Insights into the phosphate adsorption behavior onto 3D self-assembled cellulose/graphene hybrid nanomaterials embedded with bimetallic hydroxides

Unraveling the Phosphorus Adsorption Mechanisms in Three-dimensional Reduced Graphene Oxide Materials

To prevent eutrophication, controlling the phosphate concentration levels is one of the most important issues in surface water management. One of the most utilized methods is phosphate adsorption. However, its application faces a bottleneck due to the unclear understanding of adsorption and interaction mechanisms. The present work unlocks the phosphorus adsorption mechanisms in three-dimensional reduced graphene oxide with different reduction levels and pore sizes to remove phosphate from water using experiments and multiscale simulations. Experiments were performed to evaluate the influence of pH, ionic strength, and temperature on the adsorption. Molecular Dynamics and Ab Initio simulations evaluated the influence of the pore size and oxidation degrees of the materials. We show that the adsorption capacity of the materials increases with increasing pH and ionic strength and decreasing temperature. It is observed that the more oxidized the material and the less compact the structure, the better the adsorption. These results are theoretically explained in terms of the interaction of functional groups and the clustering of phosphate ions, which results in better adsorption in materials with larger pores. The underlying mechanisms for the 3D-reduced graphene oxide performance were confirmed by spectroscopy analysis. All the results show that 3D-reduced graphene oxide can sorb phosphate in different complex water remediation systems with characteristics that can be modulated by changing the material synthesis method.

Synchronously construction of hierarchical porous channels and cationic surface charge on lanthanum-hydrogel for rapid phosphorus removal

Phosphorus (P) removal from wastewater is critical for ecosystem operation and resource recovery. To facilitate the recycling of the used absorbents through balancing their adsorption and desorption performance on P, in this work, a novel porous magnetic La(OH)3-loaded MAPTAC/chitosan (CTS)/polyethyleneimine (PEI) ternary composite hydrogel (p-MTCH-La(OH)3) with enhanced bifunctional adsorption sites was synthesized by simultaneous dissolution of pre-embedded CaCO3 and CTS powder, followed by grafting PEI and loading La. Hierarchical porous channels promoted good dispersion of La(OH)3, bringing an excellent P adsorption capacity of 107.23 ± 4.96 mg P/g at neutral condition. PEI grafted with CTS increased the surface charge and enhanced the electrostatic attraction, which facilitated the desorption of P. The porous structure and abundant active sites also facilitated rapid adsorption with an adsorption rate constant of 0.1 g mg-1 h-1. p-MTCH-La(OH)3 maintained effective P adsorption despite co-existence with competing substances and after 5 cycles. Further mechanistic analysis indicated that La-P inner sphere complexation and LaPO4 crystalline transformation were the main pathways for P removal. However, electrostatic interactions contributed 17.5%-46.7% of the adsorption amount during the first 30 min of rapid adsorption, enabling 92.8% of the adsorbed P at this stage to be desorbed by alkaline solution. Based on the variations of adsorption and desorption capacity with adsorption time, a rapid unsaturated adsorption of 1-2 h was proposed to facilitate the recycling of the adsorbent. This study proposed a method to promote P adsorption and desorption by enhancing bifunctional adsorption sites, and proved that p-MTCH-La(OH)3 is a promising phosphate adsorbent.

The role of Ca2+ in the improvement of phosphate adsorption in natural waters: Establishing an environmentally friendly La/Ca bimetallic organic framework

Modified metal-organic framework (MOF) materials are promising adsorbents for phosphate removal in aquatic environment. Herein, a high-efficiency and eco-friendly La/Ca composite (La/Ca-BTC) was designed by calcining La/Ca MOFs for phosphate adsorption. Batch adsorption experiments showed that La/Ca-BTC-3/1 (La: Ca molar ratio of 3: 1) had an excellent phosphate sorption capacity of 101.01 mg P/g, and could also maintain relatively high adsorption in the range of pH 4-8. Anion coexistence experiments showed that, except for carbonate ions, common anions have little effect on adsorption. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) analysis indicated that oxygen vacancies formed in the La/Ca-BTC, probably by metal doping. The density functional theory (DFT) calculation showed that oxygen vacancies could affect the orbital hybridization energy during phosphate adsorption by changing the state density, reducing the bond energy barrier for phosphate adsorption, thereby enhancing the adsorption effect of La/Ca-BTC. Phosphate adsorbents generally incur severe environmental risk by their gradual release of metal ions due to changes in water quality, especially where there is high natural organic matter (NOM). The DFT calculation further demonstrated that Ca²⁺ in the La/Ca-BTC was more inclined to combine with humic acid (HA) than La³⁺. Therefore, due to the introduction of Ca²⁺, La/Ca-BTC exhibited lower La-release in the presence of HA than La-BTC, which could be reduced by about 52.04%. Furthermore, La/Ca-BTC had the potential to simultaneously remove NOM which has important implication for aquatic remediation. These results are of great significance for the development of environmentally friendly phosphate adsorbents.

Electrochemical degradation of antibiotic enoxacin using a novel PbO2 electrode with a graphene nanoplatelets inter-layer: Characteristics, efficiency and mechanism

A novel PbO₂ electrode was fabricated by adding graphene nanoplatelets (GNP) inter-layer into β-PbO₂ active layer (called GNP-PbO₂) and utilized to degradation of antibiotic enoxacin (ENO). The GNP-PbO₂ electrode had a much rougher surface than the typical PbO₂ electrode, with smaller crystal size and lower charge-transfer resistance at the electrode/electrolyte interface. Notably, the GNP inter-layer increased the oxygen evolution potential of PbO₂ electrode (2.05 V vs. SCE), which was very beneficial to inhibit oxygen evolution and promote ·OH production. The relatively best operating parameters for ENO removal and energy efficiency were current density of 20 mA cm^-2, initial pH of 7, initial ENO concentration of 100 mg L^-1 and electrode distance of 4 cm. Furthermore, indirect radical oxidation was found to be the main way during electrolysis process. Based on the observed analysis of intermediate products, the main reaction pathways of ENO included hydroxylation, defluorination and piperazine ring-opening. Finally, combinating with the electro-oxidation capability, stability and safety evaluation, we can conclude that GNP-PbO₂ is a promising anode for treatment of various organic pollutants in wastewater.

Preparation, adsorption performance and mechanism of MgO-loaded biochar in wastewater treatment: A review

Biochar is a low cost, porous and solid material with an extremely high carbon content, various types of functional groups, a large specific surface area and many other desirable characteristics. Thus, it is often used as an adsorbent or a loading matrix. Nano-magnesium oxide is a crystalline material with small particles and strong ion exchangeability. However, due to the high surface chemical energy, it easily forms agglomerates of particles. Therefore, to combine the advantages of biochar and magnesium, metal magnesium nanoparticles can be loaded onto the surface of biochar with different modification techniques, resulting in biochars with low cost and high adsorption performance to be used as an adsorption matrix (collectively referred to as Mg@BC). This review presents the effects of different Mg@BC preparation methods and synthesis conditions and summarizes the removal capabilities and adsorption mechanisms of Mg@BC for different types of pollutants in water. In addition, the review proposes the prospects for the development of Mg@BC to solve various problems in the future.

Self-supported trimetallic NiZnLa nanosheets on hierarchical porous graphene oxide-polymer composite fibers for enhanced phosphate removal from water

Phosphate-induced water eutrophication has attracted global attention. Fabricating adsorbents with both high phosphate adsorption affinity and accessible separation property is challenging. Herein, PG@NZL, a hierarchical nanocomposite fibrous membrane, was fabricated via in-situ growth of La-doped NiZn-LDH (NiZnLa_0.1) over electrospun graphene oxide-polymer composite fibers (PG). The porous surface of the PG fibers provided abundant anchor sites for the vertical self-supported growth of NiZnLa_0.1 nanosheets, contributing to a high surface area. The La-doped NiZnLa_0.1 trimetallic LDH achieved a much higher adsorption capacity than NiZn-LDH. The negative adsorption energy (-1.45 eV), calculated with DFT, confirmed its spontaneous adsorption potential for phosphate. Interestingly, the PG fibers contributed to oxygen vacancies and the metal center electronic structure evolution of NiZnLa_0.1, thus strengthening the coordination with phosphate. Mechanistic analysis revealed that the high adsorption capacity of PG@NZL is attributed to its superior anion exchange property, oxygen vacancies, and inner-sphere complexation. Therefore, the flexible and easily separated PG@NZL nanocomposite fibrous membrane is a promising adsorbent for effectively treating phosphate-bearing wastewater.

Cerium-doped MIL-101-NH2(Fe) as superior adsorbent for simultaneous capture of phosphate and As(V) from Yangzonghai coastal spring water

A series of novel cerium-doped MIL-101-NH₂ materials were synthesized using the solvothermal method for the simultaneous efficient removal of phosphate and As(V). According to the characterization results, cerium was successfully loaded onto MIL-101-NH₂ and that Ce-MOFs might be generated during the loading process, which modified the crystal structure of MIL-101-NH₂ and resulted in MOFs with different microstructures. In single-uptake systems containing only phosphate or As(V), isothermal adsorption experiments showed that 1Ce-MIL-101-NH₂ exhibited better adsorption properties of phosphate and As(V) than MIL-101-NH₂. Furthermore, the uptake amounts of phosphate and As(V) reached 341.5 mg/g and 249 mg/g, respectively. Superior uptake amounts for binary phosphate (167.36 mg/g) and As(V) (87.55 mg/g) were achieved with 1Ce-MIL-101-NH₂. Kinetic experiments revealed a higher uptake rate of phosphate than of As(V). FT-IR and XPS analyses showed that the main mechanism for the removal of phosphate and As(V) from water by 1Ce-MIL-101-NH₂ was the formation of an Fe/CeOP inner complex through ligand complexation and electrostatic attraction. Furthermore, 1Ce-MIL-101-NH₂ exhibited high selectivity and excellent efficiency in removing phosphate and As(V) in contaminated spring water in the presence of competing anions; this further confirms the application potential of the novel adsorbent.

Carbonaceous materials for removal and recovery of phosphate species: Limitations, successes and future improvement

The carbonaceous materials have gained significant interest for the phosphorus species remediation and recovery in the last decade. Carbonaceous materials present many unique features, such as cost effective, availability, environmentally friendly, and high removal efficiency that make them a promising adsorbent. In this review, the recent application of carbonaceous materials including activated carbon (AC), graphene and graphene oxide (GO), lignin, carbon nanotubes (CNTs), and gC₃N₄ for phosphate removal and recovery were comprehensively summarized. The kinetics and isotherm models, removal mechanisms, and effects of operating parameters are reported. The reusability, lifetime of carbonaceous materials, and impact of modification were also considered. The modified carbonaceous materials have significantly high phosphate adsorption capacity compared to unmodified adsorbents. Namely, MgO-functionalized lignin-based bio-charcoal exhibited a 906.8 mg g^-1 of capacity as the highest one among other reviewed materials. The modification of carbonaceous materials with various elements has been presented to improve the surface functional groups, surface area and charge, and pore volume and size. Among these loaded elements, iron has been effectively used to provide a prospect for magnetic recovery of the adsorbent as well as increase phosphate adsorption. Furthermore, the phosphate recovery methods, phosphate removal efficiency of carbonaceous materials, the limitations, important gaps in the literature, and future studies to enhance applicability of carbonaceous materials in real scale are also discussed.

Recent advances and challenges on removal and recycling of phosphate from wastewater using biomass-derived adsorbents

As the severe damage of phosphate enrichment in the water ecosystem and the supply shortage of phosphate rock, developing an efficient method for the removal and recycling of phosphate from wastewater is of great significance. To achieve this goal, adsorption technology has been widely investigated, and various adsorbents were developed. Among them, the biomass-derived adsorbents including biomass-derived carbon-based materials, biomass-based anion exchangers and metal-biomass composites have attracted increasing attention over the past years due to the low cost, abundant renewable raw materials and environmental friendliness. However, different adsorbents usually exhibit variable adsorption performances for phosphate, which highly depends on their design strategies, preparation methods and potential adsorption mechanisms. Thus, this review comprehensively summarizes the recent researches on the removal and recycling of phosphate from wastewater using the biomass-derived adsorbents. Especially, the design strategies, preparation methods, adsorption performances and mechanisms of these reported biomass-derived adsorbents are discussed in detail. Moreover, as the significant strategies to recover and recycling phosphate, the elution and direct use of phosphate-loaded adsorbents as fertilizers are also presented. Although the excellent adsorption performance has been obtained, some challenges are still existing, which should be given more attention in the following researches to facilitate the development and industrial application of biomass-derived adsorbents.

Graphene-Based Composites for Phosphate Removal

A variety of methods, including chemical precipitation, biological phosphorus elimination, and adsorption, have been described to effectively eliminate phosphorus (P) in the form of phosphate (PO₄ ^3-) from wastewater sources. Adsorption is a simple and easy method. It shows excellent removal performance, cost effectiveness, and the substantial option of adsorbent materials. Therefore, it has been recognized as a practical, environmentally friendly, and reliable treatment method for eliminating P. Nanocomposites have been deployed to remove P from wastewater via adsorption. Nanocomposites offer low-temperature alteration, high specific surface area, adjustable surface chemistry, pore size, many adsorption sites, and rapid intraparticle diffusion distances. In this Mini-Review, we have aimed to summarize the last eight years of progress in P removal using graphene-based composites via adsorption. Ultimately, future perspectives have been presented to boost the progress of this encouraging field.

Phosphate sequestration by magnetic La-impregnated bentonite granules: A combined experimental and DFT study

To use the lanthanum hydroxide (La(OH)₃) as a low-cost, highly-efficient, and recyclable adsorbent, it could be embedded on a magnetic substance to improve its physical features and lower the overall cost. Herein, novel millimetric-size magnetic lanthanum-modified bentonite (La-MB) granules were fabricated for P sequestration, and the adsorption performance and mechanisms were systematic studied. The maximum capacity of P uptake by La-MB was up to 48.4 mg/g, which was higher than many previous reported La-based adsorbents. Moreover, the enhanced uptake of P was achieved over a wide pH range (3-9) and in the coexistence of common anions (Cl^-, NO₃^-, and SO₄^2-). Besides, the exhausted La-MB can be effectively regenerated by 5 mol/L NaOH with about 94.5% desorption efficiency and 60.8% uptake capacity remained during 5 cycles. The La-MB also exhibited excellent performance of anti-interference in two kinds of real wastewaters. The postsorption characterization and DFT calculations revealed that the electrostatic interaction and chemical precipitation jointly facilitated phosphate sequestration by La-MB during the rapid sorption phase, while ligand exchange and complexation reaction played more important roles than others during the slow sorption step. The electrostatic interaction not only effectively promoted the ligand exchange, and also further accelerated chemical precipitation via the formation of LaPO₄ during the whole process of phosphate uptake. Overall, millimetric La-MB is considered to have great potential for engineering application, and this work also provides new insights into the molecular-level mechanism of phosphate sequestration by La-MB.

Adsorptive removal of phosphate by the bimetallic hydroxide nanocomposites embedded in pomegranate peel

This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption. Two types of adsorbent materials, the zirconium hydroxides embedded in pomegranate peel (Zr/Peel) and zirconium-lanthanum hydroxides embedded in pomegranate peel (Zr-La/Peel) were developed. Scanning electronic microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and x-ray diffraction (XRD) were evaluated to give insight into the physicochemical properties of these adsorbents. Zr-La/Peel exceeded the adsorption efficiency of Zr/Peel adsorbents in batch adsorption experiments at the same pH level. The peel as a host can strive to have a strong "shielding effect" to increase the steadiness of the entrenched Zr and La elements. La and Zr are hydroxide metals that emit many hydrogen ions during the hydrolysis reaction, which contribute to protonation and electrostatic attraction. The highest adsorption capacity of La-Zr/Peel for phosphate was calculated to be 40.21 mg/g, and pseudo second-order equation is very well fitted for kinetic adsorption. Phosphate adsorption efficiency was reduced by an increase of pH. With the background of coexisting Cl^-, little effect on adsorption efficiency was observed, while adsorption capacities were reduced by almost 20-30% with the coexistence of [Formula: see text] , [Formula: see text] and humic acid (HA).

In situ fabrication of hierarchical biomass carbon-supported Cu@CuO-Al2O3 composite materials: synthesis, properties and adsorption applications

Hierarchical Cu-Al2O3/biomass-activated carbon composites were successfully prepared by entrapping a biomass-activated carbon powder derived from green algae in the Cu-Al2O3 frame (H-Cu-Al/BC) for the removal of ammonium nitrogen (NH4 +-N) from aqueous solutions. The as-synthesized samples were characterized via XRD, SEM, BET and FTIR spectroscopy. The BET specific surface area of the synthesized H-Cu-Al/BC increased from 175.4 m2 g-1 to 302.3 m2 g-1 upon the incorporation of the Cu-Al oxide nanoparticles in the BC surface channels. The experimental data indicated that the adsorption isotherms were well described by the Langmuir equilibrium isotherm equation and the adsorption kinetics of NH4 +-N obeyed the pseudo-second-order kinetic model. The static maximum adsorption capacity of NH4 +-N on H-Cu-Al/BC was 81.54 mg g-1, which was significantly higher than those of raw BC and H-Al/BC. In addition, the presence of K+, Na+, Ca2+, and Mg2+ ions had no significant impact on the NH4 +-N adsorption, but the presence of Al3+ and humic acid (NOM) obviously affected and inhibited the NH4 +-N adsorption. The thermodynamic analyses indicated that the adsorption process was endothermic and spontaneous in nature. H-Cu-Al/BC exhibited removal efficiency of more than 80% even after five consecutive cycles according to the recycle studies. These findings suggest that H-Cu-Al/BC can serve as a promising adsorbent for the removal of NH4 +-N from aqueous solutions.

Carboxylation as an effective approach to improve the adsorption performance of graphene materials for Cu2+ removal

Graphene materials are high-performance adsorbents for water and soil remediation, whose oxygen containing groups bind to metal ions intensely. In this study, we prepared carboxylated graphene oxide (GO-OCH₂COOH) sponge and investigated the adsorption behaviors of Cu²⁺ on it by both experimental and computational approaches. Carboxylation largely improved the adsorption capacity from 23.8mg/g for graphene oxide (GO) sponge to 93.8mg/g for GO-OCH₂COOH. The efficient adsorption was due to the strong interaction between Cu²⁺ and carboxyl groups (especially in -OCH₂COOH form) according to the density functional theory calculation, while epoxy and hydroxyl groups contributed lowly. The fast adsorption process was achieved within 30min, corresponding to a large k₂ value of pseudo-second order model (0.061mg/g/min). The adsorption was spontaneous and exothermic according to thermodynamics analyses. The binding strength of Cu²⁺ on GO-OCH₂COOH was so strong that pH and ionic strength had mild impact. The strong binding sites were not recyclable, but the weaker ones (more than 40%) could be regenerated by simple washing. Our results highlighted the importance of chemical design in graphene adsorbents and the potential of GO-OCH₂COOH in heavy metal fixation from water and soil.

Enhanced fluoride uptake by bimetallic hydroxides anchored in cotton cellulose/graphene oxide composites

A novel hybrid nanomaterial was synthesized by embedding the bimetallic Zr and La (hydro)xides onto the cotton cellulose/graphene oxide composites (CC/GO composites), forming the Zr-La-CC/GO nanocomposites. Selective uptake of fluoride onto the Zr-La /GO hybrids in multiple competitive environments were evaluated. Morphological characteristics of Zr-La-CC/GO nanocomposites reflected the well distributions of embedded Zr and La hydroxides in the nanocomposites. Results also indicated that the encapsulated bimetallic hydroxides in Zr-La-CC/GO hybrids exhibited extremely high fluoride adsorption capacity and stability. XPS investigation exhibited the strong ZrF and LaF bonds in spent Zr-La-CC/GO nanocomposites, and the bonds were weakened at higher pH, which was consistent with the adsorption results. In addition, CC/GO composites using as the host could also exert the strong shielding effect to improve the stability of embedded La and Zr species so as only a low La dissolution (<4.2%) and almost no Zr leaching (0.1%) were observed in high HA concentration. What's more, the Zr-La-CC/GO nanocomposites have also shown great potential application for defluoridation in field.