Self-immobilized biomixture with pellets of Aspergillus niger Y3 and Arthrobacter. sp ZXY-2 to remove atrazine in water: A bio-functions integration system

A fungal-algal self-flocculation system and its application to treat filter sludge leachate in the sugar industry

The efficient and economical treatment of wastewater using microalgae has attracted much attention. However, harvesting microalgae cells from treated wastewater remains challenging. In the present study, a Chlorella vulgaris suspension containing filamentous fungi Aspergillus niger and Chaetomium gracile was successfully used to construct a self-flocculating system, with a microalgae flocculation efficiency of 99.6% achieved by gravity sedimentation within 4 h. The diameter of fungi played an important role in determining flocculation efficiency, and the optimal particle size was 10 mm. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) results indicated that the sweeping action of fungal mycelia and the interaction between the functional groups of fungi and the C. vulgaris surface contributed to improve flocculation. Co-cultivation of C. vulgaris and fungi could effectively remove 83.53%, 94.45% and 76.88% of total phosphorus, total nitrogen and chemical oxygen demand, respectively, from the sludge leachate from a sugar mill. The fungal-algal biomass reached 5.75 g/L. Herein, the constructed self-flocculation system had coupled efficient flocculation of C. vulgaris with removal of pollutants from wastewater in a short period of time, and providing a green, pollution-free, low-cost method for simultaneous wastewater treatment and the production of high quality biomass.

Functional fungal pellets self-immobilized by mycelium fragments of Irpex lacteus WRF-IL for efficient degradation of sulfamethazine as the sole carbon source

In order to achieve an efficient microbial material with dual functions of self-immobilization and sulfamethazine (SMZ) degradation, this study explored the pelletization technique utilizing mycelium fragments of Irpex lacteus WRF-IL and systematically examined the pellets formation conditions and degradation capability. The Box-Behnken design results demonstrated that pure mycelium fragments, broken by frosted glass beads, could be rapidly self-immobilized to form white rot mycelial pellets (WRMPs) within 24 h, serving as the pelleting core. These WRMPs could completely remove SMZ as the sole carbon source within 20 h. The addition of sucrose expedited this process, achieving complete removal within only 14 h. Kinetic analysis showed that WRMPs could potentially remove SMZ at higher concentrations (>25 mg/L). Biodegradation was the primary pathway of SMZ removal. Seven intermediates were identified by QTOF LC/MS, and three transformation pathways initiated by SO₂ overflow, molecular rearrangement, and aniline moiety oxidation were deduced.

Effect of fungal pellets on denitrifying bacteria at low carbon to nitrogen ratio: Nitrate removal, extracellular polymeric substances, and potential functions

This research aims to elucidate the effect of fungal pellets (FP) on denitrifying bacteria regarding nitrate (NO₃^--N) removal, extracellular polymeric substances (EPS), and potential functions at a low carbon to nitrogen (C/N) ratio. A symbiotic system of FP and denitrifying bacteria GF2 was established. The symbiotic system showed 100% NO₃^--N removal efficiency (4.07 mg L^-1 h^-1) at 6 h and enhanced electron transfer capability at C/N = 1.5. The interactions between FP and denitrifying bacteria promoted the production of polysaccharides (PS) in EPS. Both the increased PS and the PS provided by FP as well as protein and humic acid-like substances in EPS could be consumed by denitrifying bacteria. FP acted as a protector and provided habitat and nutrients for denitrifying bacteria as well as improved the ability of carbohydrate metabolism, amino metabolism, and nitrogen metabolism of denitrifying bacteria. This study provides a new perspective on the relationship between FP and denitrifying bacteria.

Construction and comparison of synthetic microbial consortium system (SMCs) by non-living or living materials immobilization and application in acetochlor degradation

The microbial degradation of pesticides by pure or mixed microbial cultures has been thoroughly explored, however, they are still difficult to apply in real environmental remediation. Here, we constructed a synthetic microbial consortium system (SMCs) through the immobilization technology by non-living or living materials to improve the acetochlor degradation efficiency. Rhodococcus sp. T3-1, Delftia sp. T3-6 and Sphingobium sp. MEA3-1 were isolated for the SMCs construction. The free-floating consortium with the composition ratio of 1:2:2 (Rhodococcus sp. T3-1, Delftia sp. T3-6 and Sphingobium sp. MEA3-1) demonstrated 94.8% degradation of acetochlor, and the accumulation of intermediate metabolite 2-methyl-6-ethylaniline was decreased by 3 times. The immobilized consortium using composite materials showed synergistic effects on the acetochlor degradation with maximum degradation efficiency of 97.81%. In addition, a novel immobilization method with the biofilm of Myxococcus xanthus DK1622 as living materials was proposed. The maximum 96.62% degradation was obtained in non-trophic media. Furthermore, the immobilized SMCs showed significantly enhanced environmental robustness, reusability and stability. The results indicate the promising application of the immobilization methods using composite and living materials in pollutant-contaminated environments.

Enhanced removal of fluoride, nitrate, and calcium using self-assembled fungus-flexible fiber composite microspheres combined with microbially induced calcium precipitation

Self-assembled fungus-flexible fiber composite microspheres (SFFMs) were firstly combined with microbially induced calcium precipitation (MICP) in a continuous-flow bioreactor and achieved the efficient removal of fluoride (F^-), nitrate (NO₃^-), and calcium (Ca²⁺). Under the influent F^- of 3.0 mg L^-1, pH of 7.0, and HRT of 8 h, the average removal efficiencies reached 77.54%, 99.39%, and 67.25% (0.29, 2.03, and 8.34 mg L^-1 h^-1), respectively. Fluorescence spectrum and flow cytometry analyses indicated that F^- content significantly affected the metabolism and viability of bacteria. SEM images showed that flexible fibers and intertwined hyphae provided effective locations for bacterial colonization in SFFMs. The precipitated products were characterized by XRD and FTIR, which revealed that F^- was mainly removed in the form of calcium fluoride and calcium fluorophosphate (CaF₂ and Ca₅(PO₄)₃F). High-throughput analysis at different levels demonstrated that Pseudomonas sp. WZ39 acted as the core strain, which played a crucial role in the bioreactor. The mechanism of enhanced denitrification was attributed to minor F^- stress and bioaugmentation technology. This study highlighted the superiorities of SFFMs and MICP combined remediation and documented a promising option for F^-, NO₃^-, and Ca²⁺ removal.

Asymmetric interaction and concurrent remediation of copper and atrazine by Acorus tatarinowii in an aquatic system

To clarify the influence of organic pesticides on phytoremediation of potentially toxic metal elements, hydroponically-grown Acorus tatarinowii was used to repair copper pollution at six concentration levels with and without atrazine. Removal outcomes and processes exhibited asymmetry in an aquatic system. In plants, the addition of atrazine brought as much as 20.5% copper than control. Total amounts, percentage of protein or pectin combined copper and leaf: root ratio of copper were enhanced correspondingly. In solutions, cupric ions (Cu²⁺) were eliminated as much as 95.6% in plant remediation system. Though atrazine resulted in a quarter more absorption equilibrium concentration, the absorption reaction rate half declined. Copper removal in the system was contributed by both bound copper in solution and plant accumulation, and atrazine magnified contribution weight of the later one. Concurrent copper decreased absolute and relative amounts of atrazine in A. tatarinowii, indicating the influence of copper was mainly to reduce atrazine uptake by A. tatarinowii rather than to change the transformation of atrazine in plants. Copper exhibited antagonistic effects with atrazine in term of plant biomass, photosynthesis and oxidative-related responses (malondialdehyde, Ca, Fe and Mn), which might give support to asymmetry interaction between copper and atrazine accumulation in A. tatarinowii.

A review on mycelial pellets as biological carriers: Wastewater treatment and recovery for resource and energy

Mycelial pellets, a new environment friendly biological carrier, have received wide attention from researchers due to porosity, stability and unique biocompatibility. In this article, the theoretical basis and mechanism of mycelial pellets as a biological carrier were analyzed from the properties of mycelial pellets and the interaction between mycelial pellets and other microorganisms. This article aims to collate and present the current application and development trend of mycelial pellets as biological carriers in wastewater treatment, resource and energy recovery, especially the symbiotic particle system formed by mycelial pellets and microalgae is an important way to break through the technical bottleneck of biodiesel recovery from wastewater. This review also analyzes the research hotspots and trends of mycelial pellets as carriers in recent years, discusses the challenges faced by this technology, and puts forward corresponding solutions.

Degradation of the typical herbicide atrazine by UV/persulfate: kinetics and mechanisms

Atrazine (ATZ), a widely used herbicide, had received a significant amount of attention due to its widespread detection in aquatic environments as well as its potential risks to human health. UV/persulfate (PS) process is an emerging technology for degrading organic pollutants in water. Thus, the degradation of ATZ by a UV/PS process was investigated in this study. The results showed that the removal rate of ATZ was 98.4% with a PS dosage of 2 mg/L and an initial ATZ concentration of 0.1 mg/L. In addition, a relatively high degradation efficiency was obtained under pH = 7. However, the addition of humic acid (HA) reduced the removal rate of ATZ. Hydroxyl radicals (•OH) and sulfate radicals (•SO₄^-) respectively contributed to 21.7% and 29% of the ATZ degradation. The ATZ degradation pathway was proposed, and the main reactions of ATZ in this UV/PS process included dechlorination, demethylation, and deethylation. Moreover, the toxicity of ATZ and its degradation products was assessed using the Toxicity Estimation Software Tool (TEST), and the results showed that the toxicity of the ATZ solution was reduced after the UV/PS process. These results indicate that UV/PS shows good promise as a remediation technique for the treatment of persistent herbicides such as ATZ in contaminated water.

Effects of microplastics of different sizes on the Chlorella vulgaris - Ganoderma lucidum co-pellets formation processes

The effects of different sized MPs on the formation process of algal-fungal co-pellets were studied. The results show that a maximum biomass recovery of 70.96% and a minimum F_v/F_m ratio of 0.463 reached with 5.000 μm-microplastics. Chlorella vulgaris cells and microplastics adhered evenly to the mycelia of Ganoderma lucidum. The contact angle decreased 24.02% and 34.68% with addition of 0.065 μm and 0.500 μm microplastics, respectively, compared to the control group, while the lowest crystallinity index (7.05%) was obtained with 0.065 μm-microplastics addition. Moreover, 5.000 μm microplastics promoted the extracellular polymeric substances (EPS) secretion, with the soluble polysaccharide content increasing by 40.50% and the soluble protein content increasing by 23.25% compared with the single algal-fungal system, while bound polysaccharides increased by 113.26% and bound proteins increased by 29.48%. The 5.000 μm microplastics also significantly promoted enzyme activity in the co-pellets. These results provide a theoretical basis for algal recovery in microplastic-containing water.

Denitrifying bacteria immobilized magnetic mycelium pellets bioreactor: A new technology for efficient removal of nitrate at a low carbon-to-nitrogen ratio

This study integrated spores and magnetite (Fe₃O₄) to form magnetic mycelium pellets (MMP) as bio-carriers immobilized with denitrifying bacteria in a bioreactor. Different carbon-to-nitrogen (C/N) ratios and hydraulic retention time (HRT) were established for investigating the performance of the bioreactor. The nitrate removal efficiency was 98.14% at C/N = 2.0 and HRT = 6 h. Gas chromatography (GC) results indicated that the main component of the produced gas was N₂. Fe₃O₄ was well-integrated into MMP according to X-ray diffraction (XRD) results and infrared spectrometer (FTIR) analysis. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) showed that bacteria were successfully immobilized on MMP. Fluorescence excitation-emission matrix (EEM) indicated that functional bacteria GF2 might enhance the metabolic activity of the microbial community in the bioreactor and microbial activity was highest at C/N = 2.0. Pseudomonas stutzeri sp. GF2 might be immobilized and had a major role in the bioreactor according to high throughput sequencing results.

Self-assembled fungus-biochar composite pellets (FBPs) for enhanced co-sorption-biodegradation towards phenanthrene

Sorption and biodegradation are two major applicable techniques for organic pollutants removal. However, the desorption risk following the sorption process and the low bioavailability of trace pollutants to microbes are still hindering the efficient removal of pollutants. To take full advantages of both sorption (for contaminant accumulation) and microbial degradation, here we introduce a self-assembly method combining carbonaceous sorbents (i.e., biochars: RS350, RS500, and RS700) with fungal hyphae (Phanerochaete chrysosporium) which can efficiently degrade phenanthrene (PHE), one of the typical polycyclic aromatic hydrocarbons. By cultivating Phanerochaete chrysosporium in biochar-containing medium, fungus-biochar composite pellets (FBPs) were successfully synthesized with a 3D macrostructure of abundant hyphae and uniform pellet size (~2.5 mm in diameter). Benefiting from the high sorption ability of biochars, such FBPs showed up to triple sorption ability and 70 folds faster biodegradation rate than pure fungal pellets. The PHE concentration remaining in solution receiving co-sorption-degradation treatment after 22 d was only one third of that receiving sorption treatment alone. Continuous removal experiment indicated that these composite pellets could hold their removal ability of above 90 % in the first 4 cycles. This study points out a simple and promising self-assembly approach that could be easily scaled up to manufacture FBPs with high removal efficiency, fast biodegradation rate, easy separation ability and long-term stability.

Self-immobilized biochar fungal pellet combined with bacterial strain H29 enhanced the removal performance of cadmium and nitrate

A newly isolated strain Phoma sp. ZJ6, which could form fungal pellet (FP) by self-immobilization, was identified. A novel longan seed biochar embedded in FP (BFP) combined with strain H29 (BFP-H29) effectively improved the Cd(II) removal efficiency and simultaneously removed nitrate. The adsorption process of BFP was well fitted with the pseudo-second-order kinetics model and Langmuir isotherm model, which demonstrated that the adsorption process was favorable and mainly dominated by chemisorption. Compared with single FP, biochar, and strain H29, BFP-H29 significantly enhanced the Cd(II) removal and the removal ratio reached 90.47%. Meanwhile, the simultaneous removal efficiency of the BFP-H29 for nitrate could reach 93.80%. Characterization analysis demonstrated that the primary removal mechanisms of BFP-H29 were precipitation and surface complexation. BFP-H29 had excellent performance in simultaneous removal of Cd(II) and nitrate, indicating its potential as a promising composite in the removal of cadmium and nitrate in wastewater.

Enhanced biodegradation of organophosphorus insecticides in industrial wastewater via immobilized Cupriavidus nantongensis X1T

Chlorpyrifos is an important organophosphorus insecticide. It is highly toxic to mammals and can pollute the environment. Cupriavidus nantongensis X1^T can efficiently degrade chlorpyrifos. Immobilization technology can also improve the viability, stability and catalytic ability of bacteria. In this study, strain X1^T was, therefore, captured on various composite immobilized carriers, sodium alginate (SA), diatomite (KLG), chitosan (CTS) and polyvinyl alcohol (PVA). The four types of immobilized beads (SA, SA + KLG, SA + CTS and SA + PVA) could form a slice and honeycomb structure to capture strain X1^T. The results showed that SA + CTS (SC) was an optimal material combination for the immobilization of strain X1^T to degrade chlorpyrifos. Compared with SA-X1^T, after adding CTS, the specific surface area and adsorption capacity for chlorpyrifos were increased 3.4 and 1.7 fold, respectively. SC-X1^T could degrade 96.6% of chlorpyrifos at 20 mg/L within 24 h and the degradation rate constant was 4.8 fold greater than immobilized strain LLBD2, a well-studied chlorpyrifos-degrading strain. The immobilized beads SC-X1^T also showed a more stable and greater degradation ability than X1^T free cells for chlorpyrifos in industrial wastewater. The synergy of adsorption and degradation of immobilized strain X1^T is suitable for in-situ remediation of chlorpyrifos contaminated environment.

The adsorption mechanisms of algae-bacteria symbiotic system and its fast formation process

The formation process of the algae-bacteria symbiotic system (ABSS) was analyzed, and the formation adsorption conditions were optimized. The role of extracellular polymeric substances (EPS), specific surface area and zeta potential in adsorption mechanisms were assessed and proposed. The results showed the dry weight of the ABSS and adsorption efficiency of microalgae reached the highest under the conditions of 25 °C, pH 6.0, 160 rpm and CaCl₂ 2.0 mg/mL. The process of the ABSS formation could be mainly divided into the fast stage and slow stage. The roles of EPS, specific surface area and zeta potential accounted for 84.22%, 5.17% and 10.61% of the adsorption capacity, respectively. EPS dominated the formation of the ABSS. The results indicated that mycelial pellets were biosorption materials and had the characteristics of chemical materials.

Biodegradation of Atrazine by Mixed Bacteria of Klebsiella variicola Strain FH-1 and Arthrobacter sp. NJ-1

The purpose of this study is to enhance the biodegradability of atrazine with FH-1 and NJ-1 alone by selecting the mixing ratio, optimizing the culture medium and conditions. The results showed that FH-1 and NJ-1 have the best biodegradation effect on atrazine being mixed in a volume ratio of 3:2. In a single factor experiment, sucrose and NH₄Cl provided carbon and nitrogen sources for the mixed bacteria. Subsequently, composition of fermentation medium was further optimized using Box-Behnken design of response surface methodology. Based on the results, growth of mixed bacteria and biodegradation of atrazine performed best effects with a biodegradation rate of 85.6% when sucrose and NH₄Cl amounts were 35.30 g/L and 10.28 g/L. The optimal medium condition was 10% inoculum of mixed bacteria, with initial atrazine concentration of 50 mg/L, neutral or weakly alkaline pH value, 30°C. The biodegradation rate reached 97.4%, 11.8% higher than the unoptimized condition.

A bio-functions integration microcosm: Self-immobilized biochar-pellets combined with two strains of bacteria to remove atrazine in water and mechanisms

A self-immobilization method for microorganisms was developed based on fungal pellets. Generally, pellets have some problems such as cell leakage, cell loading limitation and low mechanical strength. Therefore, biochar was applied to overcome these disadvantages. Atrazine degradable microorganism Arthrobacter sp. ZXY-2 was immobilized by Aspergillus niger Y3 pellets. After adding biochar with optimal dosage (0.006 g biochar for 0.3 g pellets with ZXY-2), the self-immobilized biomixture (SIB) removed 50 mg /L atrazine rapidly within 1 h, which was 61% higher compared to pellets without biochar. The kinetic adsorption results showed that the biosorption of biochar by pellets followed a pseudo-second-order kinetic model. The ATZ removal ability and reusability of SIB were significantly increased by biochar. The results showed that the addition of biochar could enhance the connection between ZXY-2 and pellets based carrier, and the favorable biodegradation pH of ZXY-2 changed to 6 and 10. Several analyses such as ζ-potential measurements, FTIR, XPS, SEM-EDS, and elemental analyses were performed to evaluate the mechanism of action of SIB. To enhance the ATZ degradation by single strain, Agrobacterium, sp WL-1 was isolated and added. The metabolic pathways and their function complementation were studied. Furthermore, a biomass integration model for wastewater treatment was proposed herein.

A Review on Recent Treatment Technology for Herbicide Atrazine in Contaminated Environment

Atrazine is a kind of triazine herbicide that is widely used for weed control due to its good weeding effect and low price. The study of atrazine removal from the environment is of great significance due to the stable structure, difficult degradation, long residence time in environment, and toxicity on the organism and human beings. Therefore, a number of processing technologies are developed and widely employed for atrazine degradation, such as adsorption, photochemical catalysis, biodegradation, etc. In this article, with our previous research work, the progresses of researches about the treatment technology of atrazine are systematically reviewed, which includes the four main aspects of physicochemical, chemical, biological, and material-microbial-integrated aspects. The advantages and disadvantages of various methods are summarized and the degradation mechanisms are also evaluated. Specially, recent advanced technologies, both plant-microbial remediation and the material-microbial-integrated method, have been highlighted on atrazine degradation. Among them, the plant-microbial remediation is based on the combined system of soil-plant-microbes, and the material-microbial-integrated method is based on the synergistic effect of materials and microorganisms. Additionally, future research needs to focus on the excellent removal effect and low environmental impact of functional materials, and the coordination processing of two or more technologies for atrazine removal is also highlighted.