Treatment of anaerobic digestate supernatant in microbial fuel cell coupled constructed wetlands: Evaluation of nitrogen removal, electricity generation, and bacterial community response

Comprehensive review of technologies for separate digestate treatment and agricultural valorisation within circular and green economy

Anaerobic digestion (AD) has the potential to catalyse the shift from a linear to a circular economy. However, effective treatment and management of both solid (DSF) and liquid (DLF) digestate fraction treatment and management require adopting sustainable technologies to recover valuable by-products like energy, biofuels, biochar, and nutrients. This study reviews state-of-the-art advanced technologies for DSF and DLF treatment and valorisation, using life cycle assessment (LCA) and techno-economic analysis (TEA) in integrated digestate management (IDM). Key findings highlight these technologies' potential in mitigating environmental impacts from digestate management, but there's a need to improve process efficiency, especially at larger scales. Future research should prioritize cost-effective and eco-friendly IDM technologies. This review emphasizes how LCA and TEA can guide decision-making and promote sustainable agricultural practices. Ultimately, sustainable IDM technologies can boost resource recovery and advance circular economy principles, enhancing the environmental and economic sustainability of AD processes.

Removal of sulfur and nitrogen pollutants in a sediment microbial fuel cell coupled with Vallisneria natans: Efficiency, microbial community structure, and functional genes

The rapid development of the economy has led to an increase in the sulfur and nitrogen load in surface water, which has the potential to cause river eutrophication and the emission of malodorous gases. A lab-scale sediment microbial fuel cell coupled with Vallisneria natans (P-SMFC) was designed for surface water remediation. The enhancement of pollutant removal performance of P-SMFC was evaluated in contrast to the SMFC system without plants (SMFC), the open-circuit control system with plants (C-P), and the open-circuit control system without plants (C-S), while illustrating the mechanisms of the sulfur and nitrogen transformation process. The results demonstrated that the effluent and sediment of P-SMFC had lower concentrations of sulfide compared to other systems. Furthermore, P-SMFC exhibited higher removal efficiency for COD (73.1 ± 8.7%), NH4+-N (80.5 ± 19.8%), and NO3--N (88.5 ± 11.8%) compared to other systems. The closed-circuit conditions and growth of Vallisneria natans create a favorable ecological niche for functional microorganisms involved in power generation, sulfur oxidation, and nitrogen transformation. Additionally, metagenomic analysis revealed that multifunctional bacteria possessing both denitrification and sulfur oxidation genes, such as Thiobacillus, Dechloromonas, and Bacillus, may play simultaneous roles in metabolizing sulfur and nitrogen, thus serving as integral factors in maintaining the performance of P-SMFC. In summary, these findings provide a theoretical reference for the concurrent enhancement of sulfur and nitrogen pollutants removal in P-SMFC and will facilitate its practical application in the remediation of contaminated surface water.

Nanobubble aeration enhanced wastewater treatment and bioenergy generation in constructed wetlands coupled with microbial fuel cells

Artificial aeration is a widely used approach in wastewater treatment to enhance the removal of pollutants, however, traditional aeration techniques have been challenging due to the low oxygen transfer rate (OTR). Nanobubble aeration has emerged as a promising technology that utilise nano-scale bubbles to achieve higher OTRs owing to their large surface area and unique properties such as longevity and reactive oxygen species generation. This study, for the first time, investigated the feasibility of coupling nanobubble technology with constructed wetlands (CWs) for treating livestock wastewater. The results demonstrated that nanobubble-aerated CWs achieved significantly higher removal efficiencies of total organic carbon (TOC) and ammonia (NH4+-N), at 49 % and 65 %, respectively, compared to traditional aeration treatment (36 % and 48 %) and the control group (27 % and 22 %). The enhanced performance of the nanobubble-aerated CWs can be attributed to the nearly three times higher amount of nanobubbles (Ø < 1 μm) generated from the nanobubble pump (3.68 × 108 particles/mL) compared to the normal aeration pump. Moreover, the microbial fuel cells (MFCs) embedded in the nanobubble-aerated CWs harvested 5.5 times higher electricity energy (29 mW/m2) compared to the other groups. The results suggested that nanobubble technology has the potential to trigger the innovation of CWs by enhancing their capacity for water treatment and energy recovery. Further research needs are proposed to optimise the generation of nanobubbles, allowing them to be effectively coupled with different technologies for engineering implementation.

The race between classical microbial fuel cells, sediment-microbial fuel cells, plant-microbial fuel cells, and constructed wetlands-microbial fuel cells: Applications and technology readiness level

Microbial fuel cell (MFC) is an interesting technology capable of converting the chemical energy stored in organics to electricity. It has raised high hopes among researchers and end users as the world continues to face climate change, water, energy, and land crisis. This review aims to discuss the journey of continuously progressing MFC technology from the lab to the field so far. It evaluates the historical development of MFC, and the emergence of different variants of MFC or MFC-associated other technologies such as sediment-microbial fuel cell (S-MFC), plant-microbial fuel cell (P-MFC), and integrated constructed wetlands-microbial fuel cell (CW-MFC). This review has assessed primary applications and challenges to overcome existing limitations for commercialization of these technologies. In addition, it further illustrates the design and potential applications of S-MFC, P-MFC, and CW-MFC. Lastly, the maturity and readiness of MFC, S-MFC, P-MFC, and CW-MFC for real-world implementation were assessed by multicriteria-based assessment. Wastewater treatment efficiency, bioelectricity generation efficiency, energy demand, cost investment, and scale-up potential were mainly considered as key criteria. Other sustainability criteria, such as life cycle and environmental impact assessments were also evaluated.

Long-term operation of cathode-enhanced ecological floating bed coupled with microbial electrochemical system for urban surface water remediation: From lab-scale research to engineering application

Ecological floating bed coupled with microbial electrochemical system (ECOFB-MES) has great application potential in micro-polluted water remediation yet limited by low electron transfer efficiency on the microbial/electrode interface. Here, an innovative cathode-enhanced EOCFB-MES was constructed with nano-Fe₃O₄ modification and applied for in-situ remediation both at lab scale (6 L, 62-day operation) and demonstration scale (2300 m², 1-year operation). The cathode-enhanced ECOFB-MES exhibited superior removal in TOC (81.43 ± 2.05%), TN (85.12% ± 1.46%) and TP (59.80 ± 2.27%), much better than those of original ECOFB-MES and anode-enhanced ECOFB-MES in the laboratory test. Meanwhile, cathode-enhanced ECOFB-MES boosted current output by 33% than that of original ECOFB-MES, which made a great contribution to the improvement of ectopic electronic compensation for pollutant decontamination. Notably, cathode-enhanced ECOFB-MES presented high efficiency, stability and durability in the demonstration test, and fulfilled the average concentration of COD (9.5 ± 2.81 mg/L), TN (1.00 ± 0.21 mg/L) and TP (0.10 ± 0.04 mg/L) of effluent water to meet the Grade III (GB 3838-2002) with stable operation stage. Based on the KOSIM calculation, the removal loads of cathode-enhanced ECOFB-MES in carbon, nitrogen and phosphorus could reach 37.14 g COD/(d·m²), 2.62 g TN/(d·m²) and 0.55 g TP/(d·m²), respectively. According to the analysis of microbial communities and functional genes, the cathode modified by Fe₃O₄ made a sensible enrichment in electroactive bacteria (EAB) and nitrogen-converting bacteria (NCB) as well as facilitated the functional genes expression in electron transfer and nitrogen metabolism, resulting in the synergistic removal of carbon in sediment and nitrite in water. This study provided a brandnew technique reference for in-situ remediation of surface water in practical application.

Comparative study on the treatment of swine wastewater by VFCW-MFC and VFCW: Pollutants removal, electricity generation, microorganism community

Swine wastewater, characterized by high organic and nutrient content, poses significant environmental challenges. This study aims to compare the effectiveness of two treatment technologies, namely Vertical Flow Constructed Wetland-Microbial Fuel Cell (VFCW-MFC) and Vertical Flow Constructed Wetland (VFCW), in terms of pollutant removal, electricity generation, and microorganism community dynamics. The results showed that the average removal efficiencies of chemical oxygen demand (COD), ammonia nitrogen, total nitrogen (TN), total phosphorus (TP) and sulfadiazine antibiotics (SDZ) by VFCW-MFC were as high as 94.15%, 95.01%, 42.24%, 97.16% and 82.88%, respectively, which were all higher than that by VFCW. Both VFCW-MFC and VFCW have good tolerance to SDZ. In addition, VFCW-MFC has excellent electrical performance, with output voltage, power density, coulombic efficiency and net energy recovery up to 443.59 mV, 51.2 mW/m³, 52.91% and 2.04 W/(g·s), respectively, during stable operation. Moreover, the microbial community diversity of VFCW-MFC was more abundant, and the species abundance distribution in cathode region was more rich and even than in anode region. At phylum level, the dominant microorganisms in VFCW-MFC included Proteobacteria, Bacteroidota, Firmicutes and Actinobacteriota, which showed good degradation effect on SDZ. Proteobacteria and Firmicutes are also involved in electricity production. Chloroflexi, Proteobacteria and Bacteroidota play a major role in nitrogen reduction.

Performance of vertical up-flow-constructed wetlands integrating with microbial fuel cell (VFCW-MFC) treating ammonium in domestic wastewater

Vertical up-flow-constructed wetlands integrating with microbial fuel cell (VFCW-MFC) were evaluated for NH4+-N removal and bioelectricity recovery. The experiments were carried out in lab-scale VFCW-MFC microcosms treating synthetic domestic wastewater under different operational conditions of pH, hydraulic retention time, and mass loading rate. Effects of wild ornamental grass (Cenchrus setaceus) on treatment performance and voltage output were investigated simultaneously. Experiments demonstrated that the neutral pH of influents favoured NH4+-N removal and power generation. Extended retention time improved treatment capacity and power output but likely depended on the substrate availability. COD removal and power output increased, while NH4+-N removal decreased with increasing mass loading rates. At the loading rate of 88.31 mg COD/L.day, planted VFCW-MFCs exhibited better NH4+-N treatment performance (36.9%) and higher voltage output (132%-143%) than unplanted systems. Plants did not affect the COD removal efficiency of VFCW-MFCs (>95%). Power density was in the range of 1.26-1.59 mW/m² in planted microcosms with a maximum CE of 13.6%. The anode layer accounted for a major proportion of NH4+-N removal in VFCW-MFCs. This study implies that NH4+-N in domestic wastewaters with relatively high COD:N ratios can be treated effectively in up-flow CW-MFCs via anaerobic processes, including anammox and heterotrophic denitrifying processes. The mass loading rate could be a critical parameter to balance different microbial processes, thus, coincidently determining the potential of power recovery from wastewaters.

A Targeted Review of Current Progress, Challenges and Future Perspective of g-C3 N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃ N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃ N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃ N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃ N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃ N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃ N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.

Recent Advancement in Rational Design Modulation of MXene: A Voyage from Environmental Remediation to Energy Conversion and Storage

Use of MXenes (Ti₃ C₂ T_x ), which belongs to the family of two-dimensional transition metal nitrides and carbides by encompassing unique combination of metallic conductivity and hydrophilicity, is receiving tremendous attention, since its discovery as energy material in 2011. Owing to its precursor selective chemical etching, and unique intrinsic characteristics, the MXene surface properties are further classified into highly chemically active compound, which further produced different surface functional groups i. e., oxygen, fluorine or hydroxyl groups. However, the role of surface functional groups doesn't not only have a significant impact onto its electrochemical and hydrophilic characteristics (i. e., ion adsorption/diffusion), but also imparting a noteworthy effect onto its conductivity, work function, electronic structure and properties. Henceforth, such kind of inherent chemical nature, robust electrochemistry and high hydrophilicity ultimately increasing the MXene application as a most propitious material for overall environment-remediation, electrocatalytic sensors, energy conversion and storage application. Moreover, it is well documented that the role of MXenes in all kinds of research fields is still on a progress stage for their further improvement, which is not sufficiently summarized in literature till now. The present review article is intended to critically discuss the different chemical aptitudes and the diversity of MXenes and its derivates (i. e., hybrid composites) in all aforesaid application with special emphasis onto the improvement of its surface characteristics for the multidimensional application. However, this review article is anticipated to endorse MXenes and its derivates hybrid configuration, which is discussed in detail for emerging environmental decontamination, electrochemical use, and pollutant detection via electrocatalytic sensors, photocatalysis, along with membrane distillation and the adsorption application. Finally, it is expected, that this review article will open up new window for the effective use of MXene in a broad range of environmental remediation, energy conversion and storage application as a novel, robust, multidimensional and more proficient materials.

Recent advancement in conjugated polymers based photocatalytic technology for air pollutants abatement: Cases of CO2, NOx, and VOCs

According to World Health Organization (WHO) survey, air pollution has become the major reason of several fatal diseases, which had led to the death of 7 million peoples around the globe. The 9 people out of 10 breathe air, which exceeds WHO recommendations. Several strategies are in practice to reduce the emission of pollutants into the air, and also strict industrial, scientific, and health recommendations to use sustainable green technologies to reduce the emission of contaminants into the air. Photocatalysis technology recently has been raised as a green technology to be in practice towards the removal of air pollutants. The scientific community has passed a long pathway to develop such technology from the material, and reactor points of view. Many classes of photoactive materials have been suggested to achieve such a target. In this context, the contribution of conjugated polymers (CPs), and their modification with some common inorganic semiconductors as novel photocatalysts, has never been addressed in literature till now for said application, and is critically evaluated in this review. As we know that CPs have unique characteristics compared to inorganic semiconductors, because of their conductivity, excellent light response, good sorption ability, better redox charge generation, and separation along with a delocalized π-electrons system. The advances in photocatalytic removal/reduction of three primary air-polluting compounds such as CO₂, NO_X, and VOCs using CPs based photocatalysts are discussed in detail. Furthermore, the synergetic effects, obtained in CPs after combining with inorganic semiconductors are also comprehensively summarized in this review. However, such a combined system, on to better charges generation and separation, may make the Adsorb & Shuttle process into action, wherein, CPs may play the sorbing area. And, we hope that, the critical discussion on the further enhancement of photoactivity and future recommendations will open the doors for up-to-date technology transfer in modern research.

A new cutting-edge review on the bioremediation of anaerobic digestate for environmental applications and cleaner bioenergy

Circular agriculture and economy systems have recently emerged around the world. It is a long-term environmental strategy that promotes economic growth and food security while reducing negative environmental consequences. Anaerobic digestion (AD) process has a high contribution and effective biodegradation route for bio-wastes valorization and reducing greenhouse gases (GHGs) emissions. However, the remaining massive digestate by-product contains non-fermented organic fractions, macro and/or micro-nutrients, heavy metals, and metalloids. Direct application of digestate in agriculture negatively affected the properties of the soil due to the high load of nutrients as well as the residuals of GHGs are emitted to the environment. Recycling and valorizing of anaerobic digestate is the main challenge for the sustainable biogas industry and nutrients recovery. To date, there is no global standard process for the safe digestate handling. This review described the biochemical composition and separation processes of anaerobic digestate. Further, advanced physical, chemical, and biological remediation's of the diverse digestate are comprehensively discussed. Moreover, recycling technologies such as phyco-remediation, bio-floc, and entomoremediation were reviewed as promising solutions to enhance energy and nutrient recovery, making the AD technology more sustainable with additional profits. Finally, this review gives an in-depth discussion of current biorefinery technologies, key roles of process parameters, and identifies challenges of nutrient recovery from digestate and prospects for future studies at large scale.

Remediation of algal cells, PO43-, and NO3- from eutrophic wastewater using Echinodorus cordifolius in zigzag-horizontal subsurface constructed wetlands

The pollutant removal efficiency of traditionally constructed wetlands (CWs) is often limited due to low interaction time between wastewater and the CW matrix (plants, microbes, and substrates). A zigzag-horizontal subsurface flow constructed wetland with effluent recirculation (Z-HSSF + ER) was developed to improve removal efficiency. Echinodorus cordifolius plants were used in this study. The efficiency of the systems was evaluated using eutrophic wastewater. The results showed that the developed systems exhibited the high removal efficiency of algal cells, PO₄^3-, and NO₃^- (97%, 70%, and 100%, respectively), within 5 days. Algal cells were removed by the interception mechanism of gravel and zigzag baffles. PO₄^3- and NO₃^- in the eutrophic wastewater was mainly removed by E. cordifolius including rhizobacteria and other microorganisms. The long flow pathway created by the installation of zigzag baffles combined with effluent recirculation provides high dissolved oxygen (DO) in the systems and increases the interaction time between wastewater and the CW matrix, thus improving the pollutant removal efficiency of CWs.

Effectiveness of constructed wetland integrated with microbial fuel cell for domestic wastewater treatment and to facilitate power generation

Constructed wetlands (CWs) have gained a lot of attention for wastewater treatment due to robustness and natural pollutant mitigation characteristics. This widely acknowledged technology possesses enough merits to derive direct electricity in collaboration with microbial fuel cell (MFC), thus taking advantage of microbial metabolic activities in the anoxic zone of CWs. In the present study, two identical lab-scale CWs were selected, each having 56 L capacity. One of the CW integrated with MFC (CW-MFC) contains two pairs of electrodes, i.e., carbon felt and graphite plate. The first pair of CW-MFC consists of a carbon felt cathode with a graphite plate anode, and the second pair contains a graphite plate cathode with a carbon felt anode. The other CW was not integrated with MFC and operated as a traditional CW for evaluating the performance. CW-MFC and CW were operated in continuous up-flow mode with a hydraulic retention time of 3 days and at different organic loading rates (OLRs) per unit surface area, such as 1.45 g m^-2 day^-1 (OLR-1), 2.43 g m^-2 day^-1 (OLR-2), and 7.25 g m^-2 day^-1 (OLR-3). The CW-MFC was able to reduce the organic matter, phosphate, and total nitrogen by 92%, 93%, and 70%, respectively, at OLR of 1.45 g m^-2 day^-1, which was found to be higher than that obtained in conventional CW. With increase in electrochemical redox activities, the second pair of electrodes made way for 3 times higher power density of 16.33 mW m^-2 as compared to the first pair of electrodes in CW-MFC (5.35 mW m^-2), asserting carbon felt as a good anode material to be used in CW-MFC. The CW-MFC with carbon felt as an anode material is proposed to improve the electro-kinetic activities for scalable applications to achieve efficient domestic wastewater treatment and electricity production.

Bioconversion of wastewater to single cell protein by methanotrophic bacteria

Single cell protein (SCP) provides an alternative protein source to partially replace the conventional agricultural resources and support the increased nutritional needs. Inexpensive feeding source is one of the key limiting factors for the expansion of SCP production. The present study examined the valorization of biogas derived from the anaerobic digestion (AD) of sewage sludge and the discarded effluent as nutrients source to produce SCP using methanotrophic bacteria. Results indicated that the mixed methanotrophic culture can grow well on the pasteurized AD supernatant and biogas, succeeding in promising dry weight (DW) yield (0.66 ± 0.01 g-DW/g-CH₄ and 11.54 ± 0.12 g-DW/g-NH₄⁺). Methylomonas (56.26%) and Methylophilus (24.60%) spp. were the two main representatives of the mixed culture. The produced dried biomass had a protein content higher than 41% w/w, including essential amino acids like histidine, valine, phenylalanine, isoleucine, leucine, threonine and lysine. The cultivated SCP shows potential utilization as protein source for animal diets.

Operation mechanism of constructed wetland-microbial fuel cells for wastewater treatment and electricity generation: A review

Constructed wetland-microbial fuel cells (CWL-MFCs) are eco-friendly and sustainable technology, simultaneously implementing contaminant removal and electricity production. According to intensive research over the last five years, this review on the operation mechanism was conducted for in-depth understanding and application guidance of CWL-MFCs. The electrochemical mechanism based on anodic oxidation and cathodic reduction is the core for improved treatment in CWL-MFCs compared to CWLs. As the dominant bacterial community, the abundance and gene-expression patterns of electro-active bacteria responds to electrode potentials and contaminant loadings, further affecting operational efficiency of CWL-MFCs. Plants benefit COD and N removal by supplying oxygen for aerobic degradation and rhizosphere secretions for microorganisms. Multi-electrode configuration, carbon-based electrodes and rich porous substrates affect transfer resistance and bacterial communities. The possibilities of CWL-MFCs targeting at recalcitrant contaminants like flame retardants and interchain interactions among effect components need systematic research.

Nutrient Removal Process and Cathodic Microbial Community Composition in Integrated Vertical-Flow Constructed Wetland - Microbial Fuel Cells Filled With Different Substrates

An integrated vertical-flow constructed wetland-microbial fuel cell system (CW-MFC), consisting of an up-flow chamber and a down-flow chamber, was constructed to treat synthetic sewage wastewater. The performance of CW-MFCs filled with different substrates [i.e., ceramsite (CM-A), quartz (CM-B), and zeolite (CM-C) granules] under various hydraulic retention times (HRTs, 7.6, 4.0, and 2.8 d) was evaluated. Efficient and stable nitrogen (N) and phosphorus (P) removals were observed in CM-A under different HRTs, while the voltage outputs of the CW-MFCs was greatly reduced as the HRTs decreased. With an HRT of 2.8 d, the ammonium (NH4 +-N) and orthophosphate (PO4 3--P) removal efficiencies in CM-A were as high as 93.8 and 99.6%, respectively. Bacterial community analysis indicates that the N removal in the cathode area of CM-A could potentially benefit from the appearance of nitrifying bacteria (e.g., Nitrosomonas and Nitrospira) and relatively high abundance of denitrifiers involved in simultaneous nitrification and denitrification (e.g., Hydrogenophaga, Zoogloea, and Dechloromonas) and denitrifying sulfide removal (e.g., Thauera). Additionally, the difference in N removal efficiency among the CW-MFCs could be partly explained by higher iron (Fe) content in milled ceramsite granules and higher abundance of denitrifiers with nitrate reduction and ferrous ions oxidation capabilities in CM-A compared with that in CM-B and CM-C. Efficient PO4 3--P removal in CM-A was mainly ascribed to substrate adsorption and denitrifying phosphorus (P) removal. Concerning the substantial purification performance in CM-A, ceramsite granules could be used to improve the nutrient removal efficiency in integrated vertical-flow CW-MFC.

Progress in Nitrogen Removal in Bioelectrochemical Systems

Nitrogenous compounds attract great attention because of their environmental impact and harmfulness to the health of human beings. Various biological technologies have been developed to reduce the environmental risks of nitrogenous pollutants. Bioelectrochemical systems (BESs) are considered to be a novel biological technology for removing nitrogenous contaminants by virtue of their advantages, such as low energy requirement and capacity for treating wastewaters with a low C/N ratio. Therefore, increasing attention has been given to carry out biological processes related to nitrogen removal with the aid of cathodic biofilms in BESs. Prior studies have evaluated the feasibility of conventional biological processes including nitrification, denitrification, and anaerobic ammonia oxidation (anammox), separately or combined together, to remove nitrogenous compounds with the help of BESs. The present review summarizes the progress of developments in BESs in terms of the biological process, cathodic biofilm, and affecting factors for efficient nitrogen removal.

Response Characteristics of Nitrifying Bacteria and Archaea Community Involved in Nitrogen Removal and Bioelectricity Generation in Integrated Tidal Flow Constructed Wetland-Microbial Fuel Cell

This study explores nitrogen removal performance, bioelectricity generation, and the response of microbial community in two novel tidal flow constructed wetland-microbial fuel cells (TFCW-MFCs) when treating synthetic wastewater under two different chemical oxygen demand/total nitrogen (COD/TN, or simplified as C/N) ratios (10:1 and 5:1). The results showed that they achieved high and stable COD, NH₄ ⁺-N, and TN removal efficiencies. Besides, TN removal rate of TFCW-MFC was increased by 5-10% compared with that of traditional CW-MFC. Molecular biological analysis revealed that during the stabilization period, a low C/N ratio remarkably promoted diversities of ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) in the cathode layer, whereas a high one enhanced the richness of nitrite-oxidizing bacteria (NOB) in each medium; the dominant genera in AOA, AOB, and NOB were Candidatus Nitrosotenuis, Nitrosomonas, and Nitrobacter. Moreover, a high C/N ratio facilitated the growth of Nitrosomonas, while it inhibited the growth of Candidatus Nitrosotenuis. The distribution of microbial community structures in NOB was separated by space rather than time or C/N ratio, except for Nitrobacter. This is caused by the differences of pH, dissolved oxygen (DO), and nitrogen concentration. The response of microbial community characteristics to nitrogen transformations and bioelectricity generation demonstrated that TN concentration is significantly negatively correlated with AOA-shannon, AOA-chao, 16S rRNA V4-V5-shannon, and 16S rRNA V4-V5-chao, particularly due to the crucial functions of Nitrosopumilus, Planctomyces, and Aquicella. Additionally, voltage output was primarily influenced by microorganisms in the genera of Nitrosopumilus, Nitrosospira, Altererythrobacter, Gemmata, and Aquicella. This study not only presents an applicable tool to treat high nitrogen-containing wastewater, but also provides a theoretical basis for the use of TFCW-MFC and the regulation of microbial community in nitrogen removal and electricity production.

Dynamic variation in nitrogen removal of constructed wetlands modified by biochar for treating secondary livestock effluent under varying oxygen supplying conditions

Vertical flow constructed wetlands are facing the problem of low removal efficiency when treating high-load wastewater. This study explored the effect of oxygen supplement (1.2, 1.0, 0.8 L min^-1 for 6 h; 1.0 L min^-1 for 4 h and 2 h) on enhancing nitrogen removal in vertical flow constructed wetlands modified by adding biochar for treating secondary livestock effluent. The results indicated that biochar addition could enhance contaminant removal due to its adsorption of contaminants under the condition of no aeration. Additionally, the aeration addition of 1.0 L min^-1 for 2 h per day in biochar-based constructed wetlands achieved the high efficiencies for chemical oxygen demand (95%) and total nitrogen (73%) removal. However, total nitrogen removal efficiency in biochar-based constructed wetlands declined under excessive dissolved oxygen conditions which might restrain the denitrification process. Average nitrous oxide emission fluxes in biochar-based constructed wetlands (575-1877 μg m^-2 h^-1) were lower than those in non-biochar constructed wetlands (745-2298 μg m^-2 h^-1). In addition, the variation of N₂O emission under different aeration conditions was similar with the maximum value at the aeration condition of 1.2 L min^-1 for 6 h d^-1. These results could be useful for improving the sustainable design and operation of constructed wetlands for high-load wastewater treatments.

Biological nutrient removal and recovery from solid and liquid livestock manure: Recent advance and perspective

Rapid development of livestock industry produces large amount of livestock manure rich in nutrients, organic matters, antibiotics, and heavy metals, thus imposes great harms to human and environment, if the manure is not suitably treated. Biological removal and recovery of nutrients from manure as agriculture fertilizer is attractive due to low cost and simple operation. This review offers an overview of recent development in biological nutrient removal and recovery from livestock manure. Livestock manure is divided into solid manure and liquid manure. Composting and anaerobic digestion of solid manure are fully discussed and important parameters are investigated. Then various processes of nutrient removal and recovery from liquid manure are summarized. Brief economic sustainability and eco-environmental effects are carried out. Finally, current challenges and future prospects in this field are analyzed.

Assessing the factors influencing the performance of constructed wetland-microbial fuel cell integration

Constructed wetland coupled microbial fuel cell (CW-MFC) systems integrate an aerobic zone and an anaerobic zone to treat wastewater and to generate bioenergy. The concept evolves based on the principles of constructed wetlands and plant MFC (one form of photosynthetic MFC) technologies, of which all contain plants. CW-MFC have been used in a wide range of application since their introduction in 2012 for wastewater treatment and electricity generation. However, there are few reports on the individual components and their performance on CW-MFC efficiency. The performance and efficiency of this technology are significantly influenced by several factors such as the organic load and sewage composition, hydraulic retention time, cathode dissolved oxygen, electrode materials and wetland plants. This paper reviews the influence of the macrophyte (wetland plants) component, substrate material, microorganisms, electrode material and hydraulic retention time (HRT) on CW-MFC performance in wastewater treatment and electricity generation. The study assesses the relationship between these parameters and discusses progress in the development of this integrated system to date.

Increasing of electricity production from Echinodosus cordifolius-microbial fuel cell by inoculating Bacillus thuringiensis

The wetland-microbial fuel cell (MFC) is a novel electricity generating technology. However, these systems can generate only limited electric energy. Since nitrification is a key mechanism driving electrical power in wetland-MFC systems, an effective nitrifying bacteria, Bacillus thuringiensis, was used to inoculate a wetland-MFC to enhance the maximum power density of the system. B. thuringiensis effectively enhanced the maximum power density, producing about 20-35 mW m^-2 of maximum power density. Interestingly, over the first 120 days of operation, the wetland-MFC system with only B. thuringiensis generated more power than a system containing an Echinodosus cordifolius plant in addition to B. thuringiensis, because E. cordifolius can took up nitrate (NO₃^-) and phosphate (PO₄^3-) in system's solution. Nitrate and PO₄^3- act as important anions driving electric current in the system. After 120 days of operation though, the combined E. cordifolius and B. thuringiensis system maintained 20-35 mW m^-2 maximum power density and the maximum power density of the system only inoculated with B. thuringiensis decreased continuously. Gene (16S rRNA) copy numbers for B. thuringiensis showed that when E. cordifolius was presented, the bacterium was able to continue growing after 120 days of operation. B. thuringiensis did not grow as well after 120 days in the system that did not contain a plant. This study presents a strategy for enhancing electric power output from a wetland-MFC by inoculating the system with B. thuringiensis and maintaining the bacterium's population with the support of an E. cordifolius plant. The result clearly show that B. thuringiensis can enhance electric power generation in the presence of the plant and the system can self-sustain for longer than 180 days of operation while producing 20-35 mW m^-2 maximum power density.

Significance of water level in affecting cathode potential in electro-wetland

Bioelectricity production is always restricted by the limited cathode performance in integrated constructed wetland-microbial fuel cells (termed as electro-wetlands). Generally, the cathodes are located at the air-water interface for an oxygen-rich environment. However, its performance may still be unsatisfactory, resulting in a low bioelectricity production. After a long term trial in previous study, we recognised that the position of the electron collector in the cathode significantly affected the bioelectricity production in electro-wetlands. In this study, two cathode configurations of electron collector at the air-water interface and above water level for 1.5 cm, respectively, were evaluated for cell voltage and power density in a vertical up-flow electro-wetland. Results showed that maximum total power density was increased from 31 mW/m² to 165 mW/m² when the cathode electron collector was changed from the air-water interface to 1.5 cm above water level, proving that cathode configuration is the key factor in bioelectricity production.

The intensified constructed wetlands are promising for treatment of ammonia stripped effluent: Nitrogen transformations and removal pathways

This study investigated the treatment performance and nitrogen removal mechanism of highly alkaline ammonia-stripped digestate effluent in horizontal subsurface flow constructed wetlands (CWs). A promising nitrogen removal performance (up to 91%) was observed in CWs coupled with intensified configurations, i.e., aeration and effluent recirculation. The results clearly supported that the higher aeration ratio and presence of effluent recirculation are important to improve the alkalinity and pollutant removal in CWs. The influent pH (>10) was significantly decreased to 8.2-8.8 under the volumetric hydraulic loading rates of 0.105 and 0.21 d^-1 in the CWs. Simultaneously, up to 91% of NH₄⁺-N removal was achieved under the operation of a higher aeration ratio and effluent recirculation. Biological nitrogen transformations accounted for 94% of the consumption of alkalinity in the CWs. The significant enrichment of δ¹⁵N-NH₄⁺ in the effluent (47-58‰) strongly supports the occurrence of microbial transformations for NH₄⁺-N removal. However, relatively lower enrichment factors of δ¹⁵N-NH₄⁺ (-1.8‰ to -11.6‰) compared to the values reported in previous studies reflected the inhibition effect of the high pH alkaline environment on nitrifiers in these CWs.

Treatment of anaerobic digested effluent in biochar-packed vertical flow constructed wetland columns: Role of media and tidal operation

Three types of vertical flow constructed wetland columns (VFCWs), packed with corn cob biochar (CB-CW), wood biochar (WB-CW) and gravel (G-CW) under tidal flow operations, were comparatively evaluated to investigate anaerobic digested effluent treatment performance and mechanisms. It was demonstrated that CB-CW and WB-CW provide significantly higher removal efficiencies for organic matter (>59%), NH₄⁺-N (>76%), TN (>37%) and phosphorus (>71%), compared with G-CW (22%-49%). The higher pollutants removal ability of biochar-packed VFCWs was mainly attribute to the higher adsorption ability and microbial cultivation in the porous biochar media. Moreover, increasing the flooded/drained ratio from 4/8h to 8/4h of the tidal operation further improved around 10% of the removal of both organics and NH₄⁺-N for biochar-packed VFCWs. The phosphorus removal was dependent on the media adsorption capacities through the whole experiment. However, the NH₄⁺-N biodegradation by microbial communities was demonstrated to become the dominant removal mechanism in the long term treatment, which compensated the decreased adsorption capacities of the media. The study supported that the use of biochar would increase the treatment performance and elongate the lifespan of CWs under tidal operation.