicals as the primary active species in the photocatalytic oxidation reactions. This observation was also consistent with the results of radical trapping experiments. In addition, the key intermediate products of the photocatalytic degradation of TC over BO-400@PAN-140 were identified via high-performance liquid chromatography-mass spectrometry, which is compatible with two possible photocatalytic reaction pathways. This work provides instructive guidelines for designing heterojunction photocatalysts via a polymer-assisted semiconductor crystallographic transition pathway for TC degradation into cleaner production.

Photocatalytic destruction of volatile aromatic compounds by platinized titanium dioxide in relation to the relative effect of the number of methyl groups on the benzene ring

The photocatalytic destruction (PCD) of volatile organic compounds (VOC) into environmentally benign compounds is one of the most ideal routes for the management of indoor air quality. It is nevertheless not easy to achieve the mineralization of aromatic VOC through PCD technology because of their recalcitrant structures (i.e., conjugated π benzene ring). In this research, the PCD potential against three model aromatic hydrocarbons (i.e., benzene (B), toluene (T), and m-xylene (X): namely, BTX) has been explored using a titanium dioxide (TiO₂) supported platinum (Pt) catalyst after the high-temperature hydrogen (H₂)-based reduction (R) pre-treatment (i.e., Pt/TiO₂-R). The effects of the key process variables (e.g., relative humidity (RH), oxygen (O₂) content, flow rate, VOC concentration, and the co-presence of VOC) on the PCD efficiency and related mechanisms were also assessed in detail. The PCD efficiency is seen to increase with the rise in the increasing number of methyl groups on the benzene ring (in the order of benzene (46.5%), toluene (68.2%), and m-xylene (95.9%)), as the adsorption and activation of the VOC molecule on the photocatalyst surface are promoted by the increased distribution of electrons on the benzene ring. The BTX were oxidated subsequently by the photogenerated reactive oxygen species (ROS), i.e., the hydroxyl radicals (•OH) and superoxide anion radicals (•O₂^-). The overall results of this study are expected to help expand the applicability of photocatalysis towards air quality management by offering detailed insights into the factors and processes governing the photocatalytic decomposition of aromatic VOCs.

Singlet Oxygen and Mobile Hydroxyl Radicals Co-operating on Gas-Solid Catalytic Reaction Interfaces for Deeply Oxidizing NOx

Learning from the important role of porphyrin-based chromophores in natural photosynthesis, a bionic photocatalytic system based on tetrakis (4-carboxyphenyl) porphyrin-coupled TiO₂ was designed for photo-induced treating low-concentration NO_x indoor gas (550 parts per billion), achieving a high NO removal rate of 91% and a long stability under visible-light (λ ≥ 420 nm) irradiation. Besides the great contribution of the conventional ^•O₂^- reactive species, a synergic effect between a singlet oxygen (¹O₂) and mobile hydroxyl radicals (^•OH_f) was first illustrated for removing NO_x indoor gas (¹O₂ + 2NO → 2NO₂, NO₂ + ^•OH_f → HNO₃), inhibiting the production of the byproducts of NO₂. This work is helpful for understanding the surface mechanism of photocatalytic NO_x oxidation and provides a new perspective for the development of highly efficient air purification systems.

Thermally induced oxygen related defects in eco-friendly ZnFe2O4 nanoparticles for enhanced wastewater treatment efficiencies

Herein, a simple but highly effective strategy of thermal annealing to modulate oxygen vacancies related defects in ZnFe₂O₄ (ZFO) nanoparticles for obtaining enhanced wastewater treatment efficiencies is reported. The as-prepared nanoparticles were thermally annealed at three different temperatures (500 °C, 600 °C and 700 °C) and their phase purity was confirmed by X-ray diffraction (XRD). All samples were found to exhibit pure phases of ZFO with different crystallite sizes ranging from 10 nm to 25 nm. The transmission electron microscope (TEM) images showed well dispersed nanoparticles and a strong correlation of grain size growth with annealing temperature was established. The optical absorption and emission characteristics were estimated through UV-visible and Photoluminescence (PL) spectroscopy. Raman spectroscopy and X-ray Photoelectron Spectroscopy (XPS) confirmed the variation of oxygen vacancies in the synthesized samples' lattice. The photocatalytic activities of all samples were investigated and the highest efficiencies were recorded for the ZFO samples annealed at 500 °C. Under high salinity condition, the organic dye degradation efficiency of the same sample remained the highest among all. The excellent dye degradation abilities in ZFO samples can be attributed to the abundance of oxygen vacancies in the crystal lattice that slow down the recombination rate during the photocatalysis process. Moreover, cytotoxicity tests revealed that all prepared ZFO samples showed insignificant cell structure effects on Picochlorum sp microalgae, as verified by Fourier-transform infrared (FTIR) spectroscopy. On the other hand, no significant changes were detected on the viable cell concentration and Chlorophyll a content. This work presents a systematic way to finely tune the crystal sizes and to modulate oxygen related defects in ZFO through a highly effective annealing approach to signify their potential in industrial wastewater and seawater treatment processes.

A novel Bismuth hydroxide (Bi(OH)3) semiconductor with highly-efficient photocatalytic activity

Herein, a novel Bi(OH)3 photocatalyst was successfully synthesized. Benefiting from the suitable band positions, abundant alkaline groups and oxygen vacancies, the as-prepared semiconductor exhibits efficient activity in both photocatalytic CO2...

Designed polymeric conjugation motivates tunable activation of molecular oxygen in heterogeneous organic photosynthesis

Photocatalytic oxidative organic reactions are important synthetic transformations, and research on reaction selectivity by reactive oxygen species (ROS) is significant. To date, however, there has rarely been any focus on the directed generation of ROSs. Herein, we report the first identification of tunable molecular oxygen activation induced by polymeric conjugation in nonmetallic conjugated microporous polymers (CMP). The conjugation between these can be achieved by the introduction of alkynyl groups. CMP-A with an alkynyl bridge facilitates the intramolecular charge mobility while CMP-D, lacking an alkynyl group enhances the photoexcited carrier build-up on the surface from diffusion. These different processes dominate the directed ROS generation of the superoxide radical (O₂^-) and singlet oxygen (¹O₂), respectively. This theory is substantiated by the different performances of these CMPs in the aerobic oxidation of sulfides and the dehydrogenative coupling of amines, and could provide insight into the rational design of CMPs for various heterogeneous organic photosynthesis.

Oxygen-vacancy abundant alpha bismuth oxide with enhanced cycle stability for high-energy hybrid supercapacitor electrodes

Bi₂O₃ is an outstanding electrode material due to its high theoretical specific capacity. Hence, the synthesis of δ-Bi₂O₃ materials with high oxygen-vacancy contents could improve their electrochemical performances but causes easy conversion to α-Bi₂O₃ with low oxygen-vacancy contents, leading to poor cycling stability and limited practical applications. To overcome these problems, an effective strategy for constructing high oxygen vacancies α-Bi₂O₃ on activated carbon fiber paper (ACFP) is developed in this study. To this end, ACFP/Bi(OH)₃ is first synthesized by the solvothermal method and then converted to ACFP/α-Bi₂O₃ by in situ electrochemical activation. The proposed innovative electrochemical method quickly and easily introduces oxygen vacancies while preserving the three-dimensional structure, thereby promoting the charge transfer and ions diffusion in ACFP/α-Bi₂O₃. Consequently, the specific capacity of ACFP/α-Bi₂O₃ reaches 906C g^-1 at 1 A g^-1, and the capacity retention remains above 70% after 3000 cycles, a value higher than that of δ-Bi₂O₃ (45%). Furthermore, the hybrid supercapacitor device assembled by ACFP/α-Bi₂O₃ delivers a maximum energy density of 114.9 Wh kg^-1 at 900 W kg^-1 and outstanding cycle stability with 73.56 % retention after 5500 cycles. In sum, the proposed ACFP/α-Bi₂O₃ with high performance and good stability looks promising for use as bismuth-based anode materials in supercapacitors and aqueous batteries.

A review on the preparation, microstructure, and photocatalytic performance of Bi2O3 in polymorphs

In recent years, the semiconductor bismuth oxide (Bi₂O₃) has attracted increasing attention as a potential visible-light-driven photocatalyst due to its simple composition, relatively narrow bandgap (2.2-2.8 eV), and high oxidation ability with deep valence band levels. Owing to the symmetry of its unit cell, Bi₂O₃ exists in more than one crystal form and exhibits phase-dependent photocatalytic properties. However, the phase-selective synthesis of Bi₂O₃ is a complex process, and its phase transformation usually occurs in a wide temperature range. Therefore, the development of Bi₂O₃ phases with a controllable microstructure and good photocatalytic properties is a great challenge. Hundreds of articles have been reported on the phase-selective synthesis and photocatalytic performance of Bi₂O₃. However, an interacting and critical review has rarely been reported, and thus it is essential to fill the gap in the literature. In this review, the phase-dependent photocatalytic performance of Bi₂O₃ is presented in detail. The phase-selective synthesis and temperature-dependent phase stability of highly active Bi₂O₃ are explored. The phase junction in Bi₂O₃ is reviewed, and the future perspective with an outlook on contemporary challenges is provided finally.

Ultrahigh Charge Separation Achieved by Selective Growth of Bi4O5I2 Nanoplates on Electron-Accumulating Facets of Bi5O7I Nanobelts

Ultrahigh charge separation was observed in Bi₄O₅I₂/Bi₅O₇I two-dimensional (2D)/one-dimensional (1D) hierarchical structures (HSs) constructed by selective growth of 2D monocrystalline Bi₄O₅I₂ nanoplates on the electron-accumulating (100) facet of 1D monocrystalline Bi₅O₇I nanobelts. In addition to the presence of type-II heterojunction between Bi₄O₅I₂ and Bi₅O₇I elementary entities in 2D/1D HSs, the type-II (100)/(001) surface heterojunction in Bi₅O₇I nanobelt substrates was also confirmed by means of density functional theory (DFT) calculations and selective photoreduction/oxidation deposition experiments. The synergistic effect of two kinds of heterojunctions in Bi₄O₅I₂/Bi₅O₇I 2D/1D HSs endowed them with ultrahigh charge carrier separation and transfer characteristics. In contrast with the control sample (BB40-C) constructed by growing Bi₄O₅I₂ nanoplates on whole four sides of Bi₅O₇I nanobelts, Bi₄O₅I₂/Bi₅O₇I 2D/1D HSs demonstrated significantly enhanced charge transfer between Bi₅O₇I nanobelt substrates and Bi₄O₅I₂ nanoplates, owing to respective electron and hole accumulations on (100) and (001) facets of Bi₅O₇I substrates caused by (100)/(001) surface heterojunction. The enhanced separation behavior was successfully verified by steady/transient-state photoluminescence, electrochemical techniques, and photocatalytic degradation experiments. Based on the above effective charge separation of Bi₄O₅I₂/Bi₅O₇I 2D/1D HSs as well as the routine advantages for 2D/1D HSs, such as the excellent charge transport in monocrystalline elementary entities, much higher specific surface area, and enhanced light absorption by multiple reflections, the optimal BB40 HSs demonstrated ultrahigh photocatalytic performance than the control samples, whose apparent rates for Rhodamine B [or tetracycline hydrochloride (TC)] degradation were 7.1 (2.9 for TC), 10.3 (4.7 for TC), and 2.2 (1.7 for TC) times those of pristine Bi₅O₇I nanobelts, Bi₄O₅I₂ nanoplates, and BB40-C, respectively. It is hoped that this crystal facet selection during the heterostructure construction in this work could provide a new strategy or some enlightenment for the exploration of highly active 2D/1D HSs or other-dimensional heterostructure nanomaterials applied in the fields of photocatalysts, solar cells, sensors, and others.

Identification of deactivation-resistant origin of In(OH)3 for efficient and durable photodegradation of benzene, toluene and their mixtures

Aromatic hydrocarbon is a representative type of VOCs, which causes adverse effects to human health. The degradation stability of aromatic hydrocarbon is of vital importance to commercializing a photocatalyst for its practical application. The most commonly used titanium dioxide photocatalyst (P25) was deactivated rapidly in the photocatalytic VOCs degradation process. In this work, the indium hydroxide (In(OH)₃) photocatalyst was developed, which exhibited not only higher efficient activity but also ultra-stable stability for degradation of benzene, toluene and their mixtures. The origin of the activity difference between two catalysts was investigated by combined experimental and theoretical ways. Based on in situ DRIFTS and GC-MS, it was revealed that benzoic acid and carbonaceous byproducts were specifically formed and accumulated on P25, which were responsible for deactivation of photocatalyst. In contrast, as revealed by both DFT calculations and experimental results, the reaction pathway with byproducts blocking the active sites can be thermodynamically avoided on In(OH)₃. This rendered high durability to In(OH)₃ photocatalyst in degradations of aromatic pollutants. The elucidation of deactivation-resistant effect and reaction mechanism as an ideal photocatalyst for practical usage were provided.

Graphene oxide-grafted plasmonic Au@Ag nanoalloys with improved synergistic effects for promoting hot carrier-driven photocatalysis under visible light irradiation

Plasmonic metallic nanostructure with unique hot carrier-driven photocatalysis has recently emerged as a promising photocatalyst. Herein, we show that the plasmonic photocatalysis can be significantly promoted by supporting bimetallic Au@Ag nanoalloys (NAs) on graphene oxide (GO). The obtained Au₃@Ag₁/GO (molar ratio of Au to Ag∼3:1) with improved synergistic effects provides a remarkable higher visible-light (>400 nm) photocatalytic activity for a complete degradation (99.36%) of tetracycline hydrochloride (TCH) molecules within 70 min, while about 61.74% or 62.38% via monometallic Au/GO or Ag/GO. The optimum photocatalytic performance is attributed to the production of high yield hot carriers on NAs with enhanced localized surface plasmon resonance property and the pronounced photoinduced electron-transfer ability of modified GO support by overgrowth of NAs. These findings enable the optimal Au₃@Ag₁/GO to become an appealing high-performance photocatalyst for promoting diverse photochemical reactions.

Metalloporphyrin immobilized CeO2: in situ generation of active sites and synergistic promotion of photocatalytic water oxidation

CoTCPP transfer photoexcited electrons to CeO₂ by d–f electron coupling. The in situ generation of catalytically active sites: reduction on CeO₂ accompanied with the creation of oxygen vacancies and oxidation on CoTCPP that transforms into CoOOH.

NH2-MIL-125(Ti) with transient metal centers via novel electron transfer routes for enhancing photocatalytic NO removal and H2 evolution

The transient YbII/III center coordinated with –NH2 of NH2-MIL-125(Ti) to form a ligand metal charge transfer (LLCMT) pathway, which promoted the rapid transfer of electrons, thereby enhancing photocatalytic NO removal and hydrogen production.

Design of charge transfer channels: defective TiO2/MoP supported on carbon cloth for solar-light-driven hydrogen generation

We successfully integrated MoP and TiO₂ on flexible carbon cloth (CC) to construct a panel photoreactor with efficient charge transfer channels, where CC acts as an electron collector and guides directional migration of electrons (TiO₂ → MoP → CC).

Dependence of the intrinsic phase structure of Bi2O3 catalysts on photocatalytic CO2 reduction

The combination of time-resolved transient photoluminescence with in-situ Fourier transform infrared spectroscopy has been conducted to investigate the intrinsic phase structure-dependent activity of Bi₂O₃ catalyst for CO₂ reduction.

Bi2O3-Sensitized TiO2 Hollow Photocatalyst Drives the Efficient Removal of Tetracyclines under Visible Light

The complete removal of tetracycline residuals under visible light still is a challenging task because of their robust ring structure. To tackle this issue, we explore a novel Bi₂O₃-sensitized TiO₂ visible-light photocatalyst by combining p-n heterojunction with hollow structure. The hollow TiO₂/Bi₂O₃ photocatalyst manifests excellent photocatalytic performance and recyclability toward the complete degradation (100%) of antibiotics under visible light (λ > 420 nm) because of the synergistic effect of p-n heterojunction and hollow structure, successfully overcoming the challenge of the incomplete removal of antibiotics over almost all of the reported visible-light photocatalysts. Additionally, the effects of inorganic ions, pH value, water matrix, and outdoor light on the degradation of tetracyclines were investigated with many details. Notably, the degradation pathways and mechanism of tetracycline were revealed according to trapping experiments, HPLC-MS, and photoelectrochemical characterizations. Therefore, this work provides a new insight into developing visible-light photocatalysts with excellent photocatalytic performances for the complete removal of other refractory contaminants.

La-doping induced localized excess electrons on (BiO)2CO3 for efficient photocatalytic NO removal and toxic intermediates suppression

Photocatalysis technology has been extensively adopted to abate typical air pollutants. Nevertheless, it is a challenge to develop photocatalysts aiming to simultaneously improve photocatalytic selectivity and efficiency. In this study, to improve the photocatalytic selectivity and the performance of (BiO)₂CO₃ in the oxidation of NO to target products (NO₂^- /NO₃^-), we developed a novel method to construct La-doped (BiO)₂CO₃ (La-BOC) for forming localized excess electrons (Ex) on (BiO)₂CO₃ surface. The results indicate that the Ex could effectively accelerate the activation of reactants and promote charge separation and transfer. Under visible light, the gas molecules could capture the Ex and get activated to produce reactive oxygen species (ROS) with high oxidation ability, which enables complete oxidation of NO to target products instead of producing other toxic by-products. Due to the functionality of the Ex, the photocatalytic selectivity and efficiency of La-BOC have been synchronously improved. Combining experimental and theoretical methods, this work unravels the pathway of charge carriers transportation/transformation and elucidates the photocatalytic NO oxidation mechanism. The present work could provide a novel method to improve photocatalytic selectivity and activity for safe air pollutant abatement.

A Short Review on Biomedical Applications of Nanostructured Bismuth Oxide and Related Nanomaterials

In this review, we reported the main achievements reached by using bismuth oxides and related materials for biological applications. We overviewed the complex chemical behavior of bismuth during the transformation of its compounds to oxide and bismuth oxide phase transitions. Afterward, we summarized the more relevant studies regrouped into three categories based on the use of bismuth species: (i) active drugs, (ii) diagnostic and (iii) theragnostic. We hope to provide a complete overview of the great potential of bismuth oxides in biological environments.

Noble-metal-free cobaloxime coupled with metal-organic frameworks NH2-MIL-125: A novel bifunctional photocatalyst for photocatalytic NO removal and H2 evolution under visible light irradiation

The novel bifunctional NH₂-MIL-125/Co(dmgH)₂ composite catalysts with several different Co(dmgH)₂ contents that can simultaneously achieve photocatalytic NO removal and hydrogen production were first prepared by a simple and convenient method. The corresponding physical and chemical properties of the composite catalysts were characterized by SEM, XRD, ESR, in situ DRIFTS, etc. The characterization results indicated that the noble-metal-free Co(dmgH)₂, which was much cheaper and more available than most noble-metals such as Pt, could be an effective co-catalyst to accelerate the separation of photogenerated electron-hole pairs, further eventually enhancing the photocatalytic efficiency. Under visible-light irradiation for half an hour, the NO removal ratio of NH₂-MIL-125/Co(dmgH)₂ (3 wt%) increased by 22.7 % compared with the pristine NH₂-MIL-125 without Co(dmgH)₂ loading. In addition, it was found that Eosin Y dye-sensitized NH₂-MIL-125/Co(dmgH)₂ (3 wt%) was capable of promoting a hydrogen generation rate of 2195 μmol g^-1 h^-1 under visible light, which was 12.6 times greater than the original NH₂-MIL-125. This strategy was expected as an available way to fabricate noble-metal-free molecular complexes with metal-organic frameworks (MOFs) to enhance the photocatalytic NO removal and hydrogen production performance simultaneously.

Nature-inspired CaCO3 loading TiO2 composites for efficient and durable photocatalytic mineralization of gaseous toluene

The accumulation of intermediates or final products on TiO₂ during photocatalytic volatile organic compounds (VOCs) degradation is typically neglected, despite the fact that it could result in the block of active sites and the deactivation of photocatalysts. Inspired from the natural formation of stalactite (CaCO₃ + H₂O + CO₂ ↔ Ca(HCO₃)₂), we fabricated CaCO₃ loading TiO₂ composites (CCT21) to realize the spontaneously transfer of accumulated final products (CO₂ and H₂O). Efficient and durable performance for gaseous toluene removal has been demonstrated and the cost of photocatalyst is greatly reduced by the comparison of specific activity. The introduction of CaCO₃ induces the interaction between TiO₂ and CaCO₃ to stimulate abundant activated electrons for the improvement on the adsorption and activation of reactants and the transformation of photogenerated carriers, and most importantly, facilitates the transfer of final products to release active sites and thus suppress the deactivation of TiO₂. Furthermore, we develop a facile method to immobilize CCT21 powder on flexible support, which greatly reduces the loss of photocatalysts and correspondingly enables the practical application of TiO₂-based products. Therefore, this work presents a novel nature-inspired strategy to address the challenge of deactivation, and advances the development of photocatalytic technology for environmental remediation.

Enhanced Sulfamerazine Removal via Adsorption–Photocatalysis Using Bi2O3–TiO2/PAC Ternary Nanoparticles

The presence of sulfonamides (SAs) in water has received increasing attention due to the risk to ecosystems. The adsorption and photocatalysis performance for sulfamerazine (SMZ) of Bi2O3–TiO2 supported on powdered activated carbon (Bi2O3–TiO2/PAC) nanoparticles was evaluated. The amount of doped Bi2O3 not only influenced the photocatalytic performance but also impacted the adsorption capacity. The adsorption mass transfer mechanism of Bi2O3–TiO2/PAC was elucidated and is further discussed in combination with the photocatalytic mechanism. It was indicated that Bi2O3–TiO2/PAC(10%–700 °C) performed best, and the SMZ removal by the adsorption–photocatalysis of Bi2O3–TiO2/PAC(10%–700 °C) reached 95.5%. Adsorption onto active sites was a major adsorption step, and external diffusion was assisted. Superoxide radical (●O2−) and hole (h+) were identified as the major reactive oxygen species (ROS) for SMZ removal. Benzene ring fracture, SO2 extrusion and nitrogenated SMZ were proposed as the main pathways for photocatalysis. Meanwhile, alkaline conditions enhanced photocatalytic performance, while contrary effects were observed for adsorption. The adsorption–photocatalysis removal performance for SMZ in lake water was better than that for river water. It can be generalized for the potential application of photocatalysis coupling with adsorption to remove refractory antibiotics in water.