A sustainable on-line CapLC method for quantifying antifouling agents like irgarol-1051 and diuron in water samples: Estimation of the carbon footprint

A Green analytical method for simultaneous determination of dexamethasone sodium phosphate and prednisolone acetate in veterinary formulations using UV spectroscopy and dimension reduction algorithms

Precise determination of veterinary pharmaceutical concentrations represents a critical foundation for delivering safe and efficacious animal healthcare interventions. Two synthetic glucocorticoids - dexamethasone sodium phosphate (DXM) and prednisolone acetate (PRD) - are extensively employed in veterinary medicine due to their potent anti-inflammatory capabilities. Our research presents a novel, cost-effective, and environmentally sustainable analytical methodology that enables simultaneous quantification of DXM and PRD within binary veterinary formulations. The method synergistically combines UV spectroscopy with dimension reduction algorithms (DRAs), representing a significant advancement in pharmaceutical analysis. A comprehensive evaluation of seventeen DRAs was conducted using four distinct performance metrics: mean squared error (MSE), mean absolute error (MAE), median absolute error (MedAE), and coefficient of determination (R2). Among the assessed algorithms, mini-batch sparse principal component analysis demonstrated superior predictive accuracy for this specific analytical challenge. The developed method was validated using the accuracy profile approach, yielding results that confirm its satisfactory accuracy. An ecological impact assessment was conducted using five greenness evaluation tools: the Green Solvent Selection Tool (GSST), National Environmental Methods Index (NEMI), Green Certificate modified Eco-Scale, carbon footprint analysis, and the Modified GAPI (MoGAPI). In addition, whiteness was evaluated with Red-Green-Blue 12 (RGB 12) algorithms. The proposed method showed elevated GSST scores and a greener profile according to NEMI. The calculated carbon footprint was 0.0006 kg CO2 equivalent per sample, with a Green Certificate modified Eco-Scale score of 84, a MoGAPI score of 81, and a whiteness assessment of 90.1 by the RGB12 algorithm. Statistical comparison between the proposed spectrophotometric method and a previously reported HPLC method for pharmaceutical dosage form analysis revealed no statistically significant differences at the 95 % confidence level. This study underscores the innovative combination of UV spectroscopy with dimension reduction algorithms, presenting substantial improvements over traditional UV techniques for drug analysis. This method enhances both the efficiency and accuracy of active ingredient determination in pharmaceutical dosage forms while also supporting environmental sustainability.

Miniaturized liquid chromatography in environmental analysis. A review

The greater and more widespread use of chemicals, either from industry or daily use, is leading to an increase in the discharge of these substances into the environment. Some of these are known to be hazardous to humans and the environment and are regulated, but there is a large and increasing number of substances which pose a potential risk even at low concentration and are not controlled. In this context, new techniques and methodologies are being developed to deal with this concern. Miniaturized liquid chromatography (LC) emerges as a greener and more sensitive alternative to conventional LC. Furthermore, advances in instrument miniaturization have made possible the development of portable LC instrumentation which may become a promising tool for in-situ monitoring. This work reviews the environmental applications of miniaturized LC over the last 15 years and discusses the different instrumentation, including off- and on-line pretreatment techniques, chromatographic conditions, and contributions to the environmental knowledge.

Modern automated microextraction procedures for bioanalytical, environmental, and food analyses

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.

Scaling the Analytical Information Given by Several Types of Colorimetric and Spectroscopic Instruments Including Smartphones: Rules for Their Use and Establishing Figures of Merit of Solid Chemosensors

The analytical information given by different types of instruments was scaled in order to establish suitably the figures of merit of a given methodology based on color measurements. Different lab and portable instruments, including smartphones with and without a miniaturized spectrophotometer accessory, have been tested. In order to obtain broad information and using objective criteria, these instruments have been compared from (1) the analytical point of view, considering mainly the detection limit (limits of detection [LODs]), selectivity, accuracy and intra- and interday precision, size, components, and costs; and (2) the environmental point of view, based on their footprint as kilograms of CO₂. No significant differences in the precision were obtained with RSD (%) values lower than 10% for all of the instruments, but the achieved values of LOD, selectivity, accuracy, and cost were different. Footprints of CO₂ were better for portable instrumentation, especially for smartphones. Three solid chemosensors made of different materials (PDMS, paper, or nylon) have been tested for the determination of ammonia and hydrogen sulfide at different concentration levels (ppb levels). As a result of this study, some rules for selecting the instrument for obtaining the required information have been established. Two apps have been developed for quantitation by smartphones, one for working with RGB values and the other for spectra obtained by the miniaturized spectrophotometer coupled to a smartphone.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Rapid evaluation of ammonium in different rain events minimizing needed volume by a cost-effective and sustainable PDMS supported solid sensor

The presence of ammonium ion in rainwater is due to atmospheric processes which involve its scavenging from gas phase and particulate matter. The fractionated samplings of rainwater can provide information about these processes and their potential sources. However, only a low sample volume may be available, which constrained the analysis in general and more particularly in situ mode. For minimizing this limitation, this work proposes a polydimethylsiloxane (PDMS)-salicylate sensor that produces a color change. The embedding of solid reagents into PDMS was optimized. Good analytical characteristics (analysis time of 10 min, sample volume of 500 μL, limit of detection 0.03 μgmL^-1) were obtained. Furthermore, other features of the method such as carbon footprint, equipment cost, residues, toxicity and safety have to be taken into account to be assessed according to the Green Analytical Chemistry approach. In this sense, the hexagon tool was employed for comparing the proposed sensor with methods based on the same reaction as well as with general methods for the ammonium analysis in water (using luminol, ion selective electrode, Nessler and modified Roth method). The proposed method based on PDMS-salicylate sensor stands out from all the others by its sustainability, particularly, in terms of low carbon footprint, residues and cost. The method was applied to fractionated samplings in a suburban site (Galicia, Northwestern Spain) and a higher contribution of the rainout process was observed. When long-duration rain events were analyzed, a relationship between the sampling time and ammonium concentration could indicate a loss of ammonium ion over time. The research focuses on developing an innovative PDMS-sensor, for monitoring ammonium determination in rainwater under wide conditions (scavenging process).

Estimating Diphenylamine in Gunshot Residues from a New Tool for Identifying both Inorganic and Organic Residues in the Same Sample

A method involving the collection and determination of organic and inorganic gunshot residues on hands using on-line in-tube solid-phase microextraction (IT-SPME) coupled to miniaturized capillary liquid chromatography with diode array detection (CapLC-DAD) and scanning electron microscopy coupled to energy dispersion X-ray (SEM-EDX), respectively, for quantifying both residues was developed. The best extraction efficiency for diphenylamine (DPA) as the main target among organic residues was achieved by using a dry cotton swab followed by vortex-assisted extraction with water, which permits preservation of inorganic residues. Factors such as the nature and length of the IT-SPME extractive phase and volume of the sample processed were investigated and optimized to achieve high sensitivity: 90 cm of TRB-35 (35% diphenyl, 65% polydimethylsiloxane) capillary column and 1.8 mL of the processed sample were selected for the IT-SPME. Satisfactory limit of detection of the method for analysis of DPA deposited on shooters’ hands (0.3 ng) and precision (intra-day relative standard deviation, 9%) were obtained. The utility of the described approach was tested by analyzing several samples of shooters’ hands. Diphenylamine was found in 81% of the samples analyzed. Inorganic gunshot residues analyzed by SEM-EDX were also studied in cotton swab and lift tape kit samplers. Optical microscopy was used to see the inorganic gunshot residues in the cotton swab samplers. The lift tape kits provided lesser sensitivity for DPA than dry cotton swabs—around fourteen times. The possibility of environmental and occupational sources could be eliminated when DPA was found together with inorganic residues. Then, the presence of inorganic and organic residues in a given sample could be used as evidence in judicial proceedings in the forensic field.