pH-dependent KOW provides new insights in understanding the adsorption mechanism of ionizable organic chemicals on carbonaceous materials

Effects of charge-assisted hydrogen bond on sorption and co-sorption of pharmaceutical contaminants on carbonaceous materials: Spectroscopic and theoretical studies

Charge-assisted hydrogen bond (CAHB) is a key mechanism that affects the environmental behavior of pharmaceutical pollutants (PCs). However, the strength and stability of various CAHBs, and their effects on the co-sorption behavior of PCs are still unclear. Herein, DFT calculation with different solvent models including two implicit solvent model (PCM and SMD), and one explicit solvent model (ESM) were applied in this study, to investigate the effects of different CAHBs on the sorption and co-sorption behavior of four PCs (e.g., clofibric acid, p-aminobenzoic acid, acetaminophen, and sulfamerazine) on three model carbonaceous materials. First, the appearance of new peaks in the very low field of 1H NMR, and the blue shift of OH and NH2 peaks in FTIR indicated that CAHBs were indeed formed between PCs and carbonaceous materials. Next, according to the principal component analysis and correlation analysis of parameters (e.g., ΔEads, bond length, bond angle, Egap, and ΔG) of these CAHBs calculated by the DFT with different solvent models, the results showed that SMD is the optimal model for calculating the strength and stability of CAHBs by DFT, and the strength and stability of CAHBs formed between PCs and carbonaceous materials in this study were in the order of homonuclear [O⋯H⋯O]- CAHB > heteronuclear [O⋯HN]-/[N⋯HO]+ type of CAHB > homonuclear [N⋯H⋯N]+. Also, the co-sorption behavior of different PCs co-existing in binary systems further confirmed that, all above types of CAHBs formed between PCs and carbonaceous materials can produce obvious competition effect on the co-existing PCs that only OHB formed between them. This study not only reveals the environmental behavior of co-existing PCs, but also provides a theoretical basis for the design of obligate sorption materials for PCs in the natural environment.

Water-soluble organic carbon (WSOC) from vegetation fire and its differences from WSOC in natural media: Spectral comparison and self-organizing maps (SOM) classification

Vegetation fire frequently occurs globally and produces two types of water-soluble organic carbon (WSOC) including black carbon WSOC (BC-WSOC) and smoke-WSOC, they will eventually enter the surface environment (soil and water) and participate in the eco-environmental processes on the earth surface. Exploring the unique features of BC-WSOC and smoke-WSOC is critical and fundamental for understanding their eco-environmental effects. Presently, their differences from the natural WSOC of soil and water remain unknown. This study produced various BC-WSOC and smoke-WSOC by simulating vegetation fire and used UV-vis, fluorescent EEM-PARAFAC, and fluorescent EEM-SOM to analyze their different features from natural WSOC of soil and water. The results showed that the maximum yield of smoke-WSOC reached about 6600 folds that of BC-WSOC after a vegetation fire event. The increasing burning temperature decreased the yield, molecular weight, polarity, and protein-like matters abundance of BC-WSOC and increased the aromaticity of BC-WSOC, but presented a negligible effect on the features of smoke-WSOC. Furthermore, compared with natural WSOC, BC-WSOC had a greater aromaticity, smaller molecular weight, and more humic-like matters, while smoke-WSOC had a lower aromaticity, smaller molecular size, higher polarity, and more protein-like matters. EEM-SOM analysis indicated that the ratio between the fluorescence intensity at Ex/Em: 275 nm/320 nm and the sum fluorescence intensity at Ex/Em: 275 nm/412 nm and Ex/Em: 310 nm/420 nm could effectively differentiate WSOC of different sources, following the order of smoke-WSOC (0.64-11.38) > water-WSOC and soil-WSOC (0.06-0.76) > BC-WSOC (0.0016-0.04). Hence, BC-WSOC and smoke-WSOC possibly directly alter the quantity, properties, and organic compositions of WSOC in soil and water. Owing to smoke-WSOC having far greater yield and bigger difference from natural WSOC than BC-WSOC, the eco-environmental effect of smoke-WSOC deposition should be given more attention after a vegetation fire.

Various hydrogen bonds make different fates of pharmaceutical contaminants on oxygen-rich nanomaterials

Various hydrogen bonds, especially charge-assisted hydrogen bond (CAHB), is considered as one of vital mechanisms affecting the environmental behavior and risk of pharmaceutical contaminants (PCs). Herein the sorption/desorption of three PCs including clofibric acid (CA), acetaminophen (ACT), and sulfamerazine (SMZ) on three Oxygen-rich (O-rich) nanoparticles (nano-silica: Nano-SiO₂, nano-alumina: Nano-Al₂O₃, and oxidized carbon nanotubes: O-CNTs) were investigated to explore the effect of various hydrogen bonds with different strengths on environmental behaviors of PCs. The results indicated that although solvent-assisted CAHB, solvent-uninvolved CAHB, and ordinary hydrogen bond (OHB) all played a crucial role in sorption of PCs on three O-rich nanomaterials, they showed significantly different effects on the desorption behaviors of PCs from three sorbents. Compared with OHB (hysteresis index ≤0.0766), the stronger CAHB (hysteresis index ≥0.1981) between PCs and O-rich nanoparticles having comparable pK_a with PCs, caused obvious desorption hysteresis of PCs, resulting in their better immobilization on O-rich nanomaterials. The FTIR characterization found that both solvent-assisted and solvent-uninvolved CAHB formation resulted in a new characteristic peak appeared in the high frequency (3660 cm^-1 for Nano-SiO₂, 3730 cm^-1 for Nano-Al₂O₃, and 3780 cm^-1 for O-CNTs). Also, density functional theory (DFT) calculation verified that the smaller |ΔpK_a| between PCs and O-rich sorbents, the shorter bond length, and the larger bond angle resulted in the stronger hydrogen bond formed, thereby leading to the greater immobilization of PCs. These results provide in-depth understanding of the environmental behavior and risk of PCs, and light new idea for designed materials to control PCs pollution in the environment.

Effect of pH-Dependent Homo/Heteronuclear CAHB on Adsorption and Desorption Behaviors of Ionizable Organic Compounds on Carbonaceous Materials

Herein, the adsorption/desorption behaviors of benzoic acid (BA) and phthalic acid (PA) on three functionalized carbon nanotubes (CNTs) at various pH were investigated, and the charge-assisted H-bond (CAHB) was verified by DFT and FTIR analyses to play a key role. The results indicated that the adsorption order of BA and PA on CNTs was different from K_ow of that at pH 2.0, 4.0, and 7.0 caused by the CAHB interaction. The strength of homonuclear CAHB (≥78.96 kJ·mol^-1) formed by BA/PA on oxidized CNTs is stronger than that of heteronuclear CAHB formed between BA/PA and amino-functionalized CNTs (≤51.66 kJ·mol^-1). Compared with the heteronuclear CAHB (Hysteresis index, HI ≥ 1.47), the stronger homonuclear CAHB leads to clearly desorption hysteresis (HI ≥ 3.51). Additionally, the contribution of homonuclear CAHB (≥52.70%) was also greater than that of heteronuclear CAHB (≤45.79%) at pH 7.0. These conclusions were further confirmed by FTIR and DFT calculation, and the crucial evidence of CAHB formation in FTIR was found. The highlight of this work is the identification of the importance and difference of pH-dependent homonuclear/heteronuclear CAHB on the adsorption and desorption behaviors of ionizable organic compounds on carbonaceous materials, which can provide a deeper understanding for the removal of ionizable organic compounds by designed carbonaceous materials.

Direct Spectroscopic Evidence for Charge-Assisted Hydrogen-Bond Formation between Ionizable Organic Chemicals and Carbonaceous Materials

The direct evidence for the formation of charge-assisted hydrogen bond (CAHB) between the charged groups of ionizable organic chemicals (IOCs) and carbonaceous materials with similar proton affinity remains elusive. We therefore selected three pharmaceutical contaminants (PCs) as representative IOCs to provide the direct evidence of CAHB formation between IOCs and functionalized carbon nanotubes (CNTs) and its intensity/contribution to PC sorption on CNTs by NMR, FTIR, and DFT analyses. Sorption of PCs on functionalized CNTs resulted in the FTIR characteristic peak that appeared at a higher frequency (3787 cm^-1) and the ¹H NMR characteristic peak that emerged at an extremely low-field region (<18.0 ppm), which can be used as the direct spectroscopic evidence for CAHB formation. Both homonuclear CAHB (HM-CAHB, e.g., [O-H···O]^-) and heteronuclear CAHB (HT-CAHB, e.g., [N⁺-H···O^-]/[O-H···N]⁺) exhibited a much higher sorption energy (|E_ads| ≥ 56.24 kJ/mol) than ordinary hydrogen bond (OHB, |E_ads| ≤ 6.136 kJ/mol), leading to a greater sorption contribution (HM-/HT-CAHB ≥ 42.3%, OHB ≤ 36.5%) and irreversibility (hysteresis index: HM-/HT-CAHB ≥ 1.69, OHB ≤ 0.43) of PCs on CNTs. This work presents the direct evidence for CAHB formation between IOCs and CNTs, which is significant for understanding and predicting the environmental fate and risk of IOCs, thus providing new insights for controlling their pollution using specifically designed carbonaceous materials.

Biochar as environmental armour and its diverse role towards protecting soil, water and air

Biochar has been of considerable importance for various environmental applications in recent years. It has exhibited substantial advantages like favourable structural and surface properties, easy process of preparation and widely available feedstocks. These set of exceptional properties make it an efficient, cost-effective and environment friendly source for diversified elimination of pollutants. The heterogeneity of physico-chemical properties offers a possibility for biochar to optimize its efficacy for targeted applications. This review aims to highlight the critical role that biochar plays in various environmental applications, be it in soil, water or air. In particular the article offers a comprehensive review of the recent research findings and updates related to the diversified role of biochar. Also, the interaction of pollutants with biochar functional groups and the impact of variation of parameters on biochar attribute relevant to specific pollutant removal, modifications, mechanisms involved and competence for such removal has been discussed. Different technologies for production of biochar have also been summarized with an emphasis on post treatment of biochar, such as modification and doping. In addition to this, the underlying gaps in the studies carried out so far and recommendations for future research areas in biochar have also been deliberated.

Removal of contaminants of emerging concern from multicomponent systems using carbon dioxide activated biochar from lignocellulosic feedstocks

Adsorption of six contaminants of emerging concern (CECs) - caffeine, chloramphenicol, carbamazepine, bisphenol A, diclofenac, and triclosan - from a multicomponent solution was studied using activated biochars obtained from three lignocellulosic feedstocks: wheat straw, softwood, and peach stones. Structural parameters related to the porosity and ash content of activated biochar and the hydrophobic properties of the CECs were found to influence the adsorption efficiency. For straw and softwood biochar, activation resulted in a more developed mesoporosity, whereas activation of peach stone biochar increased only the microporosity. The most hydrophilic CECs studied, caffeine and chloramphenicol, displayed the highest adsorption (22.8 and 11.3 mg g^-1) onto activated wheat straw biochar which had the highest ash content of the studied adsorbents (20 wt%). Adsorption of bisphenol A and triclosan, both relatively hydrophobic substances, was highest (31.6 and 30.2 mg g^-1) onto activated biochar from softwood, which displayed a well-developed mesoporosity and low ash content.

Small organic molecules act as a trigger in an "unzippering" mechanism to facilitate carbon nanotube dispersion

In binary dispersing agents system, the contribution and roles of different sized molecules to carbon nanotubes (CNTs) dispersion remain unclear, which hinders the understanding of the environmental behaviour and risks of CNTs. This study compared the dispersion of CNTs by m-nitrobenzoic acid (NBA), trans-cinnamic acid (TCA), tannic acid (TA), and their mixtures. The dispersion efficiency of CNTs significantly reduced with the increased solid-phase concentration (Q_e) of TA due to the adsorption of TA on newly exposed CNTs surfaces. However, the CNTs dispersion efficiency by NBA or TCA was independent of Q_e because the dispersed CNTs surface was completely occupied by NBA or TCA without new exposed sites available for subsequent adsorption. The mixture of NBA or TCA with TA significantly enhanced the dispersion efficiency of CNTs, indicating a synergistic effect of CNTs dispersion. The addition of NBA or TCA decreased the hydrodynamic diameter of CNTs dispersed by TA, which indicated that NBA or TCA facilitated TA wedging into CNTs bundles for more complete separation of CNTs. This study highlighted the triggering effect of small molecules in the "unzippering" mechanism for improving the dispersing efficiency of CNTs by large molecules.

Comparative environmental assessment of end-of-life carbonaceous water treatment adsorbents

This study evaluates and compares the environmental impacts arising from the disposal of different carbonaceous sorbents used for wastewater treatment. Three different adsorption materials were considered, i.e. activated carbon, biochar and hydrochar, and three end-of-life management approaches, i.e. incineration, regeneration and landfilling. The highest overall environmental impact was of Carcinogenic effects and Freshwater Ecotoxicity due to emissions of heavy metals during production of all types of sorbents. The use of materials with higher adsorption capacities and regeneration of carbonaceous materials were considered and shown to be an efficient way for reducing the overall environmental impacts of the different adsorbents. The compensation of fossil fuel incineration by using recovered heat led to negative impacts in all categories. Recirculation of HTC process water reduced the impact on Freshwater Ecotoxicity and Eutrophication.

Adsorption of aromatic carboxylic acids on carbon nanotubes: impact of surface functionalization, molecular size and structure

A large quantity of emerging contaminants are ionizable, and the ionized compounds display different adsorption behaviors than their neutral counterparts. In particular, a strong intermolecular force, negative charge assisted hydrogen bonding ((-)CAHB), was recently identified, which explains the unusually strong adsorption of negatively charged compounds on carbon nanotubes with oxygen-containing functional groups. However, most previous studies only probed molecules with one benzene ring. The adsorption of ionizable compounds with more than one benzene ring and additional functional groups has not been examined. This study investigated the effect of surface functionalization, molecular size and structure of six aromatic carboxylic acids on their adsorption on multi-walled carbon nanotubes (MWNTs) in batch reactors. In addition, the short-range interactions of the neutral acids with MWNTs were calculated to evaluate the effect of aromaticity and bulkiness. Hydrophobicity and electrostatic interactions dominate the intermolecular forces between ionized contaminants and MWNT surfaces. pH dependent octanol/water partitioning coefficient (Dow) is a more precise indicator of the adsorption of ionizable compounds on MWNTs. (-)CAHB is a significant force only for compounds with one benzene ring. Hydroxyl and carboxyl functional groups displayed similar capacity to form (-)CAHB, as indicated by the release of hydroxide ions.

New insights on the understanding of the high adsorption of bisphenol compounds on reduced graphene oxide at high pH values via charge assisted hydrogen bond

The adsorption characteristics and mechanisms of ionic organic compounds dependent on their dissociation species are still unclear, which hindered the understanding of their environmental behavior and risks. This study compared the sorption of four bisphenol compounds (BCs) on graphite adsorbents, with a specific emphasis on the roles of charge assisted hydrogen bond (CAHB). The negative correlations between the localized orbital locator integrated π over plane index and the single point adsorption coefficient K_d of the four BCs indicated that π-π interaction was an important mechanism for BCs adsorption on graphite adsorbents. Based on the speciation distribution calculation and the modeling of pH-dependent adsorption, the apparent adsorption coefficient of different species were obtained. Except for bisphenol S, the K_d^HA- of BC monovalent anions was 2.6 times to one order magnitude higher than that of the neutral species. According to the density functional theory (DFT) calculation, strong CAHB is expected between BC monovalent anions and graphite adsorbents, indicating that CAHB overcame the enhanced electrostatic repulsion and became the dominant adsorption mechanism. This study highlighted the importance of CAHB in the adsorption of ionic organic compounds on carbonaceous materials, which should be carefully taken into consideration for their environmental fate studies.

Insights into the Glyphosate Adsorption Behavior and Mechanism by a MnFe2O4@Cellulose-Activated Carbon Magnetic Hybrid

To enhance the removal of the negatively charged organophosphorus pesticide (OPP) glyphosate (GLY), we prepared a positively charged MnFe₂O₄@cellulose activated carbon (CAC) hybrid by immobilizing MnFe₂O₄ nanoparticles on the CAC surface via a simple one-pot solvothermal method, scanning electron microscopy, BET, transmission electron microscopy, IR, Raman, X-ray diffraction, and X-ray photoelectron spectroscopy analysis which proved the successful synthesis of MnFe₂O₄ with a particle size of 100-300 nm. The particles were distributed on the surface of CAC to form the MnFe₂O₄@CAC hybrid. MnFe₂O₄@CAC exhibited a positive charge at pH below 6 and had good magnetic properties and dispersion stability. The maximum GLY adsorption capacity of MnFe₂O₄@CAC (167.2 mg/g) was much higher than that of CAC (61.44 mg/g) and MnFe₂O₄ nanoparticles (93.48 mg/g). The adsorption process was dominated by chemisorption, and the formation of new chemical bonds between GLY and MnFe₂O₄ was confirmed by simulations. The newly formed chemical bonds were attributed to the conjugation between p electrons of the adsorbent and the d electrons of the adsorbate. Collectively, the results indicate that the as-prepared MnFe₂O₄@CAC is promising for anionic pollutant adsorption and the removal of OPPs, and our mechanistic results are of guiding significance in environmental cleanup.

Enhanced adsorption of anionic toxic contaminant Congo Red by activated carbon with electropositive amine modification

Anionic ionizable toxic organic contaminants, such as pesticides, herbicides, pharmaceuticals and dyestuffs, are widely detected in aqueous and can exert specific toxicity in organisms. They are hard removed by traditional adsorbents with negative surface charges and hydrophilic property. To solve that bottleneck problem, this study synthesized a carbon-based electropositive absorbent via surface activation and radical impregnation. The monolayer adsorption capacity and favorability of the novel adsorbent increased 4.2 and 16 times compared with activated carbon, evaluated by Congo Red. The adsorption kinetics could be described by pseudo-second-order equation, dominated by chemisorption and shortened 75% equilibrium time. The excellent adsorption behavior of synthesized material was attributed to created and bridged electropositive quaternary ammonium structure onto activated carbon, identified with XPS and FT-IR. Additionally, the abundant mesoporous structures of modified carbon provide more tunnels and facilitate adsorption of Congo Red, identified by AutoSorb-iQ. With the batch experiments of pH and ion strength influence, the absorbent behaved well in acidic low ion strength conditions and attenuated by coexisting cations. The study provides a high efficiency, large capacity and low cost materials to remove anionic ionizable organic contaminants in aqueous.