The design of a polyaniline-decorated three dimensional W18O49 composite for full solar spectrum light driven photocatalytic removal of aqueous nitrite with high N2 selectivity

W18O49/MnWO4 heterojunction for highly efficient photocatalytic reduction of CO2 under full spectrum light

Solar-energy-driven CO₂ reduction for chemical reagents production, such as CH₃OH, CH₄ and CO, has tremendous potential for carbon neutrality in the energy industries. However, the low reduction efficiency limits its applicability. Herein, W₁₈O₄₉/MnWO₄ (WMn) heterojunctions were prepared via one-step in-situ solvothermal process. Through this method, W₁₈O₄₉ tightly combined with the surface of MnWO₄ nanofibers to form nanoflower heterojunction. It was found that under full spectrum light irradiation for 4 h, the yields of photoreduction of CO₂ to CO, CH₄ and CH₃OH by 3-1 WMn heterojunction were 61.74, 71.30 and 18.98 μmol/g, respectively, which were 2.4, 1.8 and 1.1 times that of pristine W₁₈O₄₉, and ca.20 times that of pristine MnWO₄ towards CO production. Furthermore, even in the air atmosphere, the WMn heterojunction still performed excellent photocatalytic performance. Systematic investigations demonstrated that the catalytic performance of WMn heterojunction was improved by superior light utilization and more efficient photo-generated carrier separation and migration as compared with W₁₈O₄₉ and MnWO₄. Meanwhile, the intermediate products of the photocatalytic CO₂ reduction process were also studied in detail by in-situ FTIR. Therefore, this study provides a new way for designing high efficiency of heterojunction for CO₂ reduction.

Iron Nanoparticles Protected by Chainmail-structured Graphene for Durable Electrocatalytic Nitrate Reduction to Nitrogen

The electrochemical nitrate reduction reaction (NO₃ RR) is an appealing technology for regulating the nitrogen cycle. Metallic iron is one of the well-known electrocatalysts for NO₃ RR, but it suffers from poor durability due to leaching and oxidation of iron during the electrocatalytic process. In this work, a graphene-nanochainmail-protected iron nanoparticle (Fe@Gnc) electrocatalyst is reported. It displays superior nitrate removal efficiency and high nitrogen selectivity. Notably, the catalyst delivers exceptional stability and durability, with the nitrate removal rate and nitrogen selectivity remained ≈96 % of that of the first time after up to 40 cycles (24 h for one cycle). As expected, the conductive graphene nanochainmail provides robust protection for the internal iron active sites, allowing Fe@Gnc to maintain its long-lasting electrochemical nitrate catalytic activity. This research proposes a workable solution for the scientific challenge of poor lasting ability of iron-based electrocatalysts in large-scale industrialization.

Selective reduction of nitrite to nitrogen by polyaniline-carbon nanotubes composite at neutral pH

The selective reduction of nitrite (NO₂^-) to nitrogen by chemical reductant is a desirable strategy to remove NO₂^- from polluted water and wastewater. However, the residue and reuse of chemical reductant are two main issues to be addressed. Herein, a novel polyaniline-carbon nanotubes composite (PANI-CNTs) was developed by in-situ polymerization to selectively reduce NO₂^- to nitrogen gas (N₂). The used PANI-CNTs could be reused after regeneration with NaBH₄. The PANI-CNTs could reduce NO₂^- with 93.9% N₂ selectivity at initial pH of 6.8. The NO₂^- removal efficiency only decreased by 12.08% after five cycles of reduction/regeneration. The interconversion between imine nitrogen (-N) and amine nitrogen (-NH-) groups induced the chemical reduction of NO₂^- and regeneration of PANI-CNTs. PANI-CNTs exhibited an excellent performance for the removal of NO₂^- in the presence of competitive ions and in actual water and wastewater samples. This new PANI-CNTs composite may have great potential for water purification and wastewater denitrification.

Revisiting the mechanisms of nitrite ions and ammonia removal from aqueous solutions: photolysis versus photocatalysis

Nitrite ions and ammonia are widespread forms of inorganic water pollutants. Nevertheless, the mechanisms of their photolytic and photocatalytic reactions under UV-A irradiation are still fully undisclosed, particularly, at different pH values under aerobic and inert atmospheres. Herein, we have studied the photolytic decomposition of nitrite ions under different conditions using 365 nm UV-A LED as a light source instead of mercury lamps that emit photons in the UV-B region and generate a lot of heat. The results indicated that the rate of nitrite disproportionation in the dark at pH ≤ 3.0 is remarkably high relative to the rate of the photolytic decomposition. At pH ˃ 3, the photolytic reaction is negligible and nitrite ions showed considerable stability. In contrast, the photocatalytic oxidation of nitrite ions over TiO₂ photocatalysts, namely, TiO₂P25, TiO₂UV100, and TiO₂ anatase/brookite mixture proceeds at pH ˃ 3.0. TiO₂ P25 exhibited the highest photocatalytic activity at pH 5. Interestingly, the photolytic simultaneous removal of nitrite ions and ammonia was possible at pH 9.0 in the absence of oxygen (Ar atmosphere). A 42.69 ± 0.66%, 27.75 ± 1.7%, and 32.74 ± 0.59% of nitrogen calculated based on nitrite, ammonia, and both of them, respectively, can be removed after 6 h of UV-A irradiation. The selectivity of N₂ evolution was 77.6%. The nitrogen removal rate was significantly reduced in the presence of TiO₂ photocatalyst evincing that TiO₂ photocatalysis is applicable for nitrite ions oxidation, whereas the photolytic process is better suited for the simultaneous removal of nitrite ions and ammonia.

Preparation of PVDF/CdS/Bi2WO6/ZnO hybrid membrane with enhanced visible-light photocatalytic activity for degrading nitrite in water

In this work, a visible light-driven ternary heterojunction photocatalyst, CdS/Bi₂WO₆/ZnO, was synthesized using hydrothermal, ultrasonic dispersion, and deposition precipitation methods. The results show that photocatalysts with flower-like heterostructures were obtained, which could efficiently separate electron-hole pairs, and the photocatalytic activity was thereby significantly enhanced. Furthermore, CdS/Bi₂WO₆/ZnO and polyvinylidene fluoride (PVDF) were used to fabricate hybrid membranes via a phase-conversion method. The samples were characterized using SEM, TEM, EDX, XRD, DRS, XPS, PL, and N₂ adsorption-desorption isotherms, and the transient photocurrent response. The photocatalytic activity of the hybrid membrane was evaluated, and 92.58% of the nitrite was converted into non-toxic substances within 4 h under simulated sunlight irradiation. This result indicated that the photocatalyst exhibited a good photocatalytic activity after immobilization. The possible mechanism was elucidated by studying the product during the photocatalytic degradation, and the effects of different pH values, electron scavengers, and hole scavengers on the photocatalytic performance were further investigated.

Sepiolite supported BiVO4 nanocomposites for efficient photocatalytic degradation of organic pollutants: Insight into the interface effect towards separation of photogenerated charges

Although the construction of clay-supported photocatalyst is a promising strategy to develop the low cost and high activity photocatalyst, only few works researched the effect of their interfaces on the photocatalytic performance. Herein, a monoclinic BiVO₄/sepiolite nanocomposite was fabricated as case to study the transport mechanism of photogenerated carries based on the interfaces effect. The obtained BiVO₄/sepiolite nanocomposites exhibited excellent visible light photocatalytic performance. The photocatalytic degradation rates of antibiotic tetracyclines (TCs) and methylene blue (MB) by the nanocomposites are 2 and 5.34 times higher than that by pure BiVO₄ under visible light irradiation. XPS and Raman spectra confirmed the strong interfaces effect existing between BiVO₄ and sepiolite clay. Moreover, PL and transient photocurrent response suggested that the strong interfaces effect effectively promoted the separation of photogenerated electron-hole pairs and further enhanced the photocatalytic performance. In addition, the results of trapping experiments revealed that the photo-induced holes (h⁺) were the dominant active species in the photocatalytic mechanism. This work illuminates the photocatalytic mechanism of monoclinic BiVO₄/sepiolite nanocomposites and provides a novel strategy for designing the clay-supported photocatalyst for degradation of organic pollutants.

TiO2-based catalysts for photocatalytic reduction of aqueous oxyanions: State-of-the-art and future prospects

Nowadays, an increasing discharge of oxyanions to the natural environment has been attracting worldwide attention. TiO₂-based photocatalysis is regarded as one of the most promising technologies for the conversion of toxic oxyanions (such as chromate, nitrate, nitrite, bromate, perchlorate and selenate) to harmless and/or less toxic substances in contaminated waters. Various types of TiO₂-based catalysts have been developed, and each of them exhibits its own advantages in catalytic reduction of oxyanions. However, the application of these nanostructured TiO₂ in real water bodies remains a challenge, with limitations associated with sunlight harvesting abilities, production costs, reuse stability and exposure risks. Herein, we aim to present a critical review on reported TiO₂-based photocatalytic reduction of aqueous oxyanions, provide a comprehensive understanding of the possible reaction pathways of formed active species, and evaluate the reduction performance of different types of TiO₂-based catalysts. In addition, the impact of operating parameters (such as solution pH, temperature, dissolved oxygen and coexisting substances) on catalytic reduction performance is discussed. Furthermore, the perspectives of TiO₂-based photocatalytic reduction of oxyanions are also proposed.

The synergistic effect of Ag/AgCl@ZIF-8 modified g-C3N4 composite and peroxymonosulfate for the enhanced visible-light photocatalytic degradation of levofloxacin

In this work, a series of Ag/AgCl@ZIF-8 modified g-C₃N₄ composites were synthesized and used to degrade levofloxacin (LVFX) in water under visible light irradiation with the assistant of peroxymonosulfate (PMS). The morphologies and physicochemical properties of the materials were characterized by SEM, TEM, XRD, XPS, FTIR, and DRS technologies. The results of photocatalytic experiments showed that in the presence of PMS, the degradation rate of LVFX reached 87.3% in 60min. Furthermore, factors affecting photocatalytic efficiency such as the concentration of PMS, photocatalyst dosage and different pH values were investigated. The degradation products of LVFX were analyzed by LC-MS and the degradation pathway was inferred. Active species trapping experiments indicated that O₂^-, h⁺ and SO₄^- played important roles in the degradation process in the presence of PMS and the possible degradation mechanism was put forward. This work provides a photocatalyst system that is beneficial to the separation of photogenerated carriers and demonstrates the great potential of PMS-assisted photocatalysis in the purification of organic pollutants.