Concentrations, fluxes and field calibration of passive water samplers for pesticides and hazard-based risk assessment

Characterization of The Permeation Properties of Membrane Filters and Sorption Properties of Sorbents Used for Polar Organic Chemical Integrative Samplers

Polar organic chemical integrative samplers (POCIS) are promising devices for measuring the time-weighted average concentrations of hydrophilic compounds in aquatic environments. However, the mechanisms underlying compound uptake by POCIS remain unclear. We investigated the permeation kinetics of polyethersulfone and polytetrafluoroethylene membrane filters, and the sorption kinetics of Oasis HLB (Waters), Envi-Carb (Supelco), and Oasis WAX (Waters) sorbents. The log octanol-water partition coefficient (KOW) values of the 19 targeted compounds ranged from -0.55 to 6.0. The overall mass-transfer coefficients were negatively correlated with KOW, indicating that interactions between hydrophobic compounds and the membrane inhibit permeation. The sorption rate coefficient showed no correlation with KOW and depended on the type of sorbent used. These results imply that the uptake of highly hydrophilic compounds by POCIS is determined by both the membrane and the sorbent kinetics; however, membrane kinetics dominate the uptake of hydrophobic compounds. Environ Toxicol Chem 2024;00:1-7. © 2024 SETAC.

Determination of pesticide residue in marginal lagoons of natural parks in Brazil using an improved calibrate passive sampler

Passive sampling is a sensitive and efficient method for analyzing pesticides in water. This article describes a hollow fiber liquid-phase microextraction (HF-LPME) device that was improved using polypropylene membranes grafted with nanocellulose for the passive sampling of pesticides in water. A comprehensive gas chromatography time-of-flight mass spectrometry (GCxGC/Q-TOFMS) system was used to separate, identify, and quantify pesticides. The sampling rates of 38 moderately hydrophobic to hydrophobic agricultural pesticides (2.18 < log Kow < 6.89) from different chemical classes, including the main triazine, organochlorine and organophosphate compounds, were calculated. A calibration process was applied to evaluate the role of flow velocity and select potential candidates for a possible performance reference compound (PRC). Sampling rates varied between 0.17 mL d-1 and 23.15 mL d-1. The accumulation curves identified linear periods ranging from 3 to 18 days. The new passive sampler device was applied for 8 days in rivers and marginal lagoons of natural parks of the São Francisco basin in Minas Gerais, Brazil and identified 10 target pesticides. Furthermore, 10 non-targeted pesticides were detected by the GCxGC/Q-TOFMS method.

Examining the applicability of polar organic chemical integrative sampler for long-term monitoring of groundwater contamination caused by currently used pesticides

The possibilities of expanding a groundwater quality monitoring scheme by passive sampling using polar organic chemical integrative sampler (POCIS) comprising HLB sorbent as the receiving phase were explored. Passive sampling and grab sampling were carried out simultaneously in the regions with vulnerable groundwater resources in Slovakia, between 2013 and 2021. For 27 pesticides and degradation products detected both in POCIS and the grab samples, in situ sampling rates were calculated and statistically evaluated. The limited effectiveness of the receiving phase in POCIS for sampling polar or ionized compounds was confirmed through a comparison of the medians of compound-specific sampling rates. For the majority of the monitored compounds the median sampling rates varied between 0.01 and 0.035 L/day. In some cases, the actual in situ values could be confirmed by parallel exposure of POCIS and silicone rubber sheet employed to obtain a benchmark for maximum attainable sampling rate. Sampling site and sampling period appear to have also some influence on the sampling rates, which was attributed in part to the groundwater velocity varying in both space and time. The influence of physico-chemical parameters (temperature, pH, electrolytic conductivity) remains mostly questionable due to the naturally limited ranges of recorded values over the entire duration of the study. Concentrations of pollutants in POCIS could be used for predicting time weighed average concentrations in water, provided the sampling rates were known and relatively constant. Generally, the compound-specific sampling rate cannot be considered constant due to a combination of naturally varying environmental factors that influence the actual in situ sampling rate. The relative standard deviation of concentration data from POCIS exposed in triplicates varied between approx. 5 %-50 %. Utilizing exploratory data analysis approach and tools enabled us to obtain a relatively complex picture of the situation and progress regarding pesticide pollution of groundwater in the monitored areas.

In situ calibration of passive sampling methods for urban micropollutants using targeted multiresidue GC and LC screening systems

In this study, Chemcatcher^TM (CC) and Polar Organic Chemical Integrative Samplers (POCIS) passive samplers were chosen to investigate trace organic chemical residues in urban streams of the megacity of Sydney, Australia. In situ calibration with these passive samplers investigated 1392 organic chemicals. Six sets of CC passive samplers fitted with SDB-XC or SDB-RPS disks and six POCIS containing Oasis HLB sorbent were deployed at three sites. Every week for six weeks across three deployments, composite water samples were retrieved from autosamplers, along with one set of CC/POCIS passive samplers. Samples were analysed by Automated Identification and Quantification System (AIQS) GC/MS or LC/QTOF-MS database methods with 254 chemicals detected. The most frequently detected compounds under GC/MS analysis were aliphatic, pesticides, phenols, PAHs, sterols and fatty acid methyl esters while from LC/QTOF-MS analysis these were pesticides, pharmaceuticals, and personal care products. Sampling rates (R_s) ranged between <0.001 - 0.132 L day^-1 (CC SDB-XC, 18 chemicals), <0.001 - 0.291 L day^-1 (CC SDB-RPS, 28 chemicals), and <0.001 - 0.576 L day^-1 (POCIS Oasis HLB, 30 chemicals). Assessment of deployment duration indicated that about half of the chemicals that were continuously detected across all deployment weeks had maximal simple linear regression R² values at four weeks for CC SDB-RPS (seven of 13 chemicals) and at three weeks for POCIS Oasis HLB (seven of 14 chemicals). Where ranges of R_s recorded from the estuarine site were able to be compared to ranges of R_s from one or both freshwater sites, only tributyl phosphate had a higher range of R_s out of 21 possible chemical comparisons, and suggested salinity was an unlikely influence on R_s. Whereas relatively higher rainfall of the third round of deployment aligned with higher R_s across the estuarine and freshwater sites for CC SDB-RPS and POCIS for nearly all possible comparisons.

A Review of In Situ Methods-Solid Phase Adsorption Toxin Tracking (SPATT) and Polar Organic Chemical Integrative Sampler (POCIS) for the Collection and Concentration of Marine Biotoxins and Pharmaceuticals in Environmental Waters

Solid Phase Adsorption Toxin Tracking (SPATT) and Polar Organic Chemical Integrative Sampler (POCIS) are in situ methods that have been applied to pre-concentrate a range of marine toxins, pesticides and pharmaceutical compounds that occur at low levels in marine and environmental waters. Recent research has identified the widespread distribution of biotoxins and pharmaceuticals in environmental waters (marine, brackish and freshwater) highlighting the need for the development of effective techniques to generate accurate quantitative water system profiles. In this manuscript, we reviewed in situ methods known as Solid Phase Adsorption Toxin Tracking (SPATT) and Polar Organic Chemical Integrative Sampler (POCIS) for the collection and concentration of marine biotoxins, freshwater cyanotoxins and pharmaceuticals in environmental waters since the 1980s to present. Twelve different adsorption substrates in SPATT and 18 different sorbents in POCIS were reviewed for their ability to absorb a range of lipophilic and hydrophilic marine biotoxins, pharmaceuticals, pesticides, antibiotics and microcystins in marine water, freshwater and wastewater. This review suggests the gaps in reported studies, outlines future research possibilities and guides researchers who wish to work on water contaminates using Solid Phase Adsorption Toxin Tracking (SPATT) and Polar Organic Chemical Integrative Sampler (POCIS) technologies.

A miniaturized passive sampling-based workflow for monitoring chemicals of emerging concern in water

The miniaturization of a full workflow for identification and monitoring of contaminants of emerging concern (CECs) is presented. Firstly, successful development of a low-cost small 3D-printed passive sampler device (3D-PSD), based on a two-piece methacrylate housing that held up to five separate 9 mm disk sorbents, is discussed. Secondly, a highly sensitive liquid chromatography-tandem mass spectrometry (LC-MS/MS) method reduced the need for large scale in-laboratory apparatus, solvent, reagents and reference material quantities for in-laboratory passive sampler device (PSD) calibration and extraction. Using hydrophilic-lipophilic balanced sorbents, sampling rates (R_s) were determined after a low 50 ng L^-1 exposure over seven days for 39 pesticides, pharmaceuticals, drug metabolites and illicit drugs over the range 0.3 to 12.3 mL day^-1. The high sensitivity LC-MS/MS method enabled rapid analysis of river water using only 10 μL of directly injected sample filtrate to measure occurrence of 164 CECs and sources along 19 sites on the River Wandle, (London, UK). The new 3D-PSD was then field-tested over seven days at the site with the highest number and concentration of CECs, which was down-river from a wastewater treatment plant. Almost double the number of CECs were identified in 3D-PSD extracts across sites in comparison to water samples (80 versus 42 CECs, respectively). Time-weighted average CEC concentrations ranged from 8.2 to 845 ng L^-1, which were generally comparable to measured concentrations in grab samples. Lastly, high resolution mass spectrometry-based suspect screening of 3D-PSD extracts enabled 113 additional compounds to be tentatively identified via library matching, many of which are currently or are under consideration for the EU Watch List. This miniaturized workflow represents a new, cost-effective, and more practically efficient means to perform passive sampling chemical monitoring at a large scale. SYNOPSIS: Miniaturized, low cost, multi-disk passive samplers enabled more efficient multi-residue chemical contaminant characterization, potentially for large-scale monitoring programs.

Passive sampling with suspect screening of polar pesticides and multivariate analysis in river catchments: Informing environmental risk assessments and designing future monitoring programmes

Pollution of surface water by polar pesticides is a major environmental risk, particularly in river catchments where potable water supplies are abstracted. In these cases, there is a need to understand pesticide sources, occurrence and fate. Hence, we developed a novel strategy to improve water quality management at the catchment scale using passive sampling coupled to suspect screening and multivariate analysis. Chemcatcher® passive sampling devices were deployed (14 days) over a 12 month period at eight sites (including a water supply works abstraction site) in the Western Rother, a river catchment in South East England. Sample extracts (n = 197) were analysed using high-resolution liquid chromatography-quadrupole-time-of-flight mass spectrometry and compounds identified against a commercially available database. A total of 128 pesticides from different classes were found. Statistical analysis of the qualitative screening data was used to identify clusters of pesticides with similar spatiotemporal pollution patterns. This enabled pesticide sources and fate to be identified. At the water supply works abstraction site, spot sampling and passive sampling were found to be complementary, however, the passive sampling method in conjunction with suspect screening detected 50 pesticides missed by spot sampling combined with targeted analysis. Geospatial data describing pesticide application rates was found to be poorly correlated to their detection frequency using the Chemcatcher®. Our analysis prioritised 61 pesticides for inclusion in a future water quality risk assessment at the abstraction site. It was also possible to design a seasonal monitoring programme to effectively characterise the spatiotemporal pesticide profiles within the catchment. A work flow of how to incorporate passive sampling coupled to suspect screening into existing regulatory monitoring is proposed. Our novel approach will enable water quality managers to target the mitigation (non-engineered actions) of pesticide pollution within the catchment and hence, to better inform drinking water treatment processes and save on operational costs.

Field application of a novel active-passive sampling technique for the simultaneous measurement of a wide range of contaminants in water

A first test of the field capabilities of a novel in situ sampling technique combining active and passive sampling (APS) was conducted in the sea. The proof-of-concept device uses a pump to draw water into a diffusion cell where dissolved target substances are accumulated onto sorbents which are selective for different classes of contaminants (i.e., metal cations, polar and non-polar organic compounds), simultaneously. A controlled laminar flow established in the diffusion cell enables measurements of contaminant concentrations that are fully independent from the hydrodynamic conditions in the bulk solution. APS measurements were consistent with those obtained using conventional passive sampling techniques such as organic diffusive gradients in thin films (o-DGT) and silicone rubber (SR) samplers (generally < 40% difference), taking into account the prevailing hydrodynamic conditions. The use of performance reference compounds (PRC) for hydrophobic contaminants provided additional information. Field measurements of metal ions in seawater showed large variability due to issues related to the device configuration. An improved field set-up deployed in supplementary freshwater mesocosm experiments provided metal speciation data that was consistent with passive sampling measurements (DGT), taking into account the hydrodynamic conditions. Overall, the results indicate that the APS technique provides a promising approach for the determination of a wide range of contaminants simultaneously, and independently from the hydrodynamic conditions in the bulk solution.

Identification of Pesticide Transformation Products in Surface Water Using Suspect Screening Combined with National Monitoring Data

Pesticides are widespread anthropogenic chemicals and well-known environmental contaminants of concern. Much less is known about transformation products (TPs) of pesticides and their presence in the environment. We developed a novel suspect screening approach for not well-explored pesticides (n = 16) and pesticide TPs (n = 242) by integrating knowledge from national monitoring with high-resolution mass spectrometry data. Weekly time-integrated samples were collected in two Swedish agricultural streams using the novel Time-Integrating, MicroFlow, In-line Extraction (TIMFIE) sampler. The integration of national monitoring data in the screening approach increased the number of prioritized compounds approximately twofold (from 23 to 42). Ultimately, 11 pesticide TPs were confirmed by reference standards and 12 TPs were considered tentatively identified with varying levels of confidence. Semiquantification of the newly confirmed TPs indicated higher concentrations than their corresponding parent pesticides in some cases, which highlights concerns related to (unknown) pesticide TPs in the environment. Some TPs were present in the environment without co-occurrence of their corresponding parent compounds, indicating higher persistency or mobility of the identified TPs. This study showcased the benefits of integrating monitoring knowledge in this type of studies, with advantages for suspect screening performance and the possibility to increase relevance of future monitoring programs.

Comparative field study on bioassay responses and micropollutant uptake of POCIS, Speedisk and SorbiCell polar passive samplers

Routine water quality monitoring is generally performed with chemical analyses of grab samples, which has major limitations. First, snapshot samples will not give a good representation of the water quality. Second, it is not sufficient to analyze only a limited number of (priority) pollutants. These limitations can be circumvented by an alternative environmental risk assessment that combines time-integrated passive sampling (PS) with effect-based methods. This study aimed to select which of three polar PS devices was best suited for effect-based monitoring strategies. In the first part of this study, Speedisk, SorbiCell and POCIS polar PS devices were compared by simultaneous deployment at five sites. Chemical analyses of 108 moderately polar compounds (-1.82 < log D < 6.28) revealed that highest number of compounds, with the widest range of log K_OW, log D and pKa, were detected in extracts of POCIS, followed by Speedisk. SorbiCell samplers accumulated the lowest numbers and concentrations of compounds, so they were not further investigated. In a follow-up study, bioassay responses were compared in extracts of POCIS and Speedisk devices deployed at eight sites. The passive sampler extracts were subjected to bioassays for non-specific toxicity, endocrine disruption, and antibiotics activities. More frequent and higher responses were induced by POCIS extracts, leading to more exceedances of effect-based trigger values for environmental risks. As POCIS outperformed Speedisk, it is better suited as PS device targeting polar compounds for semi-quantitative effect-based water quality monitoring.

In situ calibration of polar organic chemical integrative sampler (POCIS) for monitoring of pharmaceuticals in surface waters

POCIS is the most widely applied passive sampler of polar organic substances, because it was one of the first commercially available samplers for that purpose on the market, but also for its applicability for a wide range of substances and conditions. Its main weakness is the variability of sampling performance with exposure conditions. In our study we took a pragmatic approach and performed in situ calibration for a set of 76 pharmaceuticals and their metabolites in five sampling campaigns in surface water, covering various temperature and flow conditions. In individual campaigns, R_S were calculated for up to 47 compounds ranging from 0.01 to 0.63 L d^-1, with the overall median value of 0.10 L d^-1. No clear changes of R_S with water temperature or discharge could be found for any of the investigated substances. The absence of correlation of experimental R_S with physical-chemical properties in combination with the lack of mechanistic understanding of compound uptake to POCIS implies that practical estimation of aqueous concentrations from uptake in POCIS depends on compound-specific experimental calibration data. Performance of POCIS was compared with grab sampling of water in seven field campaigns comprising multiple sampling sites, where sampling by both methods was done in parallel. The comparison showed that for 25 of 36 tested compounds more than 50% of POCIS-derived aqueous concentrations did not differ from median of grab sampling values more than by a factor of 2. Further, for 30 of 36 compounds, more than 80% of POCIS data did not differ from grab sampling data more than by a factor of 5. When accepting this level of accuracy, in situ derived sampling rates are sufficiently robust for application of POCIS for identification of spatial and temporal contamination trends in surface waters.

The effects of a short-term exposure to propiconazole in zebrafish (Danio rerio) embryos

Propiconazole (PCZ) is a widely used fungicide around the world and was frequently detected in surface waters, which would pose risk to aquatic organisms. Previous studies indicated that PCZ has high toxicity to different kinds of fish. However, most of the studies focus on the toxicity and mechanisms of PCZ to adult fish, the potential toxicity mechanism of PCZ to fish embryos is still poorly understood. The present study investigated the effects of PCZ on content of reactive oxygen species (ROS) and malondialdehyde (MDA); activities of superoxide dismutase (SOD), catalase (CAT), and Na⁺-K⁺-ATPase; and expression level of genes related to oxidative stress, cell apoptosis, and innate immune system in zebrafish embryos after 96-h exposure. The results showed that 5.0 mg/L PCZ induced oxidative damage in zebrafish embryos, as indicated by increased ROS and MDA content and alteration of antioxidative enzyme activity. The activity of Na⁺-K⁺-ATPase in zebrafish embryos was significantly inhibited after exposure to 0.5 mg/L PCZ. The expression levels of bax, p53, casp-3, casp-9, and apaf-1 were significantly increased, indicating that cell apoptosis was caused in embryos by 5.0 mg/L PCZ. The expression level of interleukin-1b (IL-1b) and IL-8 increased after exposure to 0.5 mg/L PCZ, but that of IL-1b, IL-8, and cxcl-c1c (chemokine (C-X-C motif) ligand 18b) decreased in 5.0-mg/L PCZ treatment group, indicating an immunotoxicity effect. Our results suggest that oxidative damage, cell apoptosis, and immunotoxicity would be induced in zebrafish embryos after short-term exposure to PCZ.

Use of Chemcatcher® passive sampler with high-resolution mass spectrometry and multi-variate analysis for targeted screening of emerging pesticides in water

Pesticides present at trace concentrations are a common cause of poor water quality. Their concentrations can change dynamically, due to the stochastic nature of pesticide pollution. Consequently, characterisation of pesticide residues that are intermittently present, poses significant monitoring and analytical challenges. Traditional approaches rely on quantitation of a limited number of pesticides present in a discrete water sample. Expanding the analytical suite and/or the frequency of sampling to meet these challenges is often impractical. Comprehensive methods are needed, with selectivity and sensitivity for the hundreds of pesticides potentially present, and temporal representativeness to ensure changing conditions are understood, in order to identify and prioritise risk. Recent analytical advances have enabled the targeted screening of hundreds of compounds in the same run, and automated work-flows can now reliably identify compounds through the comparison of retention time and accurate mass with spectral libraries. Screening generates large qualitative data sets, therefore, there is a need for improved monitoring methods and data interpretation strategies to reduce the need for repetition, and increase the quality of information for end-users. Passive sampling is an in situ time integrative technique, increasingly used for monitoring pesticides in water. Here, we describe a method using the Chemcatcher® passive sampler, coupled to targeted screening using liquid chromatography-quadrupole-time-of-flight mass spectrometry, and a commercially available library. Statistical analysis was performed using Agilent Mass Profiler Professional software. Water sampling took place over one year, at three riverine sites in the south of England, UK. Statistical interpretation of time integrative data from passive sampling could distinguish regular and episodic pesticide inputs, and detected compounds neglected by routine monitoring methods. One hundred and eleven pesticides were identified including legacy and current use compounds with diverse origins and uses. Spatial and temporal trends were identified enabling prioritisation of seasonal monitoring at each site. This approach maximises the utility of qualitative assessment and may help water quality managers to rationalise pesticide fate in future, providing significant additional insight without the need to increase the scope and cost of monitoring.

Evaluation of chemical and biological contaminants of emerging concern in treated wastewater intended for agricultural reuse

The occurrence of chemical and biological contaminants of emerging concern (CECs) was investigated in treated wastewater intended for reuse in agriculture. An agarose hydrogel diffusion-based passive sampler was exposed to the outlet of a wastewater treatment plant (WWTP) located in Cyprus, which is equipped with membrane bioreactor (MBR). Passive samplers in triplicate were exposed according to a time-series exposure plan with maximum exposure duration of 28 days. Composite flow-proportional wastewater samples were collected in parallel with the passive sampling exposure plan and were processed by solid phase extraction using HORIZON SPE-DEX 4790 and the same sorbent material (Oasis HLB) as in the passive sampler. The analysis of passive samplers and wastewater samples enabled (i) the field-scale calibration of the passive sampler prototype by the calculation of in situ sampling rates of target substances, and (ii) the investigation of in silico predicted transformation products of the four most ecotoxicologically hazardous antibiotics (azithromycin, clarithromycin, erythromycin, ofloxacin). Additionally, the wastewater samples were subjected to the analysis of seven preselected antibiotic resistant genes (ARGs) and one mobile resistant element (int1). All extracts were analyzed for chemicals in a single batch using a highly sensitive method for pharmaceuticals, antibiotics and illicit drugs by liquid chromatography tandem MS/MS (LC-QQQ) and for various other target compounds (2316 compounds in total) by liquid chromatography high-resolution mass spectrometry (LC-HRMS). 279 CECs and all investigated ARGs (except for bla_CTX-M-32) were detected, highlighting potential chemical and biological hazards related to wastewater reuse practices. 16 CECs were prioritized following ecotoxicological risk assessment, whereas sul1 and the mobile resistant element (int1) showed the highest abundance. Comprehensive monitoring efforts using novel sampling methods such as passive sampling, wide-scope target screening and molecular analysis are required to assure safe application of wastewater reuse and avoid spread and crop uptake of potentially hazardous chemicals.

Sorption kinetics of parent and substituted PAHs for low-density polyethylene (LDPE): Determining their partition coefficients between LDPE and water (KLDPE) for passive sampling

Low-density polyethylene (LDPE) has been widely used as a sorbent for passive sampling of hydrophobic organic contaminants (HOCs) in aquatic environments. However, it has seen only limited application in passive sampling for measurement of freely dissolved concentrations of parent and substituted PAHs (SPAHs), which are known to be toxic, mutagenic and carcinogenic. Here, the 16 priority PAHs and some typical PAHs were selected as target compounds and were simultaneously determined by gas chromatography-mass spectrometer (GC-MS). Some batch experiments were conducted in the laboratory to explore the adsorption kinetics of the target compounds in LDPE membranes. The results showed that both PAHs and SPAHs could reach equilibrium status within 19-38 days in sorption kinetic experiments. The coefficients of partitioning between LDPE film (50 μm thickness) and water (K_LDPE) for the 16 priority PAHs were in good agreement with previously reported values, and the values of K_LDPE for the 9 SPAHs are reported in this study for the first time. Significant linear relationships were observed, i.e., log K_LDPE = 0.705 × log K_OW + 1.534 for PAHs (R² = 0.8361, p < 0.001) and log K_LDPE = 0.458 × log K_OW + 3.092 for SPAHs (R² = 0.5609, p = 0.0077). The selected LDPE film was also proven to meet the condition of "zero sink" for the selected target compounds. These results could provide basic support for the configuration and in situ application of passive samplers.